From: tip-bot for Aravind Gopalakrishnan <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: Aravind.Gopalakrishnan@amd.com, linux-kernel@vger.kernel.org,
tglx@linutronix.de, hpa@zytor.com, x86@kernel.org,
linux-edac@vger.kernel.org, mingo@kernel.org,
tony.luck@intel.com, bp@suse.de
Subject: [tip:x86/core] x86/mce: Add support for deferred errors on AMD
Date: Sun, 7 Jun 2015 10:37:16 -0700 [thread overview]
Message-ID: <tip-7559e13fb4abe7880dfaf985d6a1630ca90a67ce@git.kernel.org> (raw)
In-Reply-To: <1430913538-1415-4-git-send-email-Aravind.Gopalakrishnan@amd.com>
Commit-ID: 7559e13fb4abe7880dfaf985d6a1630ca90a67ce
Gitweb: http://git.kernel.org/tip/7559e13fb4abe7880dfaf985d6a1630ca90a67ce
Author: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
AuthorDate: Wed, 6 May 2015 06:58:55 -0500
Committer: Borislav Petkov <bp@suse.de>
CommitDate: Wed, 6 May 2015 20:34:31 +0200
x86/mce: Add support for deferred errors on AMD
Deferred errors indicate error conditions that were not corrected, but
those errors have not been consumed yet. They require no action from
S/W (or action is optional). These errors provide info about a latent
uncorrectable MCE that can occur when a poisoned data is consumed by the
processor.
Newer AMD processors can generate deferred errors and can be configured
to generate APIC interrupts on such events.
SUCCOR stands for S/W UnCorrectable error COntainment and Recovery.
It indicates support for data poisoning in HW and deferred error
interrupts.
Add new bitfield to mce_vendor_flags for this. We use this to verify
presence of deferred error interrupts before we enable them in mce_amd.c
While at it, clarify comments in mce_vendor_flags to provide an
indication of usages of the bitfields.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1430913538-1415-4-git-send-email-Aravind.Gopalakrishnan@amd.com
[ beef up commit message, do CPUID(8000_0007) only once. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
---
arch/x86/include/asm/mce.h | 15 +++++++++++++--
arch/x86/kernel/cpu/mcheck/mce.c | 10 ++++++++--
2 files changed, 21 insertions(+), 4 deletions(-)
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 1f5a86d..407ced6 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -117,8 +117,19 @@ struct mca_config {
};
struct mce_vendor_flags {
- __u64 overflow_recov : 1, /* cpuid_ebx(80000007) */
- __reserved_0 : 63;
+ /*
+ * overflow recovery cpuid bit indicates that overflow
+ * conditions are not fatal
+ */
+ __u64 overflow_recov : 1,
+
+ /*
+ * SUCCOR stands for S/W UnCorrectable error COntainment
+ * and Recovery. It indicates support for data poisoning
+ * in HW and deferred error interrupts.
+ */
+ succor : 1,
+ __reserved_0 : 62;
};
extern struct mce_vendor_flags mce_flags;
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index e535533..521e501 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1637,10 +1637,16 @@ static void __mcheck_cpu_init_vendor(struct cpuinfo_x86 *c)
mce_intel_feature_init(c);
mce_adjust_timer = cmci_intel_adjust_timer;
break;
- case X86_VENDOR_AMD:
+
+ case X86_VENDOR_AMD: {
+ u32 ebx = cpuid_ebx(0x80000007);
+
mce_amd_feature_init(c);
- mce_flags.overflow_recov = cpuid_ebx(0x80000007) & 0x1;
+ mce_flags.overflow_recov = !!(ebx & BIT(0));
+ mce_flags.succor = !!(ebx & BIT(1));
break;
+ }
+
default:
break;
}
next prev parent reply other threads:[~2015-06-07 17:38 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-06 11:58 [PATCH V2 0/6] Enable deferred error interrupts Aravind Gopalakrishnan
2015-05-06 11:58 ` [PATCH V2 1/6] x86/MCE/AMD: Factor out logging mechanism Aravind Gopalakrishnan
2015-05-06 17:41 ` Borislav Petkov
2015-05-06 17:47 ` Aravind Gopalakrishnan
2015-06-07 17:36 ` [tip:x86/core] x86/mce/amd: " tip-bot for Aravind Gopalakrishnan
2015-05-06 11:58 ` [PATCH V2 2/6] x86/MCE/AMD: Read MCx_ADDR(bank) before we log the error Aravind Gopalakrishnan
2015-06-07 17:37 ` [tip:x86/core] x86/mce/amd: Collect valid address before logging an error tip-bot for Aravind Gopalakrishnan
2015-05-06 11:58 ` [PATCH V2 3/6] x86/mce: Define 'SUCCOR' cpuid bit Aravind Gopalakrishnan
2015-05-06 18:49 ` Borislav Petkov
2015-06-07 17:37 ` tip-bot for Aravind Gopalakrishnan [this message]
2015-05-06 11:58 ` [PATCH V2 4/6] x86/MCE/AMD: Introduce deferred error interrupt handler Aravind Gopalakrishnan
2015-05-07 8:24 ` Borislav Petkov
2015-06-07 17:37 ` [tip:x86/core] x86/mce/amd: " tip-bot for Aravind Gopalakrishnan
2015-05-06 11:58 ` [PATCH V2 5/6] x86, irq: Cleanup ordering of vector numbers Aravind Gopalakrishnan
2015-05-07 8:29 ` Borislav Petkov
2015-06-07 17:37 ` [tip:x86/core] x86/irq: " tip-bot for Aravind Gopalakrishnan
2015-05-06 11:58 ` [PATCH V2 6/6] x86/MCE/AMD: Rename setup_APIC_mce Aravind Gopalakrishnan
2015-05-07 8:34 ` Borislav Petkov
2015-06-07 17:38 ` [tip:x86/core] x86/mce/amd: " tip-bot for Aravind Gopalakrishnan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-7559e13fb4abe7880dfaf985d6a1630ca90a67ce@git.kernel.org \
--to=tipbot@zytor.com \
--cc=Aravind.Gopalakrishnan@amd.com \
--cc=bp@suse.de \
--cc=hpa@zytor.com \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=tglx@linutronix.de \
--cc=tony.luck@intel.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox