From: tip-bot for Yinghai Lu <yinghai@kernel.org>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@redhat.com,
yinghai@kernel.org, torvalds@linux-foundation.org,
tony.luck@intel.com, tglx@linutronix.de
Subject: [tip:x86/irq] smp: Use nr_cpus= to set nr_cpu_ids early
Date: Thu, 18 Feb 2010 01:59:03 GMT [thread overview]
Message-ID: <tip-2b633e3fac5efada088b57d31e65401f22bcc18f@git.kernel.org> (raw)
In-Reply-To: <1265793639-15071-34-git-send-email-yinghai@kernel.org>
Commit-ID: 2b633e3fac5efada088b57d31e65401f22bcc18f
Gitweb: http://git.kernel.org/tip/2b633e3fac5efada088b57d31e65401f22bcc18f
Author: Yinghai Lu <yinghai@kernel.org>
AuthorDate: Wed, 10 Feb 2010 01:20:37 -0800
Committer: H. Peter Anvin <hpa@zytor.com>
CommitDate: Wed, 17 Feb 2010 17:30:22 -0800
smp: Use nr_cpus= to set nr_cpu_ids early
On x86, before prefill_possible_map(), nr_cpu_ids will be NR_CPUS aka
CONFIG_NR_CPUS.
Add nr_cpus= to set nr_cpu_ids. so we can simulate cpus <=8 are installed on
normal config.
-v2: accordging to Christoph, acpi_numa_init should use nr_cpu_ids in stead of
NR_CPUS.
-v3: add doc in kernel-parameters.txt according to Andrew.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-34-git-send-email-yinghai@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Tony Luck <tony.luck@intel.com>
---
Documentation/kernel-parameters.txt | 6 ++++++
arch/ia64/kernel/acpi.c | 4 ++--
arch/x86/kernel/smpboot.c | 7 ++++---
drivers/acpi/numa.c | 4 ++--
init/main.c | 14 ++++++++++++++
5 files changed, 28 insertions(+), 7 deletions(-)
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 736d456..51bceb0 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1772,6 +1772,12 @@ and is between 256 and 4096 characters. It is defined in the file
purges which is reported from either PAL_VM_SUMMARY or
SAL PALO.
+ nr_cpus= [SMP] Maximum number of processors that an SMP kernel
+ could support. nr_cpus=n : n >= 1 limits the kernel to
+ supporting 'n' processors. Later in runtime you can not
+ use hotplug cpu feature to put more cpu back to online.
+ just like you compile the kernel NR_CPUS=n
+
nr_uarts= [SERIAL] maximum number of UARTs to be registered.
numa_zonelist_order= [KNL, BOOT] Select zonelist order for NUMA.
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 40574ae..605a08b 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -881,8 +881,8 @@ __init void prefill_possible_map(void)
possible = available_cpus + additional_cpus;
- if (possible > NR_CPUS)
- possible = NR_CPUS;
+ if (possible > nr_cpu_ids)
+ possible = nr_cpu_ids;
printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
possible, max((possible - available_cpus), 0));
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 678d0b8..eff2fe1 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1213,11 +1213,12 @@ __init void prefill_possible_map(void)
total_cpus = max_t(int, possible, num_processors + disabled_cpus);
- if (possible > CONFIG_NR_CPUS) {
+ /* nr_cpu_ids could be reduced via nr_cpus= */
+ if (possible > nr_cpu_ids) {
printk(KERN_WARNING
"%d Processors exceeds NR_CPUS limit of %d\n",
- possible, CONFIG_NR_CPUS);
- possible = CONFIG_NR_CPUS;
+ possible, nr_cpu_ids);
+ possible = nr_cpu_ids;
}
printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
index 7ad48df..b872546 100644
--- a/drivers/acpi/numa.c
+++ b/drivers/acpi/numa.c
@@ -279,9 +279,9 @@ int __init acpi_numa_init(void)
/* SRAT: Static Resource Affinity Table */
if (!acpi_table_parse(ACPI_SIG_SRAT, acpi_parse_srat)) {
acpi_table_parse_srat(ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY,
- acpi_parse_x2apic_affinity, NR_CPUS);
+ acpi_parse_x2apic_affinity, nr_cpu_ids);
acpi_table_parse_srat(ACPI_SRAT_TYPE_CPU_AFFINITY,
- acpi_parse_processor_affinity, NR_CPUS);
+ acpi_parse_processor_affinity, nr_cpu_ids);
ret = acpi_table_parse_srat(ACPI_SRAT_TYPE_MEMORY_AFFINITY,
acpi_parse_memory_affinity,
NR_NODE_MEMBLKS);
diff --git a/init/main.c b/init/main.c
index 8451878..05b5283 100644
--- a/init/main.c
+++ b/init/main.c
@@ -149,6 +149,20 @@ static int __init nosmp(char *str)
early_param("nosmp", nosmp);
+/* this is hard limit */
+static int __init nrcpus(char *str)
+{
+ int nr_cpus;
+
+ get_option(&str, &nr_cpus);
+ if (nr_cpus > 0 && nr_cpus < nr_cpu_ids)
+ nr_cpu_ids = nr_cpus;
+
+ return 0;
+}
+
+early_param("nr_cpus", nrcpus);
+
static int __init maxcpus(char *str)
{
get_option(&str, &setup_max_cpus);
next prev parent reply other threads:[~2010-02-18 1:59 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-10 9:20 [PATCH -v7 0/35] tip related: not use bootmem for x86 Yinghai Lu
2010-02-10 9:20 ` [PATCH 01/35] x86: fix sci on ioapic 1 Yinghai Lu
2010-02-10 22:48 ` [tip:x86/urgent] x86: Fix SCI on IOAPIC != 0 tip-bot for Yinghai Lu
2010-02-10 9:20 ` [PATCH 02/35] x86: keep chip_data in create_irq_nr and destroy_irq Yinghai Lu
2010-02-10 22:39 ` [tip:x86/irq] x86: Avoid race condition in pci_enable_msix() tip-bot for Brandon Phiilps
2010-02-10 9:20 ` [PATCH 03/35] x86: move range related operation to one file Yinghai Lu
2010-02-10 9:20 ` [PATCH 04/35] x86/pci: use resource_size_t in update_res Yinghai Lu
2010-02-10 9:20 ` [PATCH 05/35] x86/pci: amd one chain system to use pci read out res Yinghai Lu
2010-02-10 9:20 ` [PATCH 06/35] x86/pci: use u64 instead of size_t in amd_bus.c Yinghai Lu
2010-02-10 9:20 ` [PATCH 07/35] x86/pci: add cap_resource Yinghai Lu
2010-02-10 9:20 ` [PATCH 08/35] x86/pci: enable pci root res read out for 32bit too Yinghai Lu
2010-02-10 9:20 ` [PATCH 09/35] x86: change range end to start+size Yinghai Lu
2010-02-10 9:20 ` [PATCH 10/35] x86: print out for RAM buffer Yinghai Lu
2010-02-10 9:20 ` [PATCH 11/35] x86: call early_res_to_bootmem one time Yinghai Lu
2010-02-10 9:20 ` [PATCH 12/35] x86: introduce max_early_res and early_res_count Yinghai Lu
2010-02-10 9:20 ` [PATCH 13/35] x86: dynamic increase early_res array size Yinghai Lu
2010-02-10 9:20 ` [PATCH 14/35] x86: make early_node_mem get mem > 4g if possible Yinghai Lu
2010-02-10 9:20 ` [PATCH 15/35] x86: only call dma32_reserve_bootmem 64bit !CONFIG_NUMA Yinghai Lu
2010-02-10 9:20 ` [PATCH 16/35] x86: make 64 bit use early_res instead of bootmem before slab Yinghai Lu
2010-02-14 14:08 ` Stephen Rothwell
2010-02-14 20:31 ` Yinghai Lu
2010-02-17 1:16 ` Yinghai Lu
2010-02-24 22:59 ` Peter Zijlstra
2010-02-24 23:29 ` Yinghai Lu
2010-02-24 23:32 ` Yinghai Lu
2010-02-25 2:07 ` Tejun Heo
2010-02-25 2:13 ` Yinghai Lu
2010-02-25 2:33 ` Tejun Heo
2010-02-25 2:36 ` [PATCH] early_res: add free_early_partial Yinghai Lu
2010-02-25 11:10 ` Peter Zijlstra
2010-03-02 2:48 ` [PATCH] early_res: need to save name aside with free_early_partial Yinghai Lu
2010-02-10 9:20 ` [PATCH 17/35] sparsemem: put usemap for one node together Yinghai Lu
2010-02-10 9:20 ` [PATCH 18/35] sparsemem: put mem map " Yinghai Lu
2010-02-10 9:20 ` [PATCH 19/35] x86: move bios page reserve early to head32/64.c Yinghai Lu
2010-02-10 9:20 ` [PATCH 20/35] x86: seperate early_res related code from e820.c Yinghai Lu
2010-02-10 9:20 ` [PATCH 21/35] x86: add find_early_area_size Yinghai Lu
2010-02-10 9:20 ` [PATCH 22/35] x86: move back find_e820_area to e820.c Yinghai Lu
2010-02-10 9:20 ` [PATCH 23/35] early_res: enhance check_and_double_early_res Yinghai Lu
2010-02-10 9:20 ` [PATCH 24/35] x86: make 32bit support NO_BOOTMEM Yinghai Lu
2010-02-10 9:20 ` [PATCH 25/35] move round_up/down to kernel.h Yinghai Lu
2010-02-13 18:49 ` Joe Perches
2010-02-13 19:52 ` H. Peter Anvin
2010-02-13 20:11 ` Andrew Morton
2010-02-13 21:57 ` H. Peter Anvin
2010-02-10 9:20 ` [PATCH 26/35] x86: add find_fw_memmap_area Yinghai Lu
2010-02-10 9:20 ` [PATCH 27/35] core: move early_res Yinghai Lu
2010-02-14 14:16 ` Stephen Rothwell
2010-02-14 17:08 ` Ingo Molnar
2010-02-14 23:43 ` Stephen Rothwell
2010-02-15 4:44 ` Ingo Molnar
2010-02-14 20:46 ` Yinghai Lu
2010-02-16 23:46 ` H. Peter Anvin
2010-02-16 23:53 ` Yinghai Lu
2010-02-17 0:01 ` H. Peter Anvin
2010-02-17 0:41 ` Yinghai Lu
2010-02-17 0:46 ` H. Peter Anvin
2010-02-17 1:10 ` Yinghai Lu
2010-02-17 2:40 ` Yinghai Lu
2010-02-10 9:20 ` [PATCH 28/35] irq: remove not need bootmem code Yinghai Lu
2010-02-18 1:57 ` [tip:x86/irq] irq: Remove unnecessary " tip-bot for Yinghai Lu
2010-02-10 9:20 ` [PATCH 29/35] radix: move radix init early Yinghai Lu
2010-02-18 1:57 ` [tip:x86/irq] init: Move radix_tree_init() early tip-bot for Yinghai Lu
2010-02-10 9:20 ` [PATCH 30/35] sparseirq: change irq_desc_ptrs to static Yinghai Lu
2010-02-18 1:58 ` [tip:x86/irq] sparseirq: Change " tip-bot for Yinghai Lu
2010-02-10 9:20 ` [PATCH 31/35] sparseirq: use radix_tree instead of ptrs array Yinghai Lu
2010-02-18 1:58 ` [tip:x86/irq] sparseirq: Use " tip-bot for Yinghai Lu
2010-02-10 9:20 ` [PATCH 32/35] x86: remove arch_probe_nr_irqs Yinghai Lu
2010-02-18 1:58 ` [tip:x86/irq] x86, irq: Remove arch_probe_nr_irqs tip-bot for Yinghai Lu
2010-02-10 9:20 ` [PATCH 33/35] use nr_cpus= to set nr_cpu_ids early Yinghai Lu
2010-02-18 1:59 ` tip-bot for Yinghai Lu [this message]
2010-02-10 9:20 ` [PATCH 34/35] x86: use num_processors for possible cpus Yinghai Lu
2010-02-18 1:32 ` H. Peter Anvin
2010-02-18 2:38 ` Yinghai Lu
2010-02-18 17:26 ` H. Peter Anvin
2010-02-18 19:48 ` Christoph Lameter
2010-02-18 19:53 ` H. Peter Anvin
2010-02-19 15:14 ` Christoph Lameter
2010-02-19 16:14 ` H. Peter Anvin
2010-02-10 9:20 ` [PATCH 35/35] x86: make 32bit apic flat to physflat switch like 64bit Yinghai Lu
2010-02-11 16:14 ` [PATCH -v7 0/35] tip related: not use bootmem for x86 Ingo Molnar
2010-02-11 21:10 ` Yinghai Lu
2010-02-15 2:27 ` Benjamin Herrenschmidt
2010-02-15 4:50 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-2b633e3fac5efada088b57d31e65401f22bcc18f@git.kernel.org \
--to=yinghai@kernel.org \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=tony.luck@intel.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).