From: "tip-bot for Kirill A. Shutemov" <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: kirill.shutemov@linux.intel.com, linux-kernel@vger.kernel.org,
hpa@zytor.com, dave.hansen@intel.com, tglx@linutronix.de,
torvalds@linux-foundation.org, mingo@kernel.org,
peterz@infradead.org, kai.huang@linux.intel.com,
thomas.lendacky@amd.com
Subject: [tip:x86/mm] x86/pconfig: Detect PCONFIG targets
Date: Mon, 12 Mar 2018 05:22:31 -0700 [thread overview]
Message-ID: <tip-be7825c19b4866ddc7b1431740b69ede2eeb93c1@git.kernel.org> (raw)
In-Reply-To: <20180305162610.37510-5-kirill.shutemov@linux.intel.com>
Commit-ID: be7825c19b4866ddc7b1431740b69ede2eeb93c1
Gitweb: https://git.kernel.org/tip/be7825c19b4866ddc7b1431740b69ede2eeb93c1
Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
AuthorDate: Mon, 5 Mar 2018 19:25:52 +0300
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Mon, 12 Mar 2018 12:10:54 +0100
x86/pconfig: Detect PCONFIG targets
Intel PCONFIG targets are enumerated via new CPUID leaf 0x1b. This patch
detects all supported targets of PCONFIG and implements helper to check
if the target is supported.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kai Huang <kai.huang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180305162610.37510-5-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
arch/x86/include/asm/intel_pconfig.h | 15 +++++++
arch/x86/kernel/cpu/Makefile | 2 +-
arch/x86/kernel/cpu/intel_pconfig.c | 82 ++++++++++++++++++++++++++++++++++++
3 files changed, 98 insertions(+), 1 deletion(-)
diff --git a/arch/x86/include/asm/intel_pconfig.h b/arch/x86/include/asm/intel_pconfig.h
new file mode 100644
index 000000000000..fb7a37c3798b
--- /dev/null
+++ b/arch/x86/include/asm/intel_pconfig.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_X86_INTEL_PCONFIG_H
+#define _ASM_X86_INTEL_PCONFIG_H
+
+#include <asm/asm.h>
+#include <asm/processor.h>
+
+enum pconfig_target {
+ INVALID_TARGET = 0,
+ MKTME_TARGET = 1,
+ PCONFIG_TARGET_NR
+};
+
+int pconfig_target_supported(enum pconfig_target target);
+
+#endif /* _ASM_X86_INTEL_PCONFIG_H */
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 570e8bb1f386..a66229f51b12 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -28,7 +28,7 @@ obj-y += cpuid-deps.o
obj-$(CONFIG_PROC_FS) += proc.o
obj-$(CONFIG_X86_FEATURE_NAMES) += capflags.o powerflags.o
-obj-$(CONFIG_CPU_SUP_INTEL) += intel.o
+obj-$(CONFIG_CPU_SUP_INTEL) += intel.o intel_pconfig.o
obj-$(CONFIG_CPU_SUP_AMD) += amd.o
obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix.o
obj-$(CONFIG_CPU_SUP_CENTAUR) += centaur.o
diff --git a/arch/x86/kernel/cpu/intel_pconfig.c b/arch/x86/kernel/cpu/intel_pconfig.c
new file mode 100644
index 000000000000..0771a905b286
--- /dev/null
+++ b/arch/x86/kernel/cpu/intel_pconfig.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel PCONFIG instruction support.
+ *
+ * Copyright (C) 2017 Intel Corporation
+ *
+ * Author:
+ * Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
+ */
+
+#include <asm/cpufeature.h>
+#include <asm/intel_pconfig.h>
+
+#define PCONFIG_CPUID 0x1b
+
+#define PCONFIG_CPUID_SUBLEAF_MASK ((1 << 12) - 1)
+
+/* Subleaf type (EAX) for PCONFIG CPUID leaf (0x1B) */
+enum {
+ PCONFIG_CPUID_SUBLEAF_INVALID = 0,
+ PCONFIG_CPUID_SUBLEAF_TARGETID = 1,
+};
+
+/* Bitmask of supported targets */
+static u64 targets_supported __read_mostly;
+
+int pconfig_target_supported(enum pconfig_target target)
+{
+ /*
+ * We would need to re-think the implementation once we get > 64
+ * PCONFIG targets. Spec allows up to 2^32 targets.
+ */
+ BUILD_BUG_ON(PCONFIG_TARGET_NR >= 64);
+
+ if (WARN_ON_ONCE(target >= 64))
+ return 0;
+ return targets_supported & (1ULL << target);
+}
+
+static int __init intel_pconfig_init(void)
+{
+ int subleaf;
+
+ if (!boot_cpu_has(X86_FEATURE_PCONFIG))
+ return 0;
+
+ /*
+ * Scan subleafs of PCONFIG CPUID leaf.
+ *
+ * Subleafs of the same type need not to be consecutive.
+ *
+ * Stop on the first invalid subleaf type. All subleafs after the first
+ * invalid are invalid too.
+ */
+ for (subleaf = 0; subleaf < INT_MAX; subleaf++) {
+ struct cpuid_regs regs;
+
+ cpuid_count(PCONFIG_CPUID, subleaf,
+ ®s.eax, ®s.ebx, ®s.ecx, ®s.edx);
+
+ switch (regs.eax & PCONFIG_CPUID_SUBLEAF_MASK) {
+ case PCONFIG_CPUID_SUBLEAF_INVALID:
+ /* Stop on the first invalid subleaf */
+ goto out;
+ case PCONFIG_CPUID_SUBLEAF_TARGETID:
+ /* Mark supported PCONFIG targets */
+ if (regs.ebx < 64)
+ targets_supported |= (1ULL << regs.ebx);
+ if (regs.ecx < 64)
+ targets_supported |= (1ULL << regs.ecx);
+ if (regs.edx < 64)
+ targets_supported |= (1ULL << regs.edx);
+ break;
+ default:
+ /* Unknown CPUID.PCONFIG subleaf: ignore */
+ break;
+ }
+ }
+out:
+ return 0;
+}
+arch_initcall(intel_pconfig_init);
next prev parent reply other threads:[~2018-03-12 12:22 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-05 16:25 [RFC, PATCH 00/22] Partial MKTME enabling Kirill A. Shutemov
2018-03-05 16:25 ` [RFC, PATCH 01/22] x86/cpufeatures: Add Intel Total Memory Encryption cpufeature Kirill A. Shutemov
2018-03-12 12:20 ` [tip:x86/mm] " tip-bot for Kirill A. Shutemov
2018-03-05 16:25 ` [RFC, PATCH 02/22] x86/tme: Detect if TME and MKTME is activated by BIOS Kirill A. Shutemov
2018-03-12 12:21 ` [tip:x86/mm] " tip-bot for Kirill A. Shutemov
2018-03-13 2:12 ` Kai Huang
2018-03-13 12:49 ` Kirill A. Shutemov
2018-03-13 15:09 ` Dave Hansen
2018-03-13 22:07 ` Kai Huang
2018-03-05 16:25 ` [RFC, PATCH 03/22] x86/cpufeatures: Add Intel PCONFIG cpufeature Kirill A. Shutemov
2018-03-12 12:21 ` [tip:x86/mm] " tip-bot for Kirill A. Shutemov
2018-03-05 16:25 ` [RFC, PATCH 04/22] x86/pconfig: Detect PCONFIG targets Kirill A. Shutemov
2018-03-12 12:22 ` tip-bot for Kirill A. Shutemov [this message]
2018-03-05 16:25 ` [RFC, PATCH 05/22] x86/pconfig: Provide defines and helper to run MKTME_KEY_PROG leaf Kirill A. Shutemov
2018-03-12 12:23 ` [tip:x86/mm] " tip-bot for Kirill A. Shutemov
2018-03-05 16:25 ` [RFC, PATCH 06/22] x86/mm: Decouple dynamic __PHYSICAL_MASK from AMD SME Kirill A. Shutemov
2018-03-05 16:25 ` [RFC, PATCH 07/22] x86/mm: Mask out KeyID bits from page table entry pfn Kirill A. Shutemov
2018-03-22 15:55 ` Punit Agrawal
2018-03-05 16:25 ` [RFC, PATCH 08/22] mm: Introduce __GFP_ENCRYPT Kirill A. Shutemov
2018-03-22 16:02 ` Punit Agrawal
2018-03-05 16:25 ` [RFC, PATCH 09/22] mm, rmap: Add arch-specific field into anon_vma Kirill A. Shutemov
2018-03-05 16:25 ` [RFC, PATCH 10/22] mm/shmem: Zero out unused vma fields in shmem_pseudo_vma_init() Kirill A. Shutemov
2018-03-05 16:25 ` [RFC, PATCH 11/22] mm: Use __GFP_ENCRYPT for pages in encrypted VMAs Kirill A. Shutemov
2018-03-05 16:26 ` [RFC, PATCH 12/22] mm: Do no merge vma with different encryption KeyIDs Kirill A. Shutemov
2018-03-05 16:26 ` [RFC, PATCH 13/22] mm, rmap: Free encrypted pages once mapcount drops to zero Kirill A. Shutemov
2018-03-05 19:12 ` Dave Hansen
2018-03-06 8:18 ` Kirill A. Shutemov
2018-03-05 19:13 ` Dave Hansen
2018-03-06 8:27 ` Kirill A. Shutemov
2018-03-06 14:59 ` Dave Hansen
2018-03-06 15:00 ` Kirill A. Shutemov
2018-03-05 16:26 ` [RFC, PATCH 14/22] mm, khugepaged: Do not collapse pages in encrypted VMAs Kirill A. Shutemov
2018-03-05 16:26 ` [RFC, PATCH 15/22] x86/mm: Introduce variables to store number, shift and mask of KeyIDs Kirill A. Shutemov
2018-03-05 16:26 ` [RFC, PATCH 16/22] x86/mm: Preserve KeyID on pte_modify() and pgprot_modify() Kirill A. Shutemov
2018-03-05 19:09 ` Dave Hansen
2018-03-06 8:30 ` Kirill A. Shutemov
2018-03-05 16:26 ` [RFC, PATCH 17/22] x86/mm: Implement vma_is_encrypted() and vma_keyid() Kirill A. Shutemov
2018-03-05 16:26 ` [RFC, PATCH 18/22] x86/mm: Handle allocation of encrypted pages Kirill A. Shutemov
2018-03-05 19:03 ` Dave Hansen
2018-03-06 8:34 ` Kirill A. Shutemov
2018-03-05 19:07 ` Dave Hansen
2018-03-06 8:36 ` Kirill A. Shutemov
2018-03-05 16:26 ` [RFC, PATCH 19/22] x86/mm: Implement free_encrypt_page() Kirill A. Shutemov
2018-03-05 19:00 ` Dave Hansen
2018-03-06 8:38 ` Kirill A. Shutemov
2018-03-05 19:07 ` Dave Hansen
2018-03-06 8:54 ` Kirill A. Shutemov
2018-03-06 13:52 ` Dave Hansen
2018-03-06 14:09 ` Kirill A. Shutemov
2018-03-20 12:50 ` Kirill A. Shutemov
2018-03-27 14:44 ` Kirill A. Shutemov
2018-03-05 16:26 ` [RFC, PATCH 20/22] x86/mm: Implement anon_vma_encrypted() and anon_vma_keyid() Kirill A. Shutemov
2018-03-05 16:26 ` [RFC, PATCH 21/22] x86/mm: Introduce page_keyid() and page_encrypted() Kirill A. Shutemov
2018-03-05 17:08 ` Dave Hansen
2018-03-06 8:57 ` Kirill A. Shutemov
2018-03-06 14:56 ` Dave Hansen
2018-03-06 14:58 ` Kirill A. Shutemov
2018-03-06 15:04 ` Dave Hansen
2018-03-05 16:26 ` [RFC, PATCH 22/22] x86: Introduce CONFIG_X86_INTEL_MKTME Kirill A. Shutemov
2018-03-05 18:30 ` [RFC, PATCH 00/22] Partial MKTME enabling Christoph Hellwig
2018-03-05 19:05 ` Matthew Wilcox
2018-03-06 8:58 ` Kirill A. Shutemov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-be7825c19b4866ddc7b1431740b69ede2eeb93c1@git.kernel.org \
--to=tipbot@zytor.com \
--cc=dave.hansen@intel.com \
--cc=hpa@zytor.com \
--cc=kai.huang@linux.intel.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
--cc=thomas.lendacky@amd.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox