From: tip-bot for Peter Zijlstra <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@kernel.org,
arjan@linux.intel.com, peterz@infradead.org, bitbucket@online.de,
tglx@linutronix.de
Subject: [tip:sched/idle] sched/preempt, locking: Rework local_bh_{dis, en}able()
Date: Sun, 12 Jan 2014 10:44:09 -0800 [thread overview]
Message-ID: <tip-c795eb55e74041a4b1e46a82bb07d8bd513fb066@git.kernel.org> (raw)
In-Reply-To: <20131119151338.GF3694@twins.programming.kicks-ass.net>
Commit-ID: c795eb55e74041a4b1e46a82bb07d8bd513fb066
Gitweb: http://git.kernel.org/tip/c795eb55e74041a4b1e46a82bb07d8bd513fb066
Author: Peter Zijlstra <peterz@infradead.org>
AuthorDate: Tue, 19 Nov 2013 16:13:38 +0100
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Sun, 12 Jan 2014 10:48:24 +0100
sched/preempt, locking: Rework local_bh_{dis,en}able()
Currently local_bh_disable() is out-of-line for no apparent reason.
So inline it to save a few cycles on call/return nonsense, the
function body is a single add on x86 (a few loads and store extra on
load/store archs).
Also expose two new local_bh functions:
__local_bh_{dis,en}able_ip(unsigned long ip, unsigned int cnt);
Which implement the actual local_bh_{dis,en}able() behaviour.
The next patch uses the exposed @cnt argument to optimize bh lock
functions.
With build fixes from Jacob Pan.
Cc: rjw@rjwysocki.net
Cc: rui.zhang@intel.com
Cc: jacob.jun.pan@linux.intel.com
Cc: Mike Galbraith <bitbucket@online.de>
Cc: hpa@zytor.com
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: lenb@kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131119151338.GF3694@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
include/linux/bottom_half.h | 32 +++++++++++++++++++++++++++++---
include/linux/hardirq.h | 1 +
include/linux/preempt_mask.h | 1 -
kernel/softirq.c | 35 ++++++-----------------------------
4 files changed, 36 insertions(+), 33 deletions(-)
diff --git a/include/linux/bottom_half.h b/include/linux/bottom_half.h
index 27b1bcf..86c12c9 100644
--- a/include/linux/bottom_half.h
+++ b/include/linux/bottom_half.h
@@ -1,9 +1,35 @@
#ifndef _LINUX_BH_H
#define _LINUX_BH_H
-extern void local_bh_disable(void);
+#include <linux/preempt.h>
+#include <linux/preempt_mask.h>
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+extern void __local_bh_disable_ip(unsigned long ip, unsigned int cnt);
+#else
+static __always_inline void __local_bh_disable_ip(unsigned long ip, unsigned int cnt)
+{
+ preempt_count_add(cnt);
+ barrier();
+}
+#endif
+
+static inline void local_bh_disable(void)
+{
+ __local_bh_disable_ip(_THIS_IP_, SOFTIRQ_DISABLE_OFFSET);
+}
+
extern void _local_bh_enable(void);
-extern void local_bh_enable(void);
-extern void local_bh_enable_ip(unsigned long ip);
+extern void __local_bh_enable_ip(unsigned long ip, unsigned int cnt);
+
+static inline void local_bh_enable_ip(unsigned long ip)
+{
+ __local_bh_enable_ip(ip, SOFTIRQ_DISABLE_OFFSET);
+}
+
+static inline void local_bh_enable(void)
+{
+ __local_bh_enable_ip(_THIS_IP_, SOFTIRQ_DISABLE_OFFSET);
+}
#endif /* _LINUX_BH_H */
diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index d9cf963..12d5f97 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -5,6 +5,7 @@
#include <linux/lockdep.h>
#include <linux/ftrace_irq.h>
#include <linux/vtime.h>
+#include <asm/hardirq.h>
extern void synchronize_irq(unsigned int irq);
diff --git a/include/linux/preempt_mask.h b/include/linux/preempt_mask.h
index d169820..30820ec 100644
--- a/include/linux/preempt_mask.h
+++ b/include/linux/preempt_mask.h
@@ -2,7 +2,6 @@
#define LINUX_PREEMPT_MASK_H
#include <linux/preempt.h>
-#include <asm/hardirq.h>
/*
* We put the hardirq and softirq counter into the preemption
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 9a4500e..2a4b5f4 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -89,7 +89,7 @@ static void wakeup_softirqd(void)
* where hardirqs are disabled legitimately:
*/
#ifdef CONFIG_TRACE_IRQFLAGS
-static void __local_bh_disable(unsigned long ip, unsigned int cnt)
+void __local_bh_disable_ip(unsigned long ip, unsigned int cnt)
{
unsigned long flags;
@@ -114,21 +114,9 @@ static void __local_bh_disable(unsigned long ip, unsigned int cnt)
if (preempt_count() == cnt)
trace_preempt_off(CALLER_ADDR0, get_parent_ip(CALLER_ADDR1));
}
-#else /* !CONFIG_TRACE_IRQFLAGS */
-static inline void __local_bh_disable(unsigned long ip, unsigned int cnt)
-{
- preempt_count_add(cnt);
- barrier();
-}
+EXPORT_SYMBOL(__local_bh_disable_ip);
#endif /* CONFIG_TRACE_IRQFLAGS */
-void local_bh_disable(void)
-{
- __local_bh_disable(_RET_IP_, SOFTIRQ_DISABLE_OFFSET);
-}
-
-EXPORT_SYMBOL(local_bh_disable);
-
static void __local_bh_enable(unsigned int cnt)
{
WARN_ON_ONCE(!irqs_disabled());
@@ -151,7 +139,7 @@ void _local_bh_enable(void)
EXPORT_SYMBOL(_local_bh_enable);
-static inline void _local_bh_enable_ip(unsigned long ip)
+void __local_bh_enable_ip(unsigned long ip, unsigned int cnt)
{
WARN_ON_ONCE(in_irq() || irqs_disabled());
#ifdef CONFIG_TRACE_IRQFLAGS
@@ -166,7 +154,7 @@ static inline void _local_bh_enable_ip(unsigned long ip)
* Keep preemption disabled until we are done with
* softirq processing:
*/
- preempt_count_sub(SOFTIRQ_DISABLE_OFFSET - 1);
+ preempt_count_sub(cnt - 1);
if (unlikely(!in_interrupt() && local_softirq_pending())) {
/*
@@ -182,18 +170,7 @@ static inline void _local_bh_enable_ip(unsigned long ip)
#endif
preempt_check_resched();
}
-
-void local_bh_enable(void)
-{
- _local_bh_enable_ip(_RET_IP_);
-}
-EXPORT_SYMBOL(local_bh_enable);
-
-void local_bh_enable_ip(unsigned long ip)
-{
- _local_bh_enable_ip(ip);
-}
-EXPORT_SYMBOL(local_bh_enable_ip);
+EXPORT_SYMBOL(__local_bh_enable_ip);
/*
* We restart softirq processing for at most MAX_SOFTIRQ_RESTART times,
@@ -264,7 +241,7 @@ asmlinkage void __do_softirq(void)
pending = local_softirq_pending();
account_irq_enter_time(current);
- __local_bh_disable(_RET_IP_, SOFTIRQ_OFFSET);
+ __local_bh_disable_ip(_RET_IP_, SOFTIRQ_OFFSET);
in_hardirq = lockdep_softirq_start();
cpu = smp_processor_id();
next prev parent reply other threads:[~2014-01-12 18:44 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-19 9:00 acpi_pad mwait usage Peter Zijlstra
2013-11-19 9:08 ` Peter Zijlstra
2013-11-19 11:31 ` [PATCH] x86, acpi, idle: Restructure the mwait idle routines Peter Zijlstra
2013-11-19 13:06 ` Rafael J. Wysocki
2013-11-19 13:21 ` Mike Galbraith
2013-11-19 14:22 ` Arjan van de Ven
2013-11-19 14:46 ` Peter Zijlstra
2013-11-19 14:51 ` Peter Zijlstra
2013-11-19 15:13 ` Peter Zijlstra
2013-11-19 21:06 ` Jacob Pan
2013-11-20 10:28 ` Peter Zijlstra
2013-11-20 10:58 ` Peter Zijlstra
2013-11-20 16:24 ` Arjan van de Ven
2013-11-20 16:33 ` Peter Zijlstra
2013-11-20 16:38 ` Arjan van de Ven
2014-01-12 18:44 ` tip-bot for Peter Zijlstra [this message]
2014-01-12 18:44 ` [tip:sched/idle] sched, net: Clean up preempt_enable_no_resched() abuse tip-bot for Peter Zijlstra
2014-01-12 18:44 ` [tip:sched/idle] sched, net: Fixup busy_loop_us_clock() tip-bot for Peter Zijlstra
2014-01-13 15:56 ` [tip:sched/core] locking: Optimize lock_bh functions tip-bot for Peter Zijlstra
2014-01-13 16:42 ` [tip:sched/core] sched/preempt, locking: Rework local_bh_{dis, en}able() tip-bot for Peter Zijlstra
2014-01-13 16:45 ` [tip:sched/core] sched, net: Clean up preempt_enable_no_resched() abuse tip-bot for Peter Zijlstra
2014-01-13 16:45 ` [tip:sched/core] sched, net: Fixup busy_loop_us_clock() tip-bot for Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-c795eb55e74041a4b1e46a82bb07d8bd513fb066@git.kernel.org \
--to=tipbot@zytor.com \
--cc=arjan@linux.intel.com \
--cc=bitbucket@online.de \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox