linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "tip-bot for Luis R. Rodriguez" <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: daniel.vetter@ffwll.ch, mingo@kernel.org, tomi.valkeinen@ti.com,
	robdclark@gmail.com, airlied@redhat.com, mgorman@suse.de,
	toshi.kani@hp.com, minipli@googlemail.com,
	akpm@linux-foundation.org, syrjala@sci.fi, luto@amacapital.net,
	sbsiddha@gmail.com, dbueso@suse.de,
	torvalds@linux-foundation.org, hpa@zytor.com, jgross@suse.com,
	bp@suse.de, a.hajda@samsung.com, linux-kernel@vger.kernel.org,
	tglx@linutronix.de, peterz@infradead.org, adaplas@gmail.com,
	vbabka@suse.cz, plagnioj@jcrosoft.com, mcgrof@suse.com
Subject: [tip:x86/mm] drivers/video/fbdev/atyfb: Use arch_phys_wc_add() and ioremap_wc()
Date: Tue, 21 Jul 2015 02:43:51 -0700	[thread overview]
Message-ID: <tip-7d89a3cb159aecb1b363ea50cb14c967ff83b5a6@git.kernel.org> (raw)
In-Reply-To: <1436491499-3289-5-git-send-email-mcgrof@do-not-panic.com>

Commit-ID:  7d89a3cb159aecb1b363ea50cb14c967ff83b5a6
Gitweb:     http://git.kernel.org/tip/7d89a3cb159aecb1b363ea50cb14c967ff83b5a6
Author:     Luis R. Rodriguez <mcgrof@suse.com>
AuthorDate: Thu, 9 Jul 2015 18:24:59 -0700
Committer:  Ingo Molnar <mingo@kernel.org>
CommitDate: Tue, 21 Jul 2015 10:47:05 +0200

drivers/video/fbdev/atyfb: Use arch_phys_wc_add() and ioremap_wc()

This driver uses strong UC for the MMIO region, and ioremap_wc()
for the framebuffer to whitelist for the WC MTRR that can be
changed to WC. On PAT systems we don't need the MTRR call so
just use arch_phys_wc_add() there, this lets us remove all those
ifdefs. Let's also be consistent and use ioremap_wc() for ATARI
as well.

There are a few motivations for this:

  a) Take advantage of PAT when available.

  b) Help bury MTRR code away, MTRR is architecture specific and
     on x86 it is being replaced by PAT.

  c) Help with the goal of eventually using _PAGE_CACHE_UC over
     _PAGE_CACHE_UC_MINUS on x86 on ioremap_nocache() (see commit
     de33c442e titled "x86 PAT: fix performance drop for glx,
     use UC minus for ioremap(), ioremap_nocache() and
     pci_mmap_page_range()").

The conversion done is expressed by the following Coccinelle
SmPL patch, it additionally required manual intervention to
address all the ifdeffery and removal of redundant things which
arch_phys_wc_add() already addresses such as verbose message
about when MTRR fails and doing nothing when we didn't get an
MTRR:

	@ mtrr_found @
	expression index, base, size;
	@@

	-index = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1);
	+index = arch_phys_wc_add(base, size);

	@ mtrr_rm depends on mtrr_found @
	expression mtrr_found.index, mtrr_found.base, mtrr_found.size;
	@@

	-mtrr_del(index, base, size);
	+arch_phys_wc_del(index);

	@ mtrr_rm_zero_arg depends on mtrr_found @
	expression mtrr_found.index;
	@@

	-mtrr_del(index, 0, 0);
	+arch_phys_wc_del(index);

	@ mtrr_rm_fb_info depends on mtrr_found @
	struct fb_info *info;
	expression mtrr_found.index;
	@@

	-mtrr_del(index, info->fix.smem_start, info->fix.smem_len);
	+arch_phys_wc_del(index);

	@ ioremap_replace_nocache depends on mtrr_found @
	struct fb_info *info;
	expression base, size;
	@@

	-info->screen_base = ioremap_nocache(base, size);
	+info->screen_base = ioremap_wc(base, size);

	@ ioremap_replace_default depends on mtrr_found @
	struct fb_info *info;
	expression base, size;
	@@

	-info->screen_base = ioremap(base, size);
	+info->screen_base = ioremap_wc(base, size);

Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Ville Syrjälä <syrjala@sci.fi>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: arnd@arndb.de
Cc: benh@kernel.crashing.org
Cc: dan.j.williams@intel.com
Cc: geert@linux-m68k.org
Cc: hch@lst.de
Cc: hmh@hmh.eng.br
Cc: linux-fbdev@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-pci@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: mst@redhat.com
Cc: ralf@linux-mips.org
Cc: ross.zwisler@linux.intel.com
Cc: stefan.bader@canonical.com
Cc: tj@kernel.org
Cc: ville.syrjala@linux.intel.com
Link: http://lkml.kernel.org/r/1436491499-3289-5-git-send-email-mcgrof@do-not-panic.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 drivers/video/fbdev/aty/atyfb.h      |  4 +---
 drivers/video/fbdev/aty/atyfb_base.c | 36 +++++++-----------------------------
 2 files changed, 8 insertions(+), 32 deletions(-)

diff --git a/drivers/video/fbdev/aty/atyfb.h b/drivers/video/fbdev/aty/atyfb.h
index 89ec439..63c4842 100644
--- a/drivers/video/fbdev/aty/atyfb.h
+++ b/drivers/video/fbdev/aty/atyfb.h
@@ -182,9 +182,7 @@ struct atyfb_par {
 	unsigned long irq_flags;
 	unsigned int irq;
 	spinlock_t int_lock;
-#ifdef CONFIG_MTRR
-	int mtrr_aper;
-#endif
+	int wc_cookie;
 	u32 mem_cntl;
 	struct crtc saved_crtc;
 	union aty_pll saved_pll;
diff --git a/drivers/video/fbdev/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c
index 7770a84..f34ed47 100644
--- a/drivers/video/fbdev/aty/atyfb_base.c
+++ b/drivers/video/fbdev/aty/atyfb_base.c
@@ -98,9 +98,6 @@
 #ifdef CONFIG_PMAC_BACKLIGHT
 #include <asm/backlight.h>
 #endif
-#ifdef CONFIG_MTRR
-#include <asm/mtrr.h>
-#endif
 
 /*
  * Debug flags.
@@ -303,9 +300,7 @@ static struct fb_ops atyfb_ops = {
 };
 
 static bool noaccel;
-#ifdef CONFIG_MTRR
 static bool nomtrr;
-#endif
 static int vram;
 static int pll;
 static int mclk;
@@ -2628,17 +2623,13 @@ static int aty_init(struct fb_info *info)
 		aty_st_le32(BUS_CNTL, aty_ld_le32(BUS_CNTL, par) |
 			    BUS_APER_REG_DIS, par);
 
-#ifdef CONFIG_MTRR
-	par->mtrr_aper = -1;
-	if (!nomtrr) {
+	if (!nomtrr)
 		/*
 		 * Only the ioremap_wc()'d area will get WC here
 		 * since ioremap_uc() was used on the entire PCI BAR.
 		 */
-		par->mtrr_aper = mtrr_add(par->res_start, par->res_size,
-					  MTRR_TYPE_WRCOMB, 1);
-	}
-#endif
+		par->wc_cookie = arch_phys_wc_add(par->res_start,
+						  par->res_size);
 
 	info->fbops = &atyfb_ops;
 	info->pseudo_palette = par->pseudo_palette;
@@ -2766,13 +2757,8 @@ aty_init_exit:
 	/* restore video mode */
 	aty_set_crtc(par, &par->saved_crtc);
 	par->pll_ops->set_pll(info, &par->saved_pll);
+	arch_phys_wc_del(par->wc_cookie);
 
-#ifdef CONFIG_MTRR
-	if (par->mtrr_aper >= 0) {
-		mtrr_del(par->mtrr_aper, 0, 0);
-		par->mtrr_aper = -1;
-	}
-#endif
 	return ret;
 }
 
@@ -3672,7 +3658,8 @@ static int __init atyfb_atari_probe(void)
 		 * Map the video memory (physical address given)
 		 * to somewhere in the kernel address space.
 		 */
-		info->screen_base = ioremap(phys_vmembase[m64_num], phys_size[m64_num]);
+		info->screen_base = ioremap_wc(phys_vmembase[m64_num],
+					       phys_size[m64_num]);
 		info->fix.smem_start = (unsigned long)info->screen_base; /* Fake! */
 		par->ati_regbase = ioremap(phys_guiregbase[m64_num], 0x10000) +
 						0xFC00ul;
@@ -3738,13 +3725,8 @@ static void atyfb_remove(struct fb_info *info)
 	if (M64_HAS(MOBIL_BUS))
 		aty_bl_exit(info->bl_dev);
 #endif
+	arch_phys_wc_del(par->wc_cookie);
 
-#ifdef CONFIG_MTRR
-	if (par->mtrr_aper >= 0) {
-		mtrr_del(par->mtrr_aper, 0, 0);
-		par->mtrr_aper = -1;
-	}
-#endif
 #ifndef __sparc__
 	if (par->ati_regbase)
 		iounmap(par->ati_regbase);
@@ -3860,10 +3842,8 @@ static int __init atyfb_setup(char *options)
 	while ((this_opt = strsep(&options, ",")) != NULL) {
 		if (!strncmp(this_opt, "noaccel", 7)) {
 			noaccel = 1;
-#ifdef CONFIG_MTRR
 		} else if (!strncmp(this_opt, "nomtrr", 6)) {
 			nomtrr = 1;
-#endif
 		} else if (!strncmp(this_opt, "vram:", 5))
 			vram = simple_strtoul(this_opt + 5, NULL, 0);
 		else if (!strncmp(this_opt, "pll:", 4))
@@ -4033,7 +4013,5 @@ module_param(comp_sync, int, 0);
 MODULE_PARM_DESC(comp_sync, "Set composite sync signal to low (0) or high (1)");
 module_param(mode, charp, 0);
 MODULE_PARM_DESC(mode, "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
-#ifdef CONFIG_MTRR
 module_param(nomtrr, bool, 0);
 MODULE_PARM_DESC(nomtrr, "bool: disable use of MTRR registers");
-#endif

  reply	other threads:[~2015-07-21  9:47 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-10  1:24 [PATCH v6 0/4] atyfb: atyfb: address MTRR corner case Luis R. Rodriguez
2015-07-10  1:24 ` [PATCH v6 1/4] drivers/video/fbdev/atyfb: Carve out framebuffer length fudging into a helper Luis R. Rodriguez
2015-07-21  9:42   ` [tip:x86/mm] " tip-bot for Luis R. Rodriguez
2015-07-10  1:24 ` [PATCH v6 2/4] drivers/video/fbdev/atyfb: Clarify ioremap() base and length used Luis R. Rodriguez
2015-07-21  9:43   ` [tip:x86/mm] " tip-bot for Luis R. Rodriguez
2015-07-10  1:24 ` [PATCH v6 3/4] drivers/video/fbdev/atyfb: Replace MTRR UC hole with strong UC Luis R. Rodriguez
2015-07-21  9:43   ` [tip:x86/mm] " tip-bot for Luis R. Rodriguez
2015-07-10  1:24 ` [PATCH v6 4/4] drivers/video/fbdev/atyfb: Use arch_phys_wc_add() and ioremap_wc() Luis R. Rodriguez
2015-07-21  9:43   ` tip-bot for Luis R. Rodriguez [this message]
2015-07-17 20:37 ` [PATCH v6 0/4] atyfb: atyfb: address MTRR corner case Luis R. Rodriguez
  -- strict thread matches above, loose matches on Subject: below --
2015-06-25  1:34 [PATCH v5 0/3] " Luis R. Rodriguez
2015-06-25  1:34 ` [PATCH v5 1/3] video: fbdev: atyfb: clarify ioremap() base and length used Luis R. Rodriguez
2015-06-25 23:04   ` Ville Syrjälä
2015-06-25 23:06     ` Luis R. Rodriguez
2015-06-25 23:11       ` Ville Syrjälä
2015-06-26  1:09         ` Luis R. Rodriguez
2015-06-26  7:30           ` Borislav Petkov
2015-07-02 23:23             ` Luis R. Rodriguez
2015-07-08  0:24               ` Luis R. Rodriguez
2015-07-08  8:38                 ` Ville Syrjälä
2015-07-09 17:25                   ` Luis R. Rodriguez
2015-06-25  1:34 ` [PATCH v5 2/3] video: fbdev: atyfb: replace MTRR UC hole with strong UC Luis R. Rodriguez
2015-06-25  1:34 ` [PATCH v5 3/3] video: fbdev: atyfb: use arch_phys_wc_add() and ioremap_wc() Luis R. Rodriguez
2015-06-25 16:43 ` [PATCH v5 0/3] atyfb: address MTRR corner case Luis R. Rodriguez
2015-06-25 20:48 ` Borislav Petkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=tip-7d89a3cb159aecb1b363ea50cb14c967ff83b5a6@git.kernel.org \
    --to=tipbot@zytor.com \
    --cc=a.hajda@samsung.com \
    --cc=adaplas@gmail.com \
    --cc=airlied@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=bp@suse.de \
    --cc=daniel.vetter@ffwll.ch \
    --cc=dbueso@suse.de \
    --cc=hpa@zytor.com \
    --cc=jgross@suse.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tip-commits@vger.kernel.org \
    --cc=luto@amacapital.net \
    --cc=mcgrof@suse.com \
    --cc=mgorman@suse.de \
    --cc=mingo@kernel.org \
    --cc=minipli@googlemail.com \
    --cc=peterz@infradead.org \
    --cc=plagnioj@jcrosoft.com \
    --cc=robdclark@gmail.com \
    --cc=sbsiddha@gmail.com \
    --cc=syrjala@sci.fi \
    --cc=tglx@linutronix.de \
    --cc=tomi.valkeinen@ti.com \
    --cc=torvalds@linux-foundation.org \
    --cc=toshi.kani@hp.com \
    --cc=vbabka@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).