From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754600AbeENPjX (ORCPT ); Mon, 14 May 2018 11:39:23 -0400 Received: from [195.159.176.226] ([195.159.176.226]:59875 "EHLO blaine.gmane.org" rhost-flags-FAIL-FAIL-OK-OK) by vger.kernel.org with ESMTP id S1752416AbeENPjU (ORCPT ); Mon, 14 May 2018 11:39:20 -0400 X-Injected-Via-Gmane: http://gmane.org/ To: linux-kernel@vger.kernel.org From: Grant Edwards Subject: Re: serial: custom baud rate Date: Mon, 14 May 2018 15:36:56 +0000 (UTC) Message-ID: References: <20180513205726.5029c88a@alans-desktop> X-Complaints-To: usenet@blaine.gmane.org User-Agent: slrn/1.0.2 (Linux) Cc: linux-serial@vger.kernel.org Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 2018-05-13, Alan Cox wrote: > On Thu, 3 May 2018 18:27:14 +0000 (UTC) > Grant Edwards wrote: > >> On 2018-05-03, Muni Sekhar wrote: >> >> > If I need to set a custom baud rates(e.g. 14400, 128000, 256000), does >> > Linux serial framework has any supporting method? >> >> Sure, use the termios2 structure instead of the termios structure: >> >> #include >> >> struct termios2 t; >> >> ioctl(fd, TCGETS2, &t) >> >> t.c_cflag &= ~CBAUD; >> t.c_cflag |= BOTHER; >> t.c_ispeed = baud; >> t.c_ospeed = baud; >> >> ioctl(fd, TCSETS2, &t) >> >> [Not all devices/drivers support termios2] > > That shouldn't be true - all devices get passed ispeed/ospeed and > everything in tree was using the correct fields as far as I could > tell last time I checked this Yep, my mistake. It looks like the driver where I last ran into this was an old out-of-tree driver. -- Grant Edwards grant.b.edwards Yow! Mary Tyler Moore's at SEVENTH HUSBAND is wearing gmail.com my DACRON TANK TOP in a cheap hotel in HONOLULU!