From: Pekka Enberg <penberg@cs.helsinki.fi>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@redhat.com,
yinghai@kernel.org, penberg@cs.helsinki.fi, tglx@linutronix.de,
mingo@elte.hu
Subject: [tip:x86/mm] x86: rename after_init_bootmem to after_bootmem in mm/init_32.c
Date: Thu, 5 Mar 2009 13:37:25 GMT [thread overview]
Message-ID: <tip-c464573cb3d3bdd45eed8f5f59596f84ede95a0c@git.kernel.org> (raw)
In-Reply-To: <1236257708-27269-7-git-send-email-penberg@cs.helsinki.fi>
Commit-ID: c464573cb3d3bdd45eed8f5f59596f84ede95a0c
Gitweb: http://git.kernel.org/tip/c464573cb3d3bdd45eed8f5f59596f84ede95a0c
Author: "Pekka Enberg" <penberg@cs.helsinki.fi>
AuthorDate: Thu, 5 Mar 2009 14:54:58 +0200
Commit: Ingo Molnar <mingo@elte.hu>
CommitDate: Thu, 5 Mar 2009 14:17:13 +0100
x86: rename after_init_bootmem to after_bootmem in mm/init_32.c
Impact: cleanup
This patch renames after_init_bootmem to after_bootmem in
mm/init_32.c to reduce the diff to the 64-bit version of of
init_memory_mapping().
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1236257708-27269-7-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
arch/x86/mm/init_32.c | 16 ++++++++--------
1 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 559715b..cc5c399 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -63,7 +63,7 @@ static unsigned long __initdata table_start;
static unsigned long __meminitdata table_end;
static unsigned long __meminitdata table_top;
-static int __initdata after_init_bootmem;
+int after_bootmem;
int direct_gbpages;
@@ -92,7 +92,7 @@ static pmd_t * __init one_md_table_init(pgd_t *pgd)
#ifdef CONFIG_X86_PAE
if (!(pgd_val(*pgd) & _PAGE_PRESENT)) {
- if (after_init_bootmem)
+ if (after_bootmem)
pmd_table = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE);
else
pmd_table = (pmd_t *)alloc_low_page();
@@ -119,7 +119,7 @@ static pte_t * __init one_page_table_init(pmd_t *pmd)
if (!(pmd_val(*pmd) & _PAGE_PRESENT)) {
pte_t *page_table = NULL;
- if (after_init_bootmem) {
+ if (after_bootmem) {
#ifdef CONFIG_DEBUG_PAGEALLOC
page_table = (pte_t *) alloc_bootmem_pages(PAGE_SIZE);
#endif
@@ -158,7 +158,7 @@ static pte_t *__init page_table_kmap_check(pte_t *pte, pmd_t *pmd,
pte_t *newpte;
int i;
- BUG_ON(after_init_bootmem);
+ BUG_ON(after_bootmem);
newpte = alloc_low_page();
for (i = 0; i < PTRS_PER_PTE; i++)
set_pte(newpte + i, pte[i]);
@@ -831,7 +831,7 @@ void __init setup_bootmem_allocator(void)
bootmap = setup_node_bootmem(0, 0, max_low_pfn, bootmap);
#endif
- after_init_bootmem = 1;
+ after_bootmem = 1;
}
static void __init find_early_table_space(unsigned long end, int use_pse,
@@ -1037,7 +1037,7 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
* memory mapped. Unfortunately this is done currently before the
* nodes are discovered.
*/
- if (!after_init_bootmem)
+ if (!after_bootmem)
find_early_table_space(end, use_pse, use_gbpages);
for (i = 0; i < nr_range; i++)
@@ -1052,11 +1052,11 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
__flush_tlb_all();
- if (!after_init_bootmem)
+ if (!after_bootmem)
reserve_early(table_start << PAGE_SHIFT,
table_end << PAGE_SHIFT, "PGTABLE");
- if (!after_init_bootmem)
+ if (!after_bootmem)
early_memtest(start, end);
return end >> PAGE_SHIFT;
next prev parent reply other threads:[~2009-03-05 13:40 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-05 12:54 [PATCH 07/17] x86: rename after_init_bootmem to after_bootmem in mm/init_32.c Pekka Enberg
2009-03-05 13:37 ` Pekka Enberg [this message]
2009-03-05 19:14 ` Yinghai Lu
[not found] ` <49B02C68.1030203@cs.helsinki.fi>
2009-03-05 23:45 ` [PATCH] x86: introduce bootmem_state Yinghai Lu
2009-03-06 6:14 ` H. Peter Anvin
2009-03-06 6:38 ` Yinghai Lu
2009-03-06 22:12 ` Jeremy Fitzhardinge
2009-03-06 23:34 ` H. Peter Anvin
2009-03-07 0:01 ` Andrew Morton
2009-03-07 0:10 ` Jeremy Fitzhardinge
2009-03-07 0:11 ` H. Peter Anvin
2009-03-06 14:59 ` Ingo Molnar
2009-03-06 18:20 ` Yinghai Lu
2009-03-06 18:38 ` [PATCH] x86: introduce bootmem_state -v2 Yinghai Lu
2009-03-06 19:12 ` Ingo Molnar
2009-03-06 19:30 ` Andrew Morton
2009-03-06 19:36 ` Ingo Molnar
2009-03-06 22:06 ` Jeremy Fitzhardinge
2009-03-06 19:50 ` Yinghai Lu
2009-03-06 20:15 ` Ingo Molnar
2009-03-06 20:40 ` Yinghai Lu
2009-03-06 21:35 ` Ingo Molnar
2009-03-07 0:49 ` [PATCH] x86: introduce bootmem_state -v3 Yinghai Lu
2009-03-08 18:54 ` [tip:kmemcheck] x86: introduce bootmem_state Yinghai Lu
2009-03-08 18:58 ` Ingo Molnar
2009-03-08 19:30 ` Yinghai Lu
2009-03-08 20:32 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-c464573cb3d3bdd45eed8f5f59596f84ede95a0c@git.kernel.org \
--to=penberg@cs.helsinki.fi \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox