From: "tip-bot for Kirill A. Shutemov" <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, torvalds@linux-foundation.org,
hpa@zytor.com, peterz@infradead.org,
kirill.shutemov@linux.intel.com, tglx@linutronix.de,
thomas.lendacky@amd.com, mingo@kernel.org, luto@kernel.org,
bp@alien8.de
Subject: [tip:x86/mm] x86/mm/encrypt: Simplify sme_pgtable_calc()
Date: Tue, 13 Feb 2018 07:31:23 -0800 [thread overview]
Message-ID: <tip-1070730c1ad2bd49b0d11112728f1f4390137728@git.kernel.org> (raw)
In-Reply-To: <20180131135404.40692-4-kirill.shutemov@linux.intel.com>
Commit-ID: 1070730c1ad2bd49b0d11112728f1f4390137728
Gitweb: https://git.kernel.org/tip/1070730c1ad2bd49b0d11112728f1f4390137728
Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
AuthorDate: Wed, 31 Jan 2018 16:54:04 +0300
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Tue, 13 Feb 2018 15:59:49 +0100
x86/mm/encrypt: Simplify sme_pgtable_calc()
sme_pgtable_calc() is unnecessary complex. It can be re-written in a
more stream-lined way.
As a side effect, we would get the code ready to boot-time switching
between paging modes.
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180131135404.40692-4-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
arch/x86/mm/mem_encrypt_identity.c | 42 +++++++++++---------------------------
1 file changed, 12 insertions(+), 30 deletions(-)
diff --git a/arch/x86/mm/mem_encrypt_identity.c b/arch/x86/mm/mem_encrypt_identity.c
index 4b6a2e3..b4139c5 100644
--- a/arch/x86/mm/mem_encrypt_identity.c
+++ b/arch/x86/mm/mem_encrypt_identity.c
@@ -231,8 +231,7 @@ static void __init sme_map_range_decrypted_wp(struct sme_populate_pgd_data *ppd)
static unsigned long __init sme_pgtable_calc(unsigned long len)
{
- unsigned long p4d_size, pud_size, pmd_size, pte_size;
- unsigned long total;
+ unsigned long entries = 0, tables = 0;
/*
* Perform a relatively simplistic calculation of the pagetable
@@ -246,42 +245,25 @@ static unsigned long __init sme_pgtable_calc(unsigned long len)
* Incrementing the count for each covers the case where the addresses
* cross entries.
*/
- if (IS_ENABLED(CONFIG_X86_5LEVEL)) {
- p4d_size = (ALIGN(len, PGDIR_SIZE) / PGDIR_SIZE) + 1;
- p4d_size *= sizeof(p4d_t) * PTRS_PER_P4D;
- pud_size = (ALIGN(len, P4D_SIZE) / P4D_SIZE) + 1;
- pud_size *= sizeof(pud_t) * PTRS_PER_PUD;
- } else {
- p4d_size = 0;
- pud_size = (ALIGN(len, PGDIR_SIZE) / PGDIR_SIZE) + 1;
- pud_size *= sizeof(pud_t) * PTRS_PER_PUD;
- }
- pmd_size = (ALIGN(len, PUD_SIZE) / PUD_SIZE) + 1;
- pmd_size *= sizeof(pmd_t) * PTRS_PER_PMD;
- pte_size = 2 * sizeof(pte_t) * PTRS_PER_PTE;
- total = p4d_size + pud_size + pmd_size + pte_size;
+ /* PGDIR_SIZE is equal to P4D_SIZE on 4-level machine. */
+ if (PTRS_PER_P4D > 1)
+ entries += (DIV_ROUND_UP(len, PGDIR_SIZE) + 1) * sizeof(p4d_t) * PTRS_PER_P4D;
+ entries += (DIV_ROUND_UP(len, P4D_SIZE) + 1) * sizeof(pud_t) * PTRS_PER_PUD;
+ entries += (DIV_ROUND_UP(len, PUD_SIZE) + 1) * sizeof(pmd_t) * PTRS_PER_PMD;
+ entries += 2 * sizeof(pte_t) * PTRS_PER_PTE;
/*
* Now calculate the added pagetable structures needed to populate
* the new pagetables.
*/
- if (IS_ENABLED(CONFIG_X86_5LEVEL)) {
- p4d_size = ALIGN(total, PGDIR_SIZE) / PGDIR_SIZE;
- p4d_size *= sizeof(p4d_t) * PTRS_PER_P4D;
- pud_size = ALIGN(total, P4D_SIZE) / P4D_SIZE;
- pud_size *= sizeof(pud_t) * PTRS_PER_PUD;
- } else {
- p4d_size = 0;
- pud_size = ALIGN(total, PGDIR_SIZE) / PGDIR_SIZE;
- pud_size *= sizeof(pud_t) * PTRS_PER_PUD;
- }
- pmd_size = ALIGN(total, PUD_SIZE) / PUD_SIZE;
- pmd_size *= sizeof(pmd_t) * PTRS_PER_PMD;
- total += p4d_size + pud_size + pmd_size;
+ if (PTRS_PER_P4D > 1)
+ tables += DIV_ROUND_UP(entries, PGDIR_SIZE) * sizeof(p4d_t) * PTRS_PER_P4D;
+ tables += DIV_ROUND_UP(entries, P4D_SIZE) * sizeof(pud_t) * PTRS_PER_PUD;
+ tables += DIV_ROUND_UP(entries, PUD_SIZE) * sizeof(pmd_t) * PTRS_PER_PMD;
- return total;
+ return entries + tables;
}
void __init __nostackprotector sme_encrypt_kernel(struct boot_params *bp)
prev parent reply other threads:[~2018-02-13 15:43 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-31 13:54 [PATCHv4 0/3] x86/mm/encrypt: Cleanup and switching between paging modes<Paste> Kirill A. Shutemov
2018-01-31 13:54 ` [PATCHv4 1/3] x86/mm/encrypt: Move page table helpers into separate translation unit Kirill A. Shutemov
2018-02-13 15:30 ` [tip:x86/mm] " tip-bot for Kirill A. Shutemov
2018-01-31 13:54 ` [PATCHv4 2/3] x86/mm/encrypt: Rewrite sme_populate_pgd() and sme_populate_pgd_large() Kirill A. Shutemov
2018-02-13 15:30 ` [tip:x86/mm] x86/mm/encrypt: Simplify " tip-bot for Kirill A. Shutemov
2018-01-31 13:54 ` [PATCHv4 3/3] x86/mm/encrypt: Rewrite sme_pgtable_calc() Kirill A. Shutemov
2018-02-13 15:31 ` tip-bot for Kirill A. Shutemov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-1070730c1ad2bd49b0d11112728f1f4390137728@git.kernel.org \
--to=tipbot@zytor.com \
--cc=bp@alien8.de \
--cc=hpa@zytor.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=luto@kernel.org \
--cc=mingo@kernel.org \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
--cc=thomas.lendacky@amd.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox