From: tip-bot for Boris Ostrovsky <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: bp@alien8.de, luto@amacapital.net, tglx@linutronix.de,
mingo@kernel.org, boris.ostrovsky@oracle.com,
dvlasenk@redhat.com, david.vrabel@citrix.com,
linux-kernel@vger.kernel.org, torvalds@linux-foundation.org,
hpa@zytor.com, brgerst@gmail.com
Subject: [tip:x86/asm] x86/cpu: Factor out common CPU initialization code, fix 32-bit Xen PV guests
Date: Thu, 2 Apr 2015 05:33:36 -0700 [thread overview]
Message-ID: <tip-3f85483bd80ef1de8cbbf0361be59f6a069b59d4@git.kernel.org> (raw)
In-Reply-To: <1427897534-5086-1-git-send-email-boris.ostrovsky@oracle.com>
Commit-ID: 3f85483bd80ef1de8cbbf0361be59f6a069b59d4
Gitweb: http://git.kernel.org/tip/3f85483bd80ef1de8cbbf0361be59f6a069b59d4
Author: Boris Ostrovsky <boris.ostrovsky@oracle.com>
AuthorDate: Wed, 1 Apr 2015 10:12:14 -0400
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Thu, 2 Apr 2015 12:06:41 +0200
x86/cpu: Factor out common CPU initialization code, fix 32-bit Xen PV guests
Some of x86 bare-metal and Xen CPU initialization code is common
between the two and therefore can be factored out to avoid code
duplication.
As a side effect, doing so will also extend the fix provided by
commit a7fcf28d431e ("x86/asm/entry: Replace this_cpu_sp0() with
current_top_of_stack() to x86_32") to 32-bit Xen PV guests.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: konrad.wilk@oracle.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1427897534-5086-1-git-send-email-boris.ostrovsky@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
arch/x86/include/asm/smp.h | 1 +
arch/x86/kernel/smpboot.c | 37 ++++++++++++++++++++++---------------
arch/x86/xen/smp.c | 13 +------------
3 files changed, 24 insertions(+), 27 deletions(-)
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index 8cd1cc3..81d02fc 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -154,6 +154,7 @@ void cpu_die_common(unsigned int cpu);
void native_smp_prepare_boot_cpu(void);
void native_smp_prepare_cpus(unsigned int max_cpus);
void native_smp_cpus_done(unsigned int max_cpus);
+void common_cpu_up(unsigned int cpunum, struct task_struct *tidle);
int native_cpu_up(unsigned int cpunum, struct task_struct *tidle);
int native_cpu_disable(void);
void native_cpu_die(unsigned int cpu);
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 7b20ffd..5b298a9 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -779,6 +779,26 @@ out:
return boot_error;
}
+void common_cpu_up(unsigned int cpu, struct task_struct *idle)
+{
+ /* Just in case we booted with a single CPU. */
+ alternatives_enable_smp();
+
+ per_cpu(current_task, cpu) = idle;
+
+#ifdef CONFIG_X86_32
+ /* Stack for startup_32 can be just as for start_secondary onwards */
+ irq_ctx_init(cpu);
+ per_cpu(cpu_current_top_of_stack, cpu) =
+ (unsigned long)task_stack_page(idle) + THREAD_SIZE;
+#else
+ clear_tsk_thread_flag(idle, TIF_FORK);
+ initial_gs = per_cpu_offset(cpu);
+#endif
+ per_cpu(kernel_stack, cpu) =
+ (unsigned long)task_stack_page(idle) + THREAD_SIZE;
+}
+
/*
* NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad
* (ie clustered apic addressing mode), this is a LOGICAL apic ID.
@@ -796,24 +816,9 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle)
int cpu0_nmi_registered = 0;
unsigned long timeout;
- /* Just in case we booted with a single CPU. */
- alternatives_enable_smp();
-
idle->thread.sp = (unsigned long) (((struct pt_regs *)
(THREAD_SIZE + task_stack_page(idle))) - 1);
- per_cpu(current_task, cpu) = idle;
-#ifdef CONFIG_X86_32
- /* Stack for startup_32 can be just as for start_secondary onwards */
- irq_ctx_init(cpu);
- per_cpu(cpu_current_top_of_stack, cpu) =
- (unsigned long)task_stack_page(idle) + THREAD_SIZE;
-#else
- clear_tsk_thread_flag(idle, TIF_FORK);
- initial_gs = per_cpu_offset(cpu);
-#endif
- per_cpu(kernel_stack, cpu) =
- (unsigned long)task_stack_page(idle) + THREAD_SIZE;
early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
initial_code = (unsigned long)start_secondary;
stack_start = idle->thread.sp;
@@ -954,6 +959,8 @@ int native_cpu_up(unsigned int cpu, struct task_struct *tidle)
/* the FPU context is blank, nobody can own it */
__cpu_disable_lazy_restore(cpu);
+ common_cpu_up(cpu, tidle);
+
err = do_boot_cpu(apicid, cpu, tidle);
if (err) {
pr_err("do_boot_cpu failed(%d) to wakeup CPU#%u\n", err, cpu);
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 765b768..7413ee3 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -445,14 +445,7 @@ static int xen_cpu_up(unsigned int cpu, struct task_struct *idle)
{
int rc;
- per_cpu(current_task, cpu) = idle;
-#ifdef CONFIG_X86_32
- irq_ctx_init(cpu);
-#else
- clear_tsk_thread_flag(idle, TIF_FORK);
-#endif
- per_cpu(kernel_stack, cpu) =
- (unsigned long)task_stack_page(idle) + THREAD_SIZE;
+ common_cpu_up(cpu, idle);
xen_setup_runstate_info(cpu);
xen_setup_timer(cpu);
@@ -467,10 +460,6 @@ static int xen_cpu_up(unsigned int cpu, struct task_struct *idle)
if (rc)
return rc;
- if (num_online_cpus() == 1)
- /* Just in case we booted with a single CPU. */
- alternatives_enable_smp();
-
rc = xen_smp_intr_init(cpu);
if (rc)
return rc;
prev parent reply other threads:[~2015-04-02 12:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-01 14:12 [PATCH v2] x86: Factor out common CPU initialization code Boris Ostrovsky
2015-04-01 14:14 ` David Vrabel
2015-04-02 12:33 ` tip-bot for Boris Ostrovsky [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-3f85483bd80ef1de8cbbf0361be59f6a069b59d4@git.kernel.org \
--to=tipbot@zytor.com \
--cc=boris.ostrovsky@oracle.com \
--cc=bp@alien8.de \
--cc=brgerst@gmail.com \
--cc=david.vrabel@citrix.com \
--cc=dvlasenk@redhat.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=luto@amacapital.net \
--cc=mingo@kernel.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox