From: Takashi Iwai <tiwai@suse.de>
To: "Jan-Simon Möller" <dl9pf@gmx.de>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
alsa-devel@alsa-project.org
Subject: Re: [alsa-devel] hda-intel: no soundcard with current linus' git tree
Date: Thu, 18 Oct 2007 10:11:43 +0200 [thread overview]
Message-ID: <s5hhcko2668.wl%tiwai@suse.de> (raw)
In-Reply-To: <200710181049.48896.dl9pf@gmx.de>
At Thu, 18 Oct 2007 10:49:48 +0200,
Jan-Simon Möller wrote:
>
> I've also no sound. Had it working using the alsa.git tree _before_ the last
> merge (>48h). Needed to use model=asus for this fujitsu v5505 here.
Well, it's not called as "working". You did some workaround
explicitly...
> Now it doesn't work, even with other model-options (fujitsu, laptop).
There is no recent change regarding Conexant codecs over months in
ALSA tree. So, the problem has to be there for long time.
I guess you didn't take ALSA codes from alsa.git properly? alsa.git
master is as same as Linus tree. The latest ALSA code is hold in mm
branch.
thanks,
Takashi
> legolas:/proc/asound # cat cards
> 0 [Intel ]: HDA-Intel - HDA Intel
> HDA Intel at 0xfc400000 irq 22
> legolas:/proc/asound # cat pcm
> 00-01: Conexant Digital : Conexant Digital : playback 1
> 00-00: CONEXANT Analog : CONEXANT Analog : playback 1 : capture 1
> legolas:/proc/asound # cat hwdep
> 00-00: HDA Codec 0
> legolas:/proc/asound # cat devices
> 2: : timer
> 3: [ 0- 1]: digital audio playback
> 4: [ 0- 0]: digital audio playback
> 5: [ 0- 0]: digital audio capture
> 6: [ 0- 0]: hardware dependent
> 7: [ 0] : control
> 8: : sequencer
>
> legolas:/proc/asound # cat card0/codec#0
> Codec: Conexant CX20549 (Venice)
> Address: 0
> Vendor Id: 0x14f15045
> Subsystem Id: 0x1734110e
> Revision Id: 0x100100
> No Modem Function Group found
> Default PCM:
> rates [0x140]: 48000 96000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Default Amp-In caps: N/A
> Default Amp-Out caps: N/A
> Node 0x10 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
> Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1
> Amp-Out vals: [0x2b 0x2b]
> Pincap 0x0810014: OUT EAPD Detect
> Pin Default 0x92170110: [Fixed] Speaker at Int Front
> Conn = Analog, Color = Unknown
> Pin-ctls: 0x40: OUT
> Power: 0x0
> Connection: 2
> 0x19 0x17*
> Node 0x11 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
> Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1
> Amp-Out vals: [0x2b 0x2b]
> Pincap 0x08113c: IN OUT HP Detect
> Pin Default 0x0121401f: [Jack] HP Out at Ext Rear
> Conn = 1/8, Color = Green
> Pin-ctls: 0xc0: OUT HP
> Power: 0x0
> Connection: 2
> 0x19 0x17*
> Node 0x12 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
> Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1
> Amp-Out vals: [0x2b 0x2b]
> Pincap 0x08113c: IN OUT HP Detect
> Pin Default 0x01a19020: [Jack] Mic at Ext Rear
> Conn = 1/8, Color = Pink
> Pin-ctls: 0x20: IN
> Power: 0x0
> Connection: 2
> 0x19 0x17*
> Node 0x13 [Pin Complex] wcaps 0x400301: Stereo Digital
> Pincap 0x0810: OUT
> Pin Default 0x214571f0: [Jack] SPDIF Out at Sep Rear
> Conn = Optical, Color = Yellow
> Pin-ctls: 0x00:
> Connection: 1
> 0x18
> Node 0x14 [Pin Complex] wcaps 0x400081: Stereo
> Pincap 0x081124: IN Detect
> Pin Default 0x97a7012e: [Fixed] Mic at Int Riser
> Conn = Analog, Color = Unknown
> Pin-ctls: 0x24: IN
> Node 0x15 [Pin Complex] wcaps 0x400001: Stereo
> Pincap 0x0820: IN
> Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
> Conn = Unknown, Color = Unknown
> Pin-ctls: 0x00:
> Node 0x16 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
> Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0b, mute=1
> Amp-Out vals: [0x06]
> Node 0x17 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
> Amp-In caps: ofs=0x14, nsteps=0x2b, stepsize=0x05, mute=1
> Amp-In vals: [0x94 0x94] [0x94 0x94] [0x94 0x94] [0x94 0x94] [0x94 0x94]
> Power: 0x0
> Connection: 5
> 0x19 0x14 0x12 0x11 0x15
> Node 0x18 [Audio Output] wcaps 0x211: Stereo Digital
> PCM:
> rates [0x40]: 48000
> bits [0x6]: 16 20
> formats [0x5]: PCM AC3
> Node 0x19 [Audio Output] wcaps 0xc11: Stereo
> PCM:
> rates [0x540]: 48000 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Power: 0x0
> Node 0x1a [Audio Input] wcaps 0x100d0b: Stereo Amp-In
> Amp-In caps: ofs=0x00, nsteps=0x17, stepsize=0x05, mute=1
> Amp-In vals: [0x17 0x17] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
> Power: 0x0
> Connection: 5
> 0x17 0x14* 0x12 0x11 0x15
> Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono
>
> Best regards
> Jan-Simon
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
next prev parent reply other threads:[~2007-10-18 8:58 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-16 22:18 hda-intel: no soundcard with current linus' git tree Thomas Meyer
2007-10-17 2:47 ` Maxim Levitsky
2007-10-17 8:42 ` Takashi Iwai
2007-10-17 18:17 ` Thomas Meyer
2007-10-18 1:51 ` Maxim Levitsky
2007-10-18 1:53 ` Maxim Levitsky
2007-10-18 5:57 ` Takashi Iwai
2007-10-18 14:21 ` Maxim Levitsky
2007-10-18 13:49 ` Takashi Iwai
2007-10-18 15:24 ` Maxim Levitsky
2007-10-18 14:47 ` Takashi Iwai
2007-10-21 15:42 ` Thomas Meyer
2007-10-18 2:35 ` Jeff Garzik
2007-10-18 3:36 ` Maxim Levitsky
2007-10-18 3:38 ` Jeff Garzik
2007-10-18 4:10 ` Maxim Levitsky
2007-10-18 4:24 ` Jeff Garzik
2007-10-18 6:02 ` Takashi Iwai
2007-10-18 8:49 ` Jan-Simon Möller
2007-10-18 8:11 ` Takashi Iwai [this message]
2007-10-18 11:50 ` [alsa-devel] " Jan-Simon Möller
2007-10-18 15:05 ` Jan-Simon Möller
2007-10-18 14:39 ` Takashi Iwai
2007-10-18 16:19 ` Jan-Simon Möller
2007-10-19 5:05 ` Takashi Iwai
2007-10-19 10:46 ` Jan-Simon Möller
2007-10-19 10:02 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hhcko2668.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=dl9pf@gmx.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox