From: Takashi Iwai <tiwai@suse.de>
To: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: tiwai@suse.com, "Jaroslav Kysela" <perex@perex.cz>,
"Michał Mirosław" <mirq-linux@rere.qmqm.pl>,
"Wenwen Wang" <wenwen@cs.uga.edu>,
"Hui Wang" <hui.wang@canonical.com>,
"Pierre-Louis Bossart" <pierre-louis.bossart@linux.intel.com>,
"Kailang Yang" <kailang@realtek.com>,
"Jian-Hong Pan" <jian-hong@endlessm.com>,
"Tomas Espeleta" <tomas.espeleta@gmail.com>,
"Thomas Hebb" <tommyhebb@gmail.com>,
alsa-devel@alsa-project.org (moderated list:SOUND),
linux-kernel@vger.kernel.org (open list)
Subject: Re: [PATCH 1/2] ALSA: hda: Make codec controlled LED support more generic
Date: Tue, 16 Jun 2020 10:01:52 +0200 [thread overview]
Message-ID: <s5himfr30cv.wl-tiwai@suse.de> (raw)
In-Reply-To: <20200616044702.17570-1-kai.heng.feng@canonical.com>
On Tue, 16 Jun 2020 06:46:58 +0200,
Kai-Heng Feng wrote:
>
> Currently, only HDA codec GPIO controlled LED class is supported, and
> only via platform specific quirk.
>
> There are systems that control LED via COEF instead of GPIO, and to
> support those systems, move the LED class registration to
> snd_hda_gen_add_micmute_led(), so all systems can facilitate the same
> interface.
This will result in creating the led cdev always when the mic-mute LED
feature is used, not only for HP but also for Dell and Huawei.
Is this the intended result?
thanks,
Takashi
>
> In addition to that, add LED_CORE_SUSPENDRESUME flag since some systems
> don't restore the LED properly after suspend.
>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> ---
> sound/pci/hda/hda_generic.c | 28 ++++++++++++++++++++++++++++
> sound/pci/hda/patch_realtek.c | 30 ------------------------------
> 2 files changed, 28 insertions(+), 30 deletions(-)
>
> diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
> index f4e9d9445e18..4242407734c0 100644
> --- a/sound/pci/hda/hda_generic.c
> +++ b/sound/pci/hda/hda_generic.c
> @@ -4006,6 +4006,28 @@ static const struct snd_kcontrol_new micmute_led_mode_ctl = {
> *
> * Returns 0 if the hook is established or a negative error code.
> */
> +
> +#if IS_REACHABLE(CONFIG_LEDS_TRIGGER_AUDIO)
> +static int micmute_led_set(struct led_classdev *led_cdev,
> + enum led_brightness brightness)
> +{
> + struct hda_codec *codec = dev_to_hda_codec(led_cdev->dev->parent);
> + struct hda_gen_spec *spec = codec->spec;
> +
> + spec->micmute_led.led_mode = !brightness;
> + call_micmute_led_update(codec);
> + return 0;
> +}
> +
> +static struct led_classdev micmute_led_cdev = {
> + .name = "hda::micmute",
> + .max_brightness = 1,
> + .brightness_set_blocking = micmute_led_set,
> + .default_trigger = "audio-micmute",
> + .flags = LED_CORE_SUSPENDRESUME,
> +};
> +#endif
> +
> int snd_hda_gen_add_micmute_led(struct hda_codec *codec,
> void (*hook)(struct hda_codec *))
> {
> @@ -4019,6 +4041,12 @@ int snd_hda_gen_add_micmute_led(struct hda_codec *codec,
> spec->cap_sync_hook = update_micmute_led;
> if (!snd_hda_gen_add_kctl(spec, NULL, &micmute_led_mode_ctl))
> return -ENOMEM;
> +
> +#if IS_REACHABLE(CONFIG_LEDS_TRIGGER_AUDIO)
> + micmute_led_cdev.brightness = ledtrig_audio_get(LED_AUDIO_MICMUTE);
> + if (devm_led_classdev_register(&codec->core.dev, &micmute_led_cdev))
> + codec_warn(codec, "failed to register micmute LED\n");
> +#endif
> return 0;
> }
> EXPORT_SYMBOL_GPL(snd_hda_gen_add_micmute_led);
> diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
> index 6d73f8beadb6..cead44a6c6cd 100644
> --- a/sound/pci/hda/patch_realtek.c
> +++ b/sound/pci/hda/patch_realtek.c
> @@ -4109,26 +4109,6 @@ static void alc_gpio_micmute_update(struct hda_codec *codec)
> spec->gen.micmute_led.led_value);
> }
>
> -#if IS_REACHABLE(CONFIG_LEDS_TRIGGER_AUDIO)
> -static int micmute_led_set(struct led_classdev *led_cdev,
> - enum led_brightness brightness)
> -{
> - struct hda_codec *codec = dev_to_hda_codec(led_cdev->dev->parent);
> - struct alc_spec *spec = codec->spec;
> -
> - alc_update_gpio_led(codec, spec->gpio_mic_led_mask,
> - spec->micmute_led_polarity, !!brightness);
> - return 0;
> -}
> -
> -static struct led_classdev micmute_led_cdev = {
> - .name = "hda::micmute",
> - .max_brightness = 1,
> - .brightness_set_blocking = micmute_led_set,
> - .default_trigger = "audio-micmute",
> -};
> -#endif
> -
> /* setup mute and mic-mute GPIO bits, add hooks appropriately */
> static void alc_fixup_hp_gpio_led(struct hda_codec *codec,
> int action,
> @@ -4136,9 +4116,6 @@ static void alc_fixup_hp_gpio_led(struct hda_codec *codec,
> unsigned int micmute_mask)
> {
> struct alc_spec *spec = codec->spec;
> -#if IS_REACHABLE(CONFIG_LEDS_TRIGGER_AUDIO)
> - int err;
> -#endif
>
> alc_fixup_gpio(codec, action, mute_mask | micmute_mask);
>
> @@ -4151,13 +4128,6 @@ static void alc_fixup_hp_gpio_led(struct hda_codec *codec,
> if (micmute_mask) {
> spec->gpio_mic_led_mask = micmute_mask;
> snd_hda_gen_add_micmute_led(codec, alc_gpio_micmute_update);
> -
> -#if IS_REACHABLE(CONFIG_LEDS_TRIGGER_AUDIO)
> - micmute_led_cdev.brightness = ledtrig_audio_get(LED_AUDIO_MICMUTE);
> - err = devm_led_classdev_register(&codec->core.dev, &micmute_led_cdev);
> - if (err)
> - codec_warn(codec, "failed to register micmute LED\n");
> -#endif
> }
> }
>
> --
> 2.17.1
>
next prev parent reply other threads:[~2020-06-16 8:01 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-16 4:46 [PATCH 1/2] ALSA: hda: Make codec controlled LED support more generic Kai-Heng Feng
2020-06-16 4:46 ` [PATCH 2/2] ALSA: hda/realtek: Add mute LED and micmute LED support for HP systems Kai-Heng Feng
2020-06-16 8:01 ` Takashi Iwai [this message]
2020-06-16 8:36 ` [PATCH 1/2] ALSA: hda: Make codec controlled LED support more generic Kai-Heng Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5himfr30cv.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=hui.wang@canonical.com \
--cc=jian-hong@endlessm.com \
--cc=kai.heng.feng@canonical.com \
--cc=kailang@realtek.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mirq-linux@rere.qmqm.pl \
--cc=perex@perex.cz \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=tiwai@suse.com \
--cc=tomas.espeleta@gmail.com \
--cc=tommyhebb@gmail.com \
--cc=wenwen@cs.uga.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox