From: tip-bot for Thomas Renninger <trenn@suse.de>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@kernel.org,
yinghai@kernel.org, lenb@kernel.org, eric.piel@tremplin-utc.net,
tglx@linutronix.de, trenn@suse.de, hpa@linux.intel.com,
robert.moore@intel.com
Subject: [tip:x86/acpi] ACPI: Implement physical address table override
Date: Thu, 27 Sep 2012 18:44:31 -0700 [thread overview]
Message-ID: <tip-6fd61f98ef5afcf1841bcd1aaf792f9ad42d16bc@git.kernel.org> (raw)
In-Reply-To: <1348661941-71287-5-git-send-email-trenn@suse.de>
Commit-ID: 6fd61f98ef5afcf1841bcd1aaf792f9ad42d16bc
Gitweb: http://git.kernel.org/tip/6fd61f98ef5afcf1841bcd1aaf792f9ad42d16bc
Author: Thomas Renninger <trenn@suse.de>
AuthorDate: Wed, 26 Sep 2012 14:18:59 +0200
Committer: H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 27 Sep 2012 15:01:30 -0700
ACPI: Implement physical address table override
Previous patches stored ACPI tables provided via initrd in a memblock reserved
area.
If a table is loaded and the table type of an initrd provided one matches,
the one from initrd is prefered.
In case of a SSDT table, the OEM table id also has to match.
ACPI tables can be loaded at boot time (static table pointers in XSDT),
but also dynamically any time later via ASL commands load() or loadTable().
The override mechanism always works.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Link: http://lkml.kernel.org/r/1348661941-71287-5-git-send-email-trenn@suse.de
Cc: Len Brown <lenb@kernel.org>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
drivers/acpi/osl.c | 60 ++++++++++++++++++++++++++++++++++++++++++++++++---
1 files changed, 56 insertions(+), 4 deletions(-)
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index b20b079..007224b 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -681,12 +681,64 @@ acpi_os_table_override(struct acpi_table_header * existing_table,
acpi_status
acpi_os_physical_table_override(struct acpi_table_header *existing_table,
- acpi_physical_address * new_address,
- u32 *new_table_length)
+ acpi_physical_address *address,
+ u32 *table_length)
{
- return AE_SUPPORT;
-}
+#ifndef CONFIG_ACPI_INITRD_TABLE_OVERRIDE
+ *table_length = 0;
+ *address = 0;
+ return AE_OK;
+#else
+ int table_offset = 0;
+ struct acpi_table_header *table;
+
+ *table_length = 0;
+ *address = 0;
+
+ if (!acpi_tables_addr)
+ return AE_OK;
+
+ do {
+ if (table_offset + ACPI_HEADER_SIZE > all_tables_size) {
+ WARN_ON(1);
+ return AE_OK;
+ }
+
+ table = acpi_os_map_memory(acpi_tables_addr + table_offset,
+ ACPI_HEADER_SIZE);
+
+ if (table_offset + table->length > all_tables_size) {
+ acpi_os_unmap_memory(table, ACPI_HEADER_SIZE);
+ WARN_ON(1);
+ return AE_OK;
+ }
+ table_offset += table->length;
+
+ if (memcmp(existing_table->signature, table->signature, 4)) {
+ acpi_os_unmap_memory(table,
+ ACPI_HEADER_SIZE);
+ continue;
+ }
+
+ /* Only override tables with matching oem id */
+ if (memcmp(table->oem_table_id, existing_table->oem_table_id,
+ ACPI_OEM_TABLE_ID_SIZE)) {
+ acpi_os_unmap_memory(table,
+ ACPI_HEADER_SIZE);
+ continue;
+ }
+
+ table_offset -= table->length;
+ *table_length = table->length;
+ acpi_os_unmap_memory(table, ACPI_HEADER_SIZE);
+ *address = acpi_tables_addr + table_offset;
+ break;
+ } while (table_offset + ACPI_HEADER_SIZE < all_tables_size);
+
+ return AE_OK;
+#endif
+}
static irqreturn_t acpi_irq(int irq, void *dev_id)
{
next parent reply other threads:[~2012-09-28 1:44 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1348661941-71287-5-git-send-email-trenn@suse.de>
2012-09-28 1:44 ` tip-bot for Thomas Renninger [this message]
[not found] <1349043837-22659-5-git-send-email-trenn@suse.de>
2012-10-01 3:38 ` [tip:x86/acpi] ACPI: Implement physical address table override tip-bot for Thomas Renninger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-6fd61f98ef5afcf1841bcd1aaf792f9ad42d16bc@git.kernel.org \
--to=trenn@suse.de \
--cc=eric.piel@tremplin-utc.net \
--cc=hpa@linux.intel.com \
--cc=hpa@zytor.com \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=robert.moore@intel.com \
--cc=tglx@linutronix.de \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).