From: tip-bot for Toshi Kani <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: mingo@kernel.org, tglx@linutronix.de, bp@alien8.de,
linux-kernel@vger.kernel.org, hpa@zytor.com, toshi.kani@hpe.com,
gratian.crisan@ni.com, luto@kernel.org
Subject: [tip:x86/mm] x86/mm: Remove pointless checks in vmalloc_fault
Date: Thu, 15 Mar 2018 07:31:05 -0700 [thread overview]
Message-ID: <tip-565977a3d929fc4427769117a8ac976ec16776d5@git.kernel.org> (raw)
In-Reply-To: <20180314205932.7193-1-toshi.kani@hpe.com>
Commit-ID: 565977a3d929fc4427769117a8ac976ec16776d5
Gitweb: https://git.kernel.org/tip/565977a3d929fc4427769117a8ac976ec16776d5
Author: Toshi Kani <toshi.kani@hpe.com>
AuthorDate: Wed, 14 Mar 2018 14:59:32 -0600
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Thu, 15 Mar 2018 15:27:47 +0100
x86/mm: Remove pointless checks in vmalloc_fault
vmalloc_fault() sets user's pgd or p4d from the kernel page table. Once
it's set, all tables underneath are identical. There is no point of
following the same page table with two separate pointers and make sure they
see the same with BUG().
Remove the pointless checks in vmalloc_fault(). Also rename the kernel
pgd/p4d pointers to pgd_k/p4d_k so that their names are consistent in the
file.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: Gratian Crisan <gratian.crisan@ni.com>
Link: https://lkml.kernel.org/r/20180314205932.7193-1-toshi.kani@hpe.com
---
arch/x86/mm/fault.c | 56 ++++++++++++++++-------------------------------------
1 file changed, 17 insertions(+), 39 deletions(-)
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 84d702a71afe..70c3b1c43676 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -417,11 +417,11 @@ void vmalloc_sync_all(void)
*/
static noinline int vmalloc_fault(unsigned long address)
{
- pgd_t *pgd, *pgd_ref;
- p4d_t *p4d, *p4d_ref;
- pud_t *pud, *pud_ref;
- pmd_t *pmd, *pmd_ref;
- pte_t *pte, *pte_ref;
+ pgd_t *pgd, *pgd_k;
+ p4d_t *p4d, *p4d_k;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte;
/* Make sure we are in vmalloc area: */
if (!(address >= VMALLOC_START && address < VMALLOC_END))
@@ -435,73 +435,51 @@ static noinline int vmalloc_fault(unsigned long address)
* case just flush:
*/
pgd = (pgd_t *)__va(read_cr3_pa()) + pgd_index(address);
- pgd_ref = pgd_offset_k(address);
- if (pgd_none(*pgd_ref))
+ pgd_k = pgd_offset_k(address);
+ if (pgd_none(*pgd_k))
return -1;
if (pgtable_l5_enabled) {
if (pgd_none(*pgd)) {
- set_pgd(pgd, *pgd_ref);
+ set_pgd(pgd, *pgd_k);
arch_flush_lazy_mmu_mode();
} else {
- BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref));
+ BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_k));
}
}
/* With 4-level paging, copying happens on the p4d level. */
p4d = p4d_offset(pgd, address);
- p4d_ref = p4d_offset(pgd_ref, address);
- if (p4d_none(*p4d_ref))
+ p4d_k = p4d_offset(pgd_k, address);
+ if (p4d_none(*p4d_k))
return -1;
if (p4d_none(*p4d) && !pgtable_l5_enabled) {
- set_p4d(p4d, *p4d_ref);
+ set_p4d(p4d, *p4d_k);
arch_flush_lazy_mmu_mode();
} else {
- BUG_ON(p4d_pfn(*p4d) != p4d_pfn(*p4d_ref));
+ BUG_ON(p4d_pfn(*p4d) != p4d_pfn(*p4d_k));
}
- /*
- * Below here mismatches are bugs because these lower tables
- * are shared:
- */
BUILD_BUG_ON(CONFIG_PGTABLE_LEVELS < 4);
pud = pud_offset(p4d, address);
- pud_ref = pud_offset(p4d_ref, address);
- if (pud_none(*pud_ref))
+ if (pud_none(*pud))
return -1;
- if (pud_none(*pud) || pud_pfn(*pud) != pud_pfn(*pud_ref))
- BUG();
-
if (pud_large(*pud))
return 0;
pmd = pmd_offset(pud, address);
- pmd_ref = pmd_offset(pud_ref, address);
- if (pmd_none(*pmd_ref))
+ if (pmd_none(*pmd))
return -1;
- if (pmd_none(*pmd) || pmd_pfn(*pmd) != pmd_pfn(*pmd_ref))
- BUG();
-
if (pmd_large(*pmd))
return 0;
- pte_ref = pte_offset_kernel(pmd_ref, address);
- if (!pte_present(*pte_ref))
- return -1;
-
pte = pte_offset_kernel(pmd, address);
-
- /*
- * Don't use pte_page here, because the mappings can point
- * outside mem_map, and the NUMA hash lookup cannot handle
- * that:
- */
- if (!pte_present(*pte) || pte_pfn(*pte) != pte_pfn(*pte_ref))
- BUG();
+ if (!pte_present(*pte))
+ return -1;
return 0;
}
prev parent reply other threads:[~2018-03-15 14:31 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-14 20:59 [PATCH] x86/mm: remove pointless checks in vmalloc_fault Toshi Kani
2018-03-15 14:31 ` tip-bot for Toshi Kani [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-565977a3d929fc4427769117a8ac976ec16776d5@git.kernel.org \
--to=tipbot@zytor.com \
--cc=bp@alien8.de \
--cc=gratian.crisan@ni.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=luto@kernel.org \
--cc=mingo@kernel.org \
--cc=tglx@linutronix.de \
--cc=toshi.kani@hpe.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).