From: "Nicholas Berry" <nikberry@med.umich.edu>
To: <kschad@correo.e-technik.uni-ulm.de>, "<"<linux-kernel@vger.kernel.org>
Subject: Re: Kernel 2.4.17 with VT8367 [KT266] crashes on heavy ide load togeter with heavy network load
Date: Tue, 26 Mar 2002 08:15:11 -0500 [thread overview]
Message-ID: <sca02e2c.038@mail-01.med.umich.edu> (raw)
I've got one system roughly similar to yours, RAID 5 , but scsi, not ata.
The CPU is also a 1400MHz Athlon.
My lspci:
00:00.0 Host bridge: VIA Technologies, Inc. VT8367 [KT266]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8367 [KT266 AGP]
00:09.0 Ethernet controller: Lite-On Communications Inc LNE100TX [Linksys EtherFast 10/100] (rev 25)
00:0a.0 SCSI storage controller: Adaptec 7899A (rev 01)
00:0a.1 SCSI storage controller: Adaptec 7899A (rev 01)
00:0b.0 SCSI storage controller: Adaptec AIC-7881U
00:0c.0 Ethernet controller: Bridgecom, Inc: Unknown device 0985 (rev 11)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
00:11.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18)
00:11.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18)
00:11.4 USB Controller: VIA Technologies, Inc. UHCI USB (rev 18)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller (rev 10)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF
It would hang exactly as you described. It's a test system, and things change so fast I never got around to tracking the problem down. However, it's now running 2.4.19-pre4 and hasn't hung for days (since 2.4.19-pre4 was installed).
Nik
>>> Kai-Boris Schad <kschad@correo.e-technik.uni-ulm.de> 03/26/02 06:27AM >>>
> Hi !
> I have problems with PC mainboard using the Via VT8367 [KT266] chipset.
> lspci shows the configuration:
> lspci
> 00:00.0 Host bridge: VIA Technologies, Inc. VT8367 [KT266]
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8367 [KT266 AGP]
> 00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
> 00:0e.0 Unknown mass storage controller: Promise Technology, Inc. 20268 (rev
> 01)00:0f.0 Unknown mass storage controller: Promise Technology, Inc. 20268
> (rev 01)00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
> 00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
> 01:00.0 VGA compatible controller: ATI Technologies Inc Rage XL AGP (rev 27)
>
>The CPU is a 1400MHz Athlon.
> We use this system for a software Raid 5. If we produce heavy load on the
> disks and network the system hangs. There is no log of errors at all. We
> tried to change the network card form a 3com to a rtl83xx. The system remains
> a litle longer stable but crashes then too. We also tried to have the
> harddisks on seperate ide channels but this didn't solve the crashs.
> It seems to be something with the dma, because if we disable the dma of the
> harddisks the system is stable. Does anybody also recognise this problem ?
> Is there any solution for this effect ?
>
> Thanks a lot
>
> Kai
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
next reply other threads:[~2002-03-26 13:16 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-03-26 13:15 Nicholas Berry [this message]
-- strict thread matches above, loose matches on Subject: below --
2002-03-29 22:18 Kernel 2.4.17 with VT8367 [KT266] crashes on heavy ide load togeter with heavy network load David Härdeman
2002-03-26 11:27 Kai-Boris Schad
2002-03-26 13:44 ` Alan Cox
2002-03-26 15:57 ` Mark Cooke
2002-03-26 20:31 ` Andre Hedrick
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sca02e2c.038@mail-01.med.umich.edu \
--to=nikberry@med.umich.edu \
--cc=kschad@correo.e-technik.uni-ulm.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox