From: tip-bot for Shaohua Li <shaohua.li@intel.com>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@redhat.com,
eric.dumazet@gmail.com, shaohua.li@intel.com, tglx@linutronix.de,
hpa@linux.intel.com
Subject: [tip:x86/mm] x86: Spread tlb flush vector between nodes
Date: Wed, 20 Oct 2010 23:07:21 GMT [thread overview]
Message-ID: <tip-932967202182743c01a2eee4bdfa2c42697bc586@git.kernel.org> (raw)
In-Reply-To: <1287544023.4571.8.camel@sli10-conroe.sh.intel.com>
Commit-ID: 932967202182743c01a2eee4bdfa2c42697bc586
Gitweb: http://git.kernel.org/tip/932967202182743c01a2eee4bdfa2c42697bc586
Author: Shaohua Li <shaohua.li@intel.com>
AuthorDate: Wed, 20 Oct 2010 11:07:03 +0800
Committer: H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Wed, 20 Oct 2010 14:44:42 -0700
x86: Spread tlb flush vector between nodes
Currently flush tlb vector allocation is based on below equation:
sender = smp_processor_id() % 8
This isn't optimal, CPUs from different node can have the same vector, this
causes a lot of lock contention. Instead, we can assign the same vectors to
CPUs from the same node, while different node has different vectors. This has
below advantages:
a. if there is lock contention, the lock contention is between CPUs from one
node. This should be much cheaper than the contention between nodes.
b. completely avoid lock contention between nodes. This especially benefits
kswapd, which is the biggest user of tlb flush, since kswapd sets its affinity
to specific node.
In my test, this could reduce > 20% CPU overhead in extreme case.The test
machine has 4 nodes and each node has 16 CPUs. I then bind each node's kswapd
to the first CPU of the node. I run a workload with 4 sequential mmap file
read thread. The files are empty sparse file. This workload will trigger a
lot of page reclaim and tlbflush. The kswapd bind is to easy trigger the
extreme tlb flush lock contention because otherwise kswapd keeps migrating
between CPUs of a node and I can't get stable result. Sure in real workload,
we can't always see so big tlb flush lock contention, but it's possible.
[ hpa: folded in fix from Eric Dumazet to use this_cpu_read() ]
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
LKML-Reference: <1287544023.4571.8.camel@sli10-conroe.sh.intel.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
arch/x86/mm/tlb.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 47 insertions(+), 1 deletions(-)
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index c03f14a..4935848 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -5,6 +5,7 @@
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/cpu.h>
#include <asm/tlbflush.h>
#include <asm/mmu_context.h>
@@ -52,6 +53,8 @@ union smp_flush_state {
want false sharing in the per cpu data segment. */
static union smp_flush_state flush_state[NUM_INVALIDATE_TLB_VECTORS];
+static DEFINE_PER_CPU_READ_MOSTLY(int, tlb_vector_offset);
+
/*
* We cannot call mmdrop() because we are in interrupt context,
* instead update mm->cpu_vm_mask.
@@ -173,7 +176,7 @@ static void flush_tlb_others_ipi(const struct cpumask *cpumask,
union smp_flush_state *f;
/* Caller has disabled preemption */
- sender = smp_processor_id() % NUM_INVALIDATE_TLB_VECTORS;
+ sender = this_cpu_read(tlb_vector_offset);
f = &flush_state[sender];
/*
@@ -218,6 +221,47 @@ void native_flush_tlb_others(const struct cpumask *cpumask,
flush_tlb_others_ipi(cpumask, mm, va);
}
+static void __cpuinit calculate_tlb_offset(void)
+{
+ int cpu, node, nr_node_vecs;
+ /*
+ * we are changing tlb_vector_offset for each CPU in runtime, but this
+ * will not cause inconsistency, as the write is atomic under X86. we
+ * might see more lock contentions in a short time, but after all CPU's
+ * tlb_vector_offset are changed, everything should go normal
+ *
+ * Note: if NUM_INVALIDATE_TLB_VECTORS % nr_online_nodes !=0, we might
+ * waste some vectors.
+ **/
+ if (nr_online_nodes > NUM_INVALIDATE_TLB_VECTORS)
+ nr_node_vecs = 1;
+ else
+ nr_node_vecs = NUM_INVALIDATE_TLB_VECTORS/nr_online_nodes;
+
+ for_each_online_node(node) {
+ int node_offset = (node % NUM_INVALIDATE_TLB_VECTORS) *
+ nr_node_vecs;
+ int cpu_offset = 0;
+ for_each_cpu(cpu, cpumask_of_node(node)) {
+ per_cpu(tlb_vector_offset, cpu) = node_offset +
+ cpu_offset;
+ cpu_offset++;
+ cpu_offset = cpu_offset % nr_node_vecs;
+ }
+ }
+}
+
+static int tlb_cpuhp_notify(struct notifier_block *n,
+ unsigned long action, void *hcpu)
+{
+ switch (action & 0xf) {
+ case CPU_ONLINE:
+ case CPU_DEAD:
+ calculate_tlb_offset();
+ }
+ return NOTIFY_OK;
+}
+
static int __cpuinit init_smp_flush(void)
{
int i;
@@ -225,6 +269,8 @@ static int __cpuinit init_smp_flush(void)
for (i = 0; i < ARRAY_SIZE(flush_state); i++)
raw_spin_lock_init(&flush_state[i].tlbstate_lock);
+ calculate_tlb_offset();
+ hotcpu_notifier(tlb_cpuhp_notify, 0);
return 0;
}
core_initcall(init_smp_flush);
prev parent reply other threads:[~2010-10-20 23:07 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-20 3:07 [PATCH 2/2]x86: spread tlb flush vector between nodes Shaohua Li
2010-10-20 5:16 ` Eric Dumazet
2010-10-20 7:31 ` Andi Kleen
2010-10-20 11:20 ` Peter Zijlstra
2010-10-20 12:06 ` Andi Kleen
2010-10-20 12:08 ` Peter Zijlstra
2010-10-20 12:18 ` Andi Kleen
2010-10-20 7:30 ` Andi Kleen
2010-10-20 8:44 ` Shaohua Li
2010-10-20 23:07 ` tip-bot for Shaohua Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-932967202182743c01a2eee4bdfa2c42697bc586@git.kernel.org \
--to=shaohua.li@intel.com \
--cc=eric.dumazet@gmail.com \
--cc=hpa@linux.intel.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox