From: tip-bot for Peter Zijlstra <a.p.zijlstra@chello.nl>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@redhat.com,
a.p.zijlstra@chello.nl, tglx@linutronix.de, mingo@elte.hu
Subject: [tip:sched/core] sched: Move load balance code into sched_fair.c
Date: Thu, 21 Jan 2010 13:52:08 GMT [thread overview]
Message-ID: <tip-1e3c88bdeb1260edc341e45c9fb8efd182a5c511@git.kernel.org> (raw)
In-Reply-To: <new-submission>
Commit-ID: 1e3c88bdeb1260edc341e45c9fb8efd182a5c511
Gitweb: http://git.kernel.org/tip/1e3c88bdeb1260edc341e45c9fb8efd182a5c511
Author: Peter Zijlstra <a.p.zijlstra@chello.nl>
AuthorDate: Thu, 17 Dec 2009 17:00:43 +0100
Committer: Ingo Molnar <mingo@elte.hu>
CommitDate: Thu, 21 Jan 2010 13:40:08 +0100
sched: Move load balance code into sched_fair.c
Straight fwd code movement.
Since non of the load-balance abstractions are used anymore, do away with
them and simplify the code some. In preparation move the code around.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
kernel/sched.c | 1919 +++------------------------------------------------
kernel/sched_fair.c | 1765 ++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 1844 insertions(+), 1840 deletions(-)
diff --git a/kernel/sched.c b/kernel/sched.c
index 64298a5..13a2acf 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -1805,6 +1805,51 @@ static inline void double_unlock_balance(struct rq *this_rq, struct rq *busiest)
raw_spin_unlock(&busiest->lock);
lock_set_subclass(&this_rq->lock.dep_map, 0, _RET_IP_);
}
+
+/*
+ * double_rq_lock - safely lock two runqueues
+ *
+ * Note this does not disable interrupts like task_rq_lock,
+ * you need to do so manually before calling.
+ */
+static void double_rq_lock(struct rq *rq1, struct rq *rq2)
+ __acquires(rq1->lock)
+ __acquires(rq2->lock)
+{
+ BUG_ON(!irqs_disabled());
+ if (rq1 == rq2) {
+ raw_spin_lock(&rq1->lock);
+ __acquire(rq2->lock); /* Fake it out ;) */
+ } else {
+ if (rq1 < rq2) {
+ raw_spin_lock(&rq1->lock);
+ raw_spin_lock_nested(&rq2->lock, SINGLE_DEPTH_NESTING);
+ } else {
+ raw_spin_lock(&rq2->lock);
+ raw_spin_lock_nested(&rq1->lock, SINGLE_DEPTH_NESTING);
+ }
+ }
+ update_rq_clock(rq1);
+ update_rq_clock(rq2);
+}
+
+/*
+ * double_rq_unlock - safely unlock two runqueues
+ *
+ * Note this does not restore interrupts like task_rq_unlock,
+ * you need to do so manually after calling.
+ */
+static void double_rq_unlock(struct rq *rq1, struct rq *rq2)
+ __releases(rq1->lock)
+ __releases(rq2->lock)
+{
+ raw_spin_unlock(&rq1->lock);
+ if (rq1 != rq2)
+ raw_spin_unlock(&rq2->lock);
+ else
+ __release(rq2->lock);
+}
+
#endif
#ifdef CONFIG_FAIR_GROUP_SCHED
@@ -1834,18 +1879,14 @@ static inline void __set_task_cpu(struct task_struct *p, unsigned int cpu)
#endif
}
-#include "sched_stats.h"
-#include "sched_idletask.c"
-#include "sched_fair.c"
-#include "sched_rt.c"
-#ifdef CONFIG_SCHED_DEBUG
-# include "sched_debug.c"
-#endif
+static const struct sched_class rt_sched_class;
#define sched_class_highest (&rt_sched_class)
#define for_each_class(class) \
for (class = sched_class_highest; class; class = class->next)
+#include "sched_stats.h"
+
static void inc_nr_running(struct rq *rq)
{
rq->nr_running++;
@@ -1912,6 +1953,37 @@ static void dequeue_task(struct rq *rq, struct task_struct *p, int sleep)
}
/*
+ * activate_task - move a task to the runqueue.
+ */
+static void activate_task(struct rq *rq, struct task_struct *p, int wakeup)
+{
+ if (task_contributes_to_load(p))
+ rq->nr_uninterruptible--;
+
+ enqueue_task(rq, p, wakeup);
+ inc_nr_running(rq);
+}
+
+/*
+ * deactivate_task - remove a task from the runqueue.
+ */
+static void deactivate_task(struct rq *rq, struct task_struct *p, int sleep)
+{
+ if (task_contributes_to_load(p))
+ rq->nr_uninterruptible++;
+
+ dequeue_task(rq, p, sleep);
+ dec_nr_running(rq);
+}
+
+#include "sched_idletask.c"
+#include "sched_fair.c"
+#include "sched_rt.c"
+#ifdef CONFIG_SCHED_DEBUG
+# include "sched_debug.c"
+#endif
+
+/*
* __normal_prio - return the priority that is based on the static prio
*/
static inline int __normal_prio(struct task_struct *p)
@@ -1957,30 +2029,6 @@ static int effective_prio(struct task_struct *p)
return p->prio;
}
-/*
- * activate_task - move a task to the runqueue.
- */
-static void activate_task(struct rq *rq, struct task_struct *p, int wakeup)
-{
- if (task_contributes_to_load(p))
- rq->nr_uninterruptible--;
-
- enqueue_task(rq, p, wakeup);
- inc_nr_running(rq);
-}
-
-/*
- * deactivate_task - remove a task from the runqueue.
- */
-static void deactivate_task(struct rq *rq, struct task_struct *p, int sleep)
-{
- if (task_contributes_to_load(p))
- rq->nr_uninterruptible++;
-
- dequeue_task(rq, p, sleep);
- dec_nr_running(rq);
-}
-
/**
* task_curr - is this task currently executing on a CPU?
* @p: the task in question.
@@ -3088,50 +3136,6 @@ static void update_cpu_load(struct rq *this_rq)
#ifdef CONFIG_SMP
/*
- * double_rq_lock - safely lock two runqueues
- *
- * Note this does not disable interrupts like task_rq_lock,
- * you need to do so manually before calling.
- */
-static void double_rq_lock(struct rq *rq1, struct rq *rq2)
- __acquires(rq1->lock)
- __acquires(rq2->lock)
-{
- BUG_ON(!irqs_disabled());
- if (rq1 == rq2) {
- raw_spin_lock(&rq1->lock);
- __acquire(rq2->lock); /* Fake it out ;) */
- } else {
- if (rq1 < rq2) {
- raw_spin_lock(&rq1->lock);
- raw_spin_lock_nested(&rq2->lock, SINGLE_DEPTH_NESTING);
- } else {
- raw_spin_lock(&rq2->lock);
- raw_spin_lock_nested(&rq1->lock, SINGLE_DEPTH_NESTING);
- }
- }
- update_rq_clock(rq1);
- update_rq_clock(rq2);
-}
-
-/*
- * double_rq_unlock - safely unlock two runqueues
- *
- * Note this does not restore interrupts like task_rq_unlock,
- * you need to do so manually after calling.
- */
-static void double_rq_unlock(struct rq *rq1, struct rq *rq2)
- __releases(rq1->lock)
- __releases(rq2->lock)
-{
- raw_spin_unlock(&rq1->lock);
- if (rq1 != rq2)
- raw_spin_unlock(&rq2->lock);
- else
- __release(rq2->lock);
-}
-
-/*
* sched_exec - execve() is a valuable balancing opportunity, because at
* this point the task has the smallest effective memory and cache footprint.
*/
@@ -3179,1771 +3183,6 @@ again:
task_rq_unlock(rq, &flags);
}
-/*
- * pull_task - move a task from a remote runqueue to the local runqueue.
- * Both runqueues must be locked.
- */
-static void pull_task(struct rq *src_rq, struct task_struct *p,
- struct rq *this_rq, int this_cpu)
-{
- deactivate_task(src_rq, p, 0);
- set_task_cpu(p, this_cpu);
- activate_task(this_rq, p, 0);
- check_preempt_curr(this_rq, p, 0);
-}
-
-/*
- * can_migrate_task - may task p from runqueue rq be migrated to this_cpu?
- */
-static
-int can_migrate_task(struct task_struct *p, struct rq *rq, int this_cpu,
- struct sched_domain *sd, enum cpu_idle_type idle,
- int *all_pinned)
-{
- int tsk_cache_hot = 0;
- /*
- * We do not migrate tasks that are:
- * 1) running (obviously), or
- * 2) cannot be migrated to this CPU due to cpus_allowed, or
- * 3) are cache-hot on their current CPU.
- */
- if (!cpumask_test_cpu(this_cpu, &p->cpus_allowed)) {
- schedstat_inc(p, se.nr_failed_migrations_affine);
- return 0;
- }
- *all_pinned = 0;
-
- if (task_running(rq, p)) {
- schedstat_inc(p, se.nr_failed_migrations_running);
- return 0;
- }
-
- /*
- * Aggressive migration if:
- * 1) task is cache cold, or
- * 2) too many balance attempts have failed.
- */
-
- tsk_cache_hot = task_hot(p, rq->clock, sd);
- if (!tsk_cache_hot ||
- sd->nr_balance_failed > sd->cache_nice_tries) {
-#ifdef CONFIG_SCHEDSTATS
- if (tsk_cache_hot) {
- schedstat_inc(sd, lb_hot_gained[idle]);
- schedstat_inc(p, se.nr_forced_migrations);
- }
-#endif
- return 1;
- }
-
- if (tsk_cache_hot) {
- schedstat_inc(p, se.nr_failed_migrations_hot);
- return 0;
- }
- return 1;
-}
-
-static unsigned long
-balance_tasks(struct rq *this_rq, int this_cpu, struct rq *busiest,
- unsigned long max_load_move, struct sched_domain *sd,
- enum cpu_idle_type idle, int *all_pinned,
- int *this_best_prio, struct rq_iterator *iterator)
-{
- int loops = 0, pulled = 0, pinned = 0;
- struct task_struct *p;
- long rem_load_move = max_load_move;
-
- if (max_load_move == 0)
- goto out;
-
- pinned = 1;
-
- /*
- * Start the load-balancing iterator:
- */
- p = iterator->start(iterator->arg);
-next:
- if (!p || loops++ > sysctl_sched_nr_migrate)
- goto out;
-
- if ((p->se.load.weight >> 1) > rem_load_move ||
- !can_migrate_task(p, busiest, this_cpu, sd, idle, &pinned)) {
- p = iterator->next(iterator->arg);
- goto next;
- }
-
- pull_task(busiest, p, this_rq, this_cpu);
- pulled++;
- rem_load_move -= p->se.load.weight;
-
-#ifdef CONFIG_PREEMPT
- /*
- * NEWIDLE balancing is a source of latency, so preemptible kernels
- * will stop after the first task is pulled to minimize the critical
- * section.
- */
- if (idle == CPU_NEWLY_IDLE)
- goto out;
-#endif
-
- /*
- * We only want to steal up to the prescribed amount of weighted load.
- */
- if (rem_load_move > 0) {
- if (p->prio < *this_best_prio)
- *this_best_prio = p->prio;
- p = iterator->next(iterator->arg);
- goto next;
- }
-out:
- /*
- * Right now, this is one of only two places pull_task() is called,
- * so we can safely collect pull_task() stats here rather than
- * inside pull_task().
- */
- schedstat_add(sd, lb_gained[idle], pulled);
-
- if (all_pinned)
- *all_pinned = pinned;
-
- return max_load_move - rem_load_move;
-}
-
-/*
- * move_tasks tries to move up to max_load_move weighted load from busiest to
- * this_rq, as part of a balancing operation within domain "sd".
- * Returns 1 if successful and 0 otherwise.
- *
- * Called with both runqueues locked.
- */
-static int move_tasks(struct rq *this_rq, int this_cpu, struct rq *busiest,
- unsigned long max_load_move,
- struct sched_domain *sd, enum cpu_idle_type idle,
- int *all_pinned)
-{
- const struct sched_class *class = sched_class_highest;
- unsigned long total_load_moved = 0;
- int this_best_prio = this_rq->curr->prio;
-
- do {
- total_load_moved +=
- class->load_balance(this_rq, this_cpu, busiest,
- max_load_move - total_load_moved,
- sd, idle, all_pinned, &this_best_prio);
- class = class->next;
-
-#ifdef CONFIG_PREEMPT
- /*
- * NEWIDLE balancing is a source of latency, so preemptible
- * kernels will stop after the first task is pulled to minimize
- * the critical section.
- */
- if (idle == CPU_NEWLY_IDLE && this_rq->nr_running)
- break;
-#endif
- } while (class && max_load_move > total_load_moved);
-
- return total_load_moved > 0;
-}
-
-static int
-iter_move_one_task(struct rq *this_rq, int this_cpu, struct rq *busiest,
- struct sched_domain *sd, enum cpu_idle_type idle,
- struct rq_iterator *iterator)
-{
- struct task_struct *p = iterator->start(iterator->arg);
- int pinned = 0;
-
- while (p) {
- if (can_migrate_task(p, busiest, this_cpu, sd, idle, &pinned)) {
- pull_task(busiest, p, this_rq, this_cpu);
- /*
- * Right now, this is only the second place pull_task()
- * is called, so we can safely collect pull_task()
- * stats here rather than inside pull_task().
- */
- schedstat_inc(sd, lb_gained[idle]);
-
- return 1;
- }
- p = iterator->next(iterator->arg);
- }
-
- return 0;
-}
-
-/*
- * move_one_task tries to move exactly one task from busiest to this_rq, as
- * part of active balancing operations within "domain".
- * Returns 1 if successful and 0 otherwise.
- *
- * Called with both runqueues locked.
- */
-static int move_one_task(struct rq *this_rq, int this_cpu, struct rq *busiest,
- struct sched_domain *sd, enum cpu_idle_type idle)
-{
- const struct sched_class *class;
-
- for_each_class(class) {
- if (class->move_one_task(this_rq, this_cpu, busiest, sd, idle))
- return 1;
- }
-
- return 0;
-}
-/********** Helpers for find_busiest_group ************************/
-/*
- * sd_lb_stats - Structure to store the statistics of a sched_domain
- * during load balancing.
- */
-struct sd_lb_stats {
- struct sched_group *busiest; /* Busiest group in this sd */
- struct sched_group *this; /* Local group in this sd */
- unsigned long total_load; /* Total load of all groups in sd */
- unsigned long total_pwr; /* Total power of all groups in sd */
- unsigned long avg_load; /* Average load across all groups in sd */
-
- /** Statistics of this group */
- unsigned long this_load;
- unsigned long this_load_per_task;
- unsigned long this_nr_running;
-
- /* Statistics of the busiest group */
- unsigned long max_load;
- unsigned long busiest_load_per_task;
- unsigned long busiest_nr_running;
-
- int group_imb; /* Is there imbalance in this sd */
-#if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
- int power_savings_balance; /* Is powersave balance needed for this sd */
- struct sched_group *group_min; /* Least loaded group in sd */
- struct sched_group *group_leader; /* Group which relieves group_min */
- unsigned long min_load_per_task; /* load_per_task in group_min */
- unsigned long leader_nr_running; /* Nr running of group_leader */
- unsigned long min_nr_running; /* Nr running of group_min */
-#endif
-};
-
-/*
- * sg_lb_stats - stats of a sched_group required for load_balancing
- */
-struct sg_lb_stats {
- unsigned long avg_load; /*Avg load across the CPUs of the group */
- unsigned long group_load; /* Total load over the CPUs of the group */
- unsigned long sum_nr_running; /* Nr tasks running in the group */
- unsigned long sum_weighted_load; /* Weighted load of group's tasks */
- unsigned long group_capacity;
- int group_imb; /* Is there an imbalance in the group ? */
-};
-
-/**
- * group_first_cpu - Returns the first cpu in the cpumask of a sched_group.
- * @group: The group whose first cpu is to be returned.
- */
-static inline unsigned int group_first_cpu(struct sched_group *group)
-{
- return cpumask_first(sched_group_cpus(group));
-}
-
-/**
- * get_sd_load_idx - Obtain the load index for a given sched domain.
- * @sd: The sched_domain whose load_idx is to be obtained.
- * @idle: The Idle status of the CPU for whose sd load_icx is obtained.
- */
-static inline int get_sd_load_idx(struct sched_domain *sd,
- enum cpu_idle_type idle)
-{
- int load_idx;
-
- switch (idle) {
- case CPU_NOT_IDLE:
- load_idx = sd->busy_idx;
- break;
-
- case CPU_NEWLY_IDLE:
- load_idx = sd->newidle_idx;
- break;
- default:
- load_idx = sd->idle_idx;
- break;
- }
-
- return load_idx;
-}
-
-
-#if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
-/**
- * init_sd_power_savings_stats - Initialize power savings statistics for
- * the given sched_domain, during load balancing.
- *
- * @sd: Sched domain whose power-savings statistics are to be initialized.
- * @sds: Variable containing the statistics for sd.
- * @idle: Idle status of the CPU at which we're performing load-balancing.
- */
-static inline void init_sd_power_savings_stats(struct sched_domain *sd,
- struct sd_lb_stats *sds, enum cpu_idle_type idle)
-{
- /*
- * Busy processors will not participate in power savings
- * balance.
- */
- if (idle == CPU_NOT_IDLE || !(sd->flags & SD_POWERSAVINGS_BALANCE))
- sds->power_savings_balance = 0;
- else {
- sds->power_savings_balance = 1;
- sds->min_nr_running = ULONG_MAX;
- sds->leader_nr_running = 0;
- }
-}
-
-/**
- * update_sd_power_savings_stats - Update the power saving stats for a
- * sched_domain while performing load balancing.
- *
- * @group: sched_group belonging to the sched_domain under consideration.
- * @sds: Variable containing the statistics of the sched_domain
- * @local_group: Does group contain the CPU for which we're performing
- * load balancing ?
- * @sgs: Variable containing the statistics of the group.
- */
-static inline void update_sd_power_savings_stats(struct sched_group *group,
- struct sd_lb_stats *sds, int local_group, struct sg_lb_stats *sgs)
-{
-
- if (!sds->power_savings_balance)
- return;
-
- /*
- * If the local group is idle or completely loaded
- * no need to do power savings balance at this domain
- */
- if (local_group && (sds->this_nr_running >= sgs->group_capacity ||
- !sds->this_nr_running))
- sds->power_savings_balance = 0;
-
- /*
- * If a group is already running at full capacity or idle,
- * don't include that group in power savings calculations
- */
- if (!sds->power_savings_balance ||
- sgs->sum_nr_running >= sgs->group_capacity ||
- !sgs->sum_nr_running)
- return;
-
- /*
- * Calculate the group which has the least non-idle load.
- * This is the group from where we need to pick up the load
- * for saving power
- */
- if ((sgs->sum_nr_running < sds->min_nr_running) ||
- (sgs->sum_nr_running == sds->min_nr_running &&
- group_first_cpu(group) > group_first_cpu(sds->group_min))) {
- sds->group_min = group;
- sds->min_nr_running = sgs->sum_nr_running;
- sds->min_load_per_task = sgs->sum_weighted_load /
- sgs->sum_nr_running;
- }
-
- /*
- * Calculate the group which is almost near its
- * capacity but still has some space to pick up some load
- * from other group and save more power
- */
- if (sgs->sum_nr_running + 1 > sgs->group_capacity)
- return;
-
- if (sgs->sum_nr_running > sds->leader_nr_running ||
- (sgs->sum_nr_running == sds->leader_nr_running &&
- group_first_cpu(group) < group_first_cpu(sds->group_leader))) {
- sds->group_leader = group;
- sds->leader_nr_running = sgs->sum_nr_running;
- }
-}
-
-/**
- * check_power_save_busiest_group - see if there is potential for some power-savings balance
- * @sds: Variable containing the statistics of the sched_domain
- * under consideration.
- * @this_cpu: Cpu at which we're currently performing load-balancing.
- * @imbalance: Variable to store the imbalance.
- *
- * Description:
- * Check if we have potential to perform some power-savings balance.
- * If yes, set the busiest group to be the least loaded group in the
- * sched_domain, so that it's CPUs can be put to idle.
- *
- * Returns 1 if there is potential to perform power-savings balance.
- * Else returns 0.
- */
-static inline int check_power_save_busiest_group(struct sd_lb_stats *sds,
- int this_cpu, unsigned long *imbalance)
-{
- if (!sds->power_savings_balance)
- return 0;
-
- if (sds->this != sds->group_leader ||
- sds->group_leader == sds->group_min)
- return 0;
-
- *imbalance = sds->min_load_per_task;
- sds->busiest = sds->group_min;
-
- return 1;
-
-}
-#else /* CONFIG_SCHED_MC || CONFIG_SCHED_SMT */
-static inline void init_sd_power_savings_stats(struct sched_domain *sd,
- struct sd_lb_stats *sds, enum cpu_idle_type idle)
-{
- return;
-}
-
-static inline void update_sd_power_savings_stats(struct sched_group *group,
- struct sd_lb_stats *sds, int local_group, struct sg_lb_stats *sgs)
-{
- return;
-}
-
-static inline int check_power_save_busiest_group(struct sd_lb_stats *sds,
- int this_cpu, unsigned long *imbalance)
-{
- return 0;
-}
-#endif /* CONFIG_SCHED_MC || CONFIG_SCHED_SMT */
-
-
-unsigned long default_scale_freq_power(struct sched_domain *sd, int cpu)
-{
- return SCHED_LOAD_SCALE;
-}
-
-unsigned long __weak arch_scale_freq_power(struct sched_domain *sd, int cpu)
-{
- return default_scale_freq_power(sd, cpu);
-}
-
-unsigned long default_scale_smt_power(struct sched_domain *sd, int cpu)
-{
- unsigned long weight = cpumask_weight(sched_domain_span(sd));
- unsigned long smt_gain = sd->smt_gain;
-
- smt_gain /= weight;
-
- return smt_gain;
-}
-
-unsigned long __weak arch_scale_smt_power(struct sched_domain *sd, int cpu)
-{
- return default_scale_smt_power(sd, cpu);
-}
-
-unsigned long scale_rt_power(int cpu)
-{
- struct rq *rq = cpu_rq(cpu);
- u64 total, available;
-
- sched_avg_update(rq);
-
- total = sched_avg_period() + (rq->clock - rq->age_stamp);
- available = total - rq->rt_avg;
-
- if (unlikely((s64)total < SCHED_LOAD_SCALE))
- total = SCHED_LOAD_SCALE;
-
- total >>= SCHED_LOAD_SHIFT;
-
- return div_u64(available, total);
-}
-
-static void update_cpu_power(struct sched_domain *sd, int cpu)
-{
- unsigned long weight = cpumask_weight(sched_domain_span(sd));
- unsigned long power = SCHED_LOAD_SCALE;
- struct sched_group *sdg = sd->groups;
-
- if (sched_feat(ARCH_POWER))
- power *= arch_scale_freq_power(sd, cpu);
- else
- power *= default_scale_freq_power(sd, cpu);
-
- power >>= SCHED_LOAD_SHIFT;
-
- if ((sd->flags & SD_SHARE_CPUPOWER) && weight > 1) {
- if (sched_feat(ARCH_POWER))
- power *= arch_scale_smt_power(sd, cpu);
- else
- power *= default_scale_smt_power(sd, cpu);
-
- power >>= SCHED_LOAD_SHIFT;
- }
-
- power *= scale_rt_power(cpu);
- power >>= SCHED_LOAD_SHIFT;
-
- if (!power)
- power = 1;
-
- sdg->cpu_power = power;
-}
-
-static void update_group_power(struct sched_domain *sd, int cpu)
-{
- struct sched_domain *child = sd->child;
- struct sched_group *group, *sdg = sd->groups;
- unsigned long power;
-
- if (!child) {
- update_cpu_power(sd, cpu);
- return;
- }
-
- power = 0;
-
- group = child->groups;
- do {
- power += group->cpu_power;
- group = group->next;
- } while (group != child->groups);
-
- sdg->cpu_power = power;
-}
-
-/**
- * update_sg_lb_stats - Update sched_group's statistics for load balancing.
- * @sd: The sched_domain whose statistics are to be updated.
- * @group: sched_group whose statistics are to be updated.
- * @this_cpu: Cpu for which load balance is currently performed.
- * @idle: Idle status of this_cpu
- * @load_idx: Load index of sched_domain of this_cpu for load calc.
- * @sd_idle: Idle status of the sched_domain containing group.
- * @local_group: Does group contain this_cpu.
- * @cpus: Set of cpus considered for load balancing.
- * @balance: Should we balance.
- * @sgs: variable to hold the statistics for this group.
- */
-static inline void update_sg_lb_stats(struct sched_domain *sd,
- struct sched_group *group, int this_cpu,
- enum cpu_idle_type idle, int load_idx, int *sd_idle,
- int local_group, const struct cpumask *cpus,
- int *balance, struct sg_lb_stats *sgs)
-{
- unsigned long load, max_cpu_load, min_cpu_load;
- int i;
- unsigned int balance_cpu = -1, first_idle_cpu = 0;
- unsigned long sum_avg_load_per_task;
- unsigned long avg_load_per_task;
-
- if (local_group) {
- balance_cpu = group_first_cpu(group);
- if (balance_cpu == this_cpu)
- update_group_power(sd, this_cpu);
- }
-
- /* Tally up the load of all CPUs in the group */
- sum_avg_load_per_task = avg_load_per_task = 0;
- max_cpu_load = 0;
- min_cpu_load = ~0UL;
-
- for_each_cpu_and(i, sched_group_cpus(group), cpus) {
- struct rq *rq = cpu_rq(i);
-
- if (*sd_idle && rq->nr_running)
- *sd_idle = 0;
-
- /* Bias balancing toward cpus of our domain */
- if (local_group) {
- if (idle_cpu(i) && !first_idle_cpu) {
- first_idle_cpu = 1;
- balance_cpu = i;
- }
-
- load = target_load(i, load_idx);
- } else {
- load = source_load(i, load_idx);
- if (load > max_cpu_load)
- max_cpu_load = load;
- if (min_cpu_load > load)
- min_cpu_load = load;
- }
-
- sgs->group_load += load;
- sgs->sum_nr_running += rq->nr_running;
- sgs->sum_weighted_load += weighted_cpuload(i);
-
- sum_avg_load_per_task += cpu_avg_load_per_task(i);
- }
-
- /*
- * First idle cpu or the first cpu(busiest) in this sched group
- * is eligible for doing load balancing at this and above
- * domains. In the newly idle case, we will allow all the cpu's
- * to do the newly idle load balance.
- */
- if (idle != CPU_NEWLY_IDLE && local_group &&
- balance_cpu != this_cpu && balance) {
- *balance = 0;
- return;
- }
-
- /* Adjust by relative CPU power of the group */
- sgs->avg_load = (sgs->group_load * SCHED_LOAD_SCALE) / group->cpu_power;
-
-
- /*
- * Consider the group unbalanced when the imbalance is larger
- * than the average weight of two tasks.
- *
- * APZ: with cgroup the avg task weight can vary wildly and
- * might not be a suitable number - should we keep a
- * normalized nr_running number somewhere that negates
- * the hierarchy?
- */
- avg_load_per_task = (sum_avg_load_per_task * SCHED_LOAD_SCALE) /
- group->cpu_power;
-
- if ((max_cpu_load - min_cpu_load) > 2*avg_load_per_task)
- sgs->group_imb = 1;
-
- sgs->group_capacity =
- DIV_ROUND_CLOSEST(group->cpu_power, SCHED_LOAD_SCALE);
-}
-
-/**
- * update_sd_lb_stats - Update sched_group's statistics for load balancing.
- * @sd: sched_domain whose statistics are to be updated.
- * @this_cpu: Cpu for which load balance is currently performed.
- * @idle: Idle status of this_cpu
- * @sd_idle: Idle status of the sched_domain containing group.
- * @cpus: Set of cpus considered for load balancing.
- * @balance: Should we balance.
- * @sds: variable to hold the statistics for this sched_domain.
- */
-static inline void update_sd_lb_stats(struct sched_domain *sd, int this_cpu,
- enum cpu_idle_type idle, int *sd_idle,
- const struct cpumask *cpus, int *balance,
- struct sd_lb_stats *sds)
-{
- struct sched_domain *child = sd->child;
- struct sched_group *group = sd->groups;
- struct sg_lb_stats sgs;
- int load_idx, prefer_sibling = 0;
-
- if (child && child->flags & SD_PREFER_SIBLING)
- prefer_sibling = 1;
-
- init_sd_power_savings_stats(sd, sds, idle);
- load_idx = get_sd_load_idx(sd, idle);
-
- do {
- int local_group;
-
- local_group = cpumask_test_cpu(this_cpu,
- sched_group_cpus(group));
- memset(&sgs, 0, sizeof(sgs));
- update_sg_lb_stats(sd, group, this_cpu, idle, load_idx, sd_idle,
- local_group, cpus, balance, &sgs);
-
- if (local_group && balance && !(*balance))
- return;
-
- sds->total_load += sgs.group_load;
- sds->total_pwr += group->cpu_power;
-
- /*
- * In case the child domain prefers tasks go to siblings
- * first, lower the group capacity to one so that we'll try
- * and move all the excess tasks away.
- */
- if (prefer_sibling)
- sgs.group_capacity = min(sgs.group_capacity, 1UL);
-
- if (local_group) {
- sds->this_load = sgs.avg_load;
- sds->this = group;
- sds->this_nr_running = sgs.sum_nr_running;
- sds->this_load_per_task = sgs.sum_weighted_load;
- } else if (sgs.avg_load > sds->max_load &&
- (sgs.sum_nr_running > sgs.group_capacity ||
- sgs.group_imb)) {
- sds->max_load = sgs.avg_load;
- sds->busiest = group;
- sds->busiest_nr_running = sgs.sum_nr_running;
- sds->busiest_load_per_task = sgs.sum_weighted_load;
- sds->group_imb = sgs.group_imb;
- }
-
- update_sd_power_savings_stats(group, sds, local_group, &sgs);
- group = group->next;
- } while (group != sd->groups);
-}
-
-/**
- * fix_small_imbalance - Calculate the minor imbalance that exists
- * amongst the groups of a sched_domain, during
- * load balancing.
- * @sds: Statistics of the sched_domain whose imbalance is to be calculated.
- * @this_cpu: The cpu at whose sched_domain we're performing load-balance.
- * @imbalance: Variable to store the imbalance.
- */
-static inline void fix_small_imbalance(struct sd_lb_stats *sds,
- int this_cpu, unsigned long *imbalance)
-{
- unsigned long tmp, pwr_now = 0, pwr_move = 0;
- unsigned int imbn = 2;
-
- if (sds->this_nr_running) {
- sds->this_load_per_task /= sds->this_nr_running;
- if (sds->busiest_load_per_task >
- sds->this_load_per_task)
- imbn = 1;
- } else
- sds->this_load_per_task =
- cpu_avg_load_per_task(this_cpu);
-
- if (sds->max_load - sds->this_load + sds->busiest_load_per_task >=
- sds->busiest_load_per_task * imbn) {
- *imbalance = sds->busiest_load_per_task;
- return;
- }
-
- /*
- * OK, we don't have enough imbalance to justify moving tasks,
- * however we may be able to increase total CPU power used by
- * moving them.
- */
-
- pwr_now += sds->busiest->cpu_power *
- min(sds->busiest_load_per_task, sds->max_load);
- pwr_now += sds->this->cpu_power *
- min(sds->this_load_per_task, sds->this_load);
- pwr_now /= SCHED_LOAD_SCALE;
-
- /* Amount of load we'd subtract */
- tmp = (sds->busiest_load_per_task * SCHED_LOAD_SCALE) /
- sds->busiest->cpu_power;
- if (sds->max_load > tmp)
- pwr_move += sds->busiest->cpu_power *
- min(sds->busiest_load_per_task, sds->max_load - tmp);
-
- /* Amount of load we'd add */
- if (sds->max_load * sds->busiest->cpu_power <
- sds->busiest_load_per_task * SCHED_LOAD_SCALE)
- tmp = (sds->max_load * sds->busiest->cpu_power) /
- sds->this->cpu_power;
- else
- tmp = (sds->busiest_load_per_task * SCHED_LOAD_SCALE) /
- sds->this->cpu_power;
- pwr_move += sds->this->cpu_power *
- min(sds->this_load_per_task, sds->this_load + tmp);
- pwr_move /= SCHED_LOAD_SCALE;
-
- /* Move if we gain throughput */
- if (pwr_move > pwr_now)
- *imbalance = sds->busiest_load_per_task;
-}
-
-/**
- * calculate_imbalance - Calculate the amount of imbalance present within the
- * groups of a given sched_domain during load balance.
- * @sds: statistics of the sched_domain whose imbalance is to be calculated.
- * @this_cpu: Cpu for which currently load balance is being performed.
- * @imbalance: The variable to store the imbalance.
- */
-static inline void calculate_imbalance(struct sd_lb_stats *sds, int this_cpu,
- unsigned long *imbalance)
-{
- unsigned long max_pull;
- /*
- * In the presence of smp nice balancing, certain scenarios can have
- * max load less than avg load(as we skip the groups at or below
- * its cpu_power, while calculating max_load..)
- */
- if (sds->max_load < sds->avg_load) {
- *imbalance = 0;
- return fix_small_imbalance(sds, this_cpu, imbalance);
- }
-
- /* Don't want to pull so many tasks that a group would go idle */
- max_pull = min(sds->max_load - sds->avg_load,
- sds->max_load - sds->busiest_load_per_task);
-
- /* How much load to actually move to equalise the imbalance */
- *imbalance = min(max_pull * sds->busiest->cpu_power,
- (sds->avg_load - sds->this_load) * sds->this->cpu_power)
- / SCHED_LOAD_SCALE;
-
- /*
- * if *imbalance is less than the average load per runnable task
- * there is no gaurantee that any tasks will be moved so we'll have
- * a think about bumping its value to force at least one task to be
- * moved
- */
- if (*imbalance < sds->busiest_load_per_task)
- return fix_small_imbalance(sds, this_cpu, imbalance);
-
-}
-/******* find_busiest_group() helpers end here *********************/
-
-/**
- * find_busiest_group - Returns the busiest group within the sched_domain
- * if there is an imbalance. If there isn't an imbalance, and
- * the user has opted for power-savings, it returns a group whose
- * CPUs can be put to idle by rebalancing those tasks elsewhere, if
- * such a group exists.
- *
- * Also calculates the amount of weighted load which should be moved
- * to restore balance.
- *
- * @sd: The sched_domain whose busiest group is to be returned.
- * @this_cpu: The cpu for which load balancing is currently being performed.
- * @imbalance: Variable which stores amount of weighted load which should
- * be moved to restore balance/put a group to idle.
- * @idle: The idle status of this_cpu.
- * @sd_idle: The idleness of sd
- * @cpus: The set of CPUs under consideration for load-balancing.
- * @balance: Pointer to a variable indicating if this_cpu
- * is the appropriate cpu to perform load balancing at this_level.
- *
- * Returns: - the busiest group if imbalance exists.
- * - If no imbalance and user has opted for power-savings balance,
- * return the least loaded group whose CPUs can be
- * put to idle by rebalancing its tasks onto our group.
- */
-static struct sched_group *
-find_busiest_group(struct sched_domain *sd, int this_cpu,
- unsigned long *imbalance, enum cpu_idle_type idle,
- int *sd_idle, const struct cpumask *cpus, int *balance)
-{
- struct sd_lb_stats sds;
-
- memset(&sds, 0, sizeof(sds));
-
- /*
- * Compute the various statistics relavent for load balancing at
- * this level.
- */
- update_sd_lb_stats(sd, this_cpu, idle, sd_idle, cpus,
- balance, &sds);
-
- /* Cases where imbalance does not exist from POV of this_cpu */
- /* 1) this_cpu is not the appropriate cpu to perform load balancing
- * at this level.
- * 2) There is no busy sibling group to pull from.
- * 3) This group is the busiest group.
- * 4) This group is more busy than the avg busieness at this
- * sched_domain.
- * 5) The imbalance is within the specified limit.
- * 6) Any rebalance would lead to ping-pong
- */
- if (balance && !(*balance))
- goto ret;
-
- if (!sds.busiest || sds.busiest_nr_running == 0)
- goto out_balanced;
-
- if (sds.this_load >= sds.max_load)
- goto out_balanced;
-
- sds.avg_load = (SCHED_LOAD_SCALE * sds.total_load) / sds.total_pwr;
-
- if (sds.this_load >= sds.avg_load)
- goto out_balanced;
-
- if (100 * sds.max_load <= sd->imbalance_pct * sds.this_load)
- goto out_balanced;
-
- sds.busiest_load_per_task /= sds.busiest_nr_running;
- if (sds.group_imb)
- sds.busiest_load_per_task =
- min(sds.busiest_load_per_task, sds.avg_load);
-
- /*
- * We're trying to get all the cpus to the average_load, so we don't
- * want to push ourselves above the average load, nor do we wish to
- * reduce the max loaded cpu below the average load, as either of these
- * actions would just result in more rebalancing later, and ping-pong
- * tasks around. Thus we look for the minimum possible imbalance.
- * Negative imbalances (*we* are more loaded than anyone else) will
- * be counted as no imbalance for these purposes -- we can't fix that
- * by pulling tasks to us. Be careful of negative numbers as they'll
- * appear as very large values with unsigned longs.
- */
- if (sds.max_load <= sds.busiest_load_per_task)
- goto out_balanced;
-
- /* Looks like there is an imbalance. Compute it */
- calculate_imbalance(&sds, this_cpu, imbalance);
- return sds.busiest;
-
-out_balanced:
- /*
- * There is no obvious imbalance. But check if we can do some balancing
- * to save power.
- */
- if (check_power_save_busiest_group(&sds, this_cpu, imbalance))
- return sds.busiest;
-ret:
- *imbalance = 0;
- return NULL;
-}
-
-/*
- * find_busiest_queue - find the busiest runqueue among the cpus in group.
- */
-static struct rq *
-find_busiest_queue(struct sched_group *group, enum cpu_idle_type idle,
- unsigned long imbalance, const struct cpumask *cpus)
-{
- struct rq *busiest = NULL, *rq;
- unsigned long max_load = 0;
- int i;
-
- for_each_cpu(i, sched_group_cpus(group)) {
- unsigned long power = power_of(i);
- unsigned long capacity = DIV_ROUND_CLOSEST(power, SCHED_LOAD_SCALE);
- unsigned long wl;
-
- if (!cpumask_test_cpu(i, cpus))
- continue;
-
- rq = cpu_rq(i);
- wl = weighted_cpuload(i) * SCHED_LOAD_SCALE;
- wl /= power;
-
- if (capacity && rq->nr_running == 1 && wl > imbalance)
- continue;
-
- if (wl > max_load) {
- max_load = wl;
- busiest = rq;
- }
- }
-
- return busiest;
-}
-
-/*
- * Max backoff if we encounter pinned tasks. Pretty arbitrary value, but
- * so long as it is large enough.
- */
-#define MAX_PINNED_INTERVAL 512
-
-/* Working cpumask for load_balance and load_balance_newidle. */
-static DEFINE_PER_CPU(cpumask_var_t, load_balance_tmpmask);
-
-/*
- * Check this_cpu to ensure it is balanced within domain. Attempt to move
- * tasks if there is an imbalance.
- */
-static int load_balance(int this_cpu, struct rq *this_rq,
- struct sched_domain *sd, enum cpu_idle_type idle,
- int *balance)
-{
- int ld_moved, all_pinned = 0, active_balance = 0, sd_idle = 0;
- struct sched_group *group;
- unsigned long imbalance;
- struct rq *busiest;
- unsigned long flags;
- struct cpumask *cpus = __get_cpu_var(load_balance_tmpmask);
-
- cpumask_copy(cpus, cpu_active_mask);
-
- /*
- * When power savings policy is enabled for the parent domain, idle
- * sibling can pick up load irrespective of busy siblings. In this case,
- * let the state of idle sibling percolate up as CPU_IDLE, instead of
- * portraying it as CPU_NOT_IDLE.
- */
- if (idle != CPU_NOT_IDLE && sd->flags & SD_SHARE_CPUPOWER &&
- !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE))
- sd_idle = 1;
-
- schedstat_inc(sd, lb_count[idle]);
-
-redo:
- update_shares(sd);
- group = find_busiest_group(sd, this_cpu, &imbalance, idle, &sd_idle,
- cpus, balance);
-
- if (*balance == 0)
- goto out_balanced;
-
- if (!group) {
- schedstat_inc(sd, lb_nobusyg[idle]);
- goto out_balanced;
- }
-
- busiest = find_busiest_queue(group, idle, imbalance, cpus);
- if (!busiest) {
- schedstat_inc(sd, lb_nobusyq[idle]);
- goto out_balanced;
- }
-
- BUG_ON(busiest == this_rq);
-
- schedstat_add(sd, lb_imbalance[idle], imbalance);
-
- ld_moved = 0;
- if (busiest->nr_running > 1) {
- /*
- * Attempt to move tasks. If find_busiest_group has found
- * an imbalance but busiest->nr_running <= 1, the group is
- * still unbalanced. ld_moved simply stays zero, so it is
- * correctly treated as an imbalance.
- */
- local_irq_save(flags);
- double_rq_lock(this_rq, busiest);
- ld_moved = move_tasks(this_rq, this_cpu, busiest,
- imbalance, sd, idle, &all_pinned);
- double_rq_unlock(this_rq, busiest);
- local_irq_restore(flags);
-
- /*
- * some other cpu did the load balance for us.
- */
- if (ld_moved && this_cpu != smp_processor_id())
- resched_cpu(this_cpu);
-
- /* All tasks on this runqueue were pinned by CPU affinity */
- if (unlikely(all_pinned)) {
- cpumask_clear_cpu(cpu_of(busiest), cpus);
- if (!cpumask_empty(cpus))
- goto redo;
- goto out_balanced;
- }
- }
-
- if (!ld_moved) {
- schedstat_inc(sd, lb_failed[idle]);
- sd->nr_balance_failed++;
-
- if (unlikely(sd->nr_balance_failed > sd->cache_nice_tries+2)) {
-
- raw_spin_lock_irqsave(&busiest->lock, flags);
-
- /* don't kick the migration_thread, if the curr
- * task on busiest cpu can't be moved to this_cpu
- */
- if (!cpumask_test_cpu(this_cpu,
- &busiest->curr->cpus_allowed)) {
- raw_spin_unlock_irqrestore(&busiest->lock,
- flags);
- all_pinned = 1;
- goto out_one_pinned;
- }
-
- if (!busiest->active_balance) {
- busiest->active_balance = 1;
- busiest->push_cpu = this_cpu;
- active_balance = 1;
- }
- raw_spin_unlock_irqrestore(&busiest->lock, flags);
- if (active_balance)
- wake_up_process(busiest->migration_thread);
-
- /*
- * We've kicked active balancing, reset the failure
- * counter.
- */
- sd->nr_balance_failed = sd->cache_nice_tries+1;
- }
- } else
- sd->nr_balance_failed = 0;
-
- if (likely(!active_balance)) {
- /* We were unbalanced, so reset the balancing interval */
- sd->balance_interval = sd->min_interval;
- } else {
- /*
- * If we've begun active balancing, start to back off. This
- * case may not be covered by the all_pinned logic if there
- * is only 1 task on the busy runqueue (because we don't call
- * move_tasks).
- */
- if (sd->balance_interval < sd->max_interval)
- sd->balance_interval *= 2;
- }
-
- if (!ld_moved && !sd_idle && sd->flags & SD_SHARE_CPUPOWER &&
- !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE))
- ld_moved = -1;
-
- goto out;
-
-out_balanced:
- schedstat_inc(sd, lb_balanced[idle]);
-
- sd->nr_balance_failed = 0;
-
-out_one_pinned:
- /* tune up the balancing interval */
- if ((all_pinned && sd->balance_interval < MAX_PINNED_INTERVAL) ||
- (sd->balance_interval < sd->max_interval))
- sd->balance_interval *= 2;
-
- if (!sd_idle && sd->flags & SD_SHARE_CPUPOWER &&
- !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE))
- ld_moved = -1;
- else
- ld_moved = 0;
-out:
- if (ld_moved)
- update_shares(sd);
- return ld_moved;
-}
-
-/*
- * Check this_cpu to ensure it is balanced within domain. Attempt to move
- * tasks if there is an imbalance.
- *
- * Called from schedule when this_rq is about to become idle (CPU_NEWLY_IDLE).
- * this_rq is locked.
- */
-static int
-load_balance_newidle(int this_cpu, struct rq *this_rq, struct sched_domain *sd)
-{
- struct sched_group *group;
- struct rq *busiest = NULL;
- unsigned long imbalance;
- int ld_moved = 0;
- int sd_idle = 0;
- int all_pinned = 0;
- struct cpumask *cpus = __get_cpu_var(load_balance_tmpmask);
-
- cpumask_copy(cpus, cpu_active_mask);
-
- /*
- * When power savings policy is enabled for the parent domain, idle
- * sibling can pick up load irrespective of busy siblings. In this case,
- * let the state of idle sibling percolate up as IDLE, instead of
- * portraying it as CPU_NOT_IDLE.
- */
- if (sd->flags & SD_SHARE_CPUPOWER &&
- !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE))
- sd_idle = 1;
-
- schedstat_inc(sd, lb_count[CPU_NEWLY_IDLE]);
-redo:
- update_shares_locked(this_rq, sd);
- group = find_busiest_group(sd, this_cpu, &imbalance, CPU_NEWLY_IDLE,
- &sd_idle, cpus, NULL);
- if (!group) {
- schedstat_inc(sd, lb_nobusyg[CPU_NEWLY_IDLE]);
- goto out_balanced;
- }
-
- busiest = find_busiest_queue(group, CPU_NEWLY_IDLE, imbalance, cpus);
- if (!busiest) {
- schedstat_inc(sd, lb_nobusyq[CPU_NEWLY_IDLE]);
- goto out_balanced;
- }
-
- BUG_ON(busiest == this_rq);
-
- schedstat_add(sd, lb_imbalance[CPU_NEWLY_IDLE], imbalance);
-
- ld_moved = 0;
- if (busiest->nr_running > 1) {
- /* Attempt to move tasks */
- double_lock_balance(this_rq, busiest);
- /* this_rq->clock is already updated */
- update_rq_clock(busiest);
- ld_moved = move_tasks(this_rq, this_cpu, busiest,
- imbalance, sd, CPU_NEWLY_IDLE,
- &all_pinned);
- double_unlock_balance(this_rq, busiest);
-
- if (unlikely(all_pinned)) {
- cpumask_clear_cpu(cpu_of(busiest), cpus);
- if (!cpumask_empty(cpus))
- goto redo;
- }
- }
-
- if (!ld_moved) {
- int active_balance = 0;
-
- schedstat_inc(sd, lb_failed[CPU_NEWLY_IDLE]);
- if (!sd_idle && sd->flags & SD_SHARE_CPUPOWER &&
- !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE))
- return -1;
-
- if (sched_mc_power_savings < POWERSAVINGS_BALANCE_WAKEUP)
- return -1;
-
- if (sd->nr_balance_failed++ < 2)
- return -1;
-
- /*
- * The only task running in a non-idle cpu can be moved to this
- * cpu in an attempt to completely freeup the other CPU
- * package. The same method used to move task in load_balance()
- * have been extended for load_balance_newidle() to speedup
- * consolidation at sched_mc=POWERSAVINGS_BALANCE_WAKEUP (2)
- *
- * The package power saving logic comes from
- * find_busiest_group(). If there are no imbalance, then
- * f_b_g() will return NULL. However when sched_mc={1,2} then
- * f_b_g() will select a group from which a running task may be
- * pulled to this cpu in order to make the other package idle.
- * If there is no opportunity to make a package idle and if
- * there are no imbalance, then f_b_g() will return NULL and no
- * action will be taken in load_balance_newidle().
- *
- * Under normal task pull operation due to imbalance, there
- * will be more than one task in the source run queue and
- * move_tasks() will succeed. ld_moved will be true and this
- * active balance code will not be triggered.
- */
-
- /* Lock busiest in correct order while this_rq is held */
- double_lock_balance(this_rq, busiest);
-
- /*
- * don't kick the migration_thread, if the curr
- * task on busiest cpu can't be moved to this_cpu
- */
- if (!cpumask_test_cpu(this_cpu, &busiest->curr->cpus_allowed)) {
- double_unlock_balance(this_rq, busiest);
- all_pinned = 1;
- return ld_moved;
- }
-
- if (!busiest->active_balance) {
- busiest->active_balance = 1;
- busiest->push_cpu = this_cpu;
- active_balance = 1;
- }
-
- double_unlock_balance(this_rq, busiest);
- /*
- * Should not call ttwu while holding a rq->lock
- */
- raw_spin_unlock(&this_rq->lock);
- if (active_balance)
- wake_up_process(busiest->migration_thread);
- raw_spin_lock(&this_rq->lock);
-
- } else
- sd->nr_balance_failed = 0;
-
- update_shares_locked(this_rq, sd);
- return ld_moved;
-
-out_balanced:
- schedstat_inc(sd, lb_balanced[CPU_NEWLY_IDLE]);
- if (!sd_idle && sd->flags & SD_SHARE_CPUPOWER &&
- !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE))
- return -1;
- sd->nr_balance_failed = 0;
-
- return 0;
-}
-
-/*
- * idle_balance is called by schedule() if this_cpu is about to become
- * idle. Attempts to pull tasks from other CPUs.
- */
-static void idle_balance(int this_cpu, struct rq *this_rq)
-{
- struct sched_domain *sd;
- int pulled_task = 0;
- unsigned long next_balance = jiffies + HZ;
-
- this_rq->idle_stamp = this_rq->clock;
-
- if (this_rq->avg_idle < sysctl_sched_migration_cost)
- return;
-
- for_each_domain(this_cpu, sd) {
- unsigned long interval;
-
- if (!(sd->flags & SD_LOAD_BALANCE))
- continue;
-
- if (sd->flags & SD_BALANCE_NEWIDLE)
- /* If we've pulled tasks over stop searching: */
- pulled_task = load_balance_newidle(this_cpu, this_rq,
- sd);
-
- interval = msecs_to_jiffies(sd->balance_interval);
- if (time_after(next_balance, sd->last_balance + interval))
- next_balance = sd->last_balance + interval;
- if (pulled_task) {
- this_rq->idle_stamp = 0;
- break;
- }
- }
- if (pulled_task || time_after(jiffies, this_rq->next_balance)) {
- /*
- * We are going idle. next_balance may be set based on
- * a busy processor. So reset next_balance.
- */
- this_rq->next_balance = next_balance;
- }
-}
-
-/*
- * active_load_balance is run by migration threads. It pushes running tasks
- * off the busiest CPU onto idle CPUs. It requires at least 1 task to be
- * running on each physical CPU where possible, and avoids physical /
- * logical imbalances.
- *
- * Called with busiest_rq locked.
- */
-static void active_load_balance(struct rq *busiest_rq, int busiest_cpu)
-{
- int target_cpu = busiest_rq->push_cpu;
- struct sched_domain *sd;
- struct rq *target_rq;
-
- /* Is there any task to move? */
- if (busiest_rq->nr_running <= 1)
- return;
-
- target_rq = cpu_rq(target_cpu);
-
- /*
- * This condition is "impossible", if it occurs
- * we need to fix it. Originally reported by
- * Bjorn Helgaas on a 128-cpu setup.
- */
- BUG_ON(busiest_rq == target_rq);
-
- /* move a task from busiest_rq to target_rq */
- double_lock_balance(busiest_rq, target_rq);
- update_rq_clock(busiest_rq);
- update_rq_clock(target_rq);
-
- /* Search for an sd spanning us and the target CPU. */
- for_each_domain(target_cpu, sd) {
- if ((sd->flags & SD_LOAD_BALANCE) &&
- cpumask_test_cpu(busiest_cpu, sched_domain_span(sd)))
- break;
- }
-
- if (likely(sd)) {
- schedstat_inc(sd, alb_count);
-
- if (move_one_task(target_rq, target_cpu, busiest_rq,
- sd, CPU_IDLE))
- schedstat_inc(sd, alb_pushed);
- else
- schedstat_inc(sd, alb_failed);
- }
- double_unlock_balance(busiest_rq, target_rq);
-}
-
-#ifdef CONFIG_NO_HZ
-static struct {
- atomic_t load_balancer;
- cpumask_var_t cpu_mask;
- cpumask_var_t ilb_grp_nohz_mask;
-} nohz ____cacheline_aligned = {
- .load_balancer = ATOMIC_INIT(-1),
-};
-
-int get_nohz_load_balancer(void)
-{
- return atomic_read(&nohz.load_balancer);
-}
-
-#if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
-/**
- * lowest_flag_domain - Return lowest sched_domain containing flag.
- * @cpu: The cpu whose lowest level of sched domain is to
- * be returned.
- * @flag: The flag to check for the lowest sched_domain
- * for the given cpu.
- *
- * Returns the lowest sched_domain of a cpu which contains the given flag.
- */
-static inline struct sched_domain *lowest_flag_domain(int cpu, int flag)
-{
- struct sched_domain *sd;
-
- for_each_domain(cpu, sd)
- if (sd && (sd->flags & flag))
- break;
-
- return sd;
-}
-
-/**
- * for_each_flag_domain - Iterates over sched_domains containing the flag.
- * @cpu: The cpu whose domains we're iterating over.
- * @sd: variable holding the value of the power_savings_sd
- * for cpu.
- * @flag: The flag to filter the sched_domains to be iterated.
- *
- * Iterates over all the scheduler domains for a given cpu that has the 'flag'
- * set, starting from the lowest sched_domain to the highest.
- */
-#define for_each_flag_domain(cpu, sd, flag) \
- for (sd = lowest_flag_domain(cpu, flag); \
- (sd && (sd->flags & flag)); sd = sd->parent)
-
-/**
- * is_semi_idle_group - Checks if the given sched_group is semi-idle.
- * @ilb_group: group to be checked for semi-idleness
- *
- * Returns: 1 if the group is semi-idle. 0 otherwise.
- *
- * We define a sched_group to be semi idle if it has atleast one idle-CPU
- * and atleast one non-idle CPU. This helper function checks if the given
- * sched_group is semi-idle or not.
- */
-static inline int is_semi_idle_group(struct sched_group *ilb_group)
-{
- cpumask_and(nohz.ilb_grp_nohz_mask, nohz.cpu_mask,
- sched_group_cpus(ilb_group));
-
- /*
- * A sched_group is semi-idle when it has atleast one busy cpu
- * and atleast one idle cpu.
- */
- if (cpumask_empty(nohz.ilb_grp_nohz_mask))
- return 0;
-
- if (cpumask_equal(nohz.ilb_grp_nohz_mask, sched_group_cpus(ilb_group)))
- return 0;
-
- return 1;
-}
-/**
- * find_new_ilb - Finds the optimum idle load balancer for nomination.
- * @cpu: The cpu which is nominating a new idle_load_balancer.
- *
- * Returns: Returns the id of the idle load balancer if it exists,
- * Else, returns >= nr_cpu_ids.
- *
- * This algorithm picks the idle load balancer such that it belongs to a
- * semi-idle powersavings sched_domain. The idea is to try and avoid
- * completely idle packages/cores just for the purpose of idle load balancing
- * when there are other idle cpu's which are better suited for that job.
- */
-static int find_new_ilb(int cpu)
-{
- struct sched_domain *sd;
- struct sched_group *ilb_group;
-
- /*
- * Have idle load balancer selection from semi-idle packages only
- * when power-aware load balancing is enabled
- */
- if (!(sched_smt_power_savings || sched_mc_power_savings))
- goto out_done;
-
- /*
- * Optimize for the case when we have no idle CPUs or only one
- * idle CPU. Don't walk the sched_domain hierarchy in such cases
- */
- if (cpumask_weight(nohz.cpu_mask) < 2)
- goto out_done;
-
- for_each_flag_domain(cpu, sd, SD_POWERSAVINGS_BALANCE) {
- ilb_group = sd->groups;
-
- do {
- if (is_semi_idle_group(ilb_group))
- return cpumask_first(nohz.ilb_grp_nohz_mask);
-
- ilb_group = ilb_group->next;
-
- } while (ilb_group != sd->groups);
- }
-
-out_done:
- return cpumask_first(nohz.cpu_mask);
-}
-#else /* (CONFIG_SCHED_MC || CONFIG_SCHED_SMT) */
-static inline int find_new_ilb(int call_cpu)
-{
- return cpumask_first(nohz.cpu_mask);
-}
-#endif
-
-/*
- * This routine will try to nominate the ilb (idle load balancing)
- * owner among the cpus whose ticks are stopped. ilb owner will do the idle
- * load balancing on behalf of all those cpus. If all the cpus in the system
- * go into this tickless mode, then there will be no ilb owner (as there is
- * no need for one) and all the cpus will sleep till the next wakeup event
- * arrives...
- *
- * For the ilb owner, tick is not stopped. And this tick will be used
- * for idle load balancing. ilb owner will still be part of
- * nohz.cpu_mask..
- *
- * While stopping the tick, this cpu will become the ilb owner if there
- * is no other owner. And will be the owner till that cpu becomes busy
- * or if all cpus in the system stop their ticks at which point
- * there is no need for ilb owner.
- *
- * When the ilb owner becomes busy, it nominates another owner, during the
- * next busy scheduler_tick()
- */
-int select_nohz_load_balancer(int stop_tick)
-{
- int cpu = smp_processor_id();
-
- if (stop_tick) {
- cpu_rq(cpu)->in_nohz_recently = 1;
-
- if (!cpu_active(cpu)) {
- if (atomic_read(&nohz.load_balancer) != cpu)
- return 0;
-
- /*
- * If we are going offline and still the leader,
- * give up!
- */
- if (atomic_cmpxchg(&nohz.load_balancer, cpu, -1) != cpu)
- BUG();
-
- return 0;
- }
-
- cpumask_set_cpu(cpu, nohz.cpu_mask);
-
- /* time for ilb owner also to sleep */
- if (cpumask_weight(nohz.cpu_mask) == num_active_cpus()) {
- if (atomic_read(&nohz.load_balancer) == cpu)
- atomic_set(&nohz.load_balancer, -1);
- return 0;
- }
-
- if (atomic_read(&nohz.load_balancer) == -1) {
- /* make me the ilb owner */
- if (atomic_cmpxchg(&nohz.load_balancer, -1, cpu) == -1)
- return 1;
- } else if (atomic_read(&nohz.load_balancer) == cpu) {
- int new_ilb;
-
- if (!(sched_smt_power_savings ||
- sched_mc_power_savings))
- return 1;
- /*
- * Check to see if there is a more power-efficient
- * ilb.
- */
- new_ilb = find_new_ilb(cpu);
- if (new_ilb < nr_cpu_ids && new_ilb != cpu) {
- atomic_set(&nohz.load_balancer, -1);
- resched_cpu(new_ilb);
- return 0;
- }
- return 1;
- }
- } else {
- if (!cpumask_test_cpu(cpu, nohz.cpu_mask))
- return 0;
-
- cpumask_clear_cpu(cpu, nohz.cpu_mask);
-
- if (atomic_read(&nohz.load_balancer) == cpu)
- if (atomic_cmpxchg(&nohz.load_balancer, cpu, -1) != cpu)
- BUG();
- }
- return 0;
-}
-#endif
-
-static DEFINE_SPINLOCK(balancing);
-
-/*
- * It checks each scheduling domain to see if it is due to be balanced,
- * and initiates a balancing operation if so.
- *
- * Balancing parameters are set up in arch_init_sched_domains.
- */
-static void rebalance_domains(int cpu, enum cpu_idle_type idle)
-{
- int balance = 1;
- struct rq *rq = cpu_rq(cpu);
- unsigned long interval;
- struct sched_domain *sd;
- /* Earliest time when we have to do rebalance again */
- unsigned long next_balance = jiffies + 60*HZ;
- int update_next_balance = 0;
- int need_serialize;
-
- for_each_domain(cpu, sd) {
- if (!(sd->flags & SD_LOAD_BALANCE))
- continue;
-
- interval = sd->balance_interval;
- if (idle != CPU_IDLE)
- interval *= sd->busy_factor;
-
- /* scale ms to jiffies */
- interval = msecs_to_jiffies(interval);
- if (unlikely(!interval))
- interval = 1;
- if (interval > HZ*NR_CPUS/10)
- interval = HZ*NR_CPUS/10;
-
- need_serialize = sd->flags & SD_SERIALIZE;
-
- if (need_serialize) {
- if (!spin_trylock(&balancing))
- goto out;
- }
-
- if (time_after_eq(jiffies, sd->last_balance + interval)) {
- if (load_balance(cpu, rq, sd, idle, &balance)) {
- /*
- * We've pulled tasks over so either we're no
- * longer idle, or one of our SMT siblings is
- * not idle.
- */
- idle = CPU_NOT_IDLE;
- }
- sd->last_balance = jiffies;
- }
- if (need_serialize)
- spin_unlock(&balancing);
-out:
- if (time_after(next_balance, sd->last_balance + interval)) {
- next_balance = sd->last_balance + interval;
- update_next_balance = 1;
- }
-
- /*
- * Stop the load balance at this level. There is another
- * CPU in our sched group which is doing load balancing more
- * actively.
- */
- if (!balance)
- break;
- }
-
- /*
- * next_balance will be updated only when there is a need.
- * When the cpu is attached to null domain for ex, it will not be
- * updated.
- */
- if (likely(update_next_balance))
- rq->next_balance = next_balance;
-}
-
-/*
- * run_rebalance_domains is triggered when needed from the scheduler tick.
- * In CONFIG_NO_HZ case, the idle load balance owner will do the
- * rebalancing for all the cpus for whom scheduler ticks are stopped.
- */
-static void run_rebalance_domains(struct softirq_action *h)
-{
- int this_cpu = smp_processor_id();
- struct rq *this_rq = cpu_rq(this_cpu);
- enum cpu_idle_type idle = this_rq->idle_at_tick ?
- CPU_IDLE : CPU_NOT_IDLE;
-
- rebalance_domains(this_cpu, idle);
-
-#ifdef CONFIG_NO_HZ
- /*
- * If this cpu is the owner for idle load balancing, then do the
- * balancing on behalf of the other idle cpus whose ticks are
- * stopped.
- */
- if (this_rq->idle_at_tick &&
- atomic_read(&nohz.load_balancer) == this_cpu) {
- struct rq *rq;
- int balance_cpu;
-
- for_each_cpu(balance_cpu, nohz.cpu_mask) {
- if (balance_cpu == this_cpu)
- continue;
-
- /*
- * If this cpu gets work to do, stop the load balancing
- * work being done for other cpus. Next load
- * balancing owner will pick it up.
- */
- if (need_resched())
- break;
-
- rebalance_domains(balance_cpu, CPU_IDLE);
-
- rq = cpu_rq(balance_cpu);
- if (time_after(this_rq->next_balance, rq->next_balance))
- this_rq->next_balance = rq->next_balance;
- }
- }
-#endif
-}
-
-static inline int on_null_domain(int cpu)
-{
- return !rcu_dereference(cpu_rq(cpu)->sd);
-}
-
-/*
- * Trigger the SCHED_SOFTIRQ if it is time to do periodic load balancing.
- *
- * In case of CONFIG_NO_HZ, this is the place where we nominate a new
- * idle load balancing owner or decide to stop the periodic load balancing,
- * if the whole system is idle.
- */
-static inline void trigger_load_balance(struct rq *rq, int cpu)
-{
-#ifdef CONFIG_NO_HZ
- /*
- * If we were in the nohz mode recently and busy at the current
- * scheduler tick, then check if we need to nominate new idle
- * load balancer.
- */
- if (rq->in_nohz_recently && !rq->idle_at_tick) {
- rq->in_nohz_recently = 0;
-
- if (atomic_read(&nohz.load_balancer) == cpu) {
- cpumask_clear_cpu(cpu, nohz.cpu_mask);
- atomic_set(&nohz.load_balancer, -1);
- }
-
- if (atomic_read(&nohz.load_balancer) == -1) {
- int ilb = find_new_ilb(cpu);
-
- if (ilb < nr_cpu_ids)
- resched_cpu(ilb);
- }
- }
-
- /*
- * If this cpu is idle and doing idle load balancing for all the
- * cpus with ticks stopped, is it time for that to stop?
- */
- if (rq->idle_at_tick && atomic_read(&nohz.load_balancer) == cpu &&
- cpumask_weight(nohz.cpu_mask) == num_online_cpus()) {
- resched_cpu(cpu);
- return;
- }
-
- /*
- * If this cpu is idle and the idle load balancing is done by
- * someone else, then no need raise the SCHED_SOFTIRQ
- */
- if (rq->idle_at_tick && atomic_read(&nohz.load_balancer) != cpu &&
- cpumask_test_cpu(cpu, nohz.cpu_mask))
- return;
-#endif
- /* Don't need to rebalance while attached to NULL domain */
- if (time_after_eq(jiffies, rq->next_balance) &&
- likely(!on_null_domain(cpu)))
- raise_softirq(SCHED_SOFTIRQ);
-}
-
-#else /* CONFIG_SMP */
-
-/*
- * on UP we do not need to balance between CPUs:
- */
-static inline void idle_balance(int cpu, struct rq *rq)
-{
-}
-
#endif
DEFINE_PER_CPU(struct kernel_stat, kstat);
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 7177860..5116b81 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -1952,6 +1952,1762 @@ move_one_task_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
return 0;
}
+/*
+ * pull_task - move a task from a remote runqueue to the local runqueue.
+ * Both runqueues must be locked.
+ */
+static void pull_task(struct rq *src_rq, struct task_struct *p,
+ struct rq *this_rq, int this_cpu)
+{
+ deactivate_task(src_rq, p, 0);
+ set_task_cpu(p, this_cpu);
+ activate_task(this_rq, p, 0);
+ check_preempt_curr(this_rq, p, 0);
+}
+
+/*
+ * can_migrate_task - may task p from runqueue rq be migrated to this_cpu?
+ */
+static
+int can_migrate_task(struct task_struct *p, struct rq *rq, int this_cpu,
+ struct sched_domain *sd, enum cpu_idle_type idle,
+ int *all_pinned)
+{
+ int tsk_cache_hot = 0;
+ /*
+ * We do not migrate tasks that are:
+ * 1) running (obviously), or
+ * 2) cannot be migrated to this CPU due to cpus_allowed, or
+ * 3) are cache-hot on their current CPU.
+ */
+ if (!cpumask_test_cpu(this_cpu, &p->cpus_allowed)) {
+ schedstat_inc(p, se.nr_failed_migrations_affine);
+ return 0;
+ }
+ *all_pinned = 0;
+
+ if (task_running(rq, p)) {
+ schedstat_inc(p, se.nr_failed_migrations_running);
+ return 0;
+ }
+
+ /*
+ * Aggressive migration if:
+ * 1) task is cache cold, or
+ * 2) too many balance attempts have failed.
+ */
+
+ tsk_cache_hot = task_hot(p, rq->clock, sd);
+ if (!tsk_cache_hot ||
+ sd->nr_balance_failed > sd->cache_nice_tries) {
+#ifdef CONFIG_SCHEDSTATS
+ if (tsk_cache_hot) {
+ schedstat_inc(sd, lb_hot_gained[idle]);
+ schedstat_inc(p, se.nr_forced_migrations);
+ }
+#endif
+ return 1;
+ }
+
+ if (tsk_cache_hot) {
+ schedstat_inc(p, se.nr_failed_migrations_hot);
+ return 0;
+ }
+ return 1;
+}
+
+static unsigned long
+balance_tasks(struct rq *this_rq, int this_cpu, struct rq *busiest,
+ unsigned long max_load_move, struct sched_domain *sd,
+ enum cpu_idle_type idle, int *all_pinned,
+ int *this_best_prio, struct rq_iterator *iterator)
+{
+ int loops = 0, pulled = 0, pinned = 0;
+ struct task_struct *p;
+ long rem_load_move = max_load_move;
+
+ if (max_load_move == 0)
+ goto out;
+
+ pinned = 1;
+
+ /*
+ * Start the load-balancing iterator:
+ */
+ p = iterator->start(iterator->arg);
+next:
+ if (!p || loops++ > sysctl_sched_nr_migrate)
+ goto out;
+
+ if ((p->se.load.weight >> 1) > rem_load_move ||
+ !can_migrate_task(p, busiest, this_cpu, sd, idle, &pinned)) {
+ p = iterator->next(iterator->arg);
+ goto next;
+ }
+
+ pull_task(busiest, p, this_rq, this_cpu);
+ pulled++;
+ rem_load_move -= p->se.load.weight;
+
+#ifdef CONFIG_PREEMPT
+ /*
+ * NEWIDLE balancing is a source of latency, so preemptible kernels
+ * will stop after the first task is pulled to minimize the critical
+ * section.
+ */
+ if (idle == CPU_NEWLY_IDLE)
+ goto out;
+#endif
+
+ /*
+ * We only want to steal up to the prescribed amount of weighted load.
+ */
+ if (rem_load_move > 0) {
+ if (p->prio < *this_best_prio)
+ *this_best_prio = p->prio;
+ p = iterator->next(iterator->arg);
+ goto next;
+ }
+out:
+ /*
+ * Right now, this is one of only two places pull_task() is called,
+ * so we can safely collect pull_task() stats here rather than
+ * inside pull_task().
+ */
+ schedstat_add(sd, lb_gained[idle], pulled);
+
+ if (all_pinned)
+ *all_pinned = pinned;
+
+ return max_load_move - rem_load_move;
+}
+
+/*
+ * move_tasks tries to move up to max_load_move weighted load from busiest to
+ * this_rq, as part of a balancing operation within domain "sd".
+ * Returns 1 if successful and 0 otherwise.
+ *
+ * Called with both runqueues locked.
+ */
+static int move_tasks(struct rq *this_rq, int this_cpu, struct rq *busiest,
+ unsigned long max_load_move,
+ struct sched_domain *sd, enum cpu_idle_type idle,
+ int *all_pinned)
+{
+ const struct sched_class *class = sched_class_highest;
+ unsigned long total_load_moved = 0;
+ int this_best_prio = this_rq->curr->prio;
+
+ do {
+ total_load_moved +=
+ class->load_balance(this_rq, this_cpu, busiest,
+ max_load_move - total_load_moved,
+ sd, idle, all_pinned, &this_best_prio);
+ class = class->next;
+
+#ifdef CONFIG_PREEMPT
+ /*
+ * NEWIDLE balancing is a source of latency, so preemptible
+ * kernels will stop after the first task is pulled to minimize
+ * the critical section.
+ */
+ if (idle == CPU_NEWLY_IDLE && this_rq->nr_running)
+ break;
+#endif
+ } while (class && max_load_move > total_load_moved);
+
+ return total_load_moved > 0;
+}
+
+static int
+iter_move_one_task(struct rq *this_rq, int this_cpu, struct rq *busiest,
+ struct sched_domain *sd, enum cpu_idle_type idle,
+ struct rq_iterator *iterator)
+{
+ struct task_struct *p = iterator->start(iterator->arg);
+ int pinned = 0;
+
+ while (p) {
+ if (can_migrate_task(p, busiest, this_cpu, sd, idle, &pinned)) {
+ pull_task(busiest, p, this_rq, this_cpu);
+ /*
+ * Right now, this is only the second place pull_task()
+ * is called, so we can safely collect pull_task()
+ * stats here rather than inside pull_task().
+ */
+ schedstat_inc(sd, lb_gained[idle]);
+
+ return 1;
+ }
+ p = iterator->next(iterator->arg);
+ }
+
+ return 0;
+}
+
+/*
+ * move_one_task tries to move exactly one task from busiest to this_rq, as
+ * part of active balancing operations within "domain".
+ * Returns 1 if successful and 0 otherwise.
+ *
+ * Called with both runqueues locked.
+ */
+static int move_one_task(struct rq *this_rq, int this_cpu, struct rq *busiest,
+ struct sched_domain *sd, enum cpu_idle_type idle)
+{
+ const struct sched_class *class;
+
+ for_each_class(class) {
+ if (class->move_one_task(this_rq, this_cpu, busiest, sd, idle))
+ return 1;
+ }
+
+ return 0;
+}
+/********** Helpers for find_busiest_group ************************/
+/*
+ * sd_lb_stats - Structure to store the statistics of a sched_domain
+ * during load balancing.
+ */
+struct sd_lb_stats {
+ struct sched_group *busiest; /* Busiest group in this sd */
+ struct sched_group *this; /* Local group in this sd */
+ unsigned long total_load; /* Total load of all groups in sd */
+ unsigned long total_pwr; /* Total power of all groups in sd */
+ unsigned long avg_load; /* Average load across all groups in sd */
+
+ /** Statistics of this group */
+ unsigned long this_load;
+ unsigned long this_load_per_task;
+ unsigned long this_nr_running;
+
+ /* Statistics of the busiest group */
+ unsigned long max_load;
+ unsigned long busiest_load_per_task;
+ unsigned long busiest_nr_running;
+
+ int group_imb; /* Is there imbalance in this sd */
+#if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
+ int power_savings_balance; /* Is powersave balance needed for this sd */
+ struct sched_group *group_min; /* Least loaded group in sd */
+ struct sched_group *group_leader; /* Group which relieves group_min */
+ unsigned long min_load_per_task; /* load_per_task in group_min */
+ unsigned long leader_nr_running; /* Nr running of group_leader */
+ unsigned long min_nr_running; /* Nr running of group_min */
+#endif
+};
+
+/*
+ * sg_lb_stats - stats of a sched_group required for load_balancing
+ */
+struct sg_lb_stats {
+ unsigned long avg_load; /*Avg load across the CPUs of the group */
+ unsigned long group_load; /* Total load over the CPUs of the group */
+ unsigned long sum_nr_running; /* Nr tasks running in the group */
+ unsigned long sum_weighted_load; /* Weighted load of group's tasks */
+ unsigned long group_capacity;
+ int group_imb; /* Is there an imbalance in the group ? */
+};
+
+/**
+ * group_first_cpu - Returns the first cpu in the cpumask of a sched_group.
+ * @group: The group whose first cpu is to be returned.
+ */
+static inline unsigned int group_first_cpu(struct sched_group *group)
+{
+ return cpumask_first(sched_group_cpus(group));
+}
+
+/**
+ * get_sd_load_idx - Obtain the load index for a given sched domain.
+ * @sd: The sched_domain whose load_idx is to be obtained.
+ * @idle: The Idle status of the CPU for whose sd load_icx is obtained.
+ */
+static inline int get_sd_load_idx(struct sched_domain *sd,
+ enum cpu_idle_type idle)
+{
+ int load_idx;
+
+ switch (idle) {
+ case CPU_NOT_IDLE:
+ load_idx = sd->busy_idx;
+ break;
+
+ case CPU_NEWLY_IDLE:
+ load_idx = sd->newidle_idx;
+ break;
+ default:
+ load_idx = sd->idle_idx;
+ break;
+ }
+
+ return load_idx;
+}
+
+
+#if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
+/**
+ * init_sd_power_savings_stats - Initialize power savings statistics for
+ * the given sched_domain, during load balancing.
+ *
+ * @sd: Sched domain whose power-savings statistics are to be initialized.
+ * @sds: Variable containing the statistics for sd.
+ * @idle: Idle status of the CPU at which we're performing load-balancing.
+ */
+static inline void init_sd_power_savings_stats(struct sched_domain *sd,
+ struct sd_lb_stats *sds, enum cpu_idle_type idle)
+{
+ /*
+ * Busy processors will not participate in power savings
+ * balance.
+ */
+ if (idle == CPU_NOT_IDLE || !(sd->flags & SD_POWERSAVINGS_BALANCE))
+ sds->power_savings_balance = 0;
+ else {
+ sds->power_savings_balance = 1;
+ sds->min_nr_running = ULONG_MAX;
+ sds->leader_nr_running = 0;
+ }
+}
+
+/**
+ * update_sd_power_savings_stats - Update the power saving stats for a
+ * sched_domain while performing load balancing.
+ *
+ * @group: sched_group belonging to the sched_domain under consideration.
+ * @sds: Variable containing the statistics of the sched_domain
+ * @local_group: Does group contain the CPU for which we're performing
+ * load balancing ?
+ * @sgs: Variable containing the statistics of the group.
+ */
+static inline void update_sd_power_savings_stats(struct sched_group *group,
+ struct sd_lb_stats *sds, int local_group, struct sg_lb_stats *sgs)
+{
+
+ if (!sds->power_savings_balance)
+ return;
+
+ /*
+ * If the local group is idle or completely loaded
+ * no need to do power savings balance at this domain
+ */
+ if (local_group && (sds->this_nr_running >= sgs->group_capacity ||
+ !sds->this_nr_running))
+ sds->power_savings_balance = 0;
+
+ /*
+ * If a group is already running at full capacity or idle,
+ * don't include that group in power savings calculations
+ */
+ if (!sds->power_savings_balance ||
+ sgs->sum_nr_running >= sgs->group_capacity ||
+ !sgs->sum_nr_running)
+ return;
+
+ /*
+ * Calculate the group which has the least non-idle load.
+ * This is the group from where we need to pick up the load
+ * for saving power
+ */
+ if ((sgs->sum_nr_running < sds->min_nr_running) ||
+ (sgs->sum_nr_running == sds->min_nr_running &&
+ group_first_cpu(group) > group_first_cpu(sds->group_min))) {
+ sds->group_min = group;
+ sds->min_nr_running = sgs->sum_nr_running;
+ sds->min_load_per_task = sgs->sum_weighted_load /
+ sgs->sum_nr_running;
+ }
+
+ /*
+ * Calculate the group which is almost near its
+ * capacity but still has some space to pick up some load
+ * from other group and save more power
+ */
+ if (sgs->sum_nr_running + 1 > sgs->group_capacity)
+ return;
+
+ if (sgs->sum_nr_running > sds->leader_nr_running ||
+ (sgs->sum_nr_running == sds->leader_nr_running &&
+ group_first_cpu(group) < group_first_cpu(sds->group_leader))) {
+ sds->group_leader = group;
+ sds->leader_nr_running = sgs->sum_nr_running;
+ }
+}
+
+/**
+ * check_power_save_busiest_group - see if there is potential for some power-savings balance
+ * @sds: Variable containing the statistics of the sched_domain
+ * under consideration.
+ * @this_cpu: Cpu at which we're currently performing load-balancing.
+ * @imbalance: Variable to store the imbalance.
+ *
+ * Description:
+ * Check if we have potential to perform some power-savings balance.
+ * If yes, set the busiest group to be the least loaded group in the
+ * sched_domain, so that it's CPUs can be put to idle.
+ *
+ * Returns 1 if there is potential to perform power-savings balance.
+ * Else returns 0.
+ */
+static inline int check_power_save_busiest_group(struct sd_lb_stats *sds,
+ int this_cpu, unsigned long *imbalance)
+{
+ if (!sds->power_savings_balance)
+ return 0;
+
+ if (sds->this != sds->group_leader ||
+ sds->group_leader == sds->group_min)
+ return 0;
+
+ *imbalance = sds->min_load_per_task;
+ sds->busiest = sds->group_min;
+
+ return 1;
+
+}
+#else /* CONFIG_SCHED_MC || CONFIG_SCHED_SMT */
+static inline void init_sd_power_savings_stats(struct sched_domain *sd,
+ struct sd_lb_stats *sds, enum cpu_idle_type idle)
+{
+ return;
+}
+
+static inline void update_sd_power_savings_stats(struct sched_group *group,
+ struct sd_lb_stats *sds, int local_group, struct sg_lb_stats *sgs)
+{
+ return;
+}
+
+static inline int check_power_save_busiest_group(struct sd_lb_stats *sds,
+ int this_cpu, unsigned long *imbalance)
+{
+ return 0;
+}
+#endif /* CONFIG_SCHED_MC || CONFIG_SCHED_SMT */
+
+
+unsigned long default_scale_freq_power(struct sched_domain *sd, int cpu)
+{
+ return SCHED_LOAD_SCALE;
+}
+
+unsigned long __weak arch_scale_freq_power(struct sched_domain *sd, int cpu)
+{
+ return default_scale_freq_power(sd, cpu);
+}
+
+unsigned long default_scale_smt_power(struct sched_domain *sd, int cpu)
+{
+ unsigned long weight = cpumask_weight(sched_domain_span(sd));
+ unsigned long smt_gain = sd->smt_gain;
+
+ smt_gain /= weight;
+
+ return smt_gain;
+}
+
+unsigned long __weak arch_scale_smt_power(struct sched_domain *sd, int cpu)
+{
+ return default_scale_smt_power(sd, cpu);
+}
+
+unsigned long scale_rt_power(int cpu)
+{
+ struct rq *rq = cpu_rq(cpu);
+ u64 total, available;
+
+ sched_avg_update(rq);
+
+ total = sched_avg_period() + (rq->clock - rq->age_stamp);
+ available = total - rq->rt_avg;
+
+ if (unlikely((s64)total < SCHED_LOAD_SCALE))
+ total = SCHED_LOAD_SCALE;
+
+ total >>= SCHED_LOAD_SHIFT;
+
+ return div_u64(available, total);
+}
+
+static void update_cpu_power(struct sched_domain *sd, int cpu)
+{
+ unsigned long weight = cpumask_weight(sched_domain_span(sd));
+ unsigned long power = SCHED_LOAD_SCALE;
+ struct sched_group *sdg = sd->groups;
+
+ if (sched_feat(ARCH_POWER))
+ power *= arch_scale_freq_power(sd, cpu);
+ else
+ power *= default_scale_freq_power(sd, cpu);
+
+ power >>= SCHED_LOAD_SHIFT;
+
+ if ((sd->flags & SD_SHARE_CPUPOWER) && weight > 1) {
+ if (sched_feat(ARCH_POWER))
+ power *= arch_scale_smt_power(sd, cpu);
+ else
+ power *= default_scale_smt_power(sd, cpu);
+
+ power >>= SCHED_LOAD_SHIFT;
+ }
+
+ power *= scale_rt_power(cpu);
+ power >>= SCHED_LOAD_SHIFT;
+
+ if (!power)
+ power = 1;
+
+ sdg->cpu_power = power;
+}
+
+static void update_group_power(struct sched_domain *sd, int cpu)
+{
+ struct sched_domain *child = sd->child;
+ struct sched_group *group, *sdg = sd->groups;
+ unsigned long power;
+
+ if (!child) {
+ update_cpu_power(sd, cpu);
+ return;
+ }
+
+ power = 0;
+
+ group = child->groups;
+ do {
+ power += group->cpu_power;
+ group = group->next;
+ } while (group != child->groups);
+
+ sdg->cpu_power = power;
+}
+
+/**
+ * update_sg_lb_stats - Update sched_group's statistics for load balancing.
+ * @sd: The sched_domain whose statistics are to be updated.
+ * @group: sched_group whose statistics are to be updated.
+ * @this_cpu: Cpu for which load balance is currently performed.
+ * @idle: Idle status of this_cpu
+ * @load_idx: Load index of sched_domain of this_cpu for load calc.
+ * @sd_idle: Idle status of the sched_domain containing group.
+ * @local_group: Does group contain this_cpu.
+ * @cpus: Set of cpus considered for load balancing.
+ * @balance: Should we balance.
+ * @sgs: variable to hold the statistics for this group.
+ */
+static inline void update_sg_lb_stats(struct sched_domain *sd,
+ struct sched_group *group, int this_cpu,
+ enum cpu_idle_type idle, int load_idx, int *sd_idle,
+ int local_group, const struct cpumask *cpus,
+ int *balance, struct sg_lb_stats *sgs)
+{
+ unsigned long load, max_cpu_load, min_cpu_load;
+ int i;
+ unsigned int balance_cpu = -1, first_idle_cpu = 0;
+ unsigned long sum_avg_load_per_task;
+ unsigned long avg_load_per_task;
+
+ if (local_group) {
+ balance_cpu = group_first_cpu(group);
+ if (balance_cpu == this_cpu)
+ update_group_power(sd, this_cpu);
+ }
+
+ /* Tally up the load of all CPUs in the group */
+ sum_avg_load_per_task = avg_load_per_task = 0;
+ max_cpu_load = 0;
+ min_cpu_load = ~0UL;
+
+ for_each_cpu_and(i, sched_group_cpus(group), cpus) {
+ struct rq *rq = cpu_rq(i);
+
+ if (*sd_idle && rq->nr_running)
+ *sd_idle = 0;
+
+ /* Bias balancing toward cpus of our domain */
+ if (local_group) {
+ if (idle_cpu(i) && !first_idle_cpu) {
+ first_idle_cpu = 1;
+ balance_cpu = i;
+ }
+
+ load = target_load(i, load_idx);
+ } else {
+ load = source_load(i, load_idx);
+ if (load > max_cpu_load)
+ max_cpu_load = load;
+ if (min_cpu_load > load)
+ min_cpu_load = load;
+ }
+
+ sgs->group_load += load;
+ sgs->sum_nr_running += rq->nr_running;
+ sgs->sum_weighted_load += weighted_cpuload(i);
+
+ sum_avg_load_per_task += cpu_avg_load_per_task(i);
+ }
+
+ /*
+ * First idle cpu or the first cpu(busiest) in this sched group
+ * is eligible for doing load balancing at this and above
+ * domains. In the newly idle case, we will allow all the cpu's
+ * to do the newly idle load balance.
+ */
+ if (idle != CPU_NEWLY_IDLE && local_group &&
+ balance_cpu != this_cpu && balance) {
+ *balance = 0;
+ return;
+ }
+
+ /* Adjust by relative CPU power of the group */
+ sgs->avg_load = (sgs->group_load * SCHED_LOAD_SCALE) / group->cpu_power;
+
+
+ /*
+ * Consider the group unbalanced when the imbalance is larger
+ * than the average weight of two tasks.
+ *
+ * APZ: with cgroup the avg task weight can vary wildly and
+ * might not be a suitable number - should we keep a
+ * normalized nr_running number somewhere that negates
+ * the hierarchy?
+ */
+ avg_load_per_task = (sum_avg_load_per_task * SCHED_LOAD_SCALE) /
+ group->cpu_power;
+
+ if ((max_cpu_load - min_cpu_load) > 2*avg_load_per_task)
+ sgs->group_imb = 1;
+
+ sgs->group_capacity =
+ DIV_ROUND_CLOSEST(group->cpu_power, SCHED_LOAD_SCALE);
+}
+
+/**
+ * update_sd_lb_stats - Update sched_group's statistics for load balancing.
+ * @sd: sched_domain whose statistics are to be updated.
+ * @this_cpu: Cpu for which load balance is currently performed.
+ * @idle: Idle status of this_cpu
+ * @sd_idle: Idle status of the sched_domain containing group.
+ * @cpus: Set of cpus considered for load balancing.
+ * @balance: Should we balance.
+ * @sds: variable to hold the statistics for this sched_domain.
+ */
+static inline void update_sd_lb_stats(struct sched_domain *sd, int this_cpu,
+ enum cpu_idle_type idle, int *sd_idle,
+ const struct cpumask *cpus, int *balance,
+ struct sd_lb_stats *sds)
+{
+ struct sched_domain *child = sd->child;
+ struct sched_group *group = sd->groups;
+ struct sg_lb_stats sgs;
+ int load_idx, prefer_sibling = 0;
+
+ if (child && child->flags & SD_PREFER_SIBLING)
+ prefer_sibling = 1;
+
+ init_sd_power_savings_stats(sd, sds, idle);
+ load_idx = get_sd_load_idx(sd, idle);
+
+ do {
+ int local_group;
+
+ local_group = cpumask_test_cpu(this_cpu,
+ sched_group_cpus(group));
+ memset(&sgs, 0, sizeof(sgs));
+ update_sg_lb_stats(sd, group, this_cpu, idle, load_idx, sd_idle,
+ local_group, cpus, balance, &sgs);
+
+ if (local_group && balance && !(*balance))
+ return;
+
+ sds->total_load += sgs.group_load;
+ sds->total_pwr += group->cpu_power;
+
+ /*
+ * In case the child domain prefers tasks go to siblings
+ * first, lower the group capacity to one so that we'll try
+ * and move all the excess tasks away.
+ */
+ if (prefer_sibling)
+ sgs.group_capacity = min(sgs.group_capacity, 1UL);
+
+ if (local_group) {
+ sds->this_load = sgs.avg_load;
+ sds->this = group;
+ sds->this_nr_running = sgs.sum_nr_running;
+ sds->this_load_per_task = sgs.sum_weighted_load;
+ } else if (sgs.avg_load > sds->max_load &&
+ (sgs.sum_nr_running > sgs.group_capacity ||
+ sgs.group_imb)) {
+ sds->max_load = sgs.avg_load;
+ sds->busiest = group;
+ sds->busiest_nr_running = sgs.sum_nr_running;
+ sds->busiest_load_per_task = sgs.sum_weighted_load;
+ sds->group_imb = sgs.group_imb;
+ }
+
+ update_sd_power_savings_stats(group, sds, local_group, &sgs);
+ group = group->next;
+ } while (group != sd->groups);
+}
+
+/**
+ * fix_small_imbalance - Calculate the minor imbalance that exists
+ * amongst the groups of a sched_domain, during
+ * load balancing.
+ * @sds: Statistics of the sched_domain whose imbalance is to be calculated.
+ * @this_cpu: The cpu at whose sched_domain we're performing load-balance.
+ * @imbalance: Variable to store the imbalance.
+ */
+static inline void fix_small_imbalance(struct sd_lb_stats *sds,
+ int this_cpu, unsigned long *imbalance)
+{
+ unsigned long tmp, pwr_now = 0, pwr_move = 0;
+ unsigned int imbn = 2;
+
+ if (sds->this_nr_running) {
+ sds->this_load_per_task /= sds->this_nr_running;
+ if (sds->busiest_load_per_task >
+ sds->this_load_per_task)
+ imbn = 1;
+ } else
+ sds->this_load_per_task =
+ cpu_avg_load_per_task(this_cpu);
+
+ if (sds->max_load - sds->this_load + sds->busiest_load_per_task >=
+ sds->busiest_load_per_task * imbn) {
+ *imbalance = sds->busiest_load_per_task;
+ return;
+ }
+
+ /*
+ * OK, we don't have enough imbalance to justify moving tasks,
+ * however we may be able to increase total CPU power used by
+ * moving them.
+ */
+
+ pwr_now += sds->busiest->cpu_power *
+ min(sds->busiest_load_per_task, sds->max_load);
+ pwr_now += sds->this->cpu_power *
+ min(sds->this_load_per_task, sds->this_load);
+ pwr_now /= SCHED_LOAD_SCALE;
+
+ /* Amount of load we'd subtract */
+ tmp = (sds->busiest_load_per_task * SCHED_LOAD_SCALE) /
+ sds->busiest->cpu_power;
+ if (sds->max_load > tmp)
+ pwr_move += sds->busiest->cpu_power *
+ min(sds->busiest_load_per_task, sds->max_load - tmp);
+
+ /* Amount of load we'd add */
+ if (sds->max_load * sds->busiest->cpu_power <
+ sds->busiest_load_per_task * SCHED_LOAD_SCALE)
+ tmp = (sds->max_load * sds->busiest->cpu_power) /
+ sds->this->cpu_power;
+ else
+ tmp = (sds->busiest_load_per_task * SCHED_LOAD_SCALE) /
+ sds->this->cpu_power;
+ pwr_move += sds->this->cpu_power *
+ min(sds->this_load_per_task, sds->this_load + tmp);
+ pwr_move /= SCHED_LOAD_SCALE;
+
+ /* Move if we gain throughput */
+ if (pwr_move > pwr_now)
+ *imbalance = sds->busiest_load_per_task;
+}
+
+/**
+ * calculate_imbalance - Calculate the amount of imbalance present within the
+ * groups of a given sched_domain during load balance.
+ * @sds: statistics of the sched_domain whose imbalance is to be calculated.
+ * @this_cpu: Cpu for which currently load balance is being performed.
+ * @imbalance: The variable to store the imbalance.
+ */
+static inline void calculate_imbalance(struct sd_lb_stats *sds, int this_cpu,
+ unsigned long *imbalance)
+{
+ unsigned long max_pull;
+ /*
+ * In the presence of smp nice balancing, certain scenarios can have
+ * max load less than avg load(as we skip the groups at or below
+ * its cpu_power, while calculating max_load..)
+ */
+ if (sds->max_load < sds->avg_load) {
+ *imbalance = 0;
+ return fix_small_imbalance(sds, this_cpu, imbalance);
+ }
+
+ /* Don't want to pull so many tasks that a group would go idle */
+ max_pull = min(sds->max_load - sds->avg_load,
+ sds->max_load - sds->busiest_load_per_task);
+
+ /* How much load to actually move to equalise the imbalance */
+ *imbalance = min(max_pull * sds->busiest->cpu_power,
+ (sds->avg_load - sds->this_load) * sds->this->cpu_power)
+ / SCHED_LOAD_SCALE;
+
+ /*
+ * if *imbalance is less than the average load per runnable task
+ * there is no gaurantee that any tasks will be moved so we'll have
+ * a think about bumping its value to force at least one task to be
+ * moved
+ */
+ if (*imbalance < sds->busiest_load_per_task)
+ return fix_small_imbalance(sds, this_cpu, imbalance);
+
+}
+/******* find_busiest_group() helpers end here *********************/
+
+/**
+ * find_busiest_group - Returns the busiest group within the sched_domain
+ * if there is an imbalance. If there isn't an imbalance, and
+ * the user has opted for power-savings, it returns a group whose
+ * CPUs can be put to idle by rebalancing those tasks elsewhere, if
+ * such a group exists.
+ *
+ * Also calculates the amount of weighted load which should be moved
+ * to restore balance.
+ *
+ * @sd: The sched_domain whose busiest group is to be returned.
+ * @this_cpu: The cpu for which load balancing is currently being performed.
+ * @imbalance: Variable which stores amount of weighted load which should
+ * be moved to restore balance/put a group to idle.
+ * @idle: The idle status of this_cpu.
+ * @sd_idle: The idleness of sd
+ * @cpus: The set of CPUs under consideration for load-balancing.
+ * @balance: Pointer to a variable indicating if this_cpu
+ * is the appropriate cpu to perform load balancing at this_level.
+ *
+ * Returns: - the busiest group if imbalance exists.
+ * - If no imbalance and user has opted for power-savings balance,
+ * return the least loaded group whose CPUs can be
+ * put to idle by rebalancing its tasks onto our group.
+ */
+static struct sched_group *
+find_busiest_group(struct sched_domain *sd, int this_cpu,
+ unsigned long *imbalance, enum cpu_idle_type idle,
+ int *sd_idle, const struct cpumask *cpus, int *balance)
+{
+ struct sd_lb_stats sds;
+
+ memset(&sds, 0, sizeof(sds));
+
+ /*
+ * Compute the various statistics relavent for load balancing at
+ * this level.
+ */
+ update_sd_lb_stats(sd, this_cpu, idle, sd_idle, cpus,
+ balance, &sds);
+
+ /* Cases where imbalance does not exist from POV of this_cpu */
+ /* 1) this_cpu is not the appropriate cpu to perform load balancing
+ * at this level.
+ * 2) There is no busy sibling group to pull from.
+ * 3) This group is the busiest group.
+ * 4) This group is more busy than the avg busieness at this
+ * sched_domain.
+ * 5) The imbalance is within the specified limit.
+ * 6) Any rebalance would lead to ping-pong
+ */
+ if (balance && !(*balance))
+ goto ret;
+
+ if (!sds.busiest || sds.busiest_nr_running == 0)
+ goto out_balanced;
+
+ if (sds.this_load >= sds.max_load)
+ goto out_balanced;
+
+ sds.avg_load = (SCHED_LOAD_SCALE * sds.total_load) / sds.total_pwr;
+
+ if (sds.this_load >= sds.avg_load)
+ goto out_balanced;
+
+ if (100 * sds.max_load <= sd->imbalance_pct * sds.this_load)
+ goto out_balanced;
+
+ sds.busiest_load_per_task /= sds.busiest_nr_running;
+ if (sds.group_imb)
+ sds.busiest_load_per_task =
+ min(sds.busiest_load_per_task, sds.avg_load);
+
+ /*
+ * We're trying to get all the cpus to the average_load, so we don't
+ * want to push ourselves above the average load, nor do we wish to
+ * reduce the max loaded cpu below the average load, as either of these
+ * actions would just result in more rebalancing later, and ping-pong
+ * tasks around. Thus we look for the minimum possible imbalance.
+ * Negative imbalances (*we* are more loaded than anyone else) will
+ * be counted as no imbalance for these purposes -- we can't fix that
+ * by pulling tasks to us. Be careful of negative numbers as they'll
+ * appear as very large values with unsigned longs.
+ */
+ if (sds.max_load <= sds.busiest_load_per_task)
+ goto out_balanced;
+
+ /* Looks like there is an imbalance. Compute it */
+ calculate_imbalance(&sds, this_cpu, imbalance);
+ return sds.busiest;
+
+out_balanced:
+ /*
+ * There is no obvious imbalance. But check if we can do some balancing
+ * to save power.
+ */
+ if (check_power_save_busiest_group(&sds, this_cpu, imbalance))
+ return sds.busiest;
+ret:
+ *imbalance = 0;
+ return NULL;
+}
+
+/*
+ * find_busiest_queue - find the busiest runqueue among the cpus in group.
+ */
+static struct rq *
+find_busiest_queue(struct sched_group *group, enum cpu_idle_type idle,
+ unsigned long imbalance, const struct cpumask *cpus)
+{
+ struct rq *busiest = NULL, *rq;
+ unsigned long max_load = 0;
+ int i;
+
+ for_each_cpu(i, sched_group_cpus(group)) {
+ unsigned long power = power_of(i);
+ unsigned long capacity = DIV_ROUND_CLOSEST(power, SCHED_LOAD_SCALE);
+ unsigned long wl;
+
+ if (!cpumask_test_cpu(i, cpus))
+ continue;
+
+ rq = cpu_rq(i);
+ wl = weighted_cpuload(i) * SCHED_LOAD_SCALE;
+ wl /= power;
+
+ if (capacity && rq->nr_running == 1 && wl > imbalance)
+ continue;
+
+ if (wl > max_load) {
+ max_load = wl;
+ busiest = rq;
+ }
+ }
+
+ return busiest;
+}
+
+/*
+ * Max backoff if we encounter pinned tasks. Pretty arbitrary value, but
+ * so long as it is large enough.
+ */
+#define MAX_PINNED_INTERVAL 512
+
+/* Working cpumask for load_balance and load_balance_newidle. */
+static DEFINE_PER_CPU(cpumask_var_t, load_balance_tmpmask);
+
+/*
+ * Check this_cpu to ensure it is balanced within domain. Attempt to move
+ * tasks if there is an imbalance.
+ */
+static int load_balance(int this_cpu, struct rq *this_rq,
+ struct sched_domain *sd, enum cpu_idle_type idle,
+ int *balance)
+{
+ int ld_moved, all_pinned = 0, active_balance = 0, sd_idle = 0;
+ struct sched_group *group;
+ unsigned long imbalance;
+ struct rq *busiest;
+ unsigned long flags;
+ struct cpumask *cpus = __get_cpu_var(load_balance_tmpmask);
+
+ cpumask_copy(cpus, cpu_active_mask);
+
+ /*
+ * When power savings policy is enabled for the parent domain, idle
+ * sibling can pick up load irrespective of busy siblings. In this case,
+ * let the state of idle sibling percolate up as CPU_IDLE, instead of
+ * portraying it as CPU_NOT_IDLE.
+ */
+ if (idle != CPU_NOT_IDLE && sd->flags & SD_SHARE_CPUPOWER &&
+ !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE))
+ sd_idle = 1;
+
+ schedstat_inc(sd, lb_count[idle]);
+
+redo:
+ update_shares(sd);
+ group = find_busiest_group(sd, this_cpu, &imbalance, idle, &sd_idle,
+ cpus, balance);
+
+ if (*balance == 0)
+ goto out_balanced;
+
+ if (!group) {
+ schedstat_inc(sd, lb_nobusyg[idle]);
+ goto out_balanced;
+ }
+
+ busiest = find_busiest_queue(group, idle, imbalance, cpus);
+ if (!busiest) {
+ schedstat_inc(sd, lb_nobusyq[idle]);
+ goto out_balanced;
+ }
+
+ BUG_ON(busiest == this_rq);
+
+ schedstat_add(sd, lb_imbalance[idle], imbalance);
+
+ ld_moved = 0;
+ if (busiest->nr_running > 1) {
+ /*
+ * Attempt to move tasks. If find_busiest_group has found
+ * an imbalance but busiest->nr_running <= 1, the group is
+ * still unbalanced. ld_moved simply stays zero, so it is
+ * correctly treated as an imbalance.
+ */
+ local_irq_save(flags);
+ double_rq_lock(this_rq, busiest);
+ ld_moved = move_tasks(this_rq, this_cpu, busiest,
+ imbalance, sd, idle, &all_pinned);
+ double_rq_unlock(this_rq, busiest);
+ local_irq_restore(flags);
+
+ /*
+ * some other cpu did the load balance for us.
+ */
+ if (ld_moved && this_cpu != smp_processor_id())
+ resched_cpu(this_cpu);
+
+ /* All tasks on this runqueue were pinned by CPU affinity */
+ if (unlikely(all_pinned)) {
+ cpumask_clear_cpu(cpu_of(busiest), cpus);
+ if (!cpumask_empty(cpus))
+ goto redo;
+ goto out_balanced;
+ }
+ }
+
+ if (!ld_moved) {
+ schedstat_inc(sd, lb_failed[idle]);
+ sd->nr_balance_failed++;
+
+ if (unlikely(sd->nr_balance_failed > sd->cache_nice_tries+2)) {
+
+ raw_spin_lock_irqsave(&busiest->lock, flags);
+
+ /* don't kick the migration_thread, if the curr
+ * task on busiest cpu can't be moved to this_cpu
+ */
+ if (!cpumask_test_cpu(this_cpu,
+ &busiest->curr->cpus_allowed)) {
+ raw_spin_unlock_irqrestore(&busiest->lock,
+ flags);
+ all_pinned = 1;
+ goto out_one_pinned;
+ }
+
+ if (!busiest->active_balance) {
+ busiest->active_balance = 1;
+ busiest->push_cpu = this_cpu;
+ active_balance = 1;
+ }
+ raw_spin_unlock_irqrestore(&busiest->lock, flags);
+ if (active_balance)
+ wake_up_process(busiest->migration_thread);
+
+ /*
+ * We've kicked active balancing, reset the failure
+ * counter.
+ */
+ sd->nr_balance_failed = sd->cache_nice_tries+1;
+ }
+ } else
+ sd->nr_balance_failed = 0;
+
+ if (likely(!active_balance)) {
+ /* We were unbalanced, so reset the balancing interval */
+ sd->balance_interval = sd->min_interval;
+ } else {
+ /*
+ * If we've begun active balancing, start to back off. This
+ * case may not be covered by the all_pinned logic if there
+ * is only 1 task on the busy runqueue (because we don't call
+ * move_tasks).
+ */
+ if (sd->balance_interval < sd->max_interval)
+ sd->balance_interval *= 2;
+ }
+
+ if (!ld_moved && !sd_idle && sd->flags & SD_SHARE_CPUPOWER &&
+ !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE))
+ ld_moved = -1;
+
+ goto out;
+
+out_balanced:
+ schedstat_inc(sd, lb_balanced[idle]);
+
+ sd->nr_balance_failed = 0;
+
+out_one_pinned:
+ /* tune up the balancing interval */
+ if ((all_pinned && sd->balance_interval < MAX_PINNED_INTERVAL) ||
+ (sd->balance_interval < sd->max_interval))
+ sd->balance_interval *= 2;
+
+ if (!sd_idle && sd->flags & SD_SHARE_CPUPOWER &&
+ !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE))
+ ld_moved = -1;
+ else
+ ld_moved = 0;
+out:
+ if (ld_moved)
+ update_shares(sd);
+ return ld_moved;
+}
+
+/*
+ * Check this_cpu to ensure it is balanced within domain. Attempt to move
+ * tasks if there is an imbalance.
+ *
+ * Called from schedule when this_rq is about to become idle (CPU_NEWLY_IDLE).
+ * this_rq is locked.
+ */
+static int
+load_balance_newidle(int this_cpu, struct rq *this_rq, struct sched_domain *sd)
+{
+ struct sched_group *group;
+ struct rq *busiest = NULL;
+ unsigned long imbalance;
+ int ld_moved = 0;
+ int sd_idle = 0;
+ int all_pinned = 0;
+ struct cpumask *cpus = __get_cpu_var(load_balance_tmpmask);
+
+ cpumask_copy(cpus, cpu_active_mask);
+
+ /*
+ * When power savings policy is enabled for the parent domain, idle
+ * sibling can pick up load irrespective of busy siblings. In this case,
+ * let the state of idle sibling percolate up as IDLE, instead of
+ * portraying it as CPU_NOT_IDLE.
+ */
+ if (sd->flags & SD_SHARE_CPUPOWER &&
+ !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE))
+ sd_idle = 1;
+
+ schedstat_inc(sd, lb_count[CPU_NEWLY_IDLE]);
+redo:
+ update_shares_locked(this_rq, sd);
+ group = find_busiest_group(sd, this_cpu, &imbalance, CPU_NEWLY_IDLE,
+ &sd_idle, cpus, NULL);
+ if (!group) {
+ schedstat_inc(sd, lb_nobusyg[CPU_NEWLY_IDLE]);
+ goto out_balanced;
+ }
+
+ busiest = find_busiest_queue(group, CPU_NEWLY_IDLE, imbalance, cpus);
+ if (!busiest) {
+ schedstat_inc(sd, lb_nobusyq[CPU_NEWLY_IDLE]);
+ goto out_balanced;
+ }
+
+ BUG_ON(busiest == this_rq);
+
+ schedstat_add(sd, lb_imbalance[CPU_NEWLY_IDLE], imbalance);
+
+ ld_moved = 0;
+ if (busiest->nr_running > 1) {
+ /* Attempt to move tasks */
+ double_lock_balance(this_rq, busiest);
+ /* this_rq->clock is already updated */
+ update_rq_clock(busiest);
+ ld_moved = move_tasks(this_rq, this_cpu, busiest,
+ imbalance, sd, CPU_NEWLY_IDLE,
+ &all_pinned);
+ double_unlock_balance(this_rq, busiest);
+
+ if (unlikely(all_pinned)) {
+ cpumask_clear_cpu(cpu_of(busiest), cpus);
+ if (!cpumask_empty(cpus))
+ goto redo;
+ }
+ }
+
+ if (!ld_moved) {
+ int active_balance = 0;
+
+ schedstat_inc(sd, lb_failed[CPU_NEWLY_IDLE]);
+ if (!sd_idle && sd->flags & SD_SHARE_CPUPOWER &&
+ !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE))
+ return -1;
+
+ if (sched_mc_power_savings < POWERSAVINGS_BALANCE_WAKEUP)
+ return -1;
+
+ if (sd->nr_balance_failed++ < 2)
+ return -1;
+
+ /*
+ * The only task running in a non-idle cpu can be moved to this
+ * cpu in an attempt to completely freeup the other CPU
+ * package. The same method used to move task in load_balance()
+ * have been extended for load_balance_newidle() to speedup
+ * consolidation at sched_mc=POWERSAVINGS_BALANCE_WAKEUP (2)
+ *
+ * The package power saving logic comes from
+ * find_busiest_group(). If there are no imbalance, then
+ * f_b_g() will return NULL. However when sched_mc={1,2} then
+ * f_b_g() will select a group from which a running task may be
+ * pulled to this cpu in order to make the other package idle.
+ * If there is no opportunity to make a package idle and if
+ * there are no imbalance, then f_b_g() will return NULL and no
+ * action will be taken in load_balance_newidle().
+ *
+ * Under normal task pull operation due to imbalance, there
+ * will be more than one task in the source run queue and
+ * move_tasks() will succeed. ld_moved will be true and this
+ * active balance code will not be triggered.
+ */
+
+ /* Lock busiest in correct order while this_rq is held */
+ double_lock_balance(this_rq, busiest);
+
+ /*
+ * don't kick the migration_thread, if the curr
+ * task on busiest cpu can't be moved to this_cpu
+ */
+ if (!cpumask_test_cpu(this_cpu, &busiest->curr->cpus_allowed)) {
+ double_unlock_balance(this_rq, busiest);
+ all_pinned = 1;
+ return ld_moved;
+ }
+
+ if (!busiest->active_balance) {
+ busiest->active_balance = 1;
+ busiest->push_cpu = this_cpu;
+ active_balance = 1;
+ }
+
+ double_unlock_balance(this_rq, busiest);
+ /*
+ * Should not call ttwu while holding a rq->lock
+ */
+ raw_spin_unlock(&this_rq->lock);
+ if (active_balance)
+ wake_up_process(busiest->migration_thread);
+ raw_spin_lock(&this_rq->lock);
+
+ } else
+ sd->nr_balance_failed = 0;
+
+ update_shares_locked(this_rq, sd);
+ return ld_moved;
+
+out_balanced:
+ schedstat_inc(sd, lb_balanced[CPU_NEWLY_IDLE]);
+ if (!sd_idle && sd->flags & SD_SHARE_CPUPOWER &&
+ !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE))
+ return -1;
+ sd->nr_balance_failed = 0;
+
+ return 0;
+}
+
+/*
+ * idle_balance is called by schedule() if this_cpu is about to become
+ * idle. Attempts to pull tasks from other CPUs.
+ */
+static void idle_balance(int this_cpu, struct rq *this_rq)
+{
+ struct sched_domain *sd;
+ int pulled_task = 0;
+ unsigned long next_balance = jiffies + HZ;
+
+ this_rq->idle_stamp = this_rq->clock;
+
+ if (this_rq->avg_idle < sysctl_sched_migration_cost)
+ return;
+
+ for_each_domain(this_cpu, sd) {
+ unsigned long interval;
+
+ if (!(sd->flags & SD_LOAD_BALANCE))
+ continue;
+
+ if (sd->flags & SD_BALANCE_NEWIDLE)
+ /* If we've pulled tasks over stop searching: */
+ pulled_task = load_balance_newidle(this_cpu, this_rq,
+ sd);
+
+ interval = msecs_to_jiffies(sd->balance_interval);
+ if (time_after(next_balance, sd->last_balance + interval))
+ next_balance = sd->last_balance + interval;
+ if (pulled_task) {
+ this_rq->idle_stamp = 0;
+ break;
+ }
+ }
+ if (pulled_task || time_after(jiffies, this_rq->next_balance)) {
+ /*
+ * We are going idle. next_balance may be set based on
+ * a busy processor. So reset next_balance.
+ */
+ this_rq->next_balance = next_balance;
+ }
+}
+
+/*
+ * active_load_balance is run by migration threads. It pushes running tasks
+ * off the busiest CPU onto idle CPUs. It requires at least 1 task to be
+ * running on each physical CPU where possible, and avoids physical /
+ * logical imbalances.
+ *
+ * Called with busiest_rq locked.
+ */
+static void active_load_balance(struct rq *busiest_rq, int busiest_cpu)
+{
+ int target_cpu = busiest_rq->push_cpu;
+ struct sched_domain *sd;
+ struct rq *target_rq;
+
+ /* Is there any task to move? */
+ if (busiest_rq->nr_running <= 1)
+ return;
+
+ target_rq = cpu_rq(target_cpu);
+
+ /*
+ * This condition is "impossible", if it occurs
+ * we need to fix it. Originally reported by
+ * Bjorn Helgaas on a 128-cpu setup.
+ */
+ BUG_ON(busiest_rq == target_rq);
+
+ /* move a task from busiest_rq to target_rq */
+ double_lock_balance(busiest_rq, target_rq);
+ update_rq_clock(busiest_rq);
+ update_rq_clock(target_rq);
+
+ /* Search for an sd spanning us and the target CPU. */
+ for_each_domain(target_cpu, sd) {
+ if ((sd->flags & SD_LOAD_BALANCE) &&
+ cpumask_test_cpu(busiest_cpu, sched_domain_span(sd)))
+ break;
+ }
+
+ if (likely(sd)) {
+ schedstat_inc(sd, alb_count);
+
+ if (move_one_task(target_rq, target_cpu, busiest_rq,
+ sd, CPU_IDLE))
+ schedstat_inc(sd, alb_pushed);
+ else
+ schedstat_inc(sd, alb_failed);
+ }
+ double_unlock_balance(busiest_rq, target_rq);
+}
+
+#ifdef CONFIG_NO_HZ
+static struct {
+ atomic_t load_balancer;
+ cpumask_var_t cpu_mask;
+ cpumask_var_t ilb_grp_nohz_mask;
+} nohz ____cacheline_aligned = {
+ .load_balancer = ATOMIC_INIT(-1),
+};
+
+int get_nohz_load_balancer(void)
+{
+ return atomic_read(&nohz.load_balancer);
+}
+
+#if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
+/**
+ * lowest_flag_domain - Return lowest sched_domain containing flag.
+ * @cpu: The cpu whose lowest level of sched domain is to
+ * be returned.
+ * @flag: The flag to check for the lowest sched_domain
+ * for the given cpu.
+ *
+ * Returns the lowest sched_domain of a cpu which contains the given flag.
+ */
+static inline struct sched_domain *lowest_flag_domain(int cpu, int flag)
+{
+ struct sched_domain *sd;
+
+ for_each_domain(cpu, sd)
+ if (sd && (sd->flags & flag))
+ break;
+
+ return sd;
+}
+
+/**
+ * for_each_flag_domain - Iterates over sched_domains containing the flag.
+ * @cpu: The cpu whose domains we're iterating over.
+ * @sd: variable holding the value of the power_savings_sd
+ * for cpu.
+ * @flag: The flag to filter the sched_domains to be iterated.
+ *
+ * Iterates over all the scheduler domains for a given cpu that has the 'flag'
+ * set, starting from the lowest sched_domain to the highest.
+ */
+#define for_each_flag_domain(cpu, sd, flag) \
+ for (sd = lowest_flag_domain(cpu, flag); \
+ (sd && (sd->flags & flag)); sd = sd->parent)
+
+/**
+ * is_semi_idle_group - Checks if the given sched_group is semi-idle.
+ * @ilb_group: group to be checked for semi-idleness
+ *
+ * Returns: 1 if the group is semi-idle. 0 otherwise.
+ *
+ * We define a sched_group to be semi idle if it has atleast one idle-CPU
+ * and atleast one non-idle CPU. This helper function checks if the given
+ * sched_group is semi-idle or not.
+ */
+static inline int is_semi_idle_group(struct sched_group *ilb_group)
+{
+ cpumask_and(nohz.ilb_grp_nohz_mask, nohz.cpu_mask,
+ sched_group_cpus(ilb_group));
+
+ /*
+ * A sched_group is semi-idle when it has atleast one busy cpu
+ * and atleast one idle cpu.
+ */
+ if (cpumask_empty(nohz.ilb_grp_nohz_mask))
+ return 0;
+
+ if (cpumask_equal(nohz.ilb_grp_nohz_mask, sched_group_cpus(ilb_group)))
+ return 0;
+
+ return 1;
+}
+/**
+ * find_new_ilb - Finds the optimum idle load balancer for nomination.
+ * @cpu: The cpu which is nominating a new idle_load_balancer.
+ *
+ * Returns: Returns the id of the idle load balancer if it exists,
+ * Else, returns >= nr_cpu_ids.
+ *
+ * This algorithm picks the idle load balancer such that it belongs to a
+ * semi-idle powersavings sched_domain. The idea is to try and avoid
+ * completely idle packages/cores just for the purpose of idle load balancing
+ * when there are other idle cpu's which are better suited for that job.
+ */
+static int find_new_ilb(int cpu)
+{
+ struct sched_domain *sd;
+ struct sched_group *ilb_group;
+
+ /*
+ * Have idle load balancer selection from semi-idle packages only
+ * when power-aware load balancing is enabled
+ */
+ if (!(sched_smt_power_savings || sched_mc_power_savings))
+ goto out_done;
+
+ /*
+ * Optimize for the case when we have no idle CPUs or only one
+ * idle CPU. Don't walk the sched_domain hierarchy in such cases
+ */
+ if (cpumask_weight(nohz.cpu_mask) < 2)
+ goto out_done;
+
+ for_each_flag_domain(cpu, sd, SD_POWERSAVINGS_BALANCE) {
+ ilb_group = sd->groups;
+
+ do {
+ if (is_semi_idle_group(ilb_group))
+ return cpumask_first(nohz.ilb_grp_nohz_mask);
+
+ ilb_group = ilb_group->next;
+
+ } while (ilb_group != sd->groups);
+ }
+
+out_done:
+ return cpumask_first(nohz.cpu_mask);
+}
+#else /* (CONFIG_SCHED_MC || CONFIG_SCHED_SMT) */
+static inline int find_new_ilb(int call_cpu)
+{
+ return cpumask_first(nohz.cpu_mask);
+}
+#endif
+
+/*
+ * This routine will try to nominate the ilb (idle load balancing)
+ * owner among the cpus whose ticks are stopped. ilb owner will do the idle
+ * load balancing on behalf of all those cpus. If all the cpus in the system
+ * go into this tickless mode, then there will be no ilb owner (as there is
+ * no need for one) and all the cpus will sleep till the next wakeup event
+ * arrives...
+ *
+ * For the ilb owner, tick is not stopped. And this tick will be used
+ * for idle load balancing. ilb owner will still be part of
+ * nohz.cpu_mask..
+ *
+ * While stopping the tick, this cpu will become the ilb owner if there
+ * is no other owner. And will be the owner till that cpu becomes busy
+ * or if all cpus in the system stop their ticks at which point
+ * there is no need for ilb owner.
+ *
+ * When the ilb owner becomes busy, it nominates another owner, during the
+ * next busy scheduler_tick()
+ */
+int select_nohz_load_balancer(int stop_tick)
+{
+ int cpu = smp_processor_id();
+
+ if (stop_tick) {
+ cpu_rq(cpu)->in_nohz_recently = 1;
+
+ if (!cpu_active(cpu)) {
+ if (atomic_read(&nohz.load_balancer) != cpu)
+ return 0;
+
+ /*
+ * If we are going offline and still the leader,
+ * give up!
+ */
+ if (atomic_cmpxchg(&nohz.load_balancer, cpu, -1) != cpu)
+ BUG();
+
+ return 0;
+ }
+
+ cpumask_set_cpu(cpu, nohz.cpu_mask);
+
+ /* time for ilb owner also to sleep */
+ if (cpumask_weight(nohz.cpu_mask) == num_active_cpus()) {
+ if (atomic_read(&nohz.load_balancer) == cpu)
+ atomic_set(&nohz.load_balancer, -1);
+ return 0;
+ }
+
+ if (atomic_read(&nohz.load_balancer) == -1) {
+ /* make me the ilb owner */
+ if (atomic_cmpxchg(&nohz.load_balancer, -1, cpu) == -1)
+ return 1;
+ } else if (atomic_read(&nohz.load_balancer) == cpu) {
+ int new_ilb;
+
+ if (!(sched_smt_power_savings ||
+ sched_mc_power_savings))
+ return 1;
+ /*
+ * Check to see if there is a more power-efficient
+ * ilb.
+ */
+ new_ilb = find_new_ilb(cpu);
+ if (new_ilb < nr_cpu_ids && new_ilb != cpu) {
+ atomic_set(&nohz.load_balancer, -1);
+ resched_cpu(new_ilb);
+ return 0;
+ }
+ return 1;
+ }
+ } else {
+ if (!cpumask_test_cpu(cpu, nohz.cpu_mask))
+ return 0;
+
+ cpumask_clear_cpu(cpu, nohz.cpu_mask);
+
+ if (atomic_read(&nohz.load_balancer) == cpu)
+ if (atomic_cmpxchg(&nohz.load_balancer, cpu, -1) != cpu)
+ BUG();
+ }
+ return 0;
+}
+#endif
+
+static DEFINE_SPINLOCK(balancing);
+
+/*
+ * It checks each scheduling domain to see if it is due to be balanced,
+ * and initiates a balancing operation if so.
+ *
+ * Balancing parameters are set up in arch_init_sched_domains.
+ */
+static void rebalance_domains(int cpu, enum cpu_idle_type idle)
+{
+ int balance = 1;
+ struct rq *rq = cpu_rq(cpu);
+ unsigned long interval;
+ struct sched_domain *sd;
+ /* Earliest time when we have to do rebalance again */
+ unsigned long next_balance = jiffies + 60*HZ;
+ int update_next_balance = 0;
+ int need_serialize;
+
+ for_each_domain(cpu, sd) {
+ if (!(sd->flags & SD_LOAD_BALANCE))
+ continue;
+
+ interval = sd->balance_interval;
+ if (idle != CPU_IDLE)
+ interval *= sd->busy_factor;
+
+ /* scale ms to jiffies */
+ interval = msecs_to_jiffies(interval);
+ if (unlikely(!interval))
+ interval = 1;
+ if (interval > HZ*NR_CPUS/10)
+ interval = HZ*NR_CPUS/10;
+
+ need_serialize = sd->flags & SD_SERIALIZE;
+
+ if (need_serialize) {
+ if (!spin_trylock(&balancing))
+ goto out;
+ }
+
+ if (time_after_eq(jiffies, sd->last_balance + interval)) {
+ if (load_balance(cpu, rq, sd, idle, &balance)) {
+ /*
+ * We've pulled tasks over so either we're no
+ * longer idle, or one of our SMT siblings is
+ * not idle.
+ */
+ idle = CPU_NOT_IDLE;
+ }
+ sd->last_balance = jiffies;
+ }
+ if (need_serialize)
+ spin_unlock(&balancing);
+out:
+ if (time_after(next_balance, sd->last_balance + interval)) {
+ next_balance = sd->last_balance + interval;
+ update_next_balance = 1;
+ }
+
+ /*
+ * Stop the load balance at this level. There is another
+ * CPU in our sched group which is doing load balancing more
+ * actively.
+ */
+ if (!balance)
+ break;
+ }
+
+ /*
+ * next_balance will be updated only when there is a need.
+ * When the cpu is attached to null domain for ex, it will not be
+ * updated.
+ */
+ if (likely(update_next_balance))
+ rq->next_balance = next_balance;
+}
+
+/*
+ * run_rebalance_domains is triggered when needed from the scheduler tick.
+ * In CONFIG_NO_HZ case, the idle load balance owner will do the
+ * rebalancing for all the cpus for whom scheduler ticks are stopped.
+ */
+static void run_rebalance_domains(struct softirq_action *h)
+{
+ int this_cpu = smp_processor_id();
+ struct rq *this_rq = cpu_rq(this_cpu);
+ enum cpu_idle_type idle = this_rq->idle_at_tick ?
+ CPU_IDLE : CPU_NOT_IDLE;
+
+ rebalance_domains(this_cpu, idle);
+
+#ifdef CONFIG_NO_HZ
+ /*
+ * If this cpu is the owner for idle load balancing, then do the
+ * balancing on behalf of the other idle cpus whose ticks are
+ * stopped.
+ */
+ if (this_rq->idle_at_tick &&
+ atomic_read(&nohz.load_balancer) == this_cpu) {
+ struct rq *rq;
+ int balance_cpu;
+
+ for_each_cpu(balance_cpu, nohz.cpu_mask) {
+ if (balance_cpu == this_cpu)
+ continue;
+
+ /*
+ * If this cpu gets work to do, stop the load balancing
+ * work being done for other cpus. Next load
+ * balancing owner will pick it up.
+ */
+ if (need_resched())
+ break;
+
+ rebalance_domains(balance_cpu, CPU_IDLE);
+
+ rq = cpu_rq(balance_cpu);
+ if (time_after(this_rq->next_balance, rq->next_balance))
+ this_rq->next_balance = rq->next_balance;
+ }
+ }
+#endif
+}
+
+static inline int on_null_domain(int cpu)
+{
+ return !rcu_dereference(cpu_rq(cpu)->sd);
+}
+
+/*
+ * Trigger the SCHED_SOFTIRQ if it is time to do periodic load balancing.
+ *
+ * In case of CONFIG_NO_HZ, this is the place where we nominate a new
+ * idle load balancing owner or decide to stop the periodic load balancing,
+ * if the whole system is idle.
+ */
+static inline void trigger_load_balance(struct rq *rq, int cpu)
+{
+#ifdef CONFIG_NO_HZ
+ /*
+ * If we were in the nohz mode recently and busy at the current
+ * scheduler tick, then check if we need to nominate new idle
+ * load balancer.
+ */
+ if (rq->in_nohz_recently && !rq->idle_at_tick) {
+ rq->in_nohz_recently = 0;
+
+ if (atomic_read(&nohz.load_balancer) == cpu) {
+ cpumask_clear_cpu(cpu, nohz.cpu_mask);
+ atomic_set(&nohz.load_balancer, -1);
+ }
+
+ if (atomic_read(&nohz.load_balancer) == -1) {
+ int ilb = find_new_ilb(cpu);
+
+ if (ilb < nr_cpu_ids)
+ resched_cpu(ilb);
+ }
+ }
+
+ /*
+ * If this cpu is idle and doing idle load balancing for all the
+ * cpus with ticks stopped, is it time for that to stop?
+ */
+ if (rq->idle_at_tick && atomic_read(&nohz.load_balancer) == cpu &&
+ cpumask_weight(nohz.cpu_mask) == num_online_cpus()) {
+ resched_cpu(cpu);
+ return;
+ }
+
+ /*
+ * If this cpu is idle and the idle load balancing is done by
+ * someone else, then no need raise the SCHED_SOFTIRQ
+ */
+ if (rq->idle_at_tick && atomic_read(&nohz.load_balancer) != cpu &&
+ cpumask_test_cpu(cpu, nohz.cpu_mask))
+ return;
+#endif
+ /* Don't need to rebalance while attached to NULL domain */
+ if (time_after_eq(jiffies, rq->next_balance) &&
+ likely(!on_null_domain(cpu)))
+ raise_softirq(SCHED_SOFTIRQ);
+}
+
static void rq_online_fair(struct rq *rq)
{
update_sysctl();
@@ -1962,6 +3718,15 @@ static void rq_offline_fair(struct rq *rq)
update_sysctl();
}
+#else /* CONFIG_SMP */
+
+/*
+ * on UP we do not need to balance between CPUs:
+ */
+static inline void idle_balance(int cpu, struct rq *rq)
+{
+}
+
#endif /* CONFIG_SMP */
/*
next prev parent reply other threads:[~2010-01-21 13:53 UTC|newest]
Thread overview: 1149+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-24 8:09 [patch] perf tools: allow top users to switch between weighted and individual counter display Mike Galbraith
2009-07-24 8:58 ` Peter Zijlstra
2009-07-24 10:37 ` Mike Galbraith
2009-08-02 20:00 ` Ingo Molnar
2009-08-03 5:09 ` Mike Galbraith
2009-08-04 8:21 ` Mike Galbraith
2009-08-04 8:24 ` [patch] perf tools: update perf top man page Mike Galbraith
[not found] ` <new-submission>
2009-03-18 9:18 ` [tip:tracing/tasks] tracing: stop command line recording when tracing is disabled Thomas Gleixner
2009-03-18 9:18 ` [tip:tracing/tasks] tracing: replace the crude (unsigned) -1 hackery Thomas Gleixner
2009-03-18 9:18 ` [tip:tracing/tasks] tracing: fix trace_find_cmdline() Thomas Gleixner
2009-03-18 9:18 ` [tip:tracing/tasks] tracing: fix command line to pid reverse map Carsten Emde
2009-03-29 22:24 ` [tip:x86/mm] x86/mm: further cleanups of fault.c's include file section Ingo Molnar
2009-03-30 12:06 ` Ingo Molnar
2009-04-01 10:15 ` [tip:perfcounters/core] perf_counter tools: kerneltop: add real-time data acquisition thread Mike Galbraith
2009-05-04 17:33 ` [tip:perfcounters/core] perf_counter: round-robin per-CPU counters too tip-bot for Ingo Molnar
2009-05-04 17:33 ` [tip:perfcounters/core] perf_counter: initialize the per-cpu context earlier tip-bot for Ingo Molnar
2009-05-04 17:34 ` [tip:perfcounters/core] perf_counter: convert perf_resource_mutex to a spinlock tip-bot for Ingo Molnar
[not found] ` <tip-48dd0fed90e2b1f1ba87401439b85942181c6df3@git.kernel.org>
2009-05-06 14:24 ` [tip:tracing/core] tracing: trace_output.c, fix false positive compiler warning Steven Rostedt
2009-05-06 14:36 ` Ingo Molnar
2009-05-06 14:49 ` Steven Rostedt
2009-05-06 14:51 ` [tip:tracing/core] tracing: small trave_events sample Makefile cleanup tip-bot for Christoph Hellwig
2009-05-07 9:19 ` [tip:x86/cleanups] x86: clean up arch/x86/kernel/tsc_sync.c a bit tip-bot for Ingo Molnar
2009-05-11 9:53 ` [tip:x86/apic] x86: apic: Check rev 3 fadt correctly for physical_apic bit tip-bot for Yinghai Lu
2009-05-11 9:53 ` [tip:x86/cpufeature] x86: clean up and fix setup_clear/force_cpu_cap handling tip-bot for Yinghai Lu
2009-05-11 10:10 ` [tip:perfcounters/core] perf_counter, x86: clean up throttling printk tip-bot for Mike Galbraith
2009-05-12 14:33 ` [tip:core/urgent] lockdep: increase MAX_LOCKDEP_ENTRIES tip-bot for Ingo Molnar
2009-05-12 18:27 ` [tip:core/urgent] lockdep: increase MAX_LOCKDEP_ENTRIES and MAX_LOCKDEP_CHAINS tip-bot for Ingo Molnar
2009-05-13 6:21 ` [tip:perfcounters/core] perf_counter: fix print debug irq disable tip-bot for Peter Zijlstra
2009-05-13 13:52 ` [tip:x86/urgent] xen: use header for EXPORT_SYMBOL_GPL tip-bot for Randy Dunlap
2009-05-15 8:42 ` [tip:perfcounters/core] perf_counter: x86: More accurate counter update tip-bot for Peter Zijlstra
2009-05-15 8:42 ` [tip:perfcounters/core] perf_counter: x86: Fix throttling tip-bot for Ingo Molnar
2009-05-15 8:42 ` [tip:perfcounters/core] perf_counter: x86: Allow unpriviliged use of NMIs tip-bot for Peter Zijlstra
2009-05-15 8:43 ` [tip:perfcounters/core] perf_counter: Fix perf_output_copy() WARN to account for overflow tip-bot for Peter Zijlstra
2009-05-15 8:43 ` [tip:perfcounters/core] perf_counter: x86: Fix up the amd NMI/INT throttle tip-bot for Peter Zijlstra
2009-05-15 8:43 ` [tip:perfcounters/core] perf_counter: Rework the perf counter disable/enable tip-bot for Peter Zijlstra
2009-05-15 11:05 ` Paul Mackerras
2009-05-15 11:23 ` Peter Zijlstra
2009-05-15 8:43 ` [tip:perfcounters/core] perf_counter: x86: Robustify interrupt handling tip-bot for Peter Zijlstra
2009-05-15 8:43 ` [tip:perfcounters/core] perf_counter: x86: Disallow interval of 1 tip-bot for Ingo Molnar
2009-05-15 8:44 ` [tip:perfcounters/core] perf_counter: x86: Protect against infinite loops in intel_pmu_handle_irq() tip-bot for Ingo Molnar
2009-05-15 8:44 ` [tip:perfcounters/core] perf_counter: Remove ACPI quirk tip-bot for Ingo Molnar
2009-05-15 10:12 ` [tip:perfcounters/core] perf stat: handle Ctrl-C tip-bot for Ingo Molnar
2009-05-28 11:09 ` Paul Mackerras
2009-05-28 12:19 ` Peter Zijlstra
2009-05-29 9:06 ` Ingo Molnar
2009-05-18 7:40 ` [tip:perfcounters/core] perf_counter, x86: speed up the scheduling fast-path tip-bot for Ingo Molnar
2009-05-20 18:15 ` [tip:perfcounters/core] perf_counter: Fix context removal deadlock tip-bot for Ingo Molnar
2009-05-22 16:21 ` [tip:perfcounters/core] perf_counter tools: increase limits tip-bot for Ingo Molnar
2009-05-24 7:02 ` [tip:perfcounters/core] perf top: fix segfault tip-bot for Mike Galbraith
2009-05-25 3:39 ` [tip:perfcounters/core] perf_counter: Increase mmap limit tip-bot for Ingo Molnar
2009-05-25 8:03 ` [tip:perfcounters/core] perf_counter tools: increase limits, fix tip-bot for Ingo Molnar
2009-05-25 11:03 ` [tip:perfcounters/core] perf top: Reduce display overhead tip-bot for Mike Galbraith
2009-05-25 11:06 ` [tip:perfcounters/core] perf_counter: Move child perfcounter init to after scheduler init tip-bot for Ingo Molnar
2009-05-25 12:45 ` [tip:perfcounters/core] perf stat: flip around ':k' and ':u' flags tip-bot for Ingo Molnar
2009-05-26 7:57 ` [tip:perfcounters/core] perf_counter, x86: Fix APIC NMI programming tip-bot for Ingo Molnar
2009-05-26 7:57 ` [tip:perfcounters/core] perf_counter, x86: Make NMI lockups more robust tip-bot for Ingo Molnar
2009-05-26 7:57 ` [tip:perfcounters/core] perf_counter: Initialize ->oncpu properly tip-bot for Ingo Molnar
2009-05-26 10:33 ` [tip:perfcounters/core] perf record: Straighten out argv types tip-bot for Ingo Molnar
2009-05-26 10:34 ` [tip:perfcounters/core] perf stat: Remove unused variable tip-bot for Ingo Molnar
2009-05-26 10:34 ` [tip:perfcounters/core] perf record: Convert to Git option parsing tip-bot for Ingo Molnar
2009-05-26 10:34 ` [tip:perfcounters/core] perf_counter tools: Librarize event string parsing tip-bot for Ingo Molnar
2009-05-26 11:03 ` [tip:perfcounters/core] perf stat: Convert to Git option parsing tip-bot for Ingo Molnar
2009-05-26 11:36 ` [tip:perfcounters/core] perf top: " tip-bot for Ingo Molnar
2009-05-26 12:12 ` [tip:perfcounters/core] perf_counter: First part of 'perf report' conversion to C + elfutils tip-bot for Arnaldo Carvalho de Melo
2009-05-26 12:12 ` [tip:perfcounters/core] perf_counter tools: remove the standalone perf-report utility tip-bot for Ingo Molnar
2009-05-26 12:13 ` [tip:perfcounters/core] perf_counter: Implement dso__load using libelf tip-bot for Arnaldo Carvalho de Melo
2009-05-26 12:13 ` [tip:perfcounters/core] perf_counter: Use rb_trees in perf report tip-bot for Arnaldo Carvalho de Melo
2009-05-26 12:13 ` [tip:perfcounters/core] perf_counter: Add our private copy of list.h tip-bot for Arnaldo Carvalho de Melo
2009-05-26 12:13 ` [tip:perfcounters/core] perf_counter: Use rb_tree for symhists and threads in report tip-bot for Arnaldo Carvalho de Melo
2009-05-26 12:14 ` [tip:perfcounters/core] perf record: Convert to Git option parsing tip-bot for Ingo Molnar
2009-05-26 12:15 ` [tip:perfcounters/core] perf report: Add help/manpage tip-bot for Ingo Molnar
2009-05-26 13:27 ` [tip:perfcounters/core] perf top: Remove leftover NMI/IRQ bits tip-bot for Mike Galbraith
2009-05-26 13:27 ` [tip:perfcounters/core] perf top: fix typo in -d option tip-bot for Mike Galbraith
2009-05-26 14:24 ` [tip:perfcounters/core] perf report: Fix ELF symbol parsing tip-bot for Peter Zijlstra
2009-05-26 14:24 ` [tip:perfcounters/core] perf report: Fix kernel symbol resolution tip-bot for Arnaldo Carvalho de Melo
2009-05-26 15:21 ` [PATCH 1/1 tip] perf: Don't assume /proc/kallsyms is ordered Arnaldo Carvalho de Melo
2009-05-26 15:39 ` [tip:perfcounters/core] " tip-bot for Arnaldo Carvalho de Melo
2009-05-26 17:56 ` [PATCH 1/1 tip] " Peter Zijlstra
2009-05-26 17:54 ` [tip:perfcounters/core] perf report: add --dump-raw-trace option tip-bot for Ingo Molnar
2009-05-26 18:09 ` [tip:perfcounters/core] perf report: add counter for unknown events tip-bot for Ingo Molnar
2009-05-26 18:09 ` [tip:perfcounters/core] perf report: add more debugging tip-bot for Ingo Molnar
2009-05-26 18:21 ` tip-bot for Ingo Molnar
2009-05-26 19:21 ` [tip:perfcounters/core] perf report: More robust error handling tip-bot for Peter Zijlstra
2009-05-27 7:36 ` [tip:perfcounters/core] perf_counter tools: Rename output.perf to perf.data tip-bot for Ingo Molnar
2009-05-27 9:06 ` [tip:perfcounters/core] perf_counter tools: Add built-in pager support tip-bot for Ingo Molnar
2009-05-27 10:33 ` [tip:perfcounters/core] perf record: Fix the profiling of existing pid or whole box tip-bot for Mike Galbraith
2009-05-27 11:24 ` [tip:perfcounters/core] perf report: Remove <ctype.h> include tip-bot for Ingo Molnar
2009-05-27 13:03 ` [tip:perfcounters/core] perf_counter: tools: /usr/lib/debug%s.debug support tip-bot for Peter Zijlstra
2009-05-27 21:25 ` [tip:perfcounters/core] pref_counter: tools: report: Robustify in case of weird events tip-bot for Ingo Molnar
2009-05-28 9:46 ` [tip:perfcounters/core] perf_counter: Fix perf_counter_init_task() on !CONFIG_PERF_COUNTERS tip-bot for Ingo Molnar
2009-05-28 10:00 ` [tip:perfcounters/core] perf_counter tools: report: Implement header output for --sort variants tip-bot for Peter Zijlstra
2009-05-28 10:00 ` [tip:perfcounters/core] perf_counter tools: report: Add help text for --sort tip-bot for Ingo Molnar
2009-05-28 22:03 ` [tip:perfcounters/core] perf_counter tools: Document '--' option parsing terminator tip-bot for Mike Galbraith
2009-05-29 7:06 ` [tip:perfcounters/core] perf_counter tools: Fix top symbol table dump typo tip-bot for Mike Galbraith
2009-05-29 7:07 ` [tip:perfcounters/core] perf_counter tools: Fix top symbol table max_ip typo tip-bot for Mike Galbraith
2009-05-29 9:00 ` [tip:perfcounters/core] perf_counter tools: Clean up builtin-stat.c's do_perfstat() tip-bot for Ingo Molnar
2009-05-29 9:00 ` [tip:perfcounters/core] perf_counter tools: Split display into reading and printing tip-bot for Ingo Molnar
2009-05-29 9:01 ` [tip:perfcounters/core] perf_counter tools: Also display time-normalized stat results tip-bot for Ingo Molnar
2009-05-29 12:27 ` [tip:perfcounters/core] perf_counter: Fix cpuctx->task_ctx races tip-bot for Ingo Molnar
2009-05-29 12:27 ` [tip:perfcounters/core] perf_counter: Robustify counter-free logic tip-bot for Ingo Molnar
2009-05-29 17:15 ` [tip:sched/core] ftrace: fix typo about map of kernel priority in ftrace.txt file tip-bot for GeunSik Lim
2009-05-29 17:15 ` [tip:sched/core] sched: fix typo in sched-rt-group.txt file tip-bot for GeunSik Lim
2009-05-29 17:16 ` [tip:perfcounters/core] perf_counter: Fix COMM and MMAP events for cpu wide counters tip-bot for Peter Zijlstra
2009-05-30 0:15 ` GeunSik Lim
2009-05-30 0:23 ` Yinghai Lu
2009-05-30 9:40 ` Ingo Molnar
2009-05-30 11:27 ` GeunSik Lim
2009-05-29 17:16 ` [tip:perfcounters/core] perf_counter: Clean up task_ctx vs interrupts tip-bot for Peter Zijlstra
2009-05-29 17:16 ` [tip:perfcounters/core] perf_counter: Ammend cleanup in fork() fail tip-bot for Peter Zijlstra
2009-05-30 11:45 ` [tip:perfcounters/core] perf_counter tools: Print 'CPU utilization factor' in builtin-stat tip-bot for Ingo Molnar
2009-05-30 11:51 ` [tip:perfcounters/core] perf_counter tools: Fix 'make install' tip-bot for Ingo Molnar
2009-05-30 13:00 ` [tip:perfcounters/core] perf_counter tools: Generate per command manpages (and pdf/html, etc.) tip-bot for Ingo Molnar
2009-05-30 13:46 ` Sam Ravnborg
2009-05-30 14:47 ` Ingo Molnar
2009-05-30 15:37 ` Jaswinder Singh Rajput
2009-05-30 16:38 ` Sam Ravnborg
2009-05-30 17:23 ` Ingo Molnar
2009-05-31 20:16 ` [tip:perfcounters/core] perf_counter tools: Fix unknown command help text tip-bot for Ingo Molnar
2009-06-01 8:19 ` [tip:perfcounters/core] perf_counter: Tidy up style details tip-bot for Ingo Molnar
2009-06-01 17:57 ` tip-bot for Ingo Molnar
2009-06-01 18:22 ` Frans Pop
2009-06-01 18:43 ` Ingo Molnar
2009-06-01 18:42 ` [tip:perfcounters/core] perf_counter tools: Guard against record damaging existing files tip-bot for Mike Galbraith
2009-06-02 1:45 ` [tip:perfcounters/core] perf_counter tools: Add string.[ch] tip-bot for Arnaldo Carvalho de Melo
2009-06-02 8:25 ` [tip:perfcounters/core] perf_counter tools: Make .gitignore reflect perf_counter tools files tip-bot for Mike Galbraith
2009-06-02 9:03 ` [tip:perfcounters/core] perf_counter tools: Cleanup Makefile tip-bot for Mike Galbraith
2009-06-02 14:19 ` [tip:perfcounters/core] perf_counter: Use PID namespaces properly tip-bot for Peter Zijlstra
2009-06-02 15:55 ` Oleg Nesterov
2009-06-02 16:28 ` Peter Zijlstra
2009-06-02 16:30 ` Oleg Nesterov
2009-06-02 14:19 ` [tip:perfcounters/core] perf_counter: tools: Expand the COMM,MMAP event synthesizer tip-bot for Peter Zijlstra
2009-06-02 14:19 ` [tip:perfcounters/core] perf_counter: tools: Better handle existing data files tip-bot for Peter Zijlstra
2009-06-02 14:42 ` [tip:perfcounters/core] perf report: Clean up the default output tip-bot for Ingo Molnar
2009-06-02 20:15 ` [tip:perfcounters/core] perf_counter tools: Remove the last nmi bits tip-bot for Peter Zijlstra
2009-06-02 20:15 ` [tip:perfcounters/core] x86: Fix atomic_long_xchg() on 64bit tip-bot for Peter Zijlstra
2009-06-02 20:16 ` [tip:perfcounters/core] perf_counter: Add unique counter id tip-bot for Peter Zijlstra
2009-06-02 20:16 ` [tip:perfcounters/core] perf_counter: Rename various fields tip-bot for Peter Zijlstra
2009-06-02 20:16 ` [tip:perfcounters/core] perf_counter: Remove the last nmi/irq bits tip-bot for Peter Zijlstra
2009-06-02 20:16 ` [tip:perfcounters/core] perf_counter: x86: Emulate longer sample periods tip-bot for Peter Zijlstra
2009-06-02 20:16 ` [tip:perfcounters/core] perf_counter: Change data head from u32 to u64 tip-bot for Peter Zijlstra
2009-06-02 20:17 ` [tip:perfcounters/core] perf_counter: Add ioctl for changing the sample period/frequency tip-bot for Peter Zijlstra
2009-06-02 20:17 ` [tip:perfcounters/core] perf_counter: Rename perf_counter_hw_event => perf_counter_attr tip-bot for Peter Zijlstra
2009-06-02 20:17 ` [tip:perfcounters/core] perf_counter tools: Fix up the ABI shakeup tip-bot for Peter Zijlstra
2009-06-02 20:17 ` [tip:perfcounters/core] perf report: Separate out idle threads tip-bot for Peter Zijlstra
2009-06-02 20:17 ` [tip:perfcounters/core] perf report: Fix column width/alignment of dsos tip-bot for Ingo Molnar
2009-06-02 22:07 ` [tip:perfcounters/core] perf record: Add --append option tip-bot for Ingo Molnar
2009-06-02 22:32 ` [tip:perfcounters/core] perf record: Increase mmap buffering default tip-bot for Ingo Molnar
2009-06-02 22:32 ` [tip:perfcounters/core] perf report: Print more info instead of <unknown> entries tip-bot for Ingo Molnar
2009-06-02 22:42 ` [tip:perfcounters/core] perf_counter tools: Make source code headers more coherent tip-bot for Ingo Molnar
2009-06-02 22:49 ` [tip:perfcounters/core] perf record: Print out the number of events captured tip-bot for Ingo Molnar
2009-06-03 8:46 ` [tip:perfcounters/core] perf_counter tools: Cover PLT symbols too tip-bot for Arnaldo Carvalho de Melo
2009-06-03 8:46 ` [tip:perfcounters/core] perf report: Print -D to stdout tip-bot for Ingo Molnar
2009-06-03 9:48 ` tip-bot for Ingo Molnar
2009-06-03 9:48 ` [tip:perfcounters/core] perf report: Improve sort key recognition tip-bot for Ingo Molnar
2009-06-03 9:48 ` [tip:perfcounters/core] perf report: Handle vDSO symbols properly tip-bot for Ingo Molnar
2009-06-03 13:06 ` [tip:perfcounters/core] perf_counter: Add a comm hook for pure fork()s tip-bot for Peter Zijlstra
2009-06-03 13:06 ` [tip:perfcounters/core] perf record: Use long arg for counter period tip-bot for Peter Zijlstra
2009-06-03 13:06 ` [tip:perfcounters/core] perf report: Fix comm sorting tip-bot for Peter Zijlstra
2009-06-03 13:07 ` [tip:perfcounters/core] perf_counter: Fix race in counter initialization tip-bot for Peter Zijlstra
2009-06-03 18:24 ` [tip:perfcounters/core] perf_counter tools: Clean up old kerneltop references tip-bot for Ingo Molnar
2009-06-03 18:33 ` [tip:perfcounters/core] perf record: Refine capture printout tip-bot for Ingo Molnar
2009-06-03 18:42 ` [tip:perfcounters/core] perf report: Display 100% correctly tip-bot for Ingo Molnar
2009-06-03 18:42 ` [tip:perfcounters/core] perf stat: Print out all arguments tip-bot for Ingo Molnar
2009-06-03 19:15 ` [tip:perfcounters/core] perf report: Add front-entry cache for lookups tip-bot for Ingo Molnar
2009-06-03 19:15 ` [tip:perfcounters/core] perf help: Fix bug when there's no perf-* command around tip-bot for Ingo Molnar
2009-06-03 19:21 ` [tip:perfcounters/core] perf_counter tools: Optimize harder tip-bot for Ingo Molnar
2009-06-03 21:42 ` [tip:perfcounters/core] perf_counter: Fix throttling lock-up tip-bot for Ingo Molnar
2009-06-03 22:35 ` [tip:perfcounters/core] perf report: Clean up event processing tip-bot for Ingo Molnar
2009-06-03 22:35 ` [tip:perfcounters/core] perf report: Split out event processing helpers tip-bot for Ingo Molnar
2009-06-03 22:35 ` [tip:perfcounters/core] perf report: Handle all known event types tip-bot for Ingo Molnar
2009-06-04 7:33 ` [tip:perfcounters/core] perf report: Fix rbtree bug tip-bot for Arnaldo Carvalho de Melo
2009-06-04 8:06 ` [tip:perfcounters/core] perf top: Reduce default filter threshold tip-bot for Ingo Molnar
2009-06-04 12:48 ` [tip:perfcounters/core] perf record/report: Fix PID/COMM handling tip-bot for Ingo Molnar
2009-06-04 13:09 ` [tip:perfcounters/core] perf_counter tools: Build with native optimization tip-bot for Ingo Molnar
2009-06-05 1:03 ` Paul Mackerras
2009-06-05 18:42 ` Ingo Molnar
2009-06-04 13:09 ` [tip:perfcounters/core] perf report: Simplify symbol output tip-bot for Peter Zijlstra
2009-06-04 13:21 ` [tip:perfcounters/core] perf_counter tools: Print out symbol parsing errors only if --verbose tip-bot for Ingo Molnar
2009-06-04 13:27 ` [tip:perfcounters/core] perf report: Print out the total number of events tip-bot for Ingo Molnar
2009-06-04 13:30 ` [tip:perfcounters/core] perf report: Add consistent spacing rules tip-bot for Peter Zijlstra
2009-06-04 14:09 ` tip-bot for Peter Zijlstra
2009-06-04 14:33 ` [tip:perfcounters/core] perf_counter tools: Add color terminal output support tip-bot for Ingo Molnar
2009-06-04 14:51 ` [tip:perfcounters/core] perf_counter tools: Dont output in color on !tty tip-bot for Ingo Molnar
2009-06-04 15:30 ` [tip:perfcounters/core] perf report: Bail out if there are unrecognized options/arguments tip-bot for Ingo Molnar
2009-06-04 15:39 ` [tip:perfcounters/core] perf stat: Update help text tip-bot for Ingo Molnar
2009-06-04 16:00 ` [tip:perfcounters/core] perf_counter: Add fork event tip-bot for Peter Zijlstra
2009-06-04 16:00 ` [tip:perfcounters/core] perf_counter: Remove munmap stuff tip-bot for Peter Zijlstra
2009-06-04 16:01 ` [tip:perfcounters/core] perf_counter tools: Use fork and remove munmap events tip-bot for Peter Zijlstra
2009-06-05 12:45 ` [tip:perfcounters/core] perf record: Split out counter creation into a helper function tip-bot for Ingo Molnar
2009-06-05 12:45 ` [tip:perfcounters/core] perf record, top: Implement --freq tip-bot for Ingo Molnar
2009-06-05 13:21 ` [tip:perfcounters/core] x86: Set context.vdso before installing the mapping tip-bot for Peter Zijlstra
2009-06-05 13:21 ` [tip:perfcounters/core] perf_counter: Generate mmap events for install_special_mapping() tip-bot for Peter Zijlstra
2009-06-05 13:21 ` [tip:perfcounters/core] perf report: Deal with maps tip-bot for Peter Zijlstra
2009-06-05 13:57 ` Arnaldo Carvalho de Melo
2009-06-05 14:06 ` Peter Zijlstra
2009-06-05 15:02 ` Arnaldo Carvalho de Melo
2009-06-05 13:22 ` [tip:perfcounters/core] perf report: Display user/kernel differentiator tip-bot for Ingo Molnar
2009-06-05 13:33 ` [tip:perfcounters/core] perf record/top: Clarify events/samples naming tip-bot for Ingo Molnar
2009-06-05 13:42 ` [tip:perfcounters/core] perf_counter tools: " tip-bot for Ingo Molnar
2009-06-05 16:01 ` [tip:perfcounters/core] perf_counter tools: Remove -march=native tip-bot for Ingo Molnar
2009-06-05 16:57 ` [tip:perfcounters/core] perf_counter: Change PERF_SAMPLE_CONFIG into PERF_SAMPLE_ID tip-bot for Peter Zijlstra
2009-06-05 16:57 ` [tip:perfcounters/core] perf_counter: Add PERF_SAMPLE_PERIOD tip-bot for Peter Zijlstra
2009-06-05 16:57 ` [tip:perfcounters/core] perf_counter: Fix frequency adjustment for < HZ tip-bot for Peter Zijlstra
2009-06-05 17:12 ` [tip:perfcounters/core] perf_counter tools: Sample and display frequency adjustment changes tip-bot for Ingo Molnar
2009-06-05 18:46 ` [tip:perfcounters/core] perf record: Set frequency correctly tip-bot for Ingo Molnar
2009-06-06 9:46 ` [tip:perfcounters/core] perf_counter: Separate out attr->type from attr->config tip-bot for Ingo Molnar
2009-06-06 11:16 ` [tip:perfcounters/core] perf_counter: Implement generalized cache event types tip-bot for Ingo Molnar
2009-06-09 8:15 ` Peter Zijlstra
2009-06-09 12:15 ` Ingo Molnar
2009-06-06 13:22 ` [tip:perfcounters/core] perf_counter tools: Fix cache-event printout tip-bot for Ingo Molnar
2009-06-06 13:27 ` [tip:perfcounters/core] perf_counter tools: Add help for perf list tip-bot for Thomas Gleixner
2009-06-06 13:48 ` [tip:perfcounters/core] perf_counter tools: Uniform help printouts tip-bot for Ingo Molnar
2009-06-06 14:21 ` [tip:perfcounters/core] perf_counter tools: Tidy up manpage details tip-bot for Ingo Molnar
2009-06-06 18:03 ` [tip:perfcounters/core] perf_counter tools: Prepare for 'perf annotate' tip-bot for Ingo Molnar
2009-06-06 18:03 ` [tip:perfcounters/core] perf_counter tools: Add 'perf annotate' feature tip-bot for Ingo Molnar
2009-06-06 18:10 ` Frederic Weisbecker
2009-06-06 18:48 ` [tip:perfcounters/core] perf_counter tools: Move from Documentation/perf_counter/ to tools/perf/ tip-bot for Ingo Molnar
2009-06-06 18:48 ` [tip:perfcounters/core] perf_counter tools: Warning fixes on 32-bit tip-bot for Arjan van de Ven
2009-06-06 19:21 ` [tip:perfcounters/core] perf annotate: Automatically pick up vmlinux in the local directory tip-bot for Ingo Molnar
2009-06-06 19:24 ` [tip:perfcounters/core] perf_counter tools: Initialize a stack variable before use tip-bot for Arjan van de Ven
2009-06-06 19:27 ` [tip:perfcounters/core] perf annotate: Fix command line help text tip-bot for Ingo Molnar
2009-06-07 15:12 ` [tip:perfcounters/core] perf stat: Continue even on counter creation error tip-bot for Ingo Molnar
2009-06-07 15:36 ` [tip:perfcounters/core] perf top: Fall back to cpu-clock-tick hrtimer sampling if no cycle counter available tip-bot for Ingo Molnar
2009-06-07 15:42 ` [tip:perfcounters/core] perf record: Fall back to cpu-clock-ticks if no PMU tip-bot for Ingo Molnar
2009-06-07 15:51 ` [tip:perfcounters/core] perf_counter tools: Handle kernels with !CONFIG_PERF_COUNTER tip-bot for Ingo Molnar
2009-06-07 16:00 ` [tip:perfcounters/core] perf report: Print more expressive message in case of file open error tip-bot for Ingo Molnar
2009-06-07 17:21 ` [tip:perfcounters/core] perf stat: Print out instructins/cycle metric tip-bot for Ingo Molnar
2009-06-08 10:31 ` [tip:perfcounters/core] perf_counter, x86: Implement generalized cache event types, add Core2 support tip-bot for Thomas Gleixner
2009-06-08 10:31 ` [tip:perfcounters/core] perf_counter, x86: Implement generalized cache event types, add Atom support tip-bot for Thomas Gleixner
2009-06-08 10:31 ` [tip:perfcounters/core] perf_counter: Clean up x86 boot messages tip-bot for Ingo Molnar
2009-06-08 20:36 ` [tip:perfcounters/core] perf_counter, x86: Implement generalized cache event types, add AMD support tip-bot for Thomas Gleixner
2009-06-09 8:43 ` Peter Zijlstra
2009-06-09 12:01 ` Ingo Molnar
2009-06-08 21:33 ` tip-bot for Thomas Gleixner
2009-06-08 21:33 ` [tip:perfcounters/core] perf_counter tools: Standardize color printing tip-bot for Ingo Molnar
2009-06-10 9:51 ` [tip:core/locking] spinlock: Add missing __raw_spin_lock_flags() stub for UP tip-bot for Benjamin Herrenschmidt
2009-06-10 15:42 ` [tip:perfcounters/core] perf_counter: More aggressive frequency adjustment tip-bot for Peter Zijlstra
2009-06-10 15:42 ` [tip:perfcounters/core] perf_counter tools: Small frequency related fixes tip-bot for Peter Zijlstra
2009-06-10 15:42 ` [tip:perfcounters/core] perf_counter tools: Propagate signals properly tip-bot for Peter Zijlstra
2009-06-11 0:42 ` [tip:perfcounters/core] perf_counter: Annotate exit ctx recursion tip-bot for Peter Zijlstra
2009-06-11 0:43 ` [tip:perfcounters/core] perf_counter tools: Normalize data using per sample period data tip-bot for Peter Zijlstra
2009-06-11 0:43 ` [tip:perfcounters/core] perf_counter: Introduce struct for sample data tip-bot for Peter Zijlstra
2009-06-11 0:43 ` [tip:perfcounters/core] perf_counter: Accurate period data tip-bot for Peter Zijlstra
2009-06-12 12:42 ` [tip:core/urgent] lockdep: Select frame pointers on x86 tip-bot for Peter Zijlstra
2009-06-12 12:42 ` [tip:perfcounters/core] perf_counter: PERF_TYPE_HW_CACHE is a hardware counter too tip-bot for Peter Zijlstra
2009-06-12 12:42 ` [tip:perfcounters/core] perf_counter: Remove PERF_TYPE_RAW special casing tip-bot for Peter Zijlstra
2009-06-12 12:43 ` [tip:perfcounters/core] perf record: Explicity program a default counter tip-bot for Peter Zijlstra
2009-06-12 12:43 ` [tip:perfcounters/core] perf_counter: Add forward/backward attribute ABI compatibility tip-bot for Peter Zijlstra
2009-06-13 14:49 ` [tip:perfcounters/core] perf_counter: Fix stack corruption in perf_read_hw tip-bot for Marti Raudsepp
2009-06-13 14:49 ` [tip:perfcounters/core] perf stat: Reorganize output tip-bot for Ingo Molnar
2009-06-13 14:49 ` [tip:perfcounters/core] perf stat: Add feature to run and measure a command multiple times tip-bot for Ingo Molnar
2009-06-13 14:50 ` [tip:perfcounters/core] perf stat: Enable raw data to be printed tip-bot for Ingo Molnar
2009-06-13 18:36 ` [tip:core/urgent] lockdep: Select frame pointers on x86 tip-bot for Peter Zijlstra
2009-06-14 13:54 ` [tip:perfcounters/core] perf report: Print out raw events in hexa tip-bot for Ingo Molnar
2009-06-14 14:12 ` [tip:perfcounters/core] perf record/report: Add call graph / call chain profiling tip-bot for Ingo Molnar
2009-06-14 18:36 ` tip-bot for Ingo Molnar
2009-06-15 7:14 ` Yong Wang
2009-06-16 2:57 ` Frederic Weisbecker
2009-06-16 8:09 ` Ingo Molnar
2009-06-17 7:37 ` Peter Zijlstra
2009-06-17 12:24 ` Ingo Molnar
2009-06-17 11:41 ` Frederic Weisbecker
2009-06-17 7:29 ` Peter Zijlstra
2009-06-14 20:39 ` [tip:perfcounters/core] perf_counter, x86: Fix call-chain walking tip-bot for Ingo Molnar
2009-06-15 7:24 ` [tip:perfcounters/core] perf record: Fix fast task-exit race tip-bot for Ingo Molnar
2009-06-15 8:03 ` [tip:perfcounters/core] perf_counter, x86: Fix kernel-space call-chains tip-bot for Ingo Molnar
2009-06-15 8:33 ` tip-bot for Ingo Molnar
2009-06-15 8:33 ` [tip:perfcounters/core] perf record: Fix fast task-exit race tip-bot for Ingo Molnar
2009-06-15 14:07 ` [tip:perfcounters/core] x86, mm: Add __get_user_pages_fast() tip-bot for Peter Zijlstra
2009-06-15 14:07 ` [tip:perfcounters/core] perf_counter: x86: Fix call-chain support to use NMI-safe methods tip-bot for Peter Zijlstra
2009-06-15 16:14 ` Mathieu Desnoyers
2009-06-15 17:05 ` Ingo Molnar
2009-06-15 17:42 ` Mathieu Desnoyers
2009-06-15 18:18 ` Ingo Molnar
2009-06-15 17:11 ` Linus Torvalds
2009-06-15 17:18 ` Ingo Molnar
2009-06-15 17:37 ` Linus Torvalds
2009-06-15 18:05 ` Mathieu Desnoyers
2009-06-15 18:23 ` Ingo Molnar
2009-06-15 18:28 ` Ingo Molnar
2009-06-15 18:42 ` Mathieu Desnoyers
2009-06-15 18:47 ` Ingo Molnar
2009-06-15 18:51 ` Linus Torvalds
2009-06-15 19:16 ` Mathieu Desnoyers
2009-06-15 18:38 ` Mathieu Desnoyers
2009-06-15 18:50 ` Ingo Molnar
2009-06-15 18:39 ` H. Peter Anvin
2009-06-15 18:45 ` Ingo Molnar
2009-06-15 18:55 ` H. Peter Anvin
2009-06-15 19:02 ` Avi Kivity
2009-06-16 8:36 ` Ingo Molnar
2009-06-16 8:52 ` Avi Kivity
2009-06-16 10:50 ` Ingo Molnar
2009-06-15 18:30 ` Linus Torvalds
2009-06-15 18:36 ` Ingo Molnar
2009-06-15 18:46 ` Mathieu Desnoyers
2009-06-15 19:04 ` Linus Torvalds
2009-06-15 19:39 ` Mathieu Desnoyers
2009-06-15 19:43 ` Ingo Molnar
2009-06-15 19:51 ` Mathieu Desnoyers
2009-06-15 19:55 ` Ingo Molnar
2009-06-15 20:25 ` Ingo Molnar
2009-06-15 20:04 ` Linus Torvalds
2009-06-15 20:30 ` Ingo Molnar
2009-06-15 20:06 ` Mathieu Desnoyers
2009-06-15 20:10 ` H. Peter Anvin
2009-06-15 20:47 ` Ingo Molnar
2009-06-15 21:02 ` Mathieu Desnoyers
2009-06-15 21:12 ` Ingo Molnar
2009-06-15 21:22 ` Mathieu Desnoyers
2009-06-15 23:22 ` Linus Torvalds
2009-06-19 15:20 ` Ingo Molnar
2009-06-19 15:51 ` Mathieu Desnoyers
2009-06-19 16:16 ` Ingo Molnar
2009-06-16 8:42 ` Ingo Molnar
2009-06-16 15:21 ` H. Peter Anvin
2009-06-15 20:14 ` Jeremy Fitzhardinge
2009-06-15 20:27 ` Linus Torvalds
2009-06-15 20:42 ` H. Peter Anvin
2009-06-15 20:59 ` Ingo Molnar
2009-06-15 21:04 ` H. Peter Anvin
2009-06-15 21:13 ` Ingo Molnar
2009-06-15 22:39 ` Linus Torvalds
2009-06-15 21:06 ` Jeremy Fitzhardinge
2009-06-15 18:08 ` Ingo Molnar
2009-06-15 18:38 ` H. Peter Anvin
2009-06-15 18:48 ` Mathieu Desnoyers
2009-06-15 18:51 ` Peter Zijlstra
2009-06-15 18:59 ` Mathieu Desnoyers
2009-06-15 19:02 ` Peter Zijlstra
2009-06-15 19:11 ` H. Peter Anvin
2009-06-15 19:27 ` Mathieu Desnoyers
2009-06-15 19:32 ` H. Peter Anvin
2009-06-15 21:01 ` Ingo Molnar
2009-06-15 21:12 ` Mathieu Desnoyers
2009-06-15 21:16 ` Ingo Molnar
2009-06-15 21:34 ` Mathieu Desnoyers
2009-06-15 21:38 ` H. Peter Anvin
2009-06-15 21:54 ` Mathieu Desnoyers
2009-06-15 22:21 ` H. Peter Anvin
2009-06-15 22:30 ` Mathieu Desnoyers
2009-06-15 22:36 ` H. Peter Anvin
2009-06-15 22:49 ` Mathieu Desnoyers
2009-06-16 1:28 ` H. Peter Anvin
2009-06-16 3:05 ` Mathieu Desnoyers
2009-06-16 8:33 ` Ingo Molnar
2009-06-16 14:19 ` Mathieu Desnoyers
2009-06-16 15:22 ` H. Peter Anvin
2009-06-16 19:06 ` Mathieu Desnoyers
2009-06-16 20:26 ` H. Peter Anvin
2009-06-16 21:13 ` Mathieu Desnoyers
2009-06-16 22:37 ` H. Peter Anvin
2009-06-16 8:36 ` [tip:x86/urgent] x86: mm: Read cr2 before prefetching the mmap_lock tip-bot for Ingo Molnar
2009-06-16 17:54 ` Linus Torvalds
2009-06-15 19:16 ` [tip:perfcounters/core] perf_counter: x86: Fix call-chain support to use NMI-safe methods Avi Kivity
2009-06-15 19:18 ` H. Peter Anvin
2009-06-15 19:03 ` Ingo Molnar
2009-06-15 19:07 ` Ingo Molnar
2009-06-15 19:10 ` Peter Zijlstra
2009-06-15 19:21 ` Avi Kivity
2009-06-15 20:18 ` Jeremy Fitzhardinge
2009-06-15 19:59 ` Ingo Molnar
2009-06-15 14:07 ` [tip:perfcounters/core] perf report: Add per system call overhead histogram tip-bot for Ingo Molnar
2009-06-15 14:21 ` [tip:perfcounters/core] perf report: Fix 32-bit printf format tip-bot for Ingo Molnar
2009-06-16 19:54 ` [tip:sched/urgent] sched, x86: Fix cpufreq + sched_clock() TSC scaling tip-bot for Peter Zijlstra
2009-06-17 11:51 ` [tip:core/urgent] lockdep: Select frame pointers on x86 tip-bot for Peter Zijlstra
2009-06-17 14:06 ` [tip:sched/urgent] sched, x86: Fix cpufreq + sched_clock() TSC scaling tip-bot for Peter Zijlstra
2009-06-17 17:27 ` [tip:perfcounters/core] perf report: Add --sort <call> --call <$regex> tip-bot for Peter Zijlstra
2009-06-17 17:27 ` [tip:perfcounters/core] perf_counter: x86: Set the period in the intel overflow handler tip-bot for Peter Zijlstra
2009-06-17 17:27 ` [tip:perfcounters/core] perf_counter tools: Replace isprint() with issane() tip-bot for Peter Zijlstra
2009-06-18 6:09 ` [tip:perfcounters/core] perf report: Tidy up the --collapse call-chain feature tip-bot for Ingo Molnar
2009-06-18 6:27 ` [tip:perfcounters/core] perf report: Tidy up the "--parent <regex>" and "--sort parent" call-chain features tip-bot for Ingo Molnar
2009-06-18 7:21 ` [tip:perfcounters/core] perf report: Add validation of call-chain entries tip-bot for Ingo Molnar
2009-06-18 7:45 ` [tip:perfcounters/core] perf_counter tools: Add and use isprint() tip-bot for Peter Zijlstra
2009-06-18 7:48 ` tip-bot for Peter Zijlstra
2009-06-18 12:50 ` [tip:perfcounters/core] fs: Provide empty .set_page_dirty() aop for anon inodes tip-bot for Peter Zijlstra
2009-06-18 12:50 ` [tip:perfcounters/core] perf_counter: Add event overlow handling tip-bot for Peter Zijlstra
2009-06-18 12:50 ` [tip:perfcounters/core] perf_counter tools: Handle lost events tip-bot for Peter Zijlstra
2009-06-18 21:17 ` Corey Ashford
2009-06-18 13:39 ` [tip:perfcounters/core] perf report: Filter to parent set by default tip-bot for Ingo Molnar
2009-06-19 11:51 ` [tip:perfcounters/core] perf_counter: Make callchain samples extensible tip-bot for Peter Zijlstra
2009-06-19 11:52 ` [tip:perfcounters/core] perf_counter: Update userspace callchain sampling uses tip-bot for Peter Zijlstra
2009-06-19 11:52 ` [tip:perfcounters/core] perf_counter tools: Add a data file header tip-bot for Peter Zijlstra
2009-06-19 11:52 ` [tip:perfcounters/core] perf_counter: Simplify and fix task migration counting tip-bot for Peter Zijlstra
2009-06-19 11:59 ` Peter Zijlstra
2009-06-19 12:24 ` Paul Mackerras
2009-06-19 12:39 ` Peter Zijlstra
2009-06-19 12:26 ` Peter Zijlstra
2009-06-19 16:27 ` [tip:perfcounters/core] perf_counter: Close race in perf_lock_task_context() tip-bot for Peter Zijlstra
2009-06-20 11:27 ` [tip:perfcounters/core] perf_counter: Push perf_sample_data through the swcounter code tip-bot for Peter Zijlstra
2009-06-21 8:15 ` [tip:core/urgent] lockdep: Select frame pointers on x86 tip-bot for Peter Zijlstra
2009-06-21 13:09 ` [tip:perfcounters/urgent] perf_counter tools: Fix vmlinux fallback when running on a different kernel tip-bot for Ingo Molnar
2009-06-22 15:00 ` [tip:perfcounters/urgent] perf report: Output more symbol related debug data tip-bot for Peter Zijlstra
2009-06-22 15:03 ` tip-bot for Peter Zijlstra
2009-06-23 10:03 ` [tip:perfcounters/urgent] perf_counter tools: Handle overlapping MMAP events tip-bot for Peter Zijlstra
2009-06-23 10:03 ` [tip:perfcounters/urgent] perf_counter: Optimize perf_swcounter_event() tip-bot for Peter Zijlstra
2009-06-23 10:03 ` [tip:perfcounters/urgent] perf_counter: Push inherit into perf_counter_alloc() tip-bot for Peter Zijlstra
2009-06-23 10:04 ` [tip:perfcounters/urgent] perf_counter: Optimize perf_counter_alloc()'s inherit case tip-bot for Peter Zijlstra
2009-06-23 14:42 ` [tip:perfcounters/urgent] perf report: Fix help text typo tip-bot for Ingo Molnar
2009-06-25 19:42 ` [tip:perfcounters/urgent] perf_counter tools: Rework the file format tip-bot for Peter Zijlstra
2009-06-25 19:42 ` [tip:perfcounters/urgent] perf_counter: Split the mmap control page in two parts tip-bot for Peter Zijlstra
2009-06-25 19:42 ` [tip:perfcounters/urgent] perf_counter: Add scale information to the mmap control page tip-bot for Peter Zijlstra
2009-06-25 19:43 ` [tip:perfcounters/urgent] perf_counter, x86: Add mmap counter read support tip-bot for Peter Zijlstra
2009-06-25 19:43 ` [tip:perfcounters/urgent] perf_counter: Add PERF_EVENT_READ tip-bot for Peter Zijlstra
2009-06-25 19:43 ` [tip:perfcounters/urgent] perf_counter: Implement more accurate per task statistics tip-bot for Peter Zijlstra
2009-06-26 11:10 ` [RFC][PATCH] perf_counter: Complete counter swap Peter Zijlstra
2009-06-26 12:44 ` Paul Mackerras
2009-06-26 15:52 ` [tip:perfcounters/urgent] " tip-bot for Peter Zijlstra
2009-06-25 19:43 ` [tip:perfcounters/urgent] perf_counter: Rework the sample ABI tip-bot for Peter Zijlstra
2009-06-25 19:43 ` [tip:perfcounters/urgent] perf-report: Add modes for inherited stats and no-samples tip-bot for Peter Zijlstra
2009-06-25 19:44 ` [tip:perfcounters/urgent] perf-report: Add bare minimum PERF_EVENT_READ parsing tip-bot for Peter Zijlstra
2009-06-27 4:31 ` [tip:perfcounters/urgent] perf_counter tools: Remove dead code tip-bot for Ingo Molnar
2009-06-27 4:31 ` [tip:perfcounters/urgent] perf stat: Add -n/--null option to run without counters tip-bot for Ingo Molnar
2009-06-27 7:56 ` Jaswinder Singh Rajput
2009-06-27 16:52 ` Ingo Molnar
2009-06-27 4:31 ` [tip:perfcounters/urgent] perf stat: Fix multi-run stats tip-bot for Ingo Molnar
2009-06-27 4:36 ` tip-bot for Ingo Molnar
2009-06-27 8:26 ` Jaswinder Singh Rajput
2009-06-27 16:45 ` Ingo Molnar
2009-06-29 19:54 ` [tip:perfcounters/urgent] perf stat: Use percentages for scaling output tip-bot for Ingo Molnar
2009-07-01 10:55 ` [tip:perfcounters/urgent] perf_counter tools: Add more warnings and fix/annotate them tip-bot for Ingo Molnar
2009-07-03 6:27 ` [tip:perfcounters/urgent] perf_counter tools: Adjust symbols in ET_EXEC files too tip-bot for Arnaldo Carvalho de Melo
2009-07-07 12:07 ` [tip:timers/core] timekeeping: Move ktime_get() functions to timekeeping.c tip-bot for Thomas Gleixner
2009-07-09 12:04 ` [tip:timers/urgent] hrtimer: migration: always subtract base->offset tip-bot for Thomas Gleixner
2009-07-09 12:04 ` [tip:timers/urgent] hrtimer: migration: do not check expiry time on current CPU tip-bot for Thomas Gleixner
2009-07-10 10:40 ` [tip:perfcounters/core] perf_counter: Fix up P6 PMU details tip-bot for Peter Zijlstra
2009-07-10 10:40 ` [tip:perfcounters/core] perf_counter: Clean up global vs counter enable tip-bot for Peter Zijlstra
2009-07-10 10:40 ` [tip:perfcounters/core] perf_counter: Stop open coding unclone_ctx tip-bot for Peter Zijlstra
2009-07-11 9:57 ` [tip:x86/cleanups] x86/cpu: Clean up various files a bit tip-bot for Alan Cox
2009-07-11 11:00 ` Jaswinder Singh Rajput
2009-07-11 11:09 ` Jaswinder Singh Rajput
2009-07-11 14:10 ` Alan Cox
2009-07-13 6:49 ` [tip:perfcounters/core] perf_counter, x86: Extend perf_counter Pentium M support tip-bot for Daniel Qarras
2009-07-18 9:49 ` [tip:sched/urgent] sched: Account for vruntime wrapping tip-bot for Fabio Checconi
2009-07-21 12:36 ` [tip:irq/urgent] genirq: Delegate irq affinity setting to the irq thread tip-bot for Thomas Gleixner
2009-07-22 15:15 ` [tip:timers/core] hrtimer: Remove cb_entry from struct hrtimer tip-bot for Peter Zijlstra
2009-07-24 6:46 ` [tip:x86/urgent] x86: geode: Mark mfgpt irq IRQF_TIMER to prevent resume failure tip-bot for Thomas Gleixner
2009-08-01 11:22 ` [tip:perfcounters/urgent] perf_counter tools: Fix link errors with older toolchains tip-bot for Ingo Molnar
2009-08-02 13:03 ` [tip:core/locking] lockdep: Fix BFS build tip-bot for Ingo Molnar
2009-08-02 13:09 ` [tip:core/debug] debug lockups: Improve lockup detection tip-bot for Ingo Molnar
2009-08-02 17:18 ` Paul E. McKenney
2009-08-02 18:45 ` Andrew Morton
2009-08-02 19:26 ` Ingo Molnar
2009-08-02 19:39 ` Andrew Morton
2009-08-02 20:41 ` Ingo Molnar
2009-08-02 21:08 ` Andrew Morton
2009-08-03 7:59 ` Ingo Molnar
2009-08-03 8:12 ` [tip:core/debug] debug lockups: Improve lockup detection, fix generic arch fallback tip-bot for Ingo Molnar
2009-08-02 20:46 ` [tip:core/debug] debug lockups: Improve lockup detection Ingo Molnar
2009-08-02 13:10 ` [tip:perfcounters/core] perf_counter: Collapse inherit on read() tip-bot for Peter Zijlstra
2009-08-02 13:13 ` [tip:sched/core] sched: Add debug check to task_of() tip-bot for Peter Zijlstra
2009-08-02 18:36 ` [tip:core/rcu] rcu: Fix RCU & CPU hotplug hang tip-bot for Paul E. McKenney
2009-08-02 19:40 ` [tip:core/rcu] rcu: Add diagnostic check for a possible CPU-hotplug race tip-bot for Paul E. McKenney
2009-08-02 20:27 ` Ingo Molnar
2009-08-02 22:13 ` Paul E. McKenney
2009-08-03 5:15 ` Paul E. McKenney
2009-08-03 7:04 ` Ingo Molnar
2009-08-03 12:56 ` Paul E. McKenney
2009-08-06 1:26 ` Paul E. McKenney
2009-08-06 2:51 ` Gautham R Shenoy
2009-08-06 12:29 ` Ingo Molnar
2009-08-06 13:59 ` Paul E. McKenney
2009-08-08 14:57 ` [tip:core/rcu] rcu: Add second " tip-bot for Paul E. McKenney
2009-08-08 15:01 ` Ingo Molnar
2009-08-08 23:21 ` Paul E. McKenney
2009-08-09 10:54 ` tip-bot for Paul E. McKenney
2009-08-09 11:00 ` Ingo Molnar
2009-08-09 11:10 ` Ingo Molnar
2009-08-09 18:30 ` Paul E. McKenney
2009-08-09 19:23 ` Paul E. McKenney
2009-08-04 8:18 ` [tip:core/rcu] rcu: Add " Gautham R Shenoy
2009-08-04 8:20 ` Ingo Molnar
2009-08-04 11:01 ` Ingo Molnar
2009-08-04 15:37 ` Paul E. McKenney
2009-08-04 5:47 ` Gautham R Shenoy
2009-08-03 13:22 ` [tip:sched/core] sched: Add wait, sleep and iowait accounting tracepoints tip-bot for Peter Zijlstra
2009-08-03 13:24 ` Ingo Molnar
2009-08-03 14:24 ` Peter Zijlstra
2009-08-04 11:37 ` [tip:perfcounters/core] perf top: Update man page tip-bot for Mike Galbraith
2009-08-04 11:37 ` [tip:perfcounters/urgent] perf_counter tools: Provide default bfd_demangle() function in case it's not around tip-bot for Ingo Molnar
2009-08-04 16:21 ` tip-bot for Ingo Molnar
2009-08-06 12:57 ` [tip:perfcounters/urgent] perf symbol: Fix symbol parsing in certain cases: use the build-id as a symlink tip-bot for Arnaldo Carvalho de Melo
2009-08-06 18:27 ` tip-bot for Arnaldo Carvalho de Melo
2009-08-11 11:33 ` [tip:perfcounters/urgent] perf_counter, x86: Fix lapic printk message tip-bot for Ingo Molnar
2009-08-11 11:34 ` [tip:perfcounters/urgent] perf_counter, x86: Fix generic cache events on P6-mobile CPUs tip-bot for Ingo Molnar
2009-08-11 11:34 ` [tip:perfcounters/urgent] perf_counter, x86: Fix/improve apic fallback tip-bot for Ingo Molnar
2009-08-11 16:23 ` Johannes Stezenbach
2009-08-11 16:52 ` Ingo Molnar
2009-08-12 12:18 ` tip-bot for Ingo Molnar
2009-08-12 15:51 ` [tip:irq/urgent] genirq: Prevent race between free_irq() and handle_IRQ_event() tip-bot for Thomas Gleixner
2009-08-13 8:39 ` [tip:perfcounters/core] perf_counter: Provide hw_perf_counter_setup_online() APIs tip-bot for Ingo Molnar
2009-08-13 22:05 ` [tip:tracing/core] tracing: Fix syscall tracing on !HAVE_FTRACE_SYSCALLS architectures tip-bot for Ingo Molnar
2009-08-16 8:57 ` [tip:perfcounters/core] perf: Enable more compiler warnings tip-bot for Ingo Molnar
2009-08-16 12:46 ` Frederic Weisbecker
2009-08-16 14:01 ` Ingo Molnar
2009-08-16 14:06 ` Frederic Weisbecker
2009-08-16 15:22 ` Ingo Molnar
2009-08-16 12:53 ` [PATCH] perf tools: Revert the -Wswitch-enum flag Frederic Weisbecker
2009-08-16 14:15 ` [tip:perfcounters/core] perf: Enable more compiler warnings Frederic Weisbecker
2009-08-16 15:18 ` Ingo Molnar
2009-08-16 15:52 ` [PATCH] perf tools: Substract -Wformat-nonliteral from Wformat=2 in extra flags Frederic Weisbecker
2009-08-16 16:00 ` [tip:perfcounters/core] " tip-bot for Frederic Weisbecker
2009-08-16 9:18 ` [tip:perfcounters/core] perf: Build with stack-protector and with -D_FORTIFY_SOURCE=2 tip-bot for Ingo Molnar
2009-08-17 8:46 ` [tip:perfcounters/urgent] perf: Rename perf-examples.txt to examples.txt tip-bot for Carlos R. Mafra
2009-08-18 9:15 ` [tip:perfcounters/core] perf tools: Remove obsolete defines tip-bot for Ingo Molnar
2009-08-18 9:39 ` [tip:perfcounters/urgent] perf_counter: Fix the PARISC build tip-bot for Ingo Molnar
2009-08-18 12:06 ` [tip:perfcounters/urgent] perf annotate: Fix segmentation fault tip-bot for Ingo Molnar
2009-08-21 11:07 ` [tip:tracing/urgent] tracing: Fix too large stack usage in do_one_initcall() tip-bot for Ingo Molnar
2009-08-21 11:14 ` Ingo Molnar
2009-08-21 11:37 ` Peter Zijlstra
2009-08-21 11:58 ` Ingo Molnar
2009-08-21 17:48 ` Andrew Morton
2009-08-21 18:13 ` Linus Torvalds
2009-08-21 18:30 ` Steven Rostedt
2009-08-21 19:02 ` Ingo Molnar
2009-08-21 19:13 ` Linus Torvalds
2009-08-21 19:19 ` Linus Torvalds
2009-08-21 19:17 ` Ingo Molnar
2009-08-21 19:37 ` Steven Rostedt
2009-08-21 16:05 ` Linus Torvalds
2009-08-21 16:22 ` Ingo Molnar
2009-08-21 18:33 ` Arjan van de Ven
2009-08-21 19:18 ` [tip:timers/core] x86: Do not unregister PIT clocksource on PIT oneshot setup/shutdown tip-bot for Thomas Gleixner
2009-08-22 10:35 ` Ingo Molnar
2009-08-22 21:14 ` Martin Schwidefsky
2009-08-27 14:43 ` [tip:sched/clock] init: Move sched_clock_init after late_time_init tip-bot for Thomas Gleixner
2009-08-28 11:51 ` [tip:perfcounters/urgent] perf_counters: Increase paranoia level tip-bot for Ingo Molnar
2009-08-28 18:34 ` [tip:timers/core] clocksource: Resolve cpu hotplug dead lock with TSC unstable tip-bot for Thomas Gleixner
2009-08-31 8:19 ` Martin Schwidefsky
2009-08-31 14:38 ` Ingo Molnar
2009-08-31 15:59 ` Thomas Gleixner
2009-09-03 18:17 ` [boot crash] " Ingo Molnar
2009-09-03 18:21 ` Ingo Molnar
2009-09-03 18:58 ` Ingo Molnar
2009-09-08 21:43 ` john stultz
2009-09-02 6:25 ` [tip:sched/core] sched: Add wait, sleep and iowait accounting tracepoints tip-bot for Peter Zijlstra
2009-09-02 7:01 ` tip-bot for Peter Zijlstra
2009-09-02 7:15 ` tip-bot for Peter Zijlstra
2009-09-02 13:00 ` [tip:perfcounters/core] perf tools: Clean up warnings list in the Makefile tip-bot for Ingo Molnar
2009-09-02 13:00 ` [tip:perfcounters/core] perf tools: Work around strict aliasing related warnings tip-bot for Ingo Molnar
2009-09-02 19:31 ` [tip:perfcounters/core] perf trace: Sample the CPU too tip-bot for Ingo Molnar
2009-09-02 21:44 ` Frederic Weisbecker
2009-09-02 21:54 ` Ingo Molnar
2009-09-03 1:52 ` Frederic Weisbecker
2009-09-02 19:51 ` [tip:perfcounters/core] perf_counter: Introduce new (non-)paranoia level to allow raw tracepoint access tip-bot for Ingo Molnar
2009-09-03 1:11 ` Li Zefan
2009-09-03 6:47 ` Ingo Molnar
2009-09-03 6:46 ` tip-bot for Ingo Molnar
2009-09-03 11:09 ` [tip:perfcounters/core] perf trace: Sample timestamps as well tip-bot for Ingo Molnar
2009-09-03 13:48 ` tip-bot for Ingo Molnar
2009-09-03 14:27 ` [tip:perfcounters/core] perf trace: Fix parsing of perf.data tip-bot for Ingo Molnar
2009-09-03 14:27 ` [tip:perfcounters/core] perf tools: Seek to the end of the header area tip-bot for Ingo Molnar
2009-09-03 14:28 ` [tip:perfcounters/core] perf trace: Print out in nanoseconds tip-bot for Ingo Molnar
2009-09-03 14:28 ` [tip:perfcounters/core] perf trace: Fix read_string() tip-bot for Ingo Molnar
2009-09-03 16:55 ` [tip:perfcounters/core] perf_counter: Fix output-sharing error path tip-bot for Ingo Molnar
2009-09-04 10:25 ` [tip:sched/balancing] sched: Clean up topology.h tip-bot for Ingo Molnar
2009-09-04 10:25 ` [tip:sched/balancing] sched: Turn on SD_BALANCE_NEWIDLE tip-bot for Ingo Molnar
2009-09-04 10:25 ` [tip:sched/balancing] sched: Turn on SD_WAKE_IDLE for 'close' domains tip-bot for Ingo Molnar
2009-09-04 15:42 ` [tip:perfcounters/core] perf stat: Change noise calculation to use stddev tip-bot for Peter Zijlstra
2009-09-04 15:43 ` [tip:perfcounters/core] perf stat: Remove the limit on repeat tip-bot for Peter Zijlstra
2009-09-04 15:43 ` [tip:perfcounters/core] perf stat: Use stddev_mean in stead of stddev tip-bot for Peter Zijlstra
2009-09-04 15:43 ` [tip:perfcounters/core] perf stat: More advanced variance computation tip-bot for Peter Zijlstra
2009-09-04 18:34 ` [tip:perfcounters/core] perf stat: Clean up statistics calculations a bit more tip-bot for Peter Zijlstra
2009-09-07 20:37 ` [tip:sched/balancing] sched: Remove short cut from select_task_rq_fair() tip-bot for Peter Zijlstra
2009-09-07 20:37 ` [tip:sched/balancing] sched: Deal with low-load in wake_affine() tip-bot for Peter Zijlstra
2009-09-07 20:37 ` [tip:sched/balancing] sched: enable SD_WAKE_IDLE tip-bot for Peter Zijlstra
2009-09-08 11:19 ` [tip:sched/core] sched: Ensure that a child can't gain time over it's parent after fork() tip-bot for Mike Galbraith
2009-09-08 11:49 ` Ingo Molnar
2009-09-08 11:53 ` Jens Axboe
2009-09-08 12:42 ` Mike Galbraith
2009-09-14 20:04 ` [tip:timers/core] clocksource: clocksource_select must be called with mutex locked tip-bot for Thomas Gleixner
2009-09-14 20:04 ` [tip:timers/core] clocksource: Delay clocksource down rating to late boot tip-bot for Thomas Gleixner
2009-09-15 8:22 ` [tip:timers/core] time: Prevent 32 bit overflow with set_normalized_timespec() tip-bot for Thomas Gleixner
2009-09-15 9:30 ` [tip:perfcounters/core] perf: Add 'perf sched' tool tip-bot for Ingo Molnar
2009-09-15 9:30 ` [tip:perfcounters/core] perf sched: Import schedbench.c tip-bot for Ingo Molnar
2009-09-15 9:31 ` [tip:perfcounters/core] perf sched: Implement the scheduling workload replay engine tip-bot for Ingo Molnar
2009-09-15 9:31 ` [tip:perfcounters/core] perf sched: Tighten up the code tip-bot for Ingo Molnar
2009-09-15 9:32 ` [tip:perfcounters/core] perf sched: Clean up latency and replay sub-commands tip-bot for Ingo Molnar
2009-09-15 9:32 ` [tip:perfcounters/core] perf sched: Display time in milliseconds, reorganize output tip-bot for Ingo Molnar
2009-09-15 9:32 ` [tip:perfcounters/core] perf sched: Add runtime stats tip-bot for Ingo Molnar
2009-09-15 9:33 ` [tip:perfcounters/core] perf sched: Output runtime and context switch totals tip-bot for Ingo Molnar
2009-09-15 9:34 ` [tip:perfcounters/core] perf sched: Add 'perf sched latency' and 'perf sched replay' tip-bot for Ingo Molnar
2009-09-15 9:34 ` [tip:perfcounters/core] perf sched: Finish latency => atom rename and misc cleanups tip-bot for Ingo Molnar
2009-09-15 9:34 ` [tip:perfcounters/core] perf sched: Clean up PID sorting logic tip-bot for Ingo Molnar
2009-09-15 9:35 ` [tip:perfcounters/core] perf_counter: Allow mmap if paranoid checks are turned off tip-bot for Ingo Molnar
2009-09-15 9:35 ` [tip:perfcounters/core] perf sched: Add 'perf sched trace', improve documentation tip-bot for Ingo Molnar
2009-09-15 9:35 ` [tip:perfcounters/core] perf_counter, sched: Add sched_stat_runtime tracepoint tip-bot for Ingo Molnar
2009-09-15 9:36 ` [tip:perfcounters/core] perf tools: Implement counter output multiplexing tip-bot for Ingo Molnar
2009-09-15 9:36 ` [tip:perfcounters/core] perf sched: Fix 'perf sched latency' output on 32-bit systems tip-bot for Ingo Molnar
2009-09-15 9:36 ` [tip:perfcounters/core] perf sched: Print PIDs too tip-bot for mingo
2009-09-15 9:36 ` [tip:perfcounters/core] perf sched: Add support for sched:sched_stat_runtime events tip-bot for mingo
2009-09-16 10:19 ` [tip:sched/core] sched: Fix double_rq_lock() compile warning tip-bot for Peter Zijlstra
2009-09-16 10:19 ` [tip:sched/core] sched: Split WAKEUP_OVERLAP tip-bot for Peter Zijlstra
2009-09-16 10:19 ` [tip:sched/core] sched: Complete buddy switches tip-bot for Mike Galbraith
2009-09-16 10:19 ` [tip:sched/core] sched: Add come comments to the sched features tip-bot for Peter Zijlstra
2009-09-16 10:19 ` [tip:sched/core] sched: Move code around tip-bot for Peter Zijlstra
2009-09-16 10:20 ` [tip:sched/core] sched: Move sched_balance_self() into sched_fair.c tip-bot for Peter Zijlstra
2009-09-16 10:20 ` [tip:sched/core] sched: Hook sched_balance_self() into sched_class::select_task_rq() tip-bot for Peter Zijlstra
2009-09-16 10:20 ` [tip:sched/core] sched: Add TASK_WAKING tip-bot for Peter Zijlstra
2009-09-16 10:20 ` [tip:sched/core] sched: Merge select_task_rq_fair() and sched_balance_self() tip-bot for Peter Zijlstra
2009-09-16 10:21 ` [tip:sched/core] sched: Weaken SD_POWERSAVINGS_BALANCE tip-bot for Peter Zijlstra
2009-09-16 10:21 ` [tip:sched/core] sched: for_each_domain() vs RCU tip-bot for Peter Zijlstra
2009-09-16 10:21 ` [tip:sched/core] sched: Fix task affinity for select_task_rq_fair tip-bot for Peter Zijlstra
2009-09-16 10:21 ` [tip:sched/core] sched: Tweak wake_idx tip-bot for Peter Zijlstra
2009-09-16 10:21 ` [tip:sched/core] sched: Fix some domain tunings tip-bot for Peter Zijlstra
2009-09-16 10:22 ` [tip:sched/core] sched: Reduce forkexec_idx tip-bot for Peter Zijlstra
2009-09-16 10:22 ` [tip:sched/core] sched: Provide arch_scale_freq_power tip-bot for Peter Zijlstra
2009-09-16 10:22 ` [tip:sched/core] x86: Move APERF/MPERF into a X86_FEATURE tip-bot for Peter Zijlstra
2009-09-16 10:23 ` [tip:sched/core] x86: Add generic aperf/mperf code tip-bot for Peter Zijlstra
2009-09-16 10:23 ` [tip:sched/core] x86: sched: Provide arch implementations using aperf/mperf tip-bot for Peter Zijlstra
2009-09-16 10:23 ` [tip:sched/core] sched: Feature to disable APERF/MPERF cpu_power tip-bot for Peter Zijlstra
2009-09-16 10:23 ` [tip:sched/core] sched: Rename select_task_rq() argument tip-bot for Peter Zijlstra
2009-09-16 10:24 ` [tip:sched/core] sched: Rename sync arguments tip-bot for Peter Zijlstra
2009-09-16 10:24 ` [tip:sched/core] sched: Add WF_FORK tip-bot for Peter Zijlstra
2009-09-16 10:24 ` [tip:sched/core] sched: Fix sync wakeups again tip-bot for Peter Zijlstra
2009-09-16 10:24 ` [tip:sched/core] sched: Add a few SYNC hint knobs to play with tip-bot for Peter Zijlstra
2009-09-16 10:24 ` [tip:sched/core] sched: Add SD_PREFER_LOCAL tip-bot for Peter Zijlstra
2009-09-16 10:25 ` [tip:sched/core] sched: Implement a gentler fair-sleepers feature tip-bot for Ingo Molnar
2009-09-16 10:25 ` [tip:sched/core] sched: x86: Name old_perf in a unique way tip-bot for Peter Zijlstra
2009-09-16 10:25 ` [tip:perfcounters/core] perf sched: Account for lost events, increase default buffering tip-bot for Ingo Molnar
2009-09-16 10:25 ` [tip:perfcounters/core] perf sched: Sanity check context switch events tip-bot for Ingo Molnar
2009-09-16 10:25 ` [tip:perfcounters/core] perf sched: Make idle thread and comm/pid names more consistent tip-bot for Ingo Molnar
2009-09-16 12:36 ` [tip:x86/platform] x86: Move get/set_wallclock to x86_platform_ops tip-bot for Feng Tang
2009-09-16 14:45 ` [tip:perfcounters/core] perf sched: Add 'perf sched map' scheduling event map printout tip-bot for Ingo Molnar
2009-09-16 15:09 ` [tip:sched/core] sched: Optimize cgroup vs wakeup a bit tip-bot for Peter Zijlstra
2009-09-16 15:09 ` [tip:sched/core] sched: Clean up the load_idx selection in select_task_rq_fair tip-bot for Peter Zijlstra
2009-09-16 15:10 ` [tip:sched/core] sched: Rename flags to wake_flags tip-bot for Peter Zijlstra
2009-09-16 15:10 ` [tip:sched/core] sched: Disable wakeup balancing tip-bot for Peter Zijlstra
2009-09-16 18:50 ` Peter Zijlstra
2009-09-16 19:13 ` [tip:sched/core] sched: Fix TASK_WAKING & loadaverage breakage tip-bot for Ingo Molnar
2009-09-16 19:15 ` tip-bot for Ingo Molnar
2009-09-17 7:48 ` [tip:sched/core] sched: Add new wakeup preemption mode: WAKEUP_RUNNING tip-bot for Peter Zijlstra
2009-09-17 7:49 ` [tip:sched/core] sched: Fix TASK_WAKING & loadaverage breakage tip-bot for Ingo Molnar
2009-09-17 7:54 ` tip-bot for Ingo Molnar
2009-09-17 7:54 ` [tip:sched/core] sched: Add new wakeup preemption mode: WAKEUP_RUNNING, disable FAIR_SLEEPERS tip-bot for Peter Zijlstra
2009-09-17 8:12 ` [tip:sched/core] sched: Add new wakeup preemption mode: WAKEUP_RUNNING tip-bot for Peter Zijlstra
2009-09-17 8:18 ` tip-bot for Peter Zijlstra
2009-09-17 8:54 ` [tip:sched/core] sched: Stop buddies from hogging the system tip-bot for Peter Zijlstra
2009-09-17 8:54 ` [tip:sched/core] sched: Fix SD_POWERSAVING_BALANCE|SD_PREFER_LOCAL vs SD_WAKE_AFFINE tip-bot for Peter Zijlstra
2009-09-17 18:07 ` [tip:perfcounters/core] perf sched: Determine the number of CPUs automatically tip-bot for Ingo Molnar
2009-09-17 19:34 ` Arjan van de Ven
2009-09-17 19:45 ` Ingo Molnar
2009-09-17 20:09 ` Ingo Molnar
2009-09-17 18:07 ` [tip:perfcounters/core] perf_counter: Do not throttle single swcounter events tip-bot for Peter Zijlstra
2009-09-17 18:07 ` [tip:perfcounters/core] perf_counter: Allow for a wakeup watermark tip-bot for Peter Zijlstra
2009-09-17 18:07 ` [tip:perfcounters/core] perf record: Disable profiling before draining the buffer tip-bot for Peter Zijlstra
2009-09-17 20:12 ` [tip:perfcounters/core] perf_counter: Do not throttle single swcounter events tip-bot for Peter Zijlstra
2009-09-17 20:13 ` [tip:perfcounters/core] perf_counter: Allow for a wakeup watermark tip-bot for Peter Zijlstra
2009-09-17 20:13 ` [tip:perfcounters/core] perf record: Disable profiling before draining the buffer tip-bot for Peter Zijlstra
2009-09-17 20:13 ` [tip:perfcounters/core] perf sched: Determine the number of CPUs automatically tip-bot for Ingo Molnar
2009-09-18 19:18 ` [tip:perfcounters/core] perf_counter: Fix up swcounter throttling tip-bot for Peter Zijlstra
2009-09-18 19:19 ` [tip:perfcounters/core] sched_clock: Make it NMI safe tip-bot for Peter Zijlstra
2009-09-19 15:16 ` [tip:sched/urgent] sched: Re-add lost cpu_allowed check to sched_fair.c::select_task_rq_fair() tip-bot for Mike Galbraith
2009-09-21 12:52 ` [tip:perfcounters/rename] perf_counter: Rename list_entry -> group_entry, counter_list -> group_list tip-bot for Ingo Molnar
2009-09-21 12:52 ` [tip:perfcounters/rename] perf_counter: Rename 'event' to event_id/hw_event tip-bot for Ingo Molnar
2009-09-21 12:53 ` [tip:perfcounters/rename] perf: Tidy up after the big rename tip-bot for Ingo Molnar
2009-09-22 13:34 ` [tip:core/printk] ratelimit: Use per ratelimit context locking tip-bot for Ingo Molnar
2009-09-22 13:34 ` [tip:core/printk] ratelimit: Fix/allow use in atomic contexts tip-bot for Ingo Molnar
2009-09-22 14:46 ` Linus Torvalds
2009-09-22 13:34 ` [tip:perf/urgent] perf stat: Fix zero total printouts tip-bot for Ingo Molnar
2009-09-22 13:34 ` [tip:x86/urgent] x86: mce: Clean up thermal throttling state tracking code tip-bot for Ingo Molnar
2009-09-22 13:34 ` [tip:x86/urgent] x86: mce: Fix thermal throttling message storm tip-bot for Ingo Molnar
2009-09-22 14:26 ` [tip:core/printk] printk: Remove ratelimit.h from kernel.h tip-bot for Ingo Molnar
2009-09-25 8:49 ` [tip:perf/urgent] perf_event: Provide vmalloc() based mmap() backing tip-bot for Peter Zijlstra
2009-10-04 7:54 ` [tip:core/futexes] futex: Fix locking imbalance tip-bot for Thomas Gleixner
2009-10-04 15:48 ` [tip:core/urgent] " tip-bot for Thomas Gleixner
2009-10-05 19:11 ` tip-bot for Thomas Gleixner
2009-10-06 13:18 ` [tip:perf/core] perf tools: Default to 1 KHz auto-sampling freq events tip-bot for Ingo Molnar
2009-10-06 13:42 ` tip-bot for Ingo Molnar
2009-10-06 15:03 ` [tip:core/urgent] futex: Nullify robust lists after cleanup tip-bot for Peter Zijlstra
2009-10-06 15:54 ` Anirban Sinha
2009-10-06 15:03 ` [tip:core/urgent] futex: Move exit_pi_state() call to release_mm() tip-bot for Thomas Gleixner
2009-10-12 7:13 ` [tip:perf/core] perf sched: Add -C option to measure on a specific CPU tip-bot for Mike Galbraith
2009-10-13 19:04 ` [tip:core/urgent] futex: Handle spurious wake up tip-bot for Thomas Gleixner
2009-10-15 10:46 ` [tip:perf/core] events: Harmonize event field names and print output names tip-bot for Ingo Molnar
2009-10-16 8:40 ` [tip:perf/urgent] perf tools: Bump version to 0.0.2 tip-bot for Ingo Molnar
2009-10-24 1:04 ` [tip:branch?] sched: Strengthen buddies and mitigate buddy induced latencies tip-bot for Mike Galbraith
2009-11-02 9:30 ` [tip:x86/urgent] x86: Fix printk message typo in mtrr cleanup code tip-bot for Dave Jones
2009-11-02 19:45 ` [tip:sched/urgent] sched: Disable SD_PREFER_LOCAL at node level tip-bot for Mike Galbraith
2009-11-03 7:03 ` tip-bot for Mike Galbraith
2009-11-04 19:33 ` [tip:sched/core] sched: Rate-limit newidle tip-bot for Mike Galbraith
2009-11-12 11:33 ` [tip:sched/urgent] sched: Fix/add missing update_rq_clock() calls tip-bot for Mike Galbraith
2009-11-13 19:49 ` [tip:timers/core] nohz: Type cast printk argument tip-bot for Thomas Gleixner
2009-11-13 19:50 ` [tip:timers/core] nohz: Track last do_timer() cpu tip-bot for Thomas Gleixner
2009-11-17 17:18 ` [tip:perf/urgent] perf annotate: Allocate history size correctly tip-bot for Nick Piggin
2009-11-23 7:15 ` [tip:tracing/core] ring-buffer benchmark: Run producer/consumer threads at nice +19 tip-bot for Ingo Molnar
2009-11-24 14:16 ` Steven Rostedt
2009-11-24 14:20 ` Steven Rostedt
2009-11-24 14:39 ` Ingo Molnar
2009-11-24 15:01 ` Steven Rostedt
2009-11-24 15:22 ` Ingo Molnar
2009-11-24 15:40 ` Steven Rostedt
2009-11-23 11:52 ` [tip:perf/core] perf events: Do not generate function trace entries in perf code tip-bot for Ingo Molnar
2009-11-23 11:53 ` [tip:tracing/core] tracing, function tracer: Clean up strstrip() usage tip-bot for Ingo Molnar
2009-11-24 14:15 ` Steven Rostedt
2009-11-23 11:53 ` [tip:perf/core] perf_events: Optimize the swcounter hotpath tip-bot for Ingo Molnar
2009-11-26 8:15 ` [tip:x86/debug] x86: dumpstack: Clean up the x86_stack_ids[][] initalization and other details tip-bot for Ingo Molnar
2009-11-30 8:23 ` [tip:perf/scripting] perf scripting: Fix build tip-bot for Ingo Molnar
2009-12-06 20:27 ` [tip:sched/urgent] sched: Fix balance vs hotplug race tip-bot for Peter Zijlstra
2009-12-09 9:53 ` [tip:sched/urgent] sched: Remove sysctl.sched_features tip-bot for Peter Zijlstra
2009-12-09 9:53 ` [tip:sched/urgent] sched: Consolidate select_task_rq() callers tip-bot for Peter Zijlstra
2009-12-09 9:53 ` [tip:sched/urgent] sched: Remove rq->clock coupling from set_task_cpu() tip-bot for Peter Zijlstra
2009-12-09 9:54 ` [tip:sched/urgent] sched: Clean up ttwu() rq locking tip-bot for Peter Zijlstra
2009-12-09 9:54 ` [tip:sched/urgent] sched: Sanitize fork() handling tip-bot for Peter Zijlstra
2009-12-09 9:54 ` [tip:sched/urgent] sched: Clean up check_preempt_wakeup() tip-bot for Peter Zijlstra
2009-12-09 9:55 ` [tip:sched/urgent] sched: Discard some old bits tip-bot for Peter Zijlstra
2009-12-09 9:55 ` [tip:sched/urgent] sched: Remove unnecessary RCU exclusion tip-bot for Peter Zijlstra
2009-12-10 8:43 ` [tip:sched/urgent] sched: Fix build warning in get_update_sysctl_factor() tip-bot for Mike Galbraith
2009-12-10 19:36 ` [tip:sched/urgent] sched: Remove forced2_migrations stats tip-bot for Ingo Molnar
2009-12-15 9:27 ` [tip:perf/diff] perf diff: Improve the help text tip-bot for Ingo Molnar
2009-12-15 14:30 ` tip-bot for Ingo Molnar
2009-12-28 10:07 ` [tip:perf/core] perf events: Remove arg from perf sched hooks tip-bot for Peter Zijlstra
2010-01-21 13:52 ` tip-bot for Peter Zijlstra [this message]
2010-01-21 13:52 ` [tip:sched/core] sched: Remove the sched_class load_balance methods tip-bot for Peter Zijlstra
2010-01-21 13:52 ` [tip:sched/core] sched: Remove rq_iterator usage from load_balance_fair tip-bot for Peter Zijlstra
2010-01-21 13:52 ` [tip:sched/core] sched: Remove rq_iterator from move_one_task tip-bot for Peter Zijlstra
2010-01-21 13:53 ` [tip:sched/core] sched: Remove from fwd decls tip-bot for Peter Zijlstra
2010-01-21 13:53 ` [tip:sched/core] sched: Add a lock break for PREEMPT=y tip-bot for Peter Zijlstra
2010-01-21 13:53 ` [tip:sched/core] sched: Unify load_balance{,_newidle}() tip-bot for Peter Zijlstra
2010-01-21 13:53 ` [tip:sched/core] sched: Remove load_balance_newidle() tip-bot for Peter Zijlstra
2010-01-21 13:54 ` [tip:sched/core] sched: Assume *balance is valid tip-bot for Peter Zijlstra
2010-01-21 13:55 ` [tip:perf/urgent] perf: Change the is_software_event() definition tip-bot for Peter Zijlstra
2010-01-27 13:16 ` [tip:perf/core] perf: Reimplement frequency driven sampling tip-bot for Peter Zijlstra
2010-01-29 9:29 ` [tip:perf/core] perf_event: x86: Optimize x86_pmu_disable() tip-bot for Peter Zijlstra
2010-01-29 9:29 ` [tip:perf/core] perf, x86: Clean up event constraints code a bit tip-bot for Ingo Molnar
2010-01-29 9:29 ` [tip:perf/core] perf_event: x86: Deduplicate the disable code tip-bot for Peter Zijlstra
2010-01-31 8:30 ` [tip:perf/core] Revert "perf record: Intercept all events" tip-bot for Hitoshi Mitake
2010-02-04 9:52 ` [tip:x86/debug] x86_64: Print modules like i386 does tip-bot for Alexey Dobriyan
2010-02-04 9:56 ` [tip:perf/core] perf_events: Optimize perf_event_task_tick() tip-bot for Peter Zijlstra
2010-02-04 9:56 ` [tip:perf/core] perf_events, x86: Implement intel core solo/duo support tip-bot for Peter Zijlstra
2010-02-04 9:57 ` [tip:perf/core] bitops: Ensure the compile time HWEIGHT is only used for such tip-bot for Peter Zijlstra
2010-02-04 10:27 ` [PATCH] bitops: Optimize hweight() by making use of compile-time evaluation Peter Zijlstra
2010-02-26 10:24 ` [tip:perf/core] perf_events: Report the MMAP pgoff value in bytes tip-bot for Peter Zijlstra
2010-02-26 10:25 ` [tip:perf/core] perf_events, x86: Remove superflous MSR writes tip-bot for Peter Zijlstra
2010-02-26 14:54 ` [tip:perf/core] perf_events, x86: Split PMU definitions into separate files tip-bot for Peter Zijlstra
2010-03-02 14:30 ` [tip:perf/nmi] nmi_watchdog: Tell the world we're active tip-bot for Peter Zijlstra
2010-03-02 14:30 ` [tip:perf/core] perf, x86: Restrict the ANY flag tip-bot for Peter Zijlstra
2010-03-02 14:31 ` [tip:perf/core] perf_events, x86: Fixup fixed counter constraints tip-bot for Peter Zijlstra
2010-03-02 16:26 ` Stephane Eranian
2010-03-02 17:54 ` Peter Zijlstra
2010-03-03 6:16 ` Stephane Eranian
2010-03-09 8:21 ` [tip:perf/urgent] MAINTAINERS: Add Arnaldo as tools/perf/ co-maintainer tip-bot for Ingo Molnar
2010-03-10 13:10 ` [tip:perf/urgent] perf: Optimize perf_disable tip-bot for Peter Zijlstra
2010-03-10 13:10 ` [tip:perf/urgent] perf, x86, Do not user perf_disable from NMI context tip-bot for Peter Zijlstra
2010-03-10 13:12 ` [tip:perf/urgent] perf, x86: Fix x86_pmu_start tip-bot for Peter Zijlstra
2010-03-10 13:12 ` [tip:perf/urgent] perf, x86: Avoid double disable on throttle vs ioctl(PERF_IOC_DISABLE) tip-bot for Peter Zijlstra
2010-03-10 13:12 ` [tip:perf/urgent] perf, x86: Properly account n_added tip-bot for Peter Zijlstra
2010-03-10 13:12 ` [tip:perf/urgent] perf, x86: Fix double disable calls tip-bot for Peter Zijlstra
2010-03-10 13:13 ` [tip:perf/urgent] perf, x86: Fix double enable calls tip-bot for Peter Zijlstra
2010-03-10 13:13 ` [tip:perf/urgent] perf: Provide better condition for event rotation tip-bot for Peter Zijlstra
2010-03-10 13:22 ` [tip:perf/pebs] perf, x86: Avoid double disable on throttle vs ioctl(PERF_IOC_DISABLE) tip-bot for Peter Zijlstra
2010-03-10 13:22 ` [tip:perf/pebs] perf, x86: Fix pebs drains tip-bot for Peter Zijlstra
2010-03-10 13:22 ` [tip:perf/pebs] perf, x86: Fix PEBS enable/disable vs cpuc->enabled tip-bot for Peter Zijlstra
2010-03-10 13:22 ` [tip:perf/pebs] perf, x86: Fix LBR " tip-bot for Peter Zijlstra
2010-03-10 13:23 ` [tip:perf/pebs] perf, x86: Reorder intel_pmu_enable_all() tip-bot for Peter Zijlstra
2010-03-10 13:23 ` [tip:perf/pebs] perf, x86: Deal with multiple state bits for pebs-fmt1 tip-bot for Peter Zijlstra
2010-03-10 13:23 ` [tip:perf/pebs] perf, x86: Fix silly bug in intel_pmu_pebs_{enable,disable} tip-bot for Peter Zijlstra
2010-03-10 13:23 ` [tip:perf/pebs] perf, x86: Don't reset the LBR as frequently tip-bot for Peter Zijlstra
2010-03-10 13:24 ` [tip:perf/pebs] perf, x86: Remove checking_{wr,rd}msr() usage tip-bot for Peter Zijlstra
2010-03-10 13:24 ` [tip:perf/pebs] perf, x86: Fixup the PEBS handler for Core2 cpus tip-bot for Peter Zijlstra
2010-03-10 13:24 ` [tip:perf/pebs] perf, x86: Fix LBR read-out tip-bot for Peter Zijlstra
2010-03-10 13:25 ` [tip:perf/pebs] perf, x86: Add INSTRUCTION_DECODER config flag tip-bot for Ingo Molnar
2010-03-10 13:25 ` [tip:perf/pebs] perf, x86: Fix the !CONFIG_CPU_SUP_INTEL build tip-bot for Ingo Molnar
2010-03-11 14:41 ` [tip:perf/urgent] perf, ppc: Fix compile error due to new cpu notifiers tip-bot for Peter Zijlstra
2010-03-11 14:41 ` [tip:sched/core] sched: Fix pick_next_highest_task_rt() for cgroups tip-bot for Peter Zijlstra
2010-04-02 19:10 ` [tip:perf/core] perf, x86: Fix __initconst vs const tip-bot for Peter Zijlstra
2010-04-02 19:10 ` [tip:perf/core] perf, x86: Add Nehalem programming quirk to Westmere tip-bot for Peter Zijlstra
2010-04-02 19:13 ` [tip:sched/core] sched: Fix TASK_WAKING vs fork deadlock tip-bot for Peter Zijlstra
2010-04-02 19:13 ` [tip:sched/core] sched: Optimize task_rq_lock() tip-bot for Peter Zijlstra
2010-04-02 19:13 ` [tip:sched/core] sched: Fix nr_uninterruptible count tip-bot for Peter Zijlstra
2010-04-02 19:14 ` [tip:sched/core] sched: Add enqueue/dequeue flags tip-bot for Peter Zijlstra
2010-04-23 10:50 ` [tip:sched/core] sched: Pre-compute cpumask_weight(sched_domain_span(sd)) tip-bot for Peter Zijlstra
2010-05-07 18:41 ` [tip:perf/core] perf: Annotate perf_event_read_group() vs perf_event_release_kernel() tip-bot for Peter Zijlstra
2010-05-07 18:43 ` [tip:perf/core] perf, x86: Remove PEBS SAMPLE_RAW support tip-bot for Peter Zijlstra
2010-05-07 18:43 ` [tip:perf/core] perf, x86: Consolidate some code repetition tip-bot for Peter Zijlstra
2010-05-07 18:44 ` [tip:perf/core] perf, x86: Improve the PEBS ABI tip-bot for Peter Zijlstra
2010-05-11 7:24 ` [tip:perf/core] Revert "perf: Fix exit() vs PERF_FORMAT_GROUP" tip-bot for Ingo Molnar
2010-05-17 21:09 ` [tip:perf/core] perf symbols: symbol inconsistency message should be done only at verbose=1 tip-bot for Arnaldo Carvalho de Melo
2010-05-17 22:33 ` [tip:perf/core] perf tools: Add mode to build without newt support tip-bot for Arnaldo Carvalho de Melo
2010-05-18 17:15 ` [tip:perf/core] perf/ftrace: Optimize perf/tracepoint interaction for single events tip-bot for Peter Zijlstra
2010-05-19 7:58 ` Frederic Weisbecker
2010-05-19 8:18 ` Peter Zijlstra
2010-05-19 8:23 ` Frederic Weisbecker
2010-05-19 8:31 ` Peter Zijlstra
2010-05-19 8:58 ` Peter Zijlstra
2010-05-19 9:06 ` Frederic Weisbecker
2010-05-19 9:12 ` Peter Zijlstra
2010-05-19 9:13 ` Frederic Weisbecker
2010-05-21 11:27 ` [tip:perf/core] perf, trace: Optimize tracepoints by removing IRQ-disable from perf/tracepoint interaction tip-bot for Peter Zijlstra
2010-05-18 17:16 ` [tip:perf/core] perf: Disallow mmap() on per-task inherited events tip-bot for Peter Zijlstra
2010-05-18 17:16 ` [tip:perf/core] perf: Optimize the perf_output() path by removing IRQ-disables tip-bot for Peter Zijlstra
2010-05-18 17:17 ` [tip:perf/core] perf: Optimize the hotpath by converting the perf output buffer to local_t tip-bot for Peter Zijlstra
2010-05-18 17:17 ` [tip:perf/core] perf: Optimize perf_output_*() by avoiding local_xchg() tip-bot for Peter Zijlstra
2010-05-31 7:19 ` [tip:perf/urgent] perf_events: Fix races and clean up perf_event and perf_mmap_data interaction tip-bot for Peter Zijlstra
2010-05-31 7:19 ` [tip:perf/urgent] perf_events: Fix races in group composition tip-bot for Peter Zijlstra
2010-06-08 20:55 ` [tip:perf/core] perf: Fix signed comparison in perf_adjust_period() tip-bot for Peter Zijlstra
2010-06-08 20:55 ` [tip:sched/core] sched: Fix PROVE_RCU vs cpu_cgroup tip-bot for Peter Zijlstra
2010-06-08 20:55 ` [tip:perf/core] perf, x86: Small fix to cpuid10_edx tip-bot for Livio Soares
2010-06-09 10:14 ` [tip:perf/core] perf, trace: Inline perf_swevent_put_recursion_context() tip-bot for Peter Zijlstra
2010-06-09 10:15 ` [tip:perf/core] perf, trace: Remove superfluous rcu_read_lock() tip-bot for Peter Zijlstra
2010-06-09 10:16 ` [tip:perf/core] perf: Rename perf_mmap_data to perf_buffer tip-bot for Peter Zijlstra
2010-06-09 10:16 ` [tip:perf/core] perf: Simplify the ring-buffer logic: make perf_buffer_alloc() do everything needed tip-bot for Peter Zijlstra
2010-06-09 10:17 ` [tip:perf/core] arch: Implement local64_t tip-bot for Peter Zijlstra
2010-06-09 10:17 ` [tip:perf/core] perf: Add perf_event_count() tip-bot for Peter Zijlstra
2010-06-09 10:17 ` [tip:perf/core] perf: Add perf_event::child_count tip-bot for Peter Zijlstra
2010-06-09 10:18 ` [tip:perf/core] perf: Convert perf_event to local_t tip-bot for Peter Zijlstra
2010-06-09 10:18 ` [tip:perf/core] perf: Fix build breakage for architecutes without atomic64_t tip-bot for Peter Zijlstra
2010-07-17 11:12 ` [tip:sched/urgent] sched: Revert nohz_ratelimit() for now tip-bot for Peter Zijlstra
2010-07-18 10:33 ` [tip:perf/core] perf ui: Make END go to the last entry, not the top of the last page tip-bot for Arnaldo Carvalho de Melo
2010-07-18 10:34 ` [tip:perf/core] perf hists: Factor out duplicated code tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:49 ` [tip:perf/core] perf sort: Make column width code per hists instance tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:49 ` [tip:perf/core] perf ui: Restore SPACE as an alias to PGDN in annotate tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:49 ` [tip:perf/core] perf hist: Introduce routine to measure lenght of formatted entry tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:50 ` [tip:perf/core] perf ui: Consider the refreshed dimensions in ui_browser__show tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:50 ` [tip:perf/core] perf ui: Show the scroll bar over the left window frame tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:50 ` [tip:perf/core] perf ui: New hists tree widget tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:51 ` [tip:perf/core] perf report: Don't abbreviate file paths relative to the cwd tip-bot for Dave Martin
2010-08-02 7:51 ` [tip:perf/core] perf tools: Remove unneeded code for tracking the cwd in perf sessions tip-bot for Dave Martin
2010-08-02 7:51 ` [tip:perf/core] perf man pages: Fix cut'n'paste error tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:52 ` [tip:perf/core] perf record: Release resources at exit tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:52 ` [tip:perf/core] perf symbols: Precisely specify if dso->{long,short}_name should be freed tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:52 ` [tip:perf/core] perf tools: Factor out buildid reading and make it implicit in dso__load tip-bot for Dave Martin
2010-08-02 7:52 ` [tip:perf/core] perf tools: remove extra build-id check factored into dso__load tip-bot for Dave Martin
2010-08-02 7:53 ` [tip:perf/core] perf symbols: Improve debug image search when loading symbols tip-bot for Dave Martin
2010-08-02 7:53 ` [tip:perf/core] perf tui: Make CTRL+Z suspend perf tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:54 ` [tip:perf/core] perf tools: Release thread resources on PERF_RECORD_EXIT tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:54 ` [tip:perf/core] perf tools: Release session and symbol resources on exit tip-bot for Arnaldo Carvalho de Melo
2010-08-03 5:54 ` [tip:perf/core] perf session: Free the ref_reloc_sym memory at the right place tip-bot for Arnaldo Carvalho de Melo
2010-08-03 5:54 ` [tip:perf/core] perf session: Invalidate last_match when removing threads from rb_tree tip-bot for Arnaldo Carvalho de Melo
2010-08-03 5:55 ` [tip:perf/core] perf tools: Don't keep unreferenced maps when unmaps are detected tip-bot for Arnaldo Carvalho de Melo
2010-08-06 17:04 ` [tip:perf/core] perf symbols: Store the symbol binding tip-bot for Arnaldo Carvalho de Melo
2010-08-06 17:04 ` [tip:perf/core] perf ui: Add a map browser tip-bot for Arnaldo Carvalho de Melo
2010-08-06 17:04 ` [tip:perf/core] perf ui: Shorten ui_browser->refresh_entries to refresh tip-bot for Arnaldo Carvalho de Melo
2010-08-06 17:05 ` [tip:perf/core] perf hists: Handle verbose in hists__sort_list_width tip-bot for Arnaldo Carvalho de Melo
2010-08-06 17:05 ` [tip:perf/core] perf hists: Fixup addr snprintf width on 32 bit arches tip-bot for Arnaldo Carvalho de Melo
2010-08-06 17:05 ` [tip:perf/core] perf ui: Add search by name/addr to the map__browser tip-bot for Arnaldo Carvalho de Melo
2010-08-06 17:06 ` [tip:perf/core] perf report: Speed up exit path tip-bot for Arnaldo Carvalho de Melo
2010-08-07 7:01 ` [tip:perf/core] perf tui: Introduce list_head based generic ui_browser refresh routine tip-bot for Arnaldo Carvalho de Melo
2010-08-07 7:01 ` [tip:perf/core] perf ui: Start breaking down newt.c into multiple files tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:39 ` [tip:perf/core] perf ui: Shorten ui_browser member names tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:40 ` [tip:perf/core] perf ui: Move ui_helpline routines to separate file in util/ui/ tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:40 ` [tip:perf/core] perf ui: Move ui_progress " tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:40 ` [tip:perf/core] perf ui: Move annotate browser to util/ui/browsers/ tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:41 ` [tip:perf/core] perf ui: Move map " tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:41 ` [tip:perf/core] perf ui: Move hists " tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:42 ` [tip:perf/core] perf ui: Complete the breakdown of util/newt.c tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:42 ` [tip:perf/core] perf annotate: Sort by hottest lines in the TUI tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:42 ` [tip:perf/core] perf ui: Make SPACE work as PGDN in all browsers tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:43 ` [tip:perf/core] perf annotate: Cycle thru sorted lines with samples tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:43 ` [tip:perf/core] perf ui browser: Add ui_browser__show counterpart: __hide tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:43 ` [tip:perf/core] perf ui hist browser: Fixup key bindings tip-bot for Arnaldo Carvalho de Melo
2010-08-12 20:03 ` [tip:perf/urgent] perf: Add back list_head data types tip-bot for Ingo Molnar
2010-08-16 17:32 ` [tip:perf/urgent] perf annotate tui: Fix exit and RIGHT keys handling tip-bot for Arnaldo Carvalho de Melo
2010-08-20 12:39 ` [tip:perf/core] perf ui browser: Abstract some more slang operations tip-bot for Arnaldo Carvalho de Melo
2010-08-20 12:40 ` [tip:perf/core] perf ui browser: Return the exit key in all browsers tip-bot for Arnaldo Carvalho de Melo
2010-08-20 12:40 ` [tip:perf/core] perf ui browser: Add routines to compactly specify exit keys tip-bot for Arnaldo Carvalho de Melo
2010-08-21 20:18 ` [tip:perf/core] perf tools: Add --tui and --stdio to choose the UI tip-bot for Arnaldo Carvalho de Melo
2010-08-30 8:33 ` [tip:perf/core] perf hists: Fix hist_entry__init_have_children tip-bot for Arnaldo Carvalho de Melo
2010-08-30 8:34 ` [tip:perf/core] perf hists browser: replace rb_first() != NULL by !RB_EMPTY_ROOT() tip-bot for Arnaldo Carvalho de Melo
2010-08-30 8:34 ` [tip:perf/core] perf hists browser: Init the has_children fields just once tip-bot for Arnaldo Carvalho de Melo
2010-08-30 8:34 ` [tip:perf/core] perf hists browser: Introduce "expand/collapse all callchains" action tip-bot for Arnaldo Carvalho de Melo
2010-09-09 19:45 ` [tip:perf/core] perf: Fix CPU hotplug tip-bot for Peter Zijlstra
2010-09-09 19:47 ` [tip:perf/core] perf: Deconstify struct pmu tip-bot for Peter Zijlstra
2010-09-09 19:47 ` [tip:perf/core] perf: Register PMU implementations tip-bot for Peter Zijlstra
2010-09-09 19:48 ` [tip:perf/core] perf: Unindent labels tip-bot for Peter Zijlstra
2010-09-09 19:48 ` [tip:perf/core] perf: Reduce perf_disable() usage tip-bot for Peter Zijlstra
2010-09-09 19:49 ` [tip:perf/core] perf: Per PMU disable tip-bot for Peter Zijlstra
2010-09-09 19:49 ` [tip:perf/core] perf: Default PMU ops tip-bot for Peter Zijlstra
2010-09-09 19:49 ` [tip:perf/core] perf: Shrink hw_perf_event tip-bot for Peter Zijlstra
2010-09-09 19:50 ` [tip:perf/core] perf: Rework the PMU methods tip-bot for Peter Zijlstra
2010-09-11 8:16 ` Michael Cree
2010-09-11 9:40 ` Peter Zijlstra
2010-09-12 5:33 ` Michael Cree
2010-09-12 5:37 ` [PATCH] alpha: Fix HW performance counters to be stopped properly Michael Cree
2010-09-15 10:02 ` [tip:perf/core] " tip-bot for Michael Cree
2010-09-13 12:15 ` [tip:perf/core] perf: Rework the PMU methods Peter Zijlstra
2010-09-13 13:18 ` Peter Zijlstra
2010-09-14 10:11 ` Michael Cree
2010-09-14 14:07 ` Peter Zijlstra
2010-09-15 20:25 ` Michael Cree
2010-09-09 19:50 ` [tip:perf/core] perf: Remove the sysfs bits tip-bot for Peter Zijlstra
2010-09-09 19:50 ` [tip:perf/core] perf: Separate find_get_context() from event initialization tip-bot for Peter Zijlstra
2010-09-09 19:51 ` [tip:perf/core] perf: Remove the swevent hash-table from the cpu context tip-bot for Peter Zijlstra
2010-09-09 19:51 ` [tip:perf/core] perf: Per cpu-context rotation timer tip-bot for Peter Zijlstra
2010-09-09 19:51 ` [tip:perf/core] perf: Per-pmu-per-cpu contexts tip-bot for Peter Zijlstra
2010-09-10 14:54 ` Frederic Weisbecker
2010-09-10 15:37 ` Paul E. McKenney
2010-09-10 15:46 ` Peter Zijlstra
2010-09-10 16:05 ` Paul E. McKenney
2010-09-10 15:56 ` Peter Zijlstra
2010-09-09 19:52 ` [tip:perf/core] perf: Move some code around tip-bot for Peter Zijlstra
2010-09-09 19:52 ` [tip:perf/core] perf: Clean up perf_event_context allocation tip-bot for Peter Zijlstra
2010-09-09 19:52 ` [tip:perf/core] perf: Multiple task contexts tip-bot for Peter Zijlstra
2010-09-09 19:53 ` [tip:perf/core] perf: Provide a separate task context for swevents tip-bot for Peter Zijlstra
2010-09-09 19:53 ` [tip:perf/core] perf: Optimize context ops tip-bot for Peter Zijlstra
2010-09-09 19:54 ` [tip:perf/core] perf: Fix up delayed_put_task_struct() tip-bot for Peter Zijlstra
2010-09-10 14:32 ` [tip:perf/core] perf: Ensure we call add_event_to_ctx() with the right locks held tip-bot for Peter Zijlstra
2010-09-10 15:48 ` [tip:perf/core] perf: Fix perf_init_event() tip-bot for Peter Zijlstra
2010-09-13 15:18 ` [tip:perf/core] perf: Sanitize the RCU logic tip-bot for Peter Zijlstra
2010-09-13 15:19 ` [tip:perf/core] perf: Fix free_event() tip-bot for Peter Zijlstra
2010-10-18 19:15 ` [tip:sched/core] sched: Unindent labels tip-bot for Peter Zijlstra
2010-10-18 19:22 ` [tip:perf/core] perf: Optimize sw events tip-bot for Peter Zijlstra
2010-10-18 19:22 ` [tip:perf/core] jump_label: Add COND_STMT(), reducer wrappery tip-bot for Peter Zijlstra
2010-10-26 10:22 ` [tip:perf/urgent] perf python scripting: Improve the failed-syscalls-by-pid script tip-bot for Arnaldo Carvalho de Melo
2010-10-26 10:22 ` [tip:perf/urgent] perf python scripting: Improve the syscalls-counts script tip-bot for Arnaldo Carvalho de Melo
2010-10-26 10:22 ` [tip:perf/urgent] perf python scripting: print the syscall name on sctop tip-bot for Arnaldo Carvalho de Melo
2010-10-26 10:23 ` [tip:perf/urgent] perf python scripting: Improve the syscalls-by-pid script tip-bot for Arnaldo Carvalho de Melo
2010-10-26 10:23 ` [tip:perf/urgent] perf python scripting: Support fedora 11 (audit 1.7.17) tip-bot for Arnaldo Carvalho de Melo
2010-10-27 11:01 ` [tip:perf/urgent] perf scripting: Shut up 'perf record' final status tip-bot for Arnaldo Carvalho de Melo
2010-10-27 11:01 ` [tip:perf/urgent] perf python scripting: Fixup cut'n'paste error in sctop script tip-bot for Arnaldo Carvalho de Melo
2010-10-27 11:02 ` [tip:perf/urgent] perf python scripting: Add futex-contention script tip-bot for Arnaldo Carvalho de Melo
2010-11-21 13:43 ` [tip:perf/core] perf tools: Change my maintainer address tip-bot for Arnaldo Carvalho de Melo
2010-11-23 10:22 ` [tip:sched/core] sched: Fix UP build breakage tip-bot for Peter Zijlstra
2010-11-23 10:22 ` [tip:sched/core] cpu: Remove incorrect BUG_ON tip-bot for Peter Zijlstra
2010-11-23 14:39 ` Oleg Nesterov
2010-11-23 15:05 ` Peter Zijlstra
2010-11-23 15:08 ` Oleg Nesterov
2010-11-23 17:16 ` Peter Zijlstra
2010-11-23 17:31 ` Oleg Nesterov
2010-11-23 10:23 ` [tip:sched/core] sched: Add some clock info to sched_debug tip-bot for Peter Zijlstra
2010-11-23 19:51 ` [tip:perf/urgent] perf record: Handle restrictive permissions in /proc/{kallsyms,modules} tip-bot for Arnaldo Carvalho de Melo
2010-11-26 15:00 ` [tip:perf/core] perf: Fix inherit vs. context rotation bug tip-bot for Thomas Gleixner
2010-11-28 4:36 ` Rakib Mullick
2010-11-26 15:01 ` [tip:perf/core] perf: Fix the software context switch counter tip-bot for Peter Zijlstra
2010-11-26 15:04 ` [tip:perf/core] perf: Ignore non-sampling overflows tip-bot for Peter Zijlstra
2010-11-26 19:20 ` Francis Moreau
2010-11-28 8:33 ` [tip:perf/core] perf record: Add option to disable collecting build-ids tip-bot for Arnaldo Carvalho de Melo
2010-11-29 10:22 ` Stephane Eranian
2010-11-29 15:14 ` Arnaldo Carvalho de Melo
2010-11-28 8:34 ` [tip:perf/core] perf events: Default to using event__process_lost tip-bot for Arnaldo Carvalho de Melo
2010-12-07 7:06 ` [tip:perf/urgent] perf record: Fix eternal wait for stillborn child tip-bot for Arnaldo Carvalho de Melo
2010-12-08 20:39 ` [tip:perf/urgent] perf: Fix duplicate events with multiple-pmu vs software events tip-bot for Peter Zijlstra
2010-12-08 20:42 ` [tip:perf/core] perf, amd: Remove the nb lock tip-bot for Peter Zijlstra
2010-12-08 20:42 ` [tip:perf/core] perf: Stop all counters on reboot tip-bot for Peter Zijlstra
2010-12-09 23:39 ` [tip:perf/core] perf session: Remove unneeded dump_printf calls tip-bot for Arnaldo Carvalho de Melo
2010-12-16 12:31 ` [tip:perf/core] perf, x86: Detect broken BIOSes that corrupt the PMU tip-bot for Peter Zijlstra
2010-12-16 12:33 ` [tip:perf/core] perf, x86: Provide a PEBS capable cycle event tip-bot for Peter Zijlstra
2010-12-22 11:28 ` [tip:perf/urgent] perf buildid-list: Fix error return for success tip-bot for Arnaldo Carvalho de Melo
2010-12-25 8:57 ` [tip:perf/core] perf symbols: Improve kallsyms symbol end addr calculation tip-bot for Arnaldo Carvalho de Melo
2010-12-25 8:58 ` [tip:perf/core] perf test: Look forward for symbol aliases tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:19 ` [tip:perf/core] perf script: Finish the rename from trace to script tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:19 ` [tip:perf/core] perf record: Fix use of sample_id_all userspace with !sample_id_all kernels tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:19 ` [tip:perf/core] perf script: Fix event ordering settings to work with older kernels tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:21 ` [tip:perf/core] perf tools: Introduce event selectors tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:21 ` [tip:perf/core] perf evsel: Adopt MATCH_EVENT macro from 'stat' tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:22 ` [tip:perf/core] perf util: Move do_read from session to util tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:22 ` [tip:perf/core] perf evsel: Delete the event selectors at exit tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:23 ` [tip:perf/core] perf evsel: Steal the counter reading routines from stat tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:23 ` [tip:perf/core] perf evsel: Introduce per cpu and per thread open helpers tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:24 ` [tip:perf/core] perf tools: Refactor cpumap to hold nr and the map tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:24 ` [tip:perf/core] perf tools: Refactor all_tids " tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:25 ` [tip:perf/core] perf evsel: Use {cpu,thread}_map to shorten list of parameters tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:25 ` [tip:perf/core] perf evsel: Auto allocate resources needed for some methods tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:26 ` [tip:perf/core] perf test: Add test for counting open syscalls tip-bot for Arnaldo Carvalho de Melo
2011-01-05 17:36 ` [tip:perf/core] perf test: Clarify some error reports in the open syscall test tip-bot for Arnaldo Carvalho de Melo
2011-01-05 17:37 ` [tip:perf/core] perf session: Warn about errors when processing pipe events too tip-bot for Arnaldo Carvalho de Melo
2011-01-05 17:37 ` [tip:perf/core] perf script: Use the default lost event handler tip-bot for Arnaldo Carvalho de Melo
2011-01-05 17:38 ` [tip:perf/core] perf script: Make some lists static tip-bot for Arnaldo Carvalho de Melo
2011-01-11 11:09 ` [tip:perf/urgent] perf sched: Fix allocation result check tip-bot for Arnaldo Carvalho de Melo
2011-01-11 11:10 ` [tip:perf/urgent] perf tools: Emit clearer message for sys_perf_event_open ENOENT return tip-bot for Arnaldo Carvalho de Melo
2011-01-11 11:11 ` [tip:perf/urgent] perf evsel: Support perf_evsel__open(cpus > 1 && threads > 1) tip-bot for Arnaldo Carvalho de Melo
2011-01-11 11:11 ` [tip:perf/urgent] perf session: Fix infinite loop in __perf_session__process_events tip-bot for Arnaldo Carvalho de Melo
2011-01-12 10:51 ` [tip:perf/urgent] perf evsel: Fix order of event list deletion tip-bot for Arnaldo Carvalho de Melo
2011-01-12 10:52 ` [tip:perf/urgent] perf top: Fix annotate segv tip-bot for Arnaldo Carvalho de Melo
2011-01-12 10:52 ` [tip:perf/urgent] Revert "perf tools: Emit clearer message for sys_perf_event_open ENOENT return" tip-bot for Arnaldo Carvalho de Melo
2011-01-18 8:48 ` [tip:perf/urgent] perf tools: Fix handling of wildcards in tracepoint event selectors tip-bot for Arnaldo Carvalho de Melo
2011-01-18 19:06 ` [tip:perf/urgent] perf: Fix contexted inheritance tip-bot for Peter Zijlstra
2011-01-21 15:37 ` [tip:perf/urgent] perf: Annotate cpuctx->ctx.mutex to avoid a lockdep splat tip-bot for Peter Zijlstra
2011-01-23 18:00 ` [tip:perf/urgent] perf test: Fix build on older glibcs tip-bot for Arnaldo Carvalho de Melo
2011-01-23 18:01 ` [tip:perf/urgent] perf tools: Add missing header, fixes build tip-bot for Arnaldo Carvalho de Melo
2011-01-23 18:02 ` [tip:perf/urgent] perf tools: Fix build when using gcc 3.4.6 tip-bot for Arnaldo Carvalho de Melo
2011-01-23 18:02 ` [tip:perf/urgent] perf tools: Fix build by checking if extra warnings are supported tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:14 ` [tip:perf/core] perf evsel: Introduce perf_evlist tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:14 ` [tip:perf/core] perf evlist: Adopt the pollfd array tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:14 ` [tip:perf/core] perf evsel: Support event groups tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:15 ` [tip:perf/core] perf evsel: Allow specifying if the inherit bit should be set tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:15 ` [tip:perf/core] perf top: Use perf_evsel__open tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:15 ` [tip:perf/core] perf record: " tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:16 ` [tip:perf/core] perf evsel: Introduce mmap support tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:16 ` [tip:perf/core] perf record: Use struct perf_mmap and helpers tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:17 ` [tip:perf/core] perf record: Move perf_mmap__write_tail to perf.h tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:17 ` [tip:perf/core] perf evlist: Move the mmap array from perf_evsel tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:17 ` [tip:perf/core] perf record: Use perf_evlist__mmap tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:18 ` [tip:perf/core] perf tools: Add missing cpu_map__delete() tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:18 ` [tip:perf/core] perf test: Check counts on all cpus in test__open_syscall_event_on_all_cpus tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:19 ` [tip:perf/core] perf evlist: Steal mmap reading routine from 'perf top' tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:19 ` [tip:perf/core] perf test: Add test for the evlist mmap routines tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:21 ` [tip:perf/core] perf top: Add native_safe_halt to skip symbols tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:23 ` [tip:perf/core] perf tools: Pass the struct opt to the wildcard parsing routine tip-bot for Arnaldo Carvalho de Melo
2009-08-04 8:32 ` [patch] perf tools: allow top users to switch between weighted and individual counter display Ingo Molnar
2009-08-04 8:46 ` Mike Galbraith
2009-08-04 8:56 ` Ingo Molnar
2009-08-04 11:36 ` [tip:perfcounters/core] perf top: Improve interactive key handling tip-bot for Mike Galbraith
2009-08-02 13:11 ` [tip:perfcounters/core] perf_counter tools: Allow top users to switch between weighted and individual counter display tip-bot for Mike Galbraith
-- strict thread matches above, loose matches on Subject: below --
2009-11-12 10:07 [patch] sched: fix/add missing update_rq_clock() calls Mike Galbraith
2009-11-12 11:01 ` Peter Zijlstra
2009-11-12 11:27 ` Ingo Molnar
2009-11-12 11:29 ` Peter Zijlstra
2009-11-12 11:34 ` Ingo Molnar
2009-11-12 11:36 ` Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-1e3c88bdeb1260edc341e45c9fb8efd182a5c511@git.kernel.org \
--to=a.p.zijlstra@chello.nl \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).