From: Takashi Iwai <tiwai@suse.de>
To: Bryan Quigley <gquigs@gmail.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: PROBLEM: Pulseaudio hung at schedule in 3.15-rc1
Date: Fri, 02 May 2014 09:36:32 +0200 [thread overview]
Message-ID: <s5h61loskcf.wl%tiwai@suse.de> (raw)
In-Reply-To: <CAAWf5=s=jrUa2wi6z5djW4rWA-PUS0q5pN3jU+ph0s8vxu65GQ@mail.gmail.com>
At Wed, 30 Apr 2014 13:40:11 -0400,
Bryan Quigley wrote:
>
> > Hm, what about the one below instead?
> >
> >
> > Takashi
>
> It works now! Still gives me some errors, but both the webcam and
> microphone function fine..
>
> On pluging it in, all seems normal:
> Apr 30 13:33:29 dell-laptop kernel: [ 467.144143] usb 2-2: new
> high-speed USB device number 4 using ehci-pci
> Apr 30 13:33:30 dell-laptop kernel: [ 467.492931] usb 2-2: New USB
> device found, idVendor=046d, idProduct=0825
> Apr 30 13:33:30 dell-laptop kernel: [ 467.492939] usb 2-2: New USB
> device strings: Mfr=0, Product=0, SerialNumber=2
> Apr 30 13:33:30 dell-laptop kernel: [ 467.492943] usb 2-2:
> SerialNumber: 0911F220
> Apr 30 13:33:30 dell-laptop kernel: [ 467.493799] uvcvideo: Found UVC
> 1.00 device <unnamed> (046d:0825)
> Apr 30 13:33:30 dell-laptop kernel: [ 467.590713] input: UVC Camera
> (046d:0825) as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/input/input20
> Apr 30 13:33:31 dell-laptop kernel: [ 468.753801] usb 2-2: set
> resolution quirk: cval->res = 384
>
> But on any access (sudo lsusb -v, open webcam, etc), it will give:
> Apr 30 13:35:21 dell-laptop kernel: [ 578.788135] usb 2-2: reset
> high-speed USB device number 4 using ehci-pci
> Apr 30 13:35:21 dell-laptop kernel: [ 579.142380] snd-usb-audio
> 2-2:1.2: reset_resume error -5
>
> Doesn't seem to affect performance at all though..
OK, the error above comes from my patch returning an error at auto
suspend callback. How about the revised patch below?
thanks,
Takashi
---
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 893d5a1afc3c..c3b5b7dca1c3 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -651,7 +651,7 @@ int snd_usb_autoresume(struct snd_usb_audio *chip)
int err = -ENODEV;
down_read(&chip->shutdown_rwsem);
- if (chip->probing)
+ if (chip->probing && chip->in_pm)
err = 0;
else if (!chip->shutdown)
err = usb_autopm_get_interface(chip->pm_intf);
@@ -663,7 +663,7 @@ int snd_usb_autoresume(struct snd_usb_audio *chip)
void snd_usb_autosuspend(struct snd_usb_audio *chip)
{
down_read(&chip->shutdown_rwsem);
- if (!chip->shutdown && !chip->probing)
+ if (!chip->shutdown && !chip->probing && !chip->in_pm)
usb_autopm_put_interface(chip->pm_intf);
up_read(&chip->shutdown_rwsem);
}
@@ -695,8 +695,9 @@ static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message)
chip->autosuspended = 1;
}
- list_for_each_entry(mixer, &chip->mixer_list, list)
- snd_usb_mixer_suspend(mixer);
+ if (chip->num_suspended_intf == 1)
+ list_for_each_entry(mixer, &chip->mixer_list, list)
+ snd_usb_mixer_suspend(mixer);
return 0;
}
@@ -711,6 +712,8 @@ static int __usb_audio_resume(struct usb_interface *intf, bool reset_resume)
return 0;
if (--chip->num_suspended_intf)
return 0;
+
+ chip->in_pm = 1;
/*
* ALSA leaves material resumption to user space
* we just notify and restart the mixers
@@ -726,6 +729,7 @@ static int __usb_audio_resume(struct usb_interface *intf, bool reset_resume)
chip->autosuspended = 0;
err_out:
+ chip->in_pm = 0;
return err;
}
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 25c4c7e217de..91d0380431b4 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -40,6 +40,7 @@ struct snd_usb_audio {
struct rw_semaphore shutdown_rwsem;
unsigned int shutdown:1;
unsigned int probing:1;
+ unsigned int in_pm:1;
unsigned int autosuspended:1;
unsigned int txfr_quirk:1; /* Subframe boundaries on transfers */
next prev parent reply other threads:[~2014-05-02 7:36 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-19 17:20 PROBLEM: Pulseaudio hung at schedule in 3.15-rc1 Bryan Quigley
2014-04-20 6:08 ` Takashi Iwai
2014-04-20 18:50 ` Bryan Quigley
2014-04-29 14:21 ` Takashi Iwai
2014-04-29 18:04 ` Bryan Quigley
2014-04-30 6:42 ` Takashi Iwai
2014-04-30 16:10 ` Bryan Quigley
2014-04-30 16:36 ` Takashi Iwai
2014-04-30 17:40 ` Bryan Quigley
2014-05-02 7:36 ` Takashi Iwai [this message]
2014-05-02 14:33 ` Bryan Quigley
2014-05-07 21:15 ` Ed Tomlinson
-- strict thread matches above, loose matches on Subject: below --
2014-04-19 5:08 Bryan Quigley
2014-04-19 6:04 ` Bryan Quigley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5h61loskcf.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=gquigs@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox