From: tip-bot for Peter Zijlstra <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@kernel.org,
torvalds@linux-foundation.org, peterz@infradead.org,
nicolas.pitre@linaro.org, tglx@linutronix.de,
daniel.lezcano@linaro.org
Subject: [tip:sched/core] sched/idle: Reflow cpuidle_idle_call()
Date: Thu, 8 May 2014 03:47:40 -0700 [thread overview]
Message-ID: <tip-cc6vb0snt3sr7op6rlbfeqfh@git.kernel.org> (raw)
Commit-ID: 37352273ad48f2d177ed1b06ced32d5536b773fb
Gitweb: http://git.kernel.org/tip/37352273ad48f2d177ed1b06ced32d5536b773fb
Author: Peter Zijlstra <peterz@infradead.org>
AuthorDate: Fri, 11 Apr 2014 13:55:48 +0200
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Thu, 8 May 2014 09:16:59 +0200
sched/idle: Reflow cpuidle_idle_call()
Apply goto to reduce lines and nesting levels.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-cc6vb0snt3sr7op6rlbfeqfh@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
kernel/sched/idle.c | 131 +++++++++++++++++++++++-----------------------------
1 file changed, 58 insertions(+), 73 deletions(-)
diff --git a/kernel/sched/idle.c b/kernel/sched/idle.c
index ed67f0c..88a6bc4 100644
--- a/kernel/sched/idle.c
+++ b/kernel/sched/idle.c
@@ -73,7 +73,7 @@ static int cpuidle_idle_call(void)
{
struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
- int next_state, entered_state, ret;
+ int next_state, entered_state;
bool broadcast;
/*
@@ -102,90 +102,75 @@ static int cpuidle_idle_call(void)
* Check if the cpuidle framework is ready, otherwise fallback
* to the default arch specific idle method
*/
- ret = cpuidle_enabled(drv, dev);
-
- if (!ret) {
- /*
- * Ask the governor to choose an idle state it thinks
- * it is convenient to go to. There is *always* a
- * convenient idle state
- */
- next_state = cpuidle_select(drv, dev);
-
+ if (cpuidle_enabled(drv, dev)) {
+use_default:
/*
- * The idle task must be scheduled, it is pointless to
- * go to idle, just update no idle residency and get
- * out of this function
+ * We can't use the cpuidle framework, let's use the default
+ * idle routine.
*/
- if (current_clr_polling_and_test()) {
- dev->last_residency = 0;
- entered_state = next_state;
+ if (current_clr_polling_and_test())
local_irq_enable();
- } else {
- broadcast = !!(drv->states[next_state].flags &
- CPUIDLE_FLAG_TIMER_STOP);
-
- if (broadcast) {
- /*
- * Tell the time framework to switch
- * to a broadcast timer because our
- * local timer will be shutdown. If a
- * local timer is used from another
- * cpu as a broadcast timer, this call
- * may fail if it is not available
- */
- ret = clockevents_notify(
- CLOCK_EVT_NOTIFY_BROADCAST_ENTER,
- &dev->cpu);
- }
-
- if (!ret) {
- trace_cpu_idle_rcuidle(next_state, dev->cpu);
-
- /*
- * Enter the idle state previously
- * returned by the governor
- * decision. This function will block
- * until an interrupt occurs and will
- * take care of re-enabling the local
- * interrupts
- */
- entered_state = cpuidle_enter(drv, dev,
- next_state);
-
- trace_cpu_idle_rcuidle(PWR_EVENT_EXIT,
- dev->cpu);
-
- if (broadcast)
- clockevents_notify(
- CLOCK_EVT_NOTIFY_BROADCAST_EXIT,
- &dev->cpu);
-
- /*
- * Give the governor an opportunity to reflect on the
- * outcome
- */
- cpuidle_reflect(dev, entered_state);
- }
- }
+ else
+ arch_cpu_idle();
+
+ goto exit_idle;
}
/*
- * We can't use the cpuidle framework, let's use the default
- * idle routine
+ * Ask the governor to choose an idle state it thinks
+ * it is convenient to go to. There is *always* a
+ * convenient idle state
*/
- if (ret) {
- if (!current_clr_polling_and_test())
- arch_cpu_idle();
- else
- local_irq_enable();
+ next_state = cpuidle_select(drv, dev);
+
+ /*
+ * The idle task must be scheduled, it is pointless to
+ * go to idle, just update no idle residency and get
+ * out of this function
+ */
+ if (current_clr_polling_and_test()) {
+ dev->last_residency = 0;
+ entered_state = next_state;
+ local_irq_enable();
+ goto exit_idle;
}
+ broadcast = !!(drv->states[next_state].flags & CPUIDLE_FLAG_TIMER_STOP);
+
+ /*
+ * Tell the time framework to switch to a broadcast timer
+ * because our local timer will be shutdown. If a local timer
+ * is used from another cpu as a broadcast timer, this call may
+ * fail if it is not available
+ */
+ if (broadcast &&
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu))
+ goto use_default;
+
+ trace_cpu_idle_rcuidle(next_state, dev->cpu);
+
+ /*
+ * Enter the idle state previously returned by the governor decision.
+ * This function will block until an interrupt occurs and will take
+ * care of re-enabling the local interrupts
+ */
+ entered_state = cpuidle_enter(drv, dev, next_state);
+
+ trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, dev->cpu);
+
+ if (broadcast)
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu);
+
+ /*
+ * Give the governor an opportunity to reflect on the outcome
+ */
+ cpuidle_reflect(dev, entered_state);
+
+exit_idle:
__current_set_polling();
/*
- * It is up to the idle functions to enable back the local
- * interrupt
+ * It is up to the idle functions to reenable local interrupts
*/
if (WARN_ON_ONCE(irqs_disabled()))
local_irq_enable();
next reply other threads:[~2014-05-08 10:48 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-08 10:47 tip-bot for Peter Zijlstra [this message]
2014-05-08 11:39 ` [tip:sched/core] sched/idle: Reflow cpuidle_idle_call() Rafael J. Wysocki
2014-05-08 11:41 ` Rafael J. Wysocki
2014-05-08 12:03 ` Peter Zijlstra
2014-05-08 11:56 ` Rafael J. Wysocki
2014-05-08 12:08 ` Peter Zijlstra
2014-05-08 16:33 ` Ingo Molnar
2014-05-08 16:49 ` Peter Zijlstra
2014-05-22 8:41 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-cc6vb0snt3sr7op6rlbfeqfh@git.kernel.org \
--to=tipbot@zytor.com \
--cc=daniel.lezcano@linaro.org \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=nicolas.pitre@linaro.org \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox