From: Gerd Knorr <kraxel@bytesex.org>
To: linux-kernel@vger.kernel.org
Subject: Re: Linux 2.4.19-pre3
Date: 12 Mar 2002 10:35:35 GMT [thread overview]
Message-ID: <slrna8rmfn.46r.kraxel@bytesex.org> (raw)
In-Reply-To: <Pine.LNX.4.21.0203111805480.2492-100000@freak.distro.conectiva>
> Here goes -pre3, with the new IDE code. It has been stable enough time in
> the -ac tree, in my and Alan's opinion.
Doesn't boot my machine. "Intel machine check architecture supported"
is the last message printed before it just hangs.
Gerd
==============================[ cut here ]==============================
Linux version 2.4.19-pre3 (root@bogomips) (gcc version 2.95.3 20010315 (SuSE)) #2 Tue Mar 12 10:53:06 CET 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)
BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
On node 0 totalpages: 262140
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 32764 pages.
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Kernel command line: auto BOOT_IMAGE=2.4.19-pre3 ro root=306 console=ttyS0,115200n8 console=tty0
Initializing CPU#0
Detected 451.028 MHz processor.
Console: colour VGA+ 80x60
Calibrating delay loop... 897.84 BogoMIPS
Memory: 1033576k/1048560k available (784k kernel code, 14596k reserved, 275k data, 220k init, 131056k highmem)
Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
next prev parent reply other threads:[~2002-03-12 10:55 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-03-11 21:08 Linux 2.4.19-pre3 Marcelo Tosatti
2002-03-11 22:40 ` Eyal Lebedinsky
2002-03-11 23:03 ` Alan Cox
2002-03-11 22:55 ` Stephan von Krawczynski
2002-03-12 1:50 ` Mike Fedyk
2002-03-12 11:06 ` Stephan von Krawczynski
2002-03-12 21:59 ` Paul Mackerras
2002-03-11 23:04 ` Eyal Lebedinsky
2002-03-11 23:14 ` Keith Owens
2002-03-12 15:49 ` DevilKin
2002-03-21 12:06 ` [patch] Don't offer CONFIG_INDYDOG on non-ip22 machines Adrian Bunk
2002-03-22 21:13 ` Marcelo Tosatti
2002-03-11 23:21 ` Linux 2.4.19-pre3 Eyal Lebedinsky
2002-03-12 1:40 ` Takeo Saito
2002-03-12 0:04 ` J.A. Magallon
2002-03-12 0:37 ` Ken Brownfield
2002-03-19 2:41 ` I/O APIC fixed in 2.4.19-pre3 & 2.5.6 (was Re: Linux 2.4.19-pre3) Ken Brownfield
2002-03-19 16:22 ` Bill Davidsen
2002-03-20 0:34 ` Ken Brownfield
2002-03-20 4:36 ` Bill Davidsen
2002-03-12 10:35 ` Gerd Knorr [this message]
2002-03-12 17:24 ` Linux 2.4.19-pre3 Trond Myklebust
2002-03-12 17:47 ` Gerd Knorr
2002-03-12 13:01 ` Karsten Weiss
2002-03-12 13:17 ` Jens Axboe
2002-03-12 13:37 ` Alan Cox
2002-03-12 13:46 ` Jens Axboe
2002-03-12 19:02 ` Marcelo Tosatti
2002-03-13 8:09 ` Jens Axboe
2002-03-13 9:00 ` Andre Hedrick
2002-03-13 9:27 ` Jens Axboe
2002-03-13 9:33 ` Andre Hedrick
2002-03-13 17:32 ` Andre Hedrick
2002-03-13 17:40 ` Jens Axboe
2002-03-13 18:52 ` Andre Hedrick
2002-03-14 4:41 ` Marcelo Tosatti
2002-03-14 6:28 ` Andre Hedrick
2002-03-14 3:32 ` Michal Jaegermann
2002-03-12 14:47 ` J.A. Magallon
2002-03-12 13:31 ` Jurgen Philippaerts
2002-03-12 15:43 ` Geert Uytterhoeven
-- strict thread matches above, loose matches on Subject: below --
2002-03-12 0:51 Mikael Pettersson
2002-03-12 5:13 ` skidley
2002-03-12 21:00 ` Dave Jones
[not found] <fa.npg7nmv.si46bq@ifi.uio.no>
2002-03-12 7:26 ` junkio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=slrna8rmfn.46r.kraxel@bytesex.org \
--to=kraxel@bytesex.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox