From: tip-bot for Rusty Russell <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: rusty@rustcorp.com.au, tglx@linutronix.de,
linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@kernel.org
Subject: [tip:x86/apic] x86/lguest: Clean up lguest_setup_irq
Date: Wed, 5 Aug 2015 15:18:39 -0700 [thread overview]
Message-ID: <tip-27a6f41c1a20a3339f456647a21e45fca5b82b62@git.kernel.org> (raw)
In-Reply-To: <1438662776-4823-1-git-send-email-rusty@rustcorp.com.au>
Commit-ID: 27a6f41c1a20a3339f456647a21e45fca5b82b62
Gitweb: http://git.kernel.org/tip/27a6f41c1a20a3339f456647a21e45fca5b82b62
Author: Rusty Russell <rusty@rustcorp.com.au>
AuthorDate: Tue, 4 Aug 2015 14:02:55 +0930
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Thu, 6 Aug 2015 00:14:58 +0200
x86/lguest: Clean up lguest_setup_irq
We make it static and hoist it higher in the file for the next patch.
We also give a nice panic if it fails during boot.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Link: http://lkml.kernel.org/r/1438662776-4823-1-git-send-email-rusty@rustcorp.com.au
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/lguest/boot.c | 43 ++++++++++++++++++++++---------------------
1 file changed, 22 insertions(+), 21 deletions(-)
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index f2dc08c..d933a11 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -835,6 +835,26 @@ static struct irq_chip lguest_irq_controller = {
.irq_unmask = enable_lguest_irq,
};
+/*
+ * Interrupt descriptors are allocated as-needed, but low-numbered ones are
+ * reserved by the generic x86 code. So we ignore irq_alloc_desc_at if it
+ * tells us the irq is already used: other errors (ie. ENOMEM) we take
+ * seriously.
+ */
+static int lguest_setup_irq(unsigned int irq)
+{
+ int err;
+
+ /* Returns -ve error or vector number. */
+ err = irq_alloc_desc_at(irq, 0);
+ if (err < 0 && err != -EEXIST)
+ return err;
+
+ irq_set_chip_and_handler_name(irq, &lguest_irq_controller,
+ handle_level_irq, "level");
+ return 0;
+}
+
static int lguest_enable_irq(struct pci_dev *dev)
{
u8 line = 0;
@@ -879,26 +899,6 @@ static void __init lguest_init_IRQ(void)
}
/*
- * Interrupt descriptors are allocated as-needed, but low-numbered ones are
- * reserved by the generic x86 code. So we ignore irq_alloc_desc_at if it
- * tells us the irq is already used: other errors (ie. ENOMEM) we take
- * seriously.
- */
-int lguest_setup_irq(unsigned int irq)
-{
- int err;
-
- /* Returns -ve error or vector number. */
- err = irq_alloc_desc_at(irq, 0);
- if (err < 0 && err != -EEXIST)
- return err;
-
- irq_set_chip_and_handler_name(irq, &lguest_irq_controller,
- handle_level_irq, "level");
- return 0;
-}
-
-/*
* Time.
*
* It would be far better for everyone if the Guest had its own clock, but
@@ -1040,7 +1040,8 @@ static void lguest_time_irq(unsigned int irq, struct irq_desc *desc)
static void lguest_time_init(void)
{
/* Set up the timer interrupt (0) to go to our simple timer routine */
- lguest_setup_irq(0);
+ if (lguest_setup_irq(0) != 0)
+ panic("Could not set up timer irq");
irq_set_handler(0, lguest_time_irq);
clocksource_register_hz(&lguest_clock, NSEC_PER_SEC);
next prev parent reply other threads:[~2015-08-05 22:19 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-02 20:38 [patch 0/7] x86: Store irq descriptor in vector array Thomas Gleixner
2015-08-02 20:38 ` [patch 1/7] x86/irq: Protect smp_cleanup_move Thomas Gleixner
2015-08-05 22:19 ` [tip:x86/apic] " tip-bot for Thomas Gleixner
2015-08-02 20:38 ` [patch 3/7] x86/irq: Replace numeric constant Thomas Gleixner
2015-08-05 22:19 ` [tip:x86/apic] " tip-bot for Thomas Gleixner
2015-08-02 20:38 ` [patch 2/7] x86/lguest: Do not setup unused irq vectors Thomas Gleixner
2015-08-03 2:47 ` Rusty Russell
2015-08-03 9:40 ` Thomas Gleixner
2015-08-04 4:27 ` Rusty Russell
2015-08-04 4:32 ` [PATCH 1/2] x86/lguest: clean up lguest_setup_irq Rusty Russell
2015-08-04 4:32 ` [PATCH 2/2] x86/lguest: Do not setup unused irq vectors Rusty Russell
2015-08-05 22:19 ` [tip:x86/apic] " tip-bot for Thomas Gleixner
2015-08-05 22:18 ` tip-bot for Rusty Russell [this message]
2015-08-02 20:38 ` [patch 5/7] x86/irq: Get rid of an indentation level Thomas Gleixner
2015-08-05 22:20 ` [tip:x86/apic] " tip-bot for Thomas Gleixner
2015-08-02 20:38 ` [patch 4/7] x86/irq: Rename VECTOR_UNDEFINED to VECTOR_UNUSED Thomas Gleixner
2015-08-05 22:20 ` [tip:x86/apic] " tip-bot for Thomas Gleixner
2015-08-02 20:38 ` [patch 6/7] genirq: Provide irq_desc_has_action Thomas Gleixner
2015-08-05 22:20 ` [tip:x86/apic] " tip-bot for Thomas Gleixner
2015-08-02 20:38 ` [patch 7/7] x86/irq: Store irq descriptor in vector array Thomas Gleixner
2015-08-05 22:21 ` [tip:x86/apic] " tip-bot for Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-27a6f41c1a20a3339f456647a21e45fca5b82b62@git.kernel.org \
--to=tipbot@zytor.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=rusty@rustcorp.com.au \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).