From: Takashi Iwai <tiwai@suse.de>
To: "Kai-Heng Feng" <kai.heng.feng@canonical.com>
Cc: <mario.limonciello@dell.com>, <pali.rohar@gmail.com>,
<andy@infradead.org>, <dvhart@infradead.org>,
<mjg59@srcf.ucam.org>, <alsa-devel@alsa-project.org>,
<linux-kernel@vger.kernel.org>,
<platform-driver-x86@vger.kernel.org>
Subject: Re: [PATCH v4 1/3] dell-led: Change dell-led.h to dell-common.h
Date: Tue, 24 Apr 2018 18:26:42 +0200 [thread overview]
Message-ID: <s5hbme8lge5.wl-tiwai@suse.de> (raw)
In-Reply-To: <20180420094432.13133-1-kai.heng.feng@canonical.com>
On Fri, 20 Apr 2018 11:44:30 +0200,
Kai-Heng Feng wrote:
>
> This header will be used for more than just led. Change it to a more
> generic name.
>
> Cc: Mario Limonciello <mario.limonciello@dell.com>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
BTW, wouldn't it be better postpone the rename?
Renaming a file in a cross-tree patchset makes harder to apply in
general.
thanks,
Takashi
> ---
> v4: Change the commit message to clarify there's no more runtime pm
> warning.
> Also skip the check for thunderbolt attached devices.
>
> v3: Simplify dell_switchable_gfx_is_enabled() by returning bool instead
> of error code.
> Use DMI_DEV_TYPE_OEM_STRING to match Dell System.
>
> v2: Mario suggested to squash the HDA part into the same series.
>
> drivers/platform/x86/dell-laptop.c | 2 +-
> include/linux/{dell-led.h => dell-common.h} | 4 ++--
> sound/pci/hda/dell_wmi_helper.c | 2 +-
> 3 files changed, 4 insertions(+), 4 deletions(-)
> rename include/linux/{dell-led.h => dell-common.h} (61%)
>
> diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
> index c52c6723374b..8ba820e6c3d0 100644
> --- a/drivers/platform/x86/dell-laptop.c
> +++ b/drivers/platform/x86/dell-laptop.c
> @@ -29,7 +29,7 @@
> #include <linux/mm.h>
> #include <linux/i8042.h>
> #include <linux/debugfs.h>
> -#include <linux/dell-led.h>
> +#include <linux/dell-common.h>
> #include <linux/seq_file.h>
> #include <acpi/video.h>
> #include "dell-rbtn.h"
> diff --git a/include/linux/dell-led.h b/include/linux/dell-common.h
> similarity index 61%
> rename from include/linux/dell-led.h
> rename to include/linux/dell-common.h
> index 92521471517f..37e4b614dd74 100644
> --- a/include/linux/dell-led.h
> +++ b/include/linux/dell-common.h
> @@ -1,6 +1,6 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -#ifndef __DELL_LED_H__
> -#define __DELL_LED_H__
> +#ifndef __DELL_COMMON_H__
> +#define __DELL_COMMON_H__
>
> int dell_micmute_led_set(int on);
>
> diff --git a/sound/pci/hda/dell_wmi_helper.c b/sound/pci/hda/dell_wmi_helper.c
> index 1b48a8c19d28..56050cc3c0ee 100644
> --- a/sound/pci/hda/dell_wmi_helper.c
> +++ b/sound/pci/hda/dell_wmi_helper.c
> @@ -4,7 +4,7 @@
> */
>
> #if IS_ENABLED(CONFIG_DELL_LAPTOP)
> -#include <linux/dell-led.h>
> +#include <linux/dell-common.h>
>
> enum {
> MICMUTE_LED_ON,
> --
> 2.17.0
>
>
next prev parent reply other threads:[~2018-04-24 16:26 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-20 9:44 [PATCH v4 1/3] dell-led: Change dell-led.h to dell-common.h Kai-Heng Feng
2018-04-20 9:44 ` [PATCH v4 2/3] platform/x86: dell-*: Add interface for switchable graphics status query Kai-Heng Feng
2018-04-23 13:43 ` Andy Shevchenko
2018-04-20 9:44 ` [PATCH v4 3/3] ALSA: hda: Disabled unused audio controller for Dell platforms with Switchable Graphics Kai-Heng Feng
2018-04-20 12:10 ` [alsa-devel] " Takashi Iwai
2018-04-23 8:04 ` Kai Heng Feng
2018-04-23 8:08 ` Pali Rohár
2018-04-23 8:18 ` Kai Heng Feng
2018-04-23 8:29 ` Pali Rohár
2018-04-24 21:13 ` Lukas Wunner
2018-04-26 7:52 ` Kai Heng Feng
2018-05-02 7:44 ` Lukas Wunner
2018-04-23 13:52 ` Andy Shevchenko
2018-04-24 16:26 ` Takashi Iwai [this message]
2018-04-26 7:25 ` [PATCH v4 1/3] dell-led: Change dell-led.h to dell-common.h Kai Heng Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hbme8lge5.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=andy@infradead.org \
--cc=dvhart@infradead.org \
--cc=kai.heng.feng@canonical.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mario.limonciello@dell.com \
--cc=mjg59@srcf.ucam.org \
--cc=pali.rohar@gmail.com \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox