From: tip-bot for Andi Kleen <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: noodles@earth.li, tglx@linutronix.de,
linux-kernel@vger.kernel.org, ak@linux.intel.com,
torvalds@linux-foundation.org, hpa@zytor.com,
peterz@infradead.org, mingo@kernel.org
Subject: [tip:x86/fpu] x86/cpuid: Add generic table for CPUID dependencies
Date: Tue, 17 Oct 2017 09:22:25 -0700 [thread overview]
Message-ID: <tip-0b00de857a648dafe7020878c7a27cf776f5edf4@git.kernel.org> (raw)
In-Reply-To: <20171013215645.23166-3-andi@firstfloor.org>
Commit-ID: 0b00de857a648dafe7020878c7a27cf776f5edf4
Gitweb: https://git.kernel.org/tip/0b00de857a648dafe7020878c7a27cf776f5edf4
Author: Andi Kleen <ak@linux.intel.com>
AuthorDate: Fri, 13 Oct 2017 14:56:42 -0700
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Tue, 17 Oct 2017 17:14:57 +0200
x86/cpuid: Add generic table for CPUID dependencies
Some CPUID features depend on other features. Currently it's
possible to to clear dependent features, but not clear the base features,
which can cause various interesting problems.
This patch implements a generic table to describe dependencies
between CPUID features, to be used by all code that clears
CPUID.
Some subsystems (like XSAVE) had an own implementation of this,
but it's better to do it all in a single place for everyone.
Then clear_cpu_cap and setup_clear_cpu_cap always look up
this table and clear all dependencies too.
This is intended to be a practical table: only for features
that make sense to clear. If someone for example clears FPU,
or other features that are essentially part of the required
base feature set, not much is going to work. Handling
that is right now out of scope. We're only handling
features which can be usefully cleared.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jonathan McDowell <noodles@earth.li>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171013215645.23166-3-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
arch/x86/include/asm/cpufeature.h | 9 ++-
arch/x86/include/asm/cpufeatures.h | 5 ++
arch/x86/kernel/cpu/Makefile | 1 +
arch/x86/kernel/cpu/cpuid-deps.c | 113 +++++++++++++++++++++++++++++++++++++
4 files changed, 123 insertions(+), 5 deletions(-)
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index d59c15c..225fd83 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -125,11 +125,10 @@ extern const char * const x86_bug_flags[NBUGINTS*32];
#define boot_cpu_has(bit) cpu_has(&boot_cpu_data, bit)
#define set_cpu_cap(c, bit) set_bit(bit, (unsigned long *)((c)->x86_capability))
-#define clear_cpu_cap(c, bit) clear_bit(bit, (unsigned long *)((c)->x86_capability))
-#define setup_clear_cpu_cap(bit) do { \
- clear_cpu_cap(&boot_cpu_data, bit); \
- set_bit(bit, (unsigned long *)cpu_caps_cleared); \
-} while (0)
+
+extern void setup_clear_cpu_cap(unsigned int bit);
+extern void clear_cpu_cap(struct cpuinfo_x86 *c, unsigned int bit);
+
#define setup_force_cpu_cap(bit) do { \
set_cpu_cap(&boot_cpu_data, bit); \
set_bit(bit, (unsigned long *)cpu_caps_set); \
diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h
index 2519c6c..401a709 100644
--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -21,6 +21,11 @@
* this feature bit is not displayed in /proc/cpuinfo at all.
*/
+/*
+ * When adding new features here that depend on other features,
+ * please update the table in kernel/cpu/cpuid-deps.c
+ */
+
/* Intel-defined CPU features, CPUID level 0x00000001 (edx), word 0 */
#define X86_FEATURE_FPU ( 0*32+ 0) /* Onboard FPU */
#define X86_FEATURE_VME ( 0*32+ 1) /* Virtual Mode Extensions */
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index e17942c..de260fa 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -22,6 +22,7 @@ obj-y += rdrand.o
obj-y += match.o
obj-y += bugs.o
obj-$(CONFIG_CPU_FREQ) += aperfmperf.o
+obj-y += cpuid-deps.o
obj-$(CONFIG_PROC_FS) += proc.o
obj-$(CONFIG_X86_FEATURE_NAMES) += capflags.o powerflags.o
diff --git a/arch/x86/kernel/cpu/cpuid-deps.c b/arch/x86/kernel/cpu/cpuid-deps.c
new file mode 100644
index 0000000..e48eb73
--- /dev/null
+++ b/arch/x86/kernel/cpu/cpuid-deps.c
@@ -0,0 +1,113 @@
+/* Declare dependencies between CPUIDs */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <asm/cpufeature.h>
+
+struct cpuid_dep {
+ unsigned int feature;
+ unsigned int depends;
+};
+
+/*
+ * Table of CPUID features that depend on others.
+ *
+ * This only includes dependencies that can be usefully disabled, not
+ * features part of the base set (like FPU).
+ *
+ * Note this all is not __init / __initdata because it can be
+ * called from cpu hotplug. It shouldn't do anything in this case,
+ * but it's difficult to tell that to the init reference checker.
+ */
+const static struct cpuid_dep cpuid_deps[] = {
+ { X86_FEATURE_XSAVEOPT, X86_FEATURE_XSAVE },
+ { X86_FEATURE_XSAVEC, X86_FEATURE_XSAVE },
+ { X86_FEATURE_XSAVES, X86_FEATURE_XSAVE },
+ { X86_FEATURE_AVX, X86_FEATURE_XSAVE },
+ { X86_FEATURE_PKU, X86_FEATURE_XSAVE },
+ { X86_FEATURE_MPX, X86_FEATURE_XSAVE },
+ { X86_FEATURE_XGETBV1, X86_FEATURE_XSAVE },
+ { X86_FEATURE_FXSR_OPT, X86_FEATURE_FXSR },
+ { X86_FEATURE_XMM, X86_FEATURE_FXSR },
+ { X86_FEATURE_XMM2, X86_FEATURE_XMM },
+ { X86_FEATURE_XMM3, X86_FEATURE_XMM2 },
+ { X86_FEATURE_XMM4_1, X86_FEATURE_XMM2 },
+ { X86_FEATURE_XMM4_2, X86_FEATURE_XMM2 },
+ { X86_FEATURE_XMM3, X86_FEATURE_XMM2 },
+ { X86_FEATURE_PCLMULQDQ, X86_FEATURE_XMM2 },
+ { X86_FEATURE_SSSE3, X86_FEATURE_XMM2, },
+ { X86_FEATURE_F16C, X86_FEATURE_XMM2, },
+ { X86_FEATURE_AES, X86_FEATURE_XMM2 },
+ { X86_FEATURE_SHA_NI, X86_FEATURE_XMM2 },
+ { X86_FEATURE_FMA, X86_FEATURE_AVX },
+ { X86_FEATURE_AVX2, X86_FEATURE_AVX, },
+ { X86_FEATURE_AVX512F, X86_FEATURE_AVX, },
+ { X86_FEATURE_AVX512IFMA, X86_FEATURE_AVX512F },
+ { X86_FEATURE_AVX512PF, X86_FEATURE_AVX512F },
+ { X86_FEATURE_AVX512ER, X86_FEATURE_AVX512F },
+ { X86_FEATURE_AVX512CD, X86_FEATURE_AVX512F },
+ { X86_FEATURE_AVX512DQ, X86_FEATURE_AVX512F },
+ { X86_FEATURE_AVX512BW, X86_FEATURE_AVX512F },
+ { X86_FEATURE_AVX512VL, X86_FEATURE_AVX512F },
+ { X86_FEATURE_AVX512VBMI, X86_FEATURE_AVX512F },
+ { X86_FEATURE_AVX512_4VNNIW, X86_FEATURE_AVX512F },
+ { X86_FEATURE_AVX512_4FMAPS, X86_FEATURE_AVX512F },
+ { X86_FEATURE_AVX512_VPOPCNTDQ, X86_FEATURE_AVX512F },
+ {}
+};
+
+static inline void __clear_cpu_cap(struct cpuinfo_x86 *c, unsigned int bit)
+{
+ clear_bit32(bit, c->x86_capability);
+}
+
+static inline void __setup_clear_cpu_cap(unsigned int bit)
+{
+ clear_cpu_cap(&boot_cpu_data, bit);
+ set_bit32(bit, cpu_caps_cleared);
+}
+
+static inline void clear_feature(struct cpuinfo_x86 *c, unsigned int feature)
+{
+ if (!c)
+ __setup_clear_cpu_cap(feature);
+ else
+ __clear_cpu_cap(c, feature);
+}
+
+static void do_clear_cpu_cap(struct cpuinfo_x86 *c, unsigned int feature)
+{
+ bool changed;
+ DECLARE_BITMAP(disable, NCAPINTS * sizeof(u32) * 8);
+ const struct cpuid_dep *d;
+
+ clear_feature(c, feature);
+
+ /* Collect all features to disable, handling dependencies */
+ memset(disable, 0, sizeof(disable));
+ __set_bit(feature, disable);
+
+ /* Loop until we get a stable state. */
+ do {
+ changed = false;
+ for (d = cpuid_deps; d->feature; d++) {
+ if (!test_bit(d->depends, disable))
+ continue;
+ if (__test_and_set_bit(d->feature, disable))
+ continue;
+
+ changed = true;
+ clear_feature(c, d->feature);
+ }
+ } while (changed);
+}
+
+void clear_cpu_cap(struct cpuinfo_x86 *c, unsigned int feature)
+{
+ do_clear_cpu_cap(c, feature);
+}
+
+void setup_clear_cpu_cap(unsigned int feature)
+{
+ do_clear_cpu_cap(NULL, feature);
+}
next prev parent reply other threads:[~2017-10-17 16:27 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-13 21:56 Support generic disabling of all XSAVE features Andi Kleen
2017-10-13 21:56 ` [PATCH v10 1/5] bitops: Add clear/set_bit32 to linux/bitops.h Andi Kleen
2017-10-17 15:14 ` Thomas Gleixner
2017-10-17 16:21 ` [tip:x86/fpu] bitops: Add clear/set_bit32() " tip-bot for Andi Kleen
2017-11-05 15:53 ` Heiko Carstens
2017-11-05 17:40 ` Ingo Molnar
2017-11-05 18:01 ` Linus Torvalds
2017-10-13 21:56 ` [PATCH v10 2/5] x86/cpuid: Add generic table for cpuid dependencies Andi Kleen
2017-10-17 16:22 ` tip-bot for Andi Kleen [this message]
2017-10-13 21:56 ` [PATCH v10 3/5] x86/fpu: Parse clearcpuid= as early XSAVE argument Andi Kleen
2017-10-17 15:15 ` Thomas Gleixner
2017-10-17 15:19 ` Ingo Molnar
2017-10-17 16:22 ` [tip:x86/fpu] " tip-bot for Andi Kleen
2017-10-13 21:56 ` [PATCH v10 4/5] x86/fpu: Make XSAVE check the base CPUID features before enabling Andi Kleen
2017-10-17 16:23 ` [tip:x86/fpu] " tip-bot for Andi Kleen
2017-10-13 21:56 ` [PATCH v10 5/5] x86/fpu: Remove the explicit clearing of XSAVE dependend features Andi Kleen
2017-10-17 16:23 ` [tip:x86/fpu] x86/fpu: Remove the explicit clearing of XSAVE dependent features tip-bot for Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-0b00de857a648dafe7020878c7a27cf776f5edf4@git.kernel.org \
--to=tipbot@zytor.com \
--cc=ak@linux.intel.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=noodles@earth.li \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox