[PATCH v5 00/12] x86/microcode: Early load microcode

[PATCH v5 00/12] x86/microcode: Early load microcode

[Fenghua Yu]

From: Fenghua Yu <fenghua.yu@intel.com>

The problem in current microcode loading method is that we load a microcode way,
way too late; ideally we should load it before turning paging on.  This may only
be practical on 32 bits since we can't get to 64-bit mode without paging on,
but we should still do it as early as at all possible.

Similarly, we should load the microcode update as early as possible during AP
bringup and when processors are brought back online after hotplug or S3/S4.

In order to do that, the microcode patch needs to be permanently present in
kernel memory.  Each individual patch is fairly small, so that is OK, but the
entire blob with support for each CPU is too big. Since only CPU's with same
model can be in the same platform, we store microcode with the same model as
BSP. Later on APs can upload microcode from the saved microcodep patches.

Note, however, that Linux users have gotten used to being able to install a
microcode patch in the field without having a reboot; we support that model too.

In x86_64, this patchset needs early #PF handler set page table patchset. So
this patchset is based on:
git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git for-x86-boot

v5: Call 64 bit load_ucode_bsp() after copy_bootdata() and remove its
parameter.

v4: Change CPUID_IS macro. Call load_ucode_bsp after load_idt in x86_64. Flush
tlb after applying microcode.

v3: Change .hex to .bin in 01/10 and 05/10 patches. Fix some compilation
warnings. In x86_32 mode, access global varialbes by __pa_symobl() and fix
static string issue in x86_vendor(). Call load_ucode_ap() in real mode as well.
Add debug info.

v2: Detect vendor before loading microcode. Move some functions from
microcode_intel_early.c to microcode_intel_lib.c. Change some early loading
microcode dependencies in Kconfig. Reword doc.

Fenghua Yu (12):
  Documentation/x86: Early load microcode
  x86/microcode_intel.h: Define functions and macros for early loading
    ucode
  x86/common.c: Make have_cpuid_p() a global function
  x86/common.c: load ucode in 64 bit or show loading ucode info in 32
    bit on AP
  x86/microcode_core_early.c: Define interfaces for early loading ucode
  x86/microcode_intel_lib.c: Early update ucode on Intel's CPU
  x86/tlbflush.h: Define __native_flush_tlb_global_irq_disabled()
  x86/microcode_intel_early.c: Early update ucode on Intel's CPU
  x86/head_32.S: Early update ucode in 32-bit
  x86/head64.c: Early update ucode in 64-bit
  x86/mm/init.c: Copy ucode from initrd image to kernel memory
  x86/Kconfig: Configurations to enable/disable the feature

 Documentation/x86/early-microcode.txt   |  43 ++
 arch/x86/Kconfig                        |  18 +
 arch/x86/include/asm/microcode.h        |  14 +
 arch/x86/include/asm/microcode_intel.h  |  85 ++++
 arch/x86/include/asm/processor.h        |   8 +
 arch/x86/include/asm/tlbflush.h         |  18 +-
 arch/x86/kernel/Makefile                |   3 +
 arch/x86/kernel/cpu/common.c            |  17 +-
 arch/x86/kernel/head64.c                |   6 +
 arch/x86/kernel/head_32.S               |  11 +
 arch/x86/kernel/microcode_core.c        |   7 +-
 arch/x86/kernel/microcode_core_early.c  |  76 +++
 arch/x86/kernel/microcode_intel.c       | 198 ++------
 arch/x86/kernel/microcode_intel_early.c | 796 ++++++++++++++++++++++++++++++++
 arch/x86/kernel/microcode_intel_lib.c   | 174 +++++++
 arch/x86/mm/init.c                      |  10 +
 16 files changed, 1301 insertions(+), 183 deletions(-)
 create mode 100644 Documentation/x86/early-microcode.txt
 create mode 100644 arch/x86/include/asm/microcode_intel.h
 create mode 100644 arch/x86/kernel/microcode_core_early.c
 create mode 100644 arch/x86/kernel/microcode_intel_early.c
 create mode 100644 arch/x86/kernel/microcode_intel_lib.c

-- 
1.8.0.1

[PATCH v5 01/12] Documentation/x86: Early load microcode

[Fenghua Yu]

From: Fenghua Yu <fenghua.yu@intel.com>

Documenation for early loading microcode methodology.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
 Documentation/x86/early-microcode.txt | 43 +++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100644 Documentation/x86/early-microcode.txt

diff --git a/Documentation/x86/early-microcode.txt b/Documentation/x86/early-microcode.txt
new file mode 100644
index 0000000..4aaf0df
--- /dev/null
+++ b/Documentation/x86/early-microcode.txt
@@ -0,0 +1,43 @@
+Early load microcode
+====================
+By Fenghua Yu <fenghua.yu@intel.com>
+
+Kernel can update microcode in early phase of boot time. Loading microcode early
+can fix CPU issues before they are observed during kernel boot time.
+
+Microcode is stored in an initrd file. The microcode is read from the initrd
+file and loaded to CPUs during boot time.
+
+The format of the combined initrd image is microcode in cpio format followed by
+the initrd image (maybe compressed). Kernel parses the combined initrd image
+during boot time. The microcode file in cpio name space is:
+kernel/x86/microcode/GenuineIntel.bin
+
+During BSP boot (before SMP starts), if the kernel finds the microcode file in
+the initrd file, it parses the microcode and saves matching microcode in memory.
+If matching microcode is found, it will be uploaded in BSP and later on in all
+APs.
+
+The cached microcode patch is applied when CPUs resume from a sleep state.
+
+There are two legacy user space interfaces to load microcode, either through
+/dev/cpu/microcode or through /sys/devices/system/cpu/microcode/reload file
+in sysfs.
+
+In addition to these two legacy methods, the early loading method described
+here is the third method with which microcode can be uploaded to a system's
+CPUs.
+
+The following example script shows how to generate a new combined initrd file in
+/boot/initrd-3.5.0.ucode.img with original microcode microcode.bin and
+original initrd image /boot/initrd-3.5.0.img.
+
+mkdir initrd
+cd initrd
+mkdir kernel
+mkdir kernel/x86
+mkdir kernel/x86/microcode
+cp ../microcode.bin kernel/x86/microcode/GenuineIntel.bin
+find .|cpio -oc >../ucode.cpio
+cd ..
+cat ucode.cpio /boot/initrd-3.5.0.img >/boot/initrd-3.5.0.ucode.img
-- 
1.8.0.1

[tip:x86/microcode] x86, doc: Documentation for early microcode loading

[tip-bot for Fenghua Yu]

Commit-ID:  0d91ea86a895b911fd7d999acb3f600706d9c8cd
Gitweb:     http://git.kernel.org/tip/0d91ea86a895b911fd7d999acb3f600706d9c8cd
Author:     Fenghua Yu <fenghua.yu@intel.com>
AuthorDate: Thu, 20 Dec 2012 23:44:21 -0800
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 31 Jan 2013 13:18:47 -0800

x86, doc: Documentation for early microcode loading

Documenation for early loading microcode methodology.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1356075872-3054-2-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 Documentation/x86/early-microcode.txt | 43 +++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/Documentation/x86/early-microcode.txt b/Documentation/x86/early-microcode.txt
new file mode 100644
index 0000000..4aaf0df
--- /dev/null
+++ b/Documentation/x86/early-microcode.txt
@@ -0,0 +1,43 @@
+Early load microcode
+====================
+By Fenghua Yu <fenghua.yu@intel.com>
+
+Kernel can update microcode in early phase of boot time. Loading microcode early
+can fix CPU issues before they are observed during kernel boot time.
+
+Microcode is stored in an initrd file. The microcode is read from the initrd
+file and loaded to CPUs during boot time.
+
+The format of the combined initrd image is microcode in cpio format followed by
+the initrd image (maybe compressed). Kernel parses the combined initrd image
+during boot time. The microcode file in cpio name space is:
+kernel/x86/microcode/GenuineIntel.bin
+
+During BSP boot (before SMP starts), if the kernel finds the microcode file in
+the initrd file, it parses the microcode and saves matching microcode in memory.
+If matching microcode is found, it will be uploaded in BSP and later on in all
+APs.
+
+The cached microcode patch is applied when CPUs resume from a sleep state.
+
+There are two legacy user space interfaces to load microcode, either through
+/dev/cpu/microcode or through /sys/devices/system/cpu/microcode/reload file
+in sysfs.
+
+In addition to these two legacy methods, the early loading method described
+here is the third method with which microcode can be uploaded to a system's
+CPUs.
+
+The following example script shows how to generate a new combined initrd file in
+/boot/initrd-3.5.0.ucode.img with original microcode microcode.bin and
+original initrd image /boot/initrd-3.5.0.img.
+
+mkdir initrd
+cd initrd
+mkdir kernel
+mkdir kernel/x86
+mkdir kernel/x86/microcode
+cp ../microcode.bin kernel/x86/microcode/GenuineIntel.bin
+find .|cpio -oc >../ucode.cpio
+cd ..
+cat ucode.cpio /boot/initrd-3.5.0.img >/boot/initrd-3.5.0.ucode.img

[PATCH v5 02/12] x86/microcode_intel.h: Define functions and macros for early loading ucode

[Fenghua Yu]

From: Fenghua Yu <fenghua.yu@intel.com>

Define some functions and macros that will be used in early loading ucode. Some
of them are moved from microcode_intel.c driver in order to be called in early
boot phase before module can be called.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/x86/include/asm/microcode_intel.h |  85 ++++++++++++++
 arch/x86/kernel/Makefile               |   3 +
 arch/x86/kernel/microcode_core.c       |   7 +-
 arch/x86/kernel/microcode_intel.c      | 198 +++++----------------------------
 4 files changed, 122 insertions(+), 171 deletions(-)
 create mode 100644 arch/x86/include/asm/microcode_intel.h

diff --git a/arch/x86/include/asm/microcode_intel.h b/arch/x86/include/asm/microcode_intel.h
new file mode 100644
index 0000000..5356f92
--- /dev/null
+++ b/arch/x86/include/asm/microcode_intel.h
@@ -0,0 +1,85 @@
+#ifndef _ASM_X86_MICROCODE_INTEL_H
+#define _ASM_X86_MICROCODE_INTEL_H
+
+#include <asm/microcode.h>
+
+struct microcode_header_intel {
+	unsigned int            hdrver;
+	unsigned int            rev;
+	unsigned int            date;
+	unsigned int            sig;
+	unsigned int            cksum;
+	unsigned int            ldrver;
+	unsigned int            pf;
+	unsigned int            datasize;
+	unsigned int            totalsize;
+	unsigned int            reserved[3];
+};
+
+struct microcode_intel {
+	struct microcode_header_intel hdr;
+	unsigned int            bits[0];
+};
+
+/* microcode format is extended from prescott processors */
+struct extended_signature {
+	unsigned int            sig;
+	unsigned int            pf;
+	unsigned int            cksum;
+};
+
+struct extended_sigtable {
+	unsigned int            count;
+	unsigned int            cksum;
+	unsigned int            reserved[3];
+	struct extended_signature sigs[0];
+};
+
+#define DEFAULT_UCODE_DATASIZE	(2000)
+#define MC_HEADER_SIZE		(sizeof(struct microcode_header_intel))
+#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE)
+#define EXT_HEADER_SIZE		(sizeof(struct extended_sigtable))
+#define EXT_SIGNATURE_SIZE	(sizeof(struct extended_signature))
+#define DWSIZE			(sizeof(u32))
+
+#define get_totalsize(mc) \
+	(((struct microcode_intel *)mc)->hdr.totalsize ? \
+	 ((struct microcode_intel *)mc)->hdr.totalsize : \
+	 DEFAULT_UCODE_TOTALSIZE)
+
+#define get_datasize(mc) \
+	(((struct microcode_intel *)mc)->hdr.datasize ? \
+	 ((struct microcode_intel *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE)
+
+#define sigmatch(s1, s2, p1, p2) \
+	(((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0))))
+
+#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)
+
+extern int
+get_matching_microcode(unsigned int csig, int cpf, void *mc, int rev);
+extern int microcode_sanity_check(void *mc, int print_err);
+extern int get_matching_sig(unsigned int csig, int cpf, void *mc, int rev);
+extern int
+update_match_revision(struct microcode_header_intel *mc_header, int rev);
+
+#ifdef CONFIG_MICROCODE_INTEL_EARLY
+extern void __init load_ucode_intel_bsp(void);
+extern void __cpuinit load_ucode_intel_ap(void);
+extern void show_ucode_info_early(void);
+#else
+static inline __init void load_ucode_intel_bsp(void) {}
+static inline __cpuinit void load_ucode_intel_ap(void) {}
+static inline void show_ucode_info_early(void) {}
+#endif
+
+#if defined(CONFIG_MICROCODE_INTEL_EARLY) && defined(CONFIG_HOTPLUG_CPU)
+extern int save_mc_for_early(u8 *mc);
+#else
+static inline int save_mc_for_early(u8 *mc)
+{
+	return 0;
+}
+#endif
+
+#endif /* _ASM_X86_MICROCODE_INTEL_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 34e923a..052abee 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -88,6 +88,9 @@ obj-$(CONFIG_PARAVIRT_CLOCK)	+= pvclock.o
 
 obj-$(CONFIG_PCSPKR_PLATFORM)	+= pcspeaker.o
 
+obj-$(CONFIG_MICROCODE_EARLY)		+= microcode_core_early.o
+obj-$(CONFIG_MICROCODE_INTEL_EARLY)	+= microcode_intel_early.o
+obj-$(CONFIG_MICROCODE_INTEL_LIB)	+= microcode_intel_lib.o
 microcode-y				:= microcode_core.o
 microcode-$(CONFIG_MICROCODE_INTEL)	+= microcode_intel.o
 microcode-$(CONFIG_MICROCODE_AMD)	+= microcode_amd.o
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index 3a04b22..22db92b 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -364,10 +364,7 @@ static struct attribute_group mc_attr_group = {
 
 static void microcode_fini_cpu(int cpu)
 {
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-
 	microcode_ops->microcode_fini_cpu(cpu);
-	uci->valid = 0;
 }
 
 static enum ucode_state microcode_resume_cpu(int cpu)
@@ -383,6 +380,10 @@ static enum ucode_state microcode_resume_cpu(int cpu)
 static enum ucode_state microcode_init_cpu(int cpu, bool refresh_fw)
 {
 	enum ucode_state ustate;
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+	if (uci && uci->valid)
+		return UCODE_OK;
 
 	if (collect_cpu_info(cpu))
 		return UCODE_ERROR;
diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
index 3544aed..5fb2ceb 100644
--- a/arch/x86/kernel/microcode_intel.c
+++ b/arch/x86/kernel/microcode_intel.c
@@ -79,7 +79,7 @@
 #include <linux/module.h>
 #include <linux/vmalloc.h>
 
-#include <asm/microcode.h>
+#include <asm/microcode_intel.h>
 #include <asm/processor.h>
 #include <asm/msr.h>
 
@@ -87,59 +87,6 @@ MODULE_DESCRIPTION("Microcode Update Driver");
 MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
 MODULE_LICENSE("GPL");
 
-struct microcode_header_intel {
-	unsigned int            hdrver;
-	unsigned int            rev;
-	unsigned int            date;
-	unsigned int            sig;
-	unsigned int            cksum;
-	unsigned int            ldrver;
-	unsigned int            pf;
-	unsigned int            datasize;
-	unsigned int            totalsize;
-	unsigned int            reserved[3];
-};
-
-struct microcode_intel {
-	struct microcode_header_intel hdr;
-	unsigned int            bits[0];
-};
-
-/* microcode format is extended from prescott processors */
-struct extended_signature {
-	unsigned int            sig;
-	unsigned int            pf;
-	unsigned int            cksum;
-};
-
-struct extended_sigtable {
-	unsigned int            count;
-	unsigned int            cksum;
-	unsigned int            reserved[3];
-	struct extended_signature sigs[0];
-};
-
-#define DEFAULT_UCODE_DATASIZE	(2000)
-#define MC_HEADER_SIZE		(sizeof(struct microcode_header_intel))
-#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE)
-#define EXT_HEADER_SIZE		(sizeof(struct extended_sigtable))
-#define EXT_SIGNATURE_SIZE	(sizeof(struct extended_signature))
-#define DWSIZE			(sizeof(u32))
-
-#define get_totalsize(mc) \
-	(((struct microcode_intel *)mc)->hdr.totalsize ? \
-	 ((struct microcode_intel *)mc)->hdr.totalsize : \
-	 DEFAULT_UCODE_TOTALSIZE)
-
-#define get_datasize(mc) \
-	(((struct microcode_intel *)mc)->hdr.datasize ? \
-	 ((struct microcode_intel *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE)
-
-#define sigmatch(s1, s2, p1, p2) \
-	(((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0))))
-
-#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)
-
 static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
 {
 	struct cpuinfo_x86 *c = &cpu_data(cpu_num);
@@ -162,128 +109,25 @@ static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
 	return 0;
 }
 
-static inline int update_match_cpu(struct cpu_signature *csig, int sig, int pf)
-{
-	return (!sigmatch(sig, csig->sig, pf, csig->pf)) ? 0 : 1;
-}
-
-static inline int
-update_match_revision(struct microcode_header_intel *mc_header, int rev)
-{
-	return (mc_header->rev <= rev) ? 0 : 1;
-}
-
-static int microcode_sanity_check(void *mc)
-{
-	unsigned long total_size, data_size, ext_table_size;
-	struct microcode_header_intel *mc_header = mc;
-	struct extended_sigtable *ext_header = NULL;
-	int sum, orig_sum, ext_sigcount = 0, i;
-	struct extended_signature *ext_sig;
-
-	total_size = get_totalsize(mc_header);
-	data_size = get_datasize(mc_header);
-
-	if (data_size + MC_HEADER_SIZE > total_size) {
-		pr_err("error! Bad data size in microcode data file\n");
-		return -EINVAL;
-	}
-
-	if (mc_header->ldrver != 1 || mc_header->hdrver != 1) {
-		pr_err("error! Unknown microcode update format\n");
-		return -EINVAL;
-	}
-	ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
-	if (ext_table_size) {
-		if ((ext_table_size < EXT_HEADER_SIZE)
-		 || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
-			pr_err("error! Small exttable size in microcode data file\n");
-			return -EINVAL;
-		}
-		ext_header = mc + MC_HEADER_SIZE + data_size;
-		if (ext_table_size != exttable_size(ext_header)) {
-			pr_err("error! Bad exttable size in microcode data file\n");
-			return -EFAULT;
-		}
-		ext_sigcount = ext_header->count;
-	}
-
-	/* check extended table checksum */
-	if (ext_table_size) {
-		int ext_table_sum = 0;
-		int *ext_tablep = (int *)ext_header;
-
-		i = ext_table_size / DWSIZE;
-		while (i--)
-			ext_table_sum += ext_tablep[i];
-		if (ext_table_sum) {
-			pr_warning("aborting, bad extended signature table checksum\n");
-			return -EINVAL;
-		}
-	}
-
-	/* calculate the checksum */
-	orig_sum = 0;
-	i = (MC_HEADER_SIZE + data_size) / DWSIZE;
-	while (i--)
-		orig_sum += ((int *)mc)[i];
-	if (orig_sum) {
-		pr_err("aborting, bad checksum\n");
-		return -EINVAL;
-	}
-	if (!ext_table_size)
-		return 0;
-	/* check extended signature checksum */
-	for (i = 0; i < ext_sigcount; i++) {
-		ext_sig = (void *)ext_header + EXT_HEADER_SIZE +
-			  EXT_SIGNATURE_SIZE * i;
-		sum = orig_sum
-			- (mc_header->sig + mc_header->pf + mc_header->cksum)
-			+ (ext_sig->sig + ext_sig->pf + ext_sig->cksum);
-		if (sum) {
-			pr_err("aborting, bad checksum\n");
-			return -EINVAL;
-		}
-	}
-	return 0;
-}
-
 /*
  * return 0 - no update found
  * return 1 - found update
  */
-static int
-get_matching_microcode(struct cpu_signature *cpu_sig, void *mc, int rev)
+static int get_matching_mc(struct microcode_intel *mc_intel, int cpu)
 {
-	struct microcode_header_intel *mc_header = mc;
-	struct extended_sigtable *ext_header;
-	unsigned long total_size = get_totalsize(mc_header);
-	int ext_sigcount, i;
-	struct extended_signature *ext_sig;
-
-	if (!update_match_revision(mc_header, rev))
-		return 0;
-
-	if (update_match_cpu(cpu_sig, mc_header->sig, mc_header->pf))
-		return 1;
+	struct cpu_signature cpu_sig;
+	unsigned int csig, cpf, crev;
 
-	/* Look for ext. headers: */
-	if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE)
-		return 0;
+	collect_cpu_info(cpu, &cpu_sig);
 
-	ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE;
-	ext_sigcount = ext_header->count;
-	ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
+	csig = cpu_sig.sig;
+	cpf = cpu_sig.pf;
+	crev = cpu_sig.rev;
 
-	for (i = 0; i < ext_sigcount; i++) {
-		if (update_match_cpu(cpu_sig, ext_sig->sig, ext_sig->pf))
-			return 1;
-		ext_sig++;
-	}
-	return 0;
+	return get_matching_microcode(csig, cpf, mc_intel, crev);
 }
 
-static int apply_microcode(int cpu)
+int apply_microcode(int cpu)
 {
 	struct microcode_intel *mc_intel;
 	struct ucode_cpu_info *uci;
@@ -300,6 +144,14 @@ static int apply_microcode(int cpu)
 	if (mc_intel == NULL)
 		return 0;
 
+	/*
+	 * Microcode on this CPU could be updated earlier. Only apply the
+	 * microcode patch in mc_intel when it is newer than the one on this
+	 * CPU.
+	 */
+	if (get_matching_mc(mc_intel, cpu) == 0)
+		return 0;
+
 	/* write microcode via MSR 0x79 */
 	wrmsr(MSR_IA32_UCODE_WRITE,
 	      (unsigned long) mc_intel->bits,
@@ -338,6 +190,7 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
 	unsigned int leftover = size;
 	enum ucode_state state = UCODE_OK;
 	unsigned int curr_mc_size = 0;
+	unsigned int csig, cpf;
 
 	while (leftover) {
 		struct microcode_header_intel mc_header;
@@ -362,11 +215,13 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
 		}
 
 		if (get_ucode_data(mc, ucode_ptr, mc_size) ||
-		    microcode_sanity_check(mc) < 0) {
+		    microcode_sanity_check(mc, 1) < 0) {
 			break;
 		}
 
-		if (get_matching_microcode(&uci->cpu_sig, mc, new_rev)) {
+		csig = uci->cpu_sig.sig;
+		cpf = uci->cpu_sig.pf;
+		if (get_matching_microcode(csig, cpf, mc, new_rev)) {
 			vfree(new_mc);
 			new_rev = mc_header.rev;
 			new_mc  = mc;
@@ -393,6 +248,13 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
 	vfree(uci->mc);
 	uci->mc = (struct microcode_intel *)new_mc;
 
+	/*
+	 * If early loading microcode is supported, save this mc into
+	 * permanent memory. So it will be loaded early when a CPU is hot added
+	 * or resumes.
+	 */
+	save_mc_for_early(new_mc);
+
 	pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n",
 		 cpu, new_rev, uci->cpu_sig.rev);
 out:
-- 
1.8.0.1

[tip:x86/microcode] x86/microcode_intel.h: Define functions and macros for early loading ucode

[tip-bot for Fenghua Yu]

Commit-ID:  9cd4d78e21cfdc709b1af516214ec4f69ee0e6bd
Gitweb:     http://git.kernel.org/tip/9cd4d78e21cfdc709b1af516214ec4f69ee0e6bd
Author:     Fenghua Yu <fenghua.yu@intel.com>
AuthorDate: Thu, 20 Dec 2012 23:44:22 -0800
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 31 Jan 2013 13:18:50 -0800

x86/microcode_intel.h: Define functions and macros for early loading ucode

Define some functions and macros that will be used in early loading ucode. Some
of them are moved from microcode_intel.c driver in order to be called in early
boot phase before module can be called.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1356075872-3054-3-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/microcode_intel.h |  85 ++++++++++++++
 arch/x86/kernel/Makefile               |   3 +
 arch/x86/kernel/microcode_core.c       |   7 +-
 arch/x86/kernel/microcode_intel.c      | 198 +++++----------------------------
 4 files changed, 122 insertions(+), 171 deletions(-)

diff --git a/arch/x86/include/asm/microcode_intel.h b/arch/x86/include/asm/microcode_intel.h
new file mode 100644
index 0000000..5356f92
--- /dev/null
+++ b/arch/x86/include/asm/microcode_intel.h
@@ -0,0 +1,85 @@
+#ifndef _ASM_X86_MICROCODE_INTEL_H
+#define _ASM_X86_MICROCODE_INTEL_H
+
+#include <asm/microcode.h>
+
+struct microcode_header_intel {
+	unsigned int            hdrver;
+	unsigned int            rev;
+	unsigned int            date;
+	unsigned int            sig;
+	unsigned int            cksum;
+	unsigned int            ldrver;
+	unsigned int            pf;
+	unsigned int            datasize;
+	unsigned int            totalsize;
+	unsigned int            reserved[3];
+};
+
+struct microcode_intel {
+	struct microcode_header_intel hdr;
+	unsigned int            bits[0];
+};
+
+/* microcode format is extended from prescott processors */
+struct extended_signature {
+	unsigned int            sig;
+	unsigned int            pf;
+	unsigned int            cksum;
+};
+
+struct extended_sigtable {
+	unsigned int            count;
+	unsigned int            cksum;
+	unsigned int            reserved[3];
+	struct extended_signature sigs[0];
+};
+
+#define DEFAULT_UCODE_DATASIZE	(2000)
+#define MC_HEADER_SIZE		(sizeof(struct microcode_header_intel))
+#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE)
+#define EXT_HEADER_SIZE		(sizeof(struct extended_sigtable))
+#define EXT_SIGNATURE_SIZE	(sizeof(struct extended_signature))
+#define DWSIZE			(sizeof(u32))
+
+#define get_totalsize(mc) \
+	(((struct microcode_intel *)mc)->hdr.totalsize ? \
+	 ((struct microcode_intel *)mc)->hdr.totalsize : \
+	 DEFAULT_UCODE_TOTALSIZE)
+
+#define get_datasize(mc) \
+	(((struct microcode_intel *)mc)->hdr.datasize ? \
+	 ((struct microcode_intel *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE)
+
+#define sigmatch(s1, s2, p1, p2) \
+	(((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0))))
+
+#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)
+
+extern int
+get_matching_microcode(unsigned int csig, int cpf, void *mc, int rev);
+extern int microcode_sanity_check(void *mc, int print_err);
+extern int get_matching_sig(unsigned int csig, int cpf, void *mc, int rev);
+extern int
+update_match_revision(struct microcode_header_intel *mc_header, int rev);
+
+#ifdef CONFIG_MICROCODE_INTEL_EARLY
+extern void __init load_ucode_intel_bsp(void);
+extern void __cpuinit load_ucode_intel_ap(void);
+extern void show_ucode_info_early(void);
+#else
+static inline __init void load_ucode_intel_bsp(void) {}
+static inline __cpuinit void load_ucode_intel_ap(void) {}
+static inline void show_ucode_info_early(void) {}
+#endif
+
+#if defined(CONFIG_MICROCODE_INTEL_EARLY) && defined(CONFIG_HOTPLUG_CPU)
+extern int save_mc_for_early(u8 *mc);
+#else
+static inline int save_mc_for_early(u8 *mc)
+{
+	return 0;
+}
+#endif
+
+#endif /* _ASM_X86_MICROCODE_INTEL_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 34e923a..052abee 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -88,6 +88,9 @@ obj-$(CONFIG_PARAVIRT_CLOCK)	+= pvclock.o
 
 obj-$(CONFIG_PCSPKR_PLATFORM)	+= pcspeaker.o
 
+obj-$(CONFIG_MICROCODE_EARLY)		+= microcode_core_early.o
+obj-$(CONFIG_MICROCODE_INTEL_EARLY)	+= microcode_intel_early.o
+obj-$(CONFIG_MICROCODE_INTEL_LIB)	+= microcode_intel_lib.o
 microcode-y				:= microcode_core.o
 microcode-$(CONFIG_MICROCODE_INTEL)	+= microcode_intel.o
 microcode-$(CONFIG_MICROCODE_AMD)	+= microcode_amd.o
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index 3a04b22..22db92b 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -364,10 +364,7 @@ static struct attribute_group mc_attr_group = {
 
 static void microcode_fini_cpu(int cpu)
 {
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-
 	microcode_ops->microcode_fini_cpu(cpu);
-	uci->valid = 0;
 }
 
 static enum ucode_state microcode_resume_cpu(int cpu)
@@ -383,6 +380,10 @@ static enum ucode_state microcode_resume_cpu(int cpu)
 static enum ucode_state microcode_init_cpu(int cpu, bool refresh_fw)
 {
 	enum ucode_state ustate;
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+	if (uci && uci->valid)
+		return UCODE_OK;
 
 	if (collect_cpu_info(cpu))
 		return UCODE_ERROR;
diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
index 3544aed..5fb2ceb 100644
--- a/arch/x86/kernel/microcode_intel.c
+++ b/arch/x86/kernel/microcode_intel.c
@@ -79,7 +79,7 @@
 #include <linux/module.h>
 #include <linux/vmalloc.h>
 
-#include <asm/microcode.h>
+#include <asm/microcode_intel.h>
 #include <asm/processor.h>
 #include <asm/msr.h>
 
@@ -87,59 +87,6 @@ MODULE_DESCRIPTION("Microcode Update Driver");
 MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
 MODULE_LICENSE("GPL");
 
-struct microcode_header_intel {
-	unsigned int            hdrver;
-	unsigned int            rev;
-	unsigned int            date;
-	unsigned int            sig;
-	unsigned int            cksum;
-	unsigned int            ldrver;
-	unsigned int            pf;
-	unsigned int            datasize;
-	unsigned int            totalsize;
-	unsigned int            reserved[3];
-};
-
-struct microcode_intel {
-	struct microcode_header_intel hdr;
-	unsigned int            bits[0];
-};
-
-/* microcode format is extended from prescott processors */
-struct extended_signature {
-	unsigned int            sig;
-	unsigned int            pf;
-	unsigned int            cksum;
-};
-
-struct extended_sigtable {
-	unsigned int            count;
-	unsigned int            cksum;
-	unsigned int            reserved[3];
-	struct extended_signature sigs[0];
-};
-
-#define DEFAULT_UCODE_DATASIZE	(2000)
-#define MC_HEADER_SIZE		(sizeof(struct microcode_header_intel))
-#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE)
-#define EXT_HEADER_SIZE		(sizeof(struct extended_sigtable))
-#define EXT_SIGNATURE_SIZE	(sizeof(struct extended_signature))
-#define DWSIZE			(sizeof(u32))
-
-#define get_totalsize(mc) \
-	(((struct microcode_intel *)mc)->hdr.totalsize ? \
-	 ((struct microcode_intel *)mc)->hdr.totalsize : \
-	 DEFAULT_UCODE_TOTALSIZE)
-
-#define get_datasize(mc) \
-	(((struct microcode_intel *)mc)->hdr.datasize ? \
-	 ((struct microcode_intel *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE)
-
-#define sigmatch(s1, s2, p1, p2) \
-	(((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0))))
-
-#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)
-
 static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
 {
 	struct cpuinfo_x86 *c = &cpu_data(cpu_num);
@@ -162,128 +109,25 @@ static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
 	return 0;
 }
 
-static inline int update_match_cpu(struct cpu_signature *csig, int sig, int pf)
-{
-	return (!sigmatch(sig, csig->sig, pf, csig->pf)) ? 0 : 1;
-}
-
-static inline int
-update_match_revision(struct microcode_header_intel *mc_header, int rev)
-{
-	return (mc_header->rev <= rev) ? 0 : 1;
-}
-
-static int microcode_sanity_check(void *mc)
-{
-	unsigned long total_size, data_size, ext_table_size;
-	struct microcode_header_intel *mc_header = mc;
-	struct extended_sigtable *ext_header = NULL;
-	int sum, orig_sum, ext_sigcount = 0, i;
-	struct extended_signature *ext_sig;
-
-	total_size = get_totalsize(mc_header);
-	data_size = get_datasize(mc_header);
-
-	if (data_size + MC_HEADER_SIZE > total_size) {
-		pr_err("error! Bad data size in microcode data file\n");
-		return -EINVAL;
-	}
-
-	if (mc_header->ldrver != 1 || mc_header->hdrver != 1) {
-		pr_err("error! Unknown microcode update format\n");
-		return -EINVAL;
-	}
-	ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
-	if (ext_table_size) {
-		if ((ext_table_size < EXT_HEADER_SIZE)
-		 || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
-			pr_err("error! Small exttable size in microcode data file\n");
-			return -EINVAL;
-		}
-		ext_header = mc + MC_HEADER_SIZE + data_size;
-		if (ext_table_size != exttable_size(ext_header)) {
-			pr_err("error! Bad exttable size in microcode data file\n");
-			return -EFAULT;
-		}
-		ext_sigcount = ext_header->count;
-	}
-
-	/* check extended table checksum */
-	if (ext_table_size) {
-		int ext_table_sum = 0;
-		int *ext_tablep = (int *)ext_header;
-
-		i = ext_table_size / DWSIZE;
-		while (i--)
-			ext_table_sum += ext_tablep[i];
-		if (ext_table_sum) {
-			pr_warning("aborting, bad extended signature table checksum\n");
-			return -EINVAL;
-		}
-	}
-
-	/* calculate the checksum */
-	orig_sum = 0;
-	i = (MC_HEADER_SIZE + data_size) / DWSIZE;
-	while (i--)
-		orig_sum += ((int *)mc)[i];
-	if (orig_sum) {
-		pr_err("aborting, bad checksum\n");
-		return -EINVAL;
-	}
-	if (!ext_table_size)
-		return 0;
-	/* check extended signature checksum */
-	for (i = 0; i < ext_sigcount; i++) {
-		ext_sig = (void *)ext_header + EXT_HEADER_SIZE +
-			  EXT_SIGNATURE_SIZE * i;
-		sum = orig_sum
-			- (mc_header->sig + mc_header->pf + mc_header->cksum)
-			+ (ext_sig->sig + ext_sig->pf + ext_sig->cksum);
-		if (sum) {
-			pr_err("aborting, bad checksum\n");
-			return -EINVAL;
-		}
-	}
-	return 0;
-}
-
 /*
  * return 0 - no update found
  * return 1 - found update
  */
-static int
-get_matching_microcode(struct cpu_signature *cpu_sig, void *mc, int rev)
+static int get_matching_mc(struct microcode_intel *mc_intel, int cpu)
 {
-	struct microcode_header_intel *mc_header = mc;
-	struct extended_sigtable *ext_header;
-	unsigned long total_size = get_totalsize(mc_header);
-	int ext_sigcount, i;
-	struct extended_signature *ext_sig;
-
-	if (!update_match_revision(mc_header, rev))
-		return 0;
-
-	if (update_match_cpu(cpu_sig, mc_header->sig, mc_header->pf))
-		return 1;
+	struct cpu_signature cpu_sig;
+	unsigned int csig, cpf, crev;
 
-	/* Look for ext. headers: */
-	if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE)
-		return 0;
+	collect_cpu_info(cpu, &cpu_sig);
 
-	ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE;
-	ext_sigcount = ext_header->count;
-	ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
+	csig = cpu_sig.sig;
+	cpf = cpu_sig.pf;
+	crev = cpu_sig.rev;
 
-	for (i = 0; i < ext_sigcount; i++) {
-		if (update_match_cpu(cpu_sig, ext_sig->sig, ext_sig->pf))
-			return 1;
-		ext_sig++;
-	}
-	return 0;
+	return get_matching_microcode(csig, cpf, mc_intel, crev);
 }
 
-static int apply_microcode(int cpu)
+int apply_microcode(int cpu)
 {
 	struct microcode_intel *mc_intel;
 	struct ucode_cpu_info *uci;
@@ -300,6 +144,14 @@ static int apply_microcode(int cpu)
 	if (mc_intel == NULL)
 		return 0;
 
+	/*
+	 * Microcode on this CPU could be updated earlier. Only apply the
+	 * microcode patch in mc_intel when it is newer than the one on this
+	 * CPU.
+	 */
+	if (get_matching_mc(mc_intel, cpu) == 0)
+		return 0;
+
 	/* write microcode via MSR 0x79 */
 	wrmsr(MSR_IA32_UCODE_WRITE,
 	      (unsigned long) mc_intel->bits,
@@ -338,6 +190,7 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
 	unsigned int leftover = size;
 	enum ucode_state state = UCODE_OK;
 	unsigned int curr_mc_size = 0;
+	unsigned int csig, cpf;
 
 	while (leftover) {
 		struct microcode_header_intel mc_header;
@@ -362,11 +215,13 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
 		}
 
 		if (get_ucode_data(mc, ucode_ptr, mc_size) ||
-		    microcode_sanity_check(mc) < 0) {
+		    microcode_sanity_check(mc, 1) < 0) {
 			break;
 		}
 
-		if (get_matching_microcode(&uci->cpu_sig, mc, new_rev)) {
+		csig = uci->cpu_sig.sig;
+		cpf = uci->cpu_sig.pf;
+		if (get_matching_microcode(csig, cpf, mc, new_rev)) {
 			vfree(new_mc);
 			new_rev = mc_header.rev;
 			new_mc  = mc;
@@ -393,6 +248,13 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
 	vfree(uci->mc);
 	uci->mc = (struct microcode_intel *)new_mc;
 
+	/*
+	 * If early loading microcode is supported, save this mc into
+	 * permanent memory. So it will be loaded early when a CPU is hot added
+	 * or resumes.
+	 */
+	save_mc_for_early(new_mc);
+
 	pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n",
 		 cpu, new_rev, uci->cpu_sig.rev);
 out:

[PATCH v5 03/12] x86/common.c: Make have_cpuid_p() a global function

[Fenghua Yu]

From: Fenghua Yu <fenghua.yu@intel.com>

Remove static declaration in have_cpuid_p() to make it a global function. The
function will be called in early loading microcode.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/x86/include/asm/processor.h | 8 ++++++++
 arch/x86/kernel/cpu/common.c     | 9 +++------
 2 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 888184b..3d722fd 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -190,6 +190,14 @@ extern void init_amd_cacheinfo(struct cpuinfo_x86 *c);
 extern void detect_extended_topology(struct cpuinfo_x86 *c);
 extern void detect_ht(struct cpuinfo_x86 *c);
 
+#ifdef CONFIG_X86_32
+extern int have_cpuid_p(void);
+#else
+static inline int have_cpuid_p(void)
+{
+	return 1;
+}
+#endif
 static inline void native_cpuid(unsigned int *eax, unsigned int *ebx,
 				unsigned int *ecx, unsigned int *edx)
 {
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 9c3ab43..d7fd246 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -37,6 +37,8 @@
 #include <asm/mce.h>
 #include <asm/msr.h>
 #include <asm/pat.h>
+#include <asm/microcode.h>
+#include <asm/microcode_intel.h>
 
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/uv/uv.h>
@@ -213,7 +215,7 @@ static inline int flag_is_changeable_p(u32 flag)
 }
 
 /* Probe for the CPUID instruction */
-static int __cpuinit have_cpuid_p(void)
+int __cpuinit have_cpuid_p(void)
 {
 	return flag_is_changeable_p(X86_EFLAGS_ID);
 }
@@ -249,11 +251,6 @@ static inline int flag_is_changeable_p(u32 flag)
 {
 	return 1;
 }
-/* Probe for the CPUID instruction */
-static inline int have_cpuid_p(void)
-{
-	return 1;
-}
 static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
 {
 }
-- 
1.8.0.1

[tip:x86/microcode] x86/common.c: Make have_cpuid_p() a global function

[tip-bot for Fenghua Yu]

Commit-ID:  d288e1cf8e62f3e4034f1f021f047009c4ac0b3c
Gitweb:     http://git.kernel.org/tip/d288e1cf8e62f3e4034f1f021f047009c4ac0b3c
Author:     Fenghua Yu <fenghua.yu@intel.com>
AuthorDate: Thu, 20 Dec 2012 23:44:23 -0800
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 31 Jan 2013 13:18:58 -0800

x86/common.c: Make have_cpuid_p() a global function

Remove static declaration in have_cpuid_p() to make it a global function. The
function will be called in early loading microcode.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1356075872-3054-4-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/processor.h | 8 ++++++++
 arch/x86/kernel/cpu/common.c     | 9 +++------
 2 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index bdee8bd..3cdf4aa 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -190,6 +190,14 @@ extern void init_amd_cacheinfo(struct cpuinfo_x86 *c);
 extern void detect_extended_topology(struct cpuinfo_x86 *c);
 extern void detect_ht(struct cpuinfo_x86 *c);
 
+#ifdef CONFIG_X86_32
+extern int have_cpuid_p(void);
+#else
+static inline int have_cpuid_p(void)
+{
+	return 1;
+}
+#endif
 static inline void native_cpuid(unsigned int *eax, unsigned int *ebx,
 				unsigned int *ecx, unsigned int *edx)
 {
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 9c3ab43..d7fd246 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -37,6 +37,8 @@
 #include <asm/mce.h>
 #include <asm/msr.h>
 #include <asm/pat.h>
+#include <asm/microcode.h>
+#include <asm/microcode_intel.h>
 
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/uv/uv.h>
@@ -213,7 +215,7 @@ static inline int flag_is_changeable_p(u32 flag)
 }
 
 /* Probe for the CPUID instruction */
-static int __cpuinit have_cpuid_p(void)
+int __cpuinit have_cpuid_p(void)
 {
 	return flag_is_changeable_p(X86_EFLAGS_ID);
 }
@@ -249,11 +251,6 @@ static inline int flag_is_changeable_p(u32 flag)
 {
 	return 1;
 }
-/* Probe for the CPUID instruction */
-static inline int have_cpuid_p(void)
-{
-	return 1;
-}
 static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
 {
 }

[PATCH v5 04/12] x86/common.c: load ucode in 64 bit or show loading ucode info in 32 bit on AP

[Fenghua Yu]

From: Fenghua Yu <fenghua.yu@intel.com>

In 64 bit, load ucode on AP in cpu_init().

In 32 bit, show ucode loading info on AP in cpu_init(). Microcode has been
loaded earlier before paging. Now it is safe to show the loading microcode
info on this AP.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/x86/kernel/cpu/common.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index d7fd246..d814772 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1220,6 +1220,12 @@ void __cpuinit cpu_init(void)
 	int cpu;
 	int i;
 
+	/*
+	 * Load microcode on this cpu if a valid microcode is available.
+	 * This is early microcode loading procedure.
+	 */
+	load_ucode_ap();
+
 	cpu = stack_smp_processor_id();
 	t = &per_cpu(init_tss, cpu);
 	oist = &per_cpu(orig_ist, cpu);
@@ -1311,6 +1317,8 @@ void __cpuinit cpu_init(void)
 	struct tss_struct *t = &per_cpu(init_tss, cpu);
 	struct thread_struct *thread = &curr->thread;
 
+	show_ucode_info_early();
+
 	if (cpumask_test_and_set_cpu(cpu, cpu_initialized_mask)) {
 		printk(KERN_WARNING "CPU#%d already initialized!\n", cpu);
 		for (;;)
-- 
1.8.0.1

[tip:x86/microcode] x86/common.c: load ucode in 64 bit or show loading ucode info in 32 bit on AP

[tip-bot for Fenghua Yu]

Commit-ID:  e6ebf5deaaaa33b661f0db86380c232b162bd68c
Gitweb:     http://git.kernel.org/tip/e6ebf5deaaaa33b661f0db86380c232b162bd68c
Author:     Fenghua Yu <fenghua.yu@intel.com>
AuthorDate: Thu, 20 Dec 2012 23:44:24 -0800
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 31 Jan 2013 13:19:06 -0800

x86/common.c: load ucode in 64 bit or show loading ucode info in 32 bit on AP

In 64 bit, load ucode on AP in cpu_init().

In 32 bit, show ucode loading info on AP in cpu_init(). Microcode has been
loaded earlier before paging. Now it is safe to show the loading microcode
info on this AP.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1356075872-3054-5-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/cpu/common.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index d7fd246..d814772 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1220,6 +1220,12 @@ void __cpuinit cpu_init(void)
 	int cpu;
 	int i;
 
+	/*
+	 * Load microcode on this cpu if a valid microcode is available.
+	 * This is early microcode loading procedure.
+	 */
+	load_ucode_ap();
+
 	cpu = stack_smp_processor_id();
 	t = &per_cpu(init_tss, cpu);
 	oist = &per_cpu(orig_ist, cpu);
@@ -1311,6 +1317,8 @@ void __cpuinit cpu_init(void)
 	struct tss_struct *t = &per_cpu(init_tss, cpu);
 	struct thread_struct *thread = &curr->thread;
 
+	show_ucode_info_early();
+
 	if (cpumask_test_and_set_cpu(cpu, cpu_initialized_mask)) {
 		printk(KERN_WARNING "CPU#%d already initialized!\n", cpu);
 		for (;;)

[PATCH v5 05/12] x86/microcode_core_early.c: Define interfaces for early loading ucode

[Fenghua Yu]

From: Fenghua Yu <fenghua.yu@intel.com>

Define interfaces load_ucode_bsp() and load_ucode_ap() to load ucode on BSP and
AP in early boot time. These are generic interfaces. Internally they call
vendor specific implementations.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/x86/include/asm/microcode.h       | 14 +++++++
 arch/x86/kernel/microcode_core_early.c | 76 ++++++++++++++++++++++++++++++++++
 2 files changed, 90 insertions(+)
 create mode 100644 arch/x86/kernel/microcode_core_early.c

diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
index 43d921b..6825e2e 100644
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -57,4 +57,18 @@ static inline struct microcode_ops * __init init_amd_microcode(void)
 static inline void __exit exit_amd_microcode(void) {}
 #endif
 
+#ifdef CONFIG_MICROCODE_EARLY
+#define MAX_UCODE_COUNT 128
+extern void __init load_ucode_bsp(void);
+extern __init void load_ucode_ap(void);
+extern int __init save_microcode_in_initrd(void);
+#else
+static inline void __init load_ucode_bsp(void) {}
+static inline __init void load_ucode_ap(void) {}
+static inline int __init save_microcode_in_initrd(void)
+{
+	return 0;
+}
+#endif
+
 #endif /* _ASM_X86_MICROCODE_H */
diff --git a/arch/x86/kernel/microcode_core_early.c b/arch/x86/kernel/microcode_core_early.c
new file mode 100644
index 0000000..577db84
--- /dev/null
+++ b/arch/x86/kernel/microcode_core_early.c
@@ -0,0 +1,76 @@
+/*
+ *	X86 CPU microcode early update for Linux
+ *
+ *	Copyright (C) 2012 Fenghua Yu <fenghua.yu@intel.com>
+ *			   H Peter Anvin" <hpa@zytor.com>
+ *
+ *	This driver allows to early upgrade microcode on Intel processors
+ *	belonging to IA-32 family - PentiumPro, Pentium II,
+ *	Pentium III, Xeon, Pentium 4, etc.
+ *
+ *	Reference: Section 9.11 of Volume 3, IA-32 Intel Architecture
+ *	Software Developer's Manual.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <asm/microcode_intel.h>
+#include <asm/processor.h>
+
+#define QCHAR(a, b, c, d) ((a) + ((b) << 8) + ((c) << 16) + ((d) << 24))
+#define CPUID_INTEL1 QCHAR('G', 'e', 'n', 'u')
+#define CPUID_INTEL2 QCHAR('i', 'n', 'e', 'I')
+#define CPUID_INTEL3 QCHAR('n', 't', 'e', 'l')
+#define CPUID_AMD1 QCHAR('A', 'u', 't', 'h')
+#define CPUID_AMD2 QCHAR('e', 'n', 't', 'i')
+#define CPUID_AMD3 QCHAR('c', 'A', 'M', 'D')
+
+#define CPUID_IS(a, b, c, ebx, ecx, edx)	\
+		(!((ebx ^ (a))|(edx ^ (b))|(ecx ^ (c))))
+
+/*
+ * In early loading microcode phase on BSP, boot_cpu_data is not set up yet.
+ * x86_vendor() gets vendor id for BSP.
+ *
+ * In 32 bit AP case, accessing boot_cpu_data needs linear address. To simplify
+ * coding, we still use x86_vendor() to get vendor id for AP.
+ *
+ * x86_vendor() gets vendor information directly through cpuid.
+ */
+static int __cpuinit x86_vendor(void)
+{
+	u32 eax = 0x00000000;
+	u32 ebx, ecx = 0, edx;
+
+	if (!have_cpuid_p())
+		return X86_VENDOR_UNKNOWN;
+
+	native_cpuid(&eax, &ebx, &ecx, &edx);
+
+	if (CPUID_IS(CPUID_INTEL1, CPUID_INTEL2, CPUID_INTEL3, ebx, ecx, edx))
+		return X86_VENDOR_INTEL;
+
+	if (CPUID_IS(CPUID_AMD1, CPUID_AMD2, CPUID_AMD3, ebx, ecx, edx))
+		return X86_VENDOR_AMD;
+
+	return X86_VENDOR_UNKNOWN;
+}
+
+void __init load_ucode_bsp(void)
+{
+	int vendor = x86_vendor();
+
+	if (vendor == X86_VENDOR_INTEL)
+		load_ucode_intel_bsp();
+}
+
+void __cpuinit load_ucode_ap(void)
+{
+	int vendor = x86_vendor();
+
+	if (vendor == X86_VENDOR_INTEL)
+		load_ucode_intel_ap();
+}
-- 
1.8.0.1

[tip:x86/microcode] x86/microcode_core_early.c: Define interfaces for early loading ucode

[tip-bot for Fenghua Yu]

Commit-ID:  a8ebf6d1d6971b90a20f5bd0465e6d520377e33b
Gitweb:     http://git.kernel.org/tip/a8ebf6d1d6971b90a20f5bd0465e6d520377e33b
Author:     Fenghua Yu <fenghua.yu@intel.com>
AuthorDate: Thu, 20 Dec 2012 23:44:25 -0800
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 31 Jan 2013 13:19:12 -0800

x86/microcode_core_early.c: Define interfaces for early loading ucode

Define interfaces load_ucode_bsp() and load_ucode_ap() to load ucode on BSP and
AP in early boot time. These are generic interfaces. Internally they call
vendor specific implementations.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1356075872-3054-6-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/microcode.h       | 14 +++++++
 arch/x86/kernel/microcode_core_early.c | 76 ++++++++++++++++++++++++++++++++++
 2 files changed, 90 insertions(+)

diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
index 43d921b..6825e2e 100644
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -57,4 +57,18 @@ static inline struct microcode_ops * __init init_amd_microcode(void)
 static inline void __exit exit_amd_microcode(void) {}
 #endif
 
+#ifdef CONFIG_MICROCODE_EARLY
+#define MAX_UCODE_COUNT 128
+extern void __init load_ucode_bsp(void);
+extern __init void load_ucode_ap(void);
+extern int __init save_microcode_in_initrd(void);
+#else
+static inline void __init load_ucode_bsp(void) {}
+static inline __init void load_ucode_ap(void) {}
+static inline int __init save_microcode_in_initrd(void)
+{
+	return 0;
+}
+#endif
+
 #endif /* _ASM_X86_MICROCODE_H */
diff --git a/arch/x86/kernel/microcode_core_early.c b/arch/x86/kernel/microcode_core_early.c
new file mode 100644
index 0000000..577db84
--- /dev/null
+++ b/arch/x86/kernel/microcode_core_early.c
@@ -0,0 +1,76 @@
+/*
+ *	X86 CPU microcode early update for Linux
+ *
+ *	Copyright (C) 2012 Fenghua Yu <fenghua.yu@intel.com>
+ *			   H Peter Anvin" <hpa@zytor.com>
+ *
+ *	This driver allows to early upgrade microcode on Intel processors
+ *	belonging to IA-32 family - PentiumPro, Pentium II,
+ *	Pentium III, Xeon, Pentium 4, etc.
+ *
+ *	Reference: Section 9.11 of Volume 3, IA-32 Intel Architecture
+ *	Software Developer's Manual.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <asm/microcode_intel.h>
+#include <asm/processor.h>
+
+#define QCHAR(a, b, c, d) ((a) + ((b) << 8) + ((c) << 16) + ((d) << 24))
+#define CPUID_INTEL1 QCHAR('G', 'e', 'n', 'u')
+#define CPUID_INTEL2 QCHAR('i', 'n', 'e', 'I')
+#define CPUID_INTEL3 QCHAR('n', 't', 'e', 'l')
+#define CPUID_AMD1 QCHAR('A', 'u', 't', 'h')
+#define CPUID_AMD2 QCHAR('e', 'n', 't', 'i')
+#define CPUID_AMD3 QCHAR('c', 'A', 'M', 'D')
+
+#define CPUID_IS(a, b, c, ebx, ecx, edx)	\
+		(!((ebx ^ (a))|(edx ^ (b))|(ecx ^ (c))))
+
+/*
+ * In early loading microcode phase on BSP, boot_cpu_data is not set up yet.
+ * x86_vendor() gets vendor id for BSP.
+ *
+ * In 32 bit AP case, accessing boot_cpu_data needs linear address. To simplify
+ * coding, we still use x86_vendor() to get vendor id for AP.
+ *
+ * x86_vendor() gets vendor information directly through cpuid.
+ */
+static int __cpuinit x86_vendor(void)
+{
+	u32 eax = 0x00000000;
+	u32 ebx, ecx = 0, edx;
+
+	if (!have_cpuid_p())
+		return X86_VENDOR_UNKNOWN;
+
+	native_cpuid(&eax, &ebx, &ecx, &edx);
+
+	if (CPUID_IS(CPUID_INTEL1, CPUID_INTEL2, CPUID_INTEL3, ebx, ecx, edx))
+		return X86_VENDOR_INTEL;
+
+	if (CPUID_IS(CPUID_AMD1, CPUID_AMD2, CPUID_AMD3, ebx, ecx, edx))
+		return X86_VENDOR_AMD;
+
+	return X86_VENDOR_UNKNOWN;
+}
+
+void __init load_ucode_bsp(void)
+{
+	int vendor = x86_vendor();
+
+	if (vendor == X86_VENDOR_INTEL)
+		load_ucode_intel_bsp();
+}
+
+void __cpuinit load_ucode_ap(void)
+{
+	int vendor = x86_vendor();
+
+	if (vendor == X86_VENDOR_INTEL)
+		load_ucode_intel_ap();
+}

[PATCH v5 06/12] x86/microcode_intel_lib.c: Early update ucode on Intel's CPU

[Fenghua Yu]

From: Fenghua Yu <fenghua.yu@intel.com>

Define interfaces microcode_sanity_check() and get_matching_microcode(). They
are called both in early boot time and in microcode Intel driver.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/x86/kernel/microcode_intel_lib.c | 174 ++++++++++++++++++++++++++++++++++
 1 file changed, 174 insertions(+)
 create mode 100644 arch/x86/kernel/microcode_intel_lib.c

diff --git a/arch/x86/kernel/microcode_intel_lib.c b/arch/x86/kernel/microcode_intel_lib.c
new file mode 100644
index 0000000..ce69320
--- /dev/null
+++ b/arch/x86/kernel/microcode_intel_lib.c
@@ -0,0 +1,174 @@
+/*
+ *	Intel CPU Microcode Update Driver for Linux
+ *
+ *	Copyright (C) 2012 Fenghua Yu <fenghua.yu@intel.com>
+ *			   H Peter Anvin" <hpa@zytor.com>
+ *
+ *	This driver allows to upgrade microcode on Intel processors
+ *	belonging to IA-32 family - PentiumPro, Pentium II,
+ *	Pentium III, Xeon, Pentium 4, etc.
+ *
+ *	Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
+ *	Software Developer's Manual
+ *	Order Number 253668 or free download from:
+ *
+ *	http://developer.intel.com/Assets/PDF/manual/253668.pdf
+ *
+ *	For more information, go to http://www.urbanmyth.org/microcode
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ */
+#include <linux/firmware.h>
+#include <linux/uaccess.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <asm/microcode_intel.h>
+#include <asm/processor.h>
+#include <asm/msr.h>
+
+static inline int
+update_match_cpu(unsigned int csig, unsigned int cpf,
+		 unsigned int sig, unsigned int pf)
+{
+	return (!sigmatch(sig, csig, pf, cpf)) ? 0 : 1;
+}
+
+int
+update_match_revision(struct microcode_header_intel *mc_header, int rev)
+{
+	return (mc_header->rev <= rev) ? 0 : 1;
+}
+
+int microcode_sanity_check(void *mc, int print_err)
+{
+	unsigned long total_size, data_size, ext_table_size;
+	struct microcode_header_intel *mc_header = mc;
+	struct extended_sigtable *ext_header = NULL;
+	int sum, orig_sum, ext_sigcount = 0, i;
+	struct extended_signature *ext_sig;
+
+	total_size = get_totalsize(mc_header);
+	data_size = get_datasize(mc_header);
+
+	if (data_size + MC_HEADER_SIZE > total_size) {
+		if (print_err)
+			pr_err("error! Bad data size in microcode data file\n");
+		return -EINVAL;
+	}
+
+	if (mc_header->ldrver != 1 || mc_header->hdrver != 1) {
+		if (print_err)
+			pr_err("error! Unknown microcode update format\n");
+		return -EINVAL;
+	}
+	ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
+	if (ext_table_size) {
+		if ((ext_table_size < EXT_HEADER_SIZE)
+		 || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
+			if (print_err)
+				pr_err("error! Small exttable size in microcode data file\n");
+			return -EINVAL;
+		}
+		ext_header = mc + MC_HEADER_SIZE + data_size;
+		if (ext_table_size != exttable_size(ext_header)) {
+			if (print_err)
+				pr_err("error! Bad exttable size in microcode data file\n");
+			return -EFAULT;
+		}
+		ext_sigcount = ext_header->count;
+	}
+
+	/* check extended table checksum */
+	if (ext_table_size) {
+		int ext_table_sum = 0;
+		int *ext_tablep = (int *)ext_header;
+
+		i = ext_table_size / DWSIZE;
+		while (i--)
+			ext_table_sum += ext_tablep[i];
+		if (ext_table_sum) {
+			if (print_err)
+				pr_warn("aborting, bad extended signature table checksum\n");
+			return -EINVAL;
+		}
+	}
+
+	/* calculate the checksum */
+	orig_sum = 0;
+	i = (MC_HEADER_SIZE + data_size) / DWSIZE;
+	while (i--)
+		orig_sum += ((int *)mc)[i];
+	if (orig_sum) {
+		if (print_err)
+			pr_err("aborting, bad checksum\n");
+		return -EINVAL;
+	}
+	if (!ext_table_size)
+		return 0;
+	/* check extended signature checksum */
+	for (i = 0; i < ext_sigcount; i++) {
+		ext_sig = (void *)ext_header + EXT_HEADER_SIZE +
+			  EXT_SIGNATURE_SIZE * i;
+		sum = orig_sum
+			- (mc_header->sig + mc_header->pf + mc_header->cksum)
+			+ (ext_sig->sig + ext_sig->pf + ext_sig->cksum);
+		if (sum) {
+			if (print_err)
+				pr_err("aborting, bad checksum\n");
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(microcode_sanity_check);
+
+/*
+ * return 0 - no update found
+ * return 1 - found update
+ */
+int get_matching_sig(unsigned int csig, int cpf, void *mc, int rev)
+{
+	struct microcode_header_intel *mc_header = mc;
+	struct extended_sigtable *ext_header;
+	unsigned long total_size = get_totalsize(mc_header);
+	int ext_sigcount, i;
+	struct extended_signature *ext_sig;
+
+	if (update_match_cpu(csig, cpf, mc_header->sig, mc_header->pf))
+		return 1;
+
+	/* Look for ext. headers: */
+	if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE)
+		return 0;
+
+	ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE;
+	ext_sigcount = ext_header->count;
+	ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
+
+	for (i = 0; i < ext_sigcount; i++) {
+		if (update_match_cpu(csig, cpf, ext_sig->sig, ext_sig->pf))
+			return 1;
+		ext_sig++;
+	}
+	return 0;
+}
+
+/*
+ * return 0 - no update found
+ * return 1 - found update
+ */
+int get_matching_microcode(unsigned int csig, int cpf, void *mc, int rev)
+{
+	struct microcode_header_intel *mc_header = mc;
+
+	if (!update_match_revision(mc_header, rev))
+		return 0;
+
+	return get_matching_sig(csig, cpf, mc, rev);
+}
+EXPORT_SYMBOL_GPL(get_matching_microcode);
-- 
1.8.0.1

[tip:x86/microcode] x86/microcode_intel_lib.c: Early update ucode on Intel's CPU

[tip-bot for Fenghua Yu]

Commit-ID:  e666dfa273db1b12711eaec91facac5fec2ec851
Gitweb:     http://git.kernel.org/tip/e666dfa273db1b12711eaec91facac5fec2ec851
Author:     Fenghua Yu <fenghua.yu@intel.com>
AuthorDate: Thu, 20 Dec 2012 23:44:26 -0800
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 31 Jan 2013 13:19:14 -0800

x86/microcode_intel_lib.c: Early update ucode on Intel's CPU

Define interfaces microcode_sanity_check() and get_matching_microcode(). They
are called both in early boot time and in microcode Intel driver.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1356075872-3054-7-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/microcode_intel_lib.c | 174 ++++++++++++++++++++++++++++++++++
 1 file changed, 174 insertions(+)

diff --git a/arch/x86/kernel/microcode_intel_lib.c b/arch/x86/kernel/microcode_intel_lib.c
new file mode 100644
index 0000000..ce69320
--- /dev/null
+++ b/arch/x86/kernel/microcode_intel_lib.c
@@ -0,0 +1,174 @@
+/*
+ *	Intel CPU Microcode Update Driver for Linux
+ *
+ *	Copyright (C) 2012 Fenghua Yu <fenghua.yu@intel.com>
+ *			   H Peter Anvin" <hpa@zytor.com>
+ *
+ *	This driver allows to upgrade microcode on Intel processors
+ *	belonging to IA-32 family - PentiumPro, Pentium II,
+ *	Pentium III, Xeon, Pentium 4, etc.
+ *
+ *	Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
+ *	Software Developer's Manual
+ *	Order Number 253668 or free download from:
+ *
+ *	http://developer.intel.com/Assets/PDF/manual/253668.pdf
+ *
+ *	For more information, go to http://www.urbanmyth.org/microcode
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ */
+#include <linux/firmware.h>
+#include <linux/uaccess.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <asm/microcode_intel.h>
+#include <asm/processor.h>
+#include <asm/msr.h>
+
+static inline int
+update_match_cpu(unsigned int csig, unsigned int cpf,
+		 unsigned int sig, unsigned int pf)
+{
+	return (!sigmatch(sig, csig, pf, cpf)) ? 0 : 1;
+}
+
+int
+update_match_revision(struct microcode_header_intel *mc_header, int rev)
+{
+	return (mc_header->rev <= rev) ? 0 : 1;
+}
+
+int microcode_sanity_check(void *mc, int print_err)
+{
+	unsigned long total_size, data_size, ext_table_size;
+	struct microcode_header_intel *mc_header = mc;
+	struct extended_sigtable *ext_header = NULL;
+	int sum, orig_sum, ext_sigcount = 0, i;
+	struct extended_signature *ext_sig;
+
+	total_size = get_totalsize(mc_header);
+	data_size = get_datasize(mc_header);
+
+	if (data_size + MC_HEADER_SIZE > total_size) {
+		if (print_err)
+			pr_err("error! Bad data size in microcode data file\n");
+		return -EINVAL;
+	}
+
+	if (mc_header->ldrver != 1 || mc_header->hdrver != 1) {
+		if (print_err)
+			pr_err("error! Unknown microcode update format\n");
+		return -EINVAL;
+	}
+	ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
+	if (ext_table_size) {
+		if ((ext_table_size < EXT_HEADER_SIZE)
+		 || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
+			if (print_err)
+				pr_err("error! Small exttable size in microcode data file\n");
+			return -EINVAL;
+		}
+		ext_header = mc + MC_HEADER_SIZE + data_size;
+		if (ext_table_size != exttable_size(ext_header)) {
+			if (print_err)
+				pr_err("error! Bad exttable size in microcode data file\n");
+			return -EFAULT;
+		}
+		ext_sigcount = ext_header->count;
+	}
+
+	/* check extended table checksum */
+	if (ext_table_size) {
+		int ext_table_sum = 0;
+		int *ext_tablep = (int *)ext_header;
+
+		i = ext_table_size / DWSIZE;
+		while (i--)
+			ext_table_sum += ext_tablep[i];
+		if (ext_table_sum) {
+			if (print_err)
+				pr_warn("aborting, bad extended signature table checksum\n");
+			return -EINVAL;
+		}
+	}
+
+	/* calculate the checksum */
+	orig_sum = 0;
+	i = (MC_HEADER_SIZE + data_size) / DWSIZE;
+	while (i--)
+		orig_sum += ((int *)mc)[i];
+	if (orig_sum) {
+		if (print_err)
+			pr_err("aborting, bad checksum\n");
+		return -EINVAL;
+	}
+	if (!ext_table_size)
+		return 0;
+	/* check extended signature checksum */
+	for (i = 0; i < ext_sigcount; i++) {
+		ext_sig = (void *)ext_header + EXT_HEADER_SIZE +
+			  EXT_SIGNATURE_SIZE * i;
+		sum = orig_sum
+			- (mc_header->sig + mc_header->pf + mc_header->cksum)
+			+ (ext_sig->sig + ext_sig->pf + ext_sig->cksum);
+		if (sum) {
+			if (print_err)
+				pr_err("aborting, bad checksum\n");
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(microcode_sanity_check);
+
+/*
+ * return 0 - no update found
+ * return 1 - found update
+ */
+int get_matching_sig(unsigned int csig, int cpf, void *mc, int rev)
+{
+	struct microcode_header_intel *mc_header = mc;
+	struct extended_sigtable *ext_header;
+	unsigned long total_size = get_totalsize(mc_header);
+	int ext_sigcount, i;
+	struct extended_signature *ext_sig;
+
+	if (update_match_cpu(csig, cpf, mc_header->sig, mc_header->pf))
+		return 1;
+
+	/* Look for ext. headers: */
+	if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE)
+		return 0;
+
+	ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE;
+	ext_sigcount = ext_header->count;
+	ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
+
+	for (i = 0; i < ext_sigcount; i++) {
+		if (update_match_cpu(csig, cpf, ext_sig->sig, ext_sig->pf))
+			return 1;
+		ext_sig++;
+	}
+	return 0;
+}
+
+/*
+ * return 0 - no update found
+ * return 1 - found update
+ */
+int get_matching_microcode(unsigned int csig, int cpf, void *mc, int rev)
+{
+	struct microcode_header_intel *mc_header = mc;
+
+	if (!update_match_revision(mc_header, rev))
+		return 0;
+
+	return get_matching_sig(csig, cpf, mc, rev);
+}
+EXPORT_SYMBOL_GPL(get_matching_microcode);

[PATCH v5 07/12] x86/tlbflush.h: Define __native_flush_tlb_global_irq_disabled()

[Fenghua Yu]

From: Fenghua Yu <fenghua.yu@intel.com>

This function is called in __native_flush_tlb_global() and after
apply_microcode_early().

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/x86/include/asm/tlbflush.h | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
index 0fee48e..50a7fc0 100644
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -20,10 +20,20 @@ static inline void __native_flush_tlb(void)
 	native_write_cr3(native_read_cr3());
 }
 
+static inline void __native_flush_tlb_global_irq_disabled(void)
+{
+	unsigned long cr4;
+
+	cr4 = native_read_cr4();
+	/* clear PGE */
+	native_write_cr4(cr4 & ~X86_CR4_PGE);
+	/* write old PGE again and flush TLBs */
+	native_write_cr4(cr4);
+}
+
 static inline void __native_flush_tlb_global(void)
 {
 	unsigned long flags;
-	unsigned long cr4;
 
 	/*
 	 * Read-modify-write to CR4 - protect it from preemption and
@@ -32,11 +42,7 @@ static inline void __native_flush_tlb_global(void)
 	 */
 	raw_local_irq_save(flags);
 
-	cr4 = native_read_cr4();
-	/* clear PGE */
-	native_write_cr4(cr4 & ~X86_CR4_PGE);
-	/* write old PGE again and flush TLBs */
-	native_write_cr4(cr4);
+	__native_flush_tlb_global_irq_disabled();
 
 	raw_local_irq_restore(flags);
 }
-- 
1.8.0.1

[tip:x86/microcode] x86/tlbflush.h: Define __native_flush_tlb_global_irq_disabled()

[tip-bot for Fenghua Yu]

Commit-ID:  086fc8f8037bf16f55f82c66b26a8b834f7349ec
Gitweb:     http://git.kernel.org/tip/086fc8f8037bf16f55f82c66b26a8b834f7349ec
Author:     Fenghua Yu <fenghua.yu@intel.com>
AuthorDate: Thu, 20 Dec 2012 23:44:27 -0800
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 31 Jan 2013 13:19:16 -0800

x86/tlbflush.h: Define __native_flush_tlb_global_irq_disabled()

This function is called in __native_flush_tlb_global() and after
apply_microcode_early().

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1356075872-3054-8-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/tlbflush.h | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
index 0fee48e..50a7fc0 100644
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -20,10 +20,20 @@ static inline void __native_flush_tlb(void)
 	native_write_cr3(native_read_cr3());
 }
 
+static inline void __native_flush_tlb_global_irq_disabled(void)
+{
+	unsigned long cr4;
+
+	cr4 = native_read_cr4();
+	/* clear PGE */
+	native_write_cr4(cr4 & ~X86_CR4_PGE);
+	/* write old PGE again and flush TLBs */
+	native_write_cr4(cr4);
+}
+
 static inline void __native_flush_tlb_global(void)
 {
 	unsigned long flags;
-	unsigned long cr4;
 
 	/*
 	 * Read-modify-write to CR4 - protect it from preemption and
@@ -32,11 +42,7 @@ static inline void __native_flush_tlb_global(void)
 	 */
 	raw_local_irq_save(flags);
 
-	cr4 = native_read_cr4();
-	/* clear PGE */
-	native_write_cr4(cr4 & ~X86_CR4_PGE);
-	/* write old PGE again and flush TLBs */
-	native_write_cr4(cr4);
+	__native_flush_tlb_global_irq_disabled();
 
 	raw_local_irq_restore(flags);
 }

[PATCH v5 08/12] x86/microcode_intel_early.c: Early update ucode on Intel's CPU

[Fenghua Yu]

From: Fenghua Yu <fenghua.yu@intel.com>

Implementation of early update ucode on Intel's CPU.

load_ucode_intel_bsp() scans ucode in initrd image file which is a cpio format
ucode followed by ordinary initrd image file. The binary ucode file is stored
in kernel/x86/microcode/GenuineIntel.bin in the cpio data. All ucode
patches with the same model as BSP are saved in memory. A matching ucode patch
is updated on BSP.

load_ucode_intel_ap() reads saved ucoded patches and updates ucode on AP.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/x86/kernel/microcode_intel_early.c | 796 ++++++++++++++++++++++++++++++++
 1 file changed, 796 insertions(+)
 create mode 100644 arch/x86/kernel/microcode_intel_early.c

diff --git a/arch/x86/kernel/microcode_intel_early.c b/arch/x86/kernel/microcode_intel_early.c
new file mode 100644
index 0000000..7890bc8
--- /dev/null
+++ b/arch/x86/kernel/microcode_intel_early.c
@@ -0,0 +1,796 @@
+/*
+ *	Intel CPU microcode early update for Linux
+ *
+ *	Copyright (C) 2012 Fenghua Yu <fenghua.yu@intel.com>
+ *			   H Peter Anvin" <hpa@zytor.com>
+ *
+ *	This allows to early upgrade microcode on Intel processors
+ *	belonging to IA-32 family - PentiumPro, Pentium II,
+ *	Pentium III, Xeon, Pentium 4, etc.
+ *
+ *	Reference: Section 9.11 of Volume 3, IA-32 Intel Architecture
+ *	Software Developer's Manual.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/earlycpio.h>
+#include <linux/initrd.h>
+#include <linux/cpu.h>
+#include <asm/msr.h>
+#include <asm/microcode_intel.h>
+#include <asm/processor.h>
+#include <asm/tlbflush.h>
+#include <asm/setup.h>
+
+unsigned long mc_saved_in_initrd[MAX_UCODE_COUNT];
+struct mc_saved_data {
+	unsigned int mc_saved_count;
+	struct microcode_intel **mc_saved;
+} mc_saved_data;
+
+static enum ucode_state __cpuinit
+generic_load_microcode_early(struct microcode_intel **mc_saved_p,
+			     unsigned int mc_saved_count,
+			     struct ucode_cpu_info *uci)
+{
+	struct microcode_intel *ucode_ptr, *new_mc = NULL;
+	int new_rev = uci->cpu_sig.rev;
+	enum ucode_state state = UCODE_OK;
+	unsigned int mc_size;
+	struct microcode_header_intel *mc_header;
+	unsigned int csig = uci->cpu_sig.sig;
+	unsigned int cpf = uci->cpu_sig.pf;
+	int i;
+
+	for (i = 0; i < mc_saved_count; i++) {
+		ucode_ptr = mc_saved_p[i];
+
+		mc_header = (struct microcode_header_intel *)ucode_ptr;
+		mc_size = get_totalsize(mc_header);
+		if (get_matching_microcode(csig, cpf, ucode_ptr, new_rev)) {
+			new_rev = mc_header->rev;
+			new_mc  = ucode_ptr;
+		}
+	}
+
+	if (!new_mc) {
+		state = UCODE_NFOUND;
+		goto out;
+	}
+
+	uci->mc = (struct microcode_intel *)new_mc;
+out:
+	return state;
+}
+
+static void __cpuinit
+microcode_pointer(struct microcode_intel **mc_saved,
+		  unsigned long *mc_saved_in_initrd,
+		  unsigned long initrd_start, int mc_saved_count)
+{
+	int i;
+
+	for (i = 0; i < mc_saved_count; i++)
+		mc_saved[i] = (struct microcode_intel *)
+			      (mc_saved_in_initrd[i] + initrd_start);
+}
+
+#ifdef CONFIG_X86_32
+static void __cpuinit
+microcode_phys(struct microcode_intel **mc_saved_tmp,
+	       struct mc_saved_data *mc_saved_data)
+{
+	int i;
+	struct microcode_intel ***mc_saved;
+
+	mc_saved = (struct microcode_intel ***)
+		   __pa_symbol(&mc_saved_data->mc_saved);
+	for (i = 0; i < mc_saved_data->mc_saved_count; i++) {
+		struct microcode_intel *p;
+
+		p = *(struct microcode_intel **)
+			__pa(mc_saved_data->mc_saved + i);
+		mc_saved_tmp[i] = (struct microcode_intel *)__pa(p);
+	}
+}
+#endif
+
+static enum ucode_state __cpuinit
+load_microcode(struct mc_saved_data *mc_saved_data,
+	       unsigned long *mc_saved_in_initrd,
+	       unsigned long initrd_start,
+	       struct ucode_cpu_info *uci)
+{
+	struct microcode_intel *mc_saved_tmp[MAX_UCODE_COUNT];
+	unsigned int count = mc_saved_data->mc_saved_count;
+
+	if (!mc_saved_data->mc_saved) {
+		microcode_pointer(mc_saved_tmp, mc_saved_in_initrd,
+				  initrd_start, count);
+
+		return generic_load_microcode_early(mc_saved_tmp, count, uci);
+	} else {
+#ifdef CONFIG_X86_32
+		microcode_phys(mc_saved_tmp, mc_saved_data);
+		return generic_load_microcode_early(mc_saved_tmp, count, uci);
+#else
+		return generic_load_microcode_early(mc_saved_data->mc_saved,
+						    count, uci);
+#endif
+	}
+}
+
+static u8 get_x86_family(unsigned long sig)
+{
+	u8 x86;
+
+	x86 = (sig >> 8) & 0xf;
+
+	if (x86 == 0xf)
+		x86 += (sig >> 20) & 0xff;
+
+	return x86;
+}
+
+static u8 get_x86_model(unsigned long sig)
+{
+	u8 x86, x86_model;
+
+	x86 = get_x86_family(sig);
+	x86_model = (sig >> 4) & 0xf;
+
+	if (x86 == 0x6 || x86 == 0xf)
+		x86_model += ((sig >> 16) & 0xf) << 4;
+
+	return x86_model;
+}
+
+/*
+ * Given CPU signature and a microcode patch, this function finds if the
+ * microcode patch has matching family and model with the CPU.
+ */
+static enum ucode_state
+matching_model_microcode(struct microcode_header_intel *mc_header,
+			unsigned long sig)
+{
+	u8 x86, x86_model;
+	u8 x86_ucode, x86_model_ucode;
+	struct extended_sigtable *ext_header;
+	unsigned long total_size = get_totalsize(mc_header);
+	unsigned long data_size = get_datasize(mc_header);
+	int ext_sigcount, i;
+	struct extended_signature *ext_sig;
+
+	x86 = get_x86_family(sig);
+	x86_model = get_x86_model(sig);
+
+	x86_ucode = get_x86_family(mc_header->sig);
+	x86_model_ucode = get_x86_model(mc_header->sig);
+
+	if (x86 == x86_ucode && x86_model == x86_model_ucode)
+		return UCODE_OK;
+
+	/* Look for ext. headers: */
+	if (total_size <= data_size + MC_HEADER_SIZE)
+		return UCODE_NFOUND;
+
+	ext_header = (struct extended_sigtable *)
+		     mc_header + data_size + MC_HEADER_SIZE;
+	ext_sigcount = ext_header->count;
+	ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
+
+	for (i = 0; i < ext_sigcount; i++) {
+		x86_ucode = get_x86_family(ext_sig->sig);
+		x86_model_ucode = get_x86_model(ext_sig->sig);
+
+		if (x86 == x86_ucode && x86_model == x86_model_ucode)
+			return UCODE_OK;
+
+		ext_sig++;
+	}
+
+	return UCODE_NFOUND;
+}
+
+static int
+save_microcode(struct mc_saved_data *mc_saved_data,
+	       struct microcode_intel **mc_saved_src,
+	       unsigned int mc_saved_count)
+{
+	int i, j;
+	struct microcode_intel **mc_saved_p;
+	int ret;
+
+	if (!mc_saved_count)
+		return -EINVAL;
+
+	/*
+	 * Copy new microcode data.
+	 */
+	mc_saved_p = kmalloc(mc_saved_count*sizeof(struct microcode_intel *),
+			     GFP_KERNEL);
+	if (!mc_saved_p)
+		return -ENOMEM;
+
+	for (i = 0; i < mc_saved_count; i++) {
+		struct microcode_intel *mc = mc_saved_src[i];
+		struct microcode_header_intel *mc_header = &mc->hdr;
+		unsigned long mc_size = get_totalsize(mc_header);
+		mc_saved_p[i] = kmalloc(mc_size, GFP_KERNEL);
+		if (!mc_saved_p[i]) {
+			ret = -ENOMEM;
+			goto err;
+		}
+		if (!mc_saved_src[i]) {
+			ret = -EINVAL;
+			goto err;
+		}
+		memcpy(mc_saved_p[i], mc, mc_size);
+	}
+
+	/*
+	 * Point to newly saved microcode.
+	 */
+	mc_saved_data->mc_saved = mc_saved_p;
+	mc_saved_data->mc_saved_count = mc_saved_count;
+
+	return 0;
+
+err:
+	for (j = 0; j <= i; j++)
+		kfree(mc_saved_p[j]);
+	kfree(mc_saved_p);
+
+	return ret;
+}
+
+/*
+ * A microcode patch in ucode_ptr is saved into mc_saved
+ * - if it has matching signature and newer revision compared to an existing
+ *   patch mc_saved.
+ * - or if it is a newly discovered microcode patch.
+ *
+ * The microcode patch should have matching model with CPU.
+ */
+static void _save_mc(struct microcode_intel **mc_saved, u8 *ucode_ptr,
+		     unsigned int *mc_saved_count_p)
+{
+	int i;
+	int found = 0;
+	unsigned int mc_saved_count = *mc_saved_count_p;
+	struct microcode_header_intel *mc_header;
+
+	mc_header = (struct microcode_header_intel *)ucode_ptr;
+	for (i = 0; i < mc_saved_count; i++) {
+		unsigned int sig, pf;
+		unsigned int new_rev;
+		struct microcode_header_intel *mc_saved_header =
+			     (struct microcode_header_intel *)mc_saved[i];
+		sig = mc_saved_header->sig;
+		pf = mc_saved_header->pf;
+		new_rev = mc_header->rev;
+
+		if (get_matching_sig(sig, pf, ucode_ptr, new_rev)) {
+			found = 1;
+			if (update_match_revision(mc_header, new_rev)) {
+				/*
+				 * Found an older ucode saved before.
+				 * Replace the older one with this newer
+				 * one.
+				 */
+				mc_saved[i] =
+					(struct microcode_intel *)ucode_ptr;
+				break;
+			}
+		}
+	}
+	if (i >= mc_saved_count && !found)
+		/*
+		 * This ucode is first time discovered in ucode file.
+		 * Save it to memory.
+		 */
+		mc_saved[mc_saved_count++] =
+				 (struct microcode_intel *)ucode_ptr;
+
+	*mc_saved_count_p = mc_saved_count;
+}
+
+/*
+ * Get microcode matching with BSP's model. Only CPUs with the same model as
+ * BSP can stay in the platform.
+ */
+static enum ucode_state __init
+get_matching_model_microcode(int cpu, unsigned long start,
+			     void *data, size_t size,
+			     struct mc_saved_data *mc_saved_data,
+			     unsigned long *mc_saved_in_initrd,
+			     struct ucode_cpu_info *uci)
+{
+	u8 *ucode_ptr = data;
+	unsigned int leftover = size;
+	enum ucode_state state = UCODE_OK;
+	unsigned int mc_size;
+	struct microcode_header_intel *mc_header;
+	struct microcode_intel *mc_saved_tmp[MAX_UCODE_COUNT];
+	unsigned int mc_saved_count = mc_saved_data->mc_saved_count;
+	int i;
+
+	while (leftover) {
+		mc_header = (struct microcode_header_intel *)ucode_ptr;
+
+		mc_size = get_totalsize(mc_header);
+		if (!mc_size || mc_size > leftover ||
+			microcode_sanity_check(ucode_ptr, 0) < 0)
+			break;
+
+		leftover -= mc_size;
+
+		/*
+		 * Since APs with same family and model as the BSP may boot in
+		 * the platform, we need to find and save microcode patches
+		 * with the same family and model as the BSP.
+		 */
+		if (matching_model_microcode(mc_header, uci->cpu_sig.sig) !=
+			 UCODE_OK) {
+			ucode_ptr += mc_size;
+			continue;
+		}
+
+		_save_mc(mc_saved_tmp, ucode_ptr, &mc_saved_count);
+
+		ucode_ptr += mc_size;
+	}
+
+	if (leftover) {
+		state = UCODE_ERROR;
+		goto out;
+	}
+
+	if (mc_saved_count == 0) {
+		state = UCODE_NFOUND;
+		goto out;
+	}
+
+	for (i = 0; i < mc_saved_count; i++)
+		mc_saved_in_initrd[i] = (unsigned long)mc_saved_tmp[i] - start;
+
+	mc_saved_data->mc_saved_count = mc_saved_count;
+out:
+	return state;
+}
+
+#define native_rdmsr(msr, val1, val2)		\
+do {						\
+	u64 __val = native_read_msr((msr));	\
+	(void)((val1) = (u32)__val);		\
+	(void)((val2) = (u32)(__val >> 32));	\
+} while (0)
+
+#define native_wrmsr(msr, low, high)		\
+	native_write_msr(msr, low, high);
+
+static int __cpuinit collect_cpu_info_early(struct ucode_cpu_info *uci)
+{
+	unsigned int val[2];
+	u8 x86, x86_model;
+	struct cpu_signature csig;
+	unsigned int eax, ebx, ecx, edx;
+
+	csig.sig = 0;
+	csig.pf = 0;
+	csig.rev = 0;
+
+	memset(uci, 0, sizeof(*uci));
+
+	eax = 0x00000001;
+	ecx = 0;
+	native_cpuid(&eax, &ebx, &ecx, &edx);
+	csig.sig = eax;
+
+	x86 = get_x86_family(csig.sig);
+	x86_model = get_x86_model(csig.sig);
+
+	if ((x86_model >= 5) || (x86 > 6)) {
+		/* get processor flags from MSR 0x17 */
+		native_rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
+		csig.pf = 1 << ((val[1] >> 18) & 7);
+	}
+	native_wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+
+	/* As documented in the SDM: Do a CPUID 1 here */
+	sync_core();
+
+	/* get the current revision from MSR 0x8B */
+	native_rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
+
+	csig.rev = val[1];
+
+	uci->cpu_sig = csig;
+	uci->valid = 1;
+
+	return 0;
+}
+
+#ifdef DEBUG
+static void __ref show_saved_mc(void)
+{
+	int i, j;
+	unsigned int sig, pf, rev, total_size, data_size, date;
+	struct ucode_cpu_info uci;
+
+	if (mc_saved_data.mc_saved_count == 0) {
+		pr_debug("no micorcode data saved.\n");
+		return;
+	}
+	pr_debug("Total microcode saved: %d\n", mc_saved_data.mc_saved_count);
+
+	collect_cpu_info_early(&uci);
+
+	sig = uci.cpu_sig.sig;
+	pf = uci.cpu_sig.pf;
+	rev = uci.cpu_sig.rev;
+	pr_debug("CPU%d: sig=0x%x, pf=0x%x, rev=0x%x\n",
+		 smp_processor_id(), sig, pf, rev);
+
+	for (i = 0; i < mc_saved_data.mc_saved_count; i++) {
+		struct microcode_header_intel *mc_saved_header;
+		struct extended_sigtable *ext_header;
+		int ext_sigcount;
+		struct extended_signature *ext_sig;
+
+		mc_saved_header = (struct microcode_header_intel *)
+				  mc_saved_data.mc_saved[i];
+		sig = mc_saved_header->sig;
+		pf = mc_saved_header->pf;
+		rev = mc_saved_header->rev;
+		total_size = get_totalsize(mc_saved_header);
+		data_size = get_datasize(mc_saved_header);
+		date = mc_saved_header->date;
+
+		pr_debug("mc_saved[%d]: sig=0x%x, pf=0x%x, rev=0x%x, toal size=0x%x, date = %04x-%02x-%02x\n",
+			 i, sig, pf, rev, total_size,
+			 date & 0xffff,
+			 date >> 24,
+			 (date >> 16) & 0xff);
+
+		/* Look for ext. headers: */
+		if (total_size <= data_size + MC_HEADER_SIZE)
+			continue;
+
+		ext_header = (struct extended_sigtable *)
+			     mc_saved_header + data_size + MC_HEADER_SIZE;
+		ext_sigcount = ext_header->count;
+		ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
+
+		for (j = 0; j < ext_sigcount; j++) {
+			sig = ext_sig->sig;
+			pf = ext_sig->pf;
+
+			pr_debug("\tExtended[%d]: sig=0x%x, pf=0x%x\n",
+				 j, sig, pf);
+
+			ext_sig++;
+		}
+
+	}
+}
+#else
+static inline void show_saved_mc(void)
+{
+}
+#endif
+
+#if defined(CONFIG_MICROCODE_INTEL_EARLY) && defined(CONFIG_HOTPLUG_CPU)
+/*
+ * Save this mc into mc_saved_data. So it will be loaded early when a CPU is
+ * hot added or resumes.
+ *
+ * Please make sure this mc should be a valid microcode patch before calling
+ * this function.
+ */
+int save_mc_for_early(u8 *mc)
+{
+	struct microcode_intel *mc_saved_tmp[MAX_UCODE_COUNT];
+	unsigned int mc_saved_count_init;
+	unsigned int mc_saved_count;
+	struct microcode_intel **mc_saved;
+	int ret = 0;
+	int i;
+
+	/*
+	 * Hold hotplug lock so mc_saved_data is not accessed by a CPU in
+	 * hotplug.
+	 */
+	cpu_hotplug_driver_lock();
+
+	mc_saved_count_init = mc_saved_data.mc_saved_count;
+	mc_saved_count = mc_saved_data.mc_saved_count;
+	mc_saved = mc_saved_data.mc_saved;
+
+	if (mc_saved && mc_saved_count)
+		memcpy(mc_saved_tmp, mc_saved,
+		       mc_saved_count * sizeof(struct mirocode_intel *));
+	/*
+	 * Save the microcode patch mc in mc_save_tmp structure if it's a newer
+	 * version.
+	 */
+
+	_save_mc(mc_saved_tmp, mc, &mc_saved_count);
+
+	/*
+	 * Save the mc_save_tmp in global mc_saved_data.
+	 */
+	ret = save_microcode(&mc_saved_data, mc_saved_tmp, mc_saved_count);
+	if (ret) {
+		pr_err("Can not save microcode patch.\n");
+		goto out;
+	}
+
+	show_saved_mc();
+
+	/*
+	 * Free old saved microcod data.
+	 */
+	if (mc_saved) {
+		for (i = 0; i < mc_saved_count_init; i++)
+			kfree(mc_saved[i]);
+		kfree(mc_saved);
+	}
+
+out:
+	cpu_hotplug_driver_unlock();
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(save_mc_for_early);
+#endif
+
+static __initdata char ucode_name[] = "kernel/x86/microcode/GenuineIntel.bin";
+static __init enum ucode_state
+scan_microcode(unsigned long start, unsigned long end,
+		struct mc_saved_data *mc_saved_data,
+		unsigned long *mc_saved_in_initrd,
+		struct ucode_cpu_info *uci)
+{
+	unsigned int size = end - start + 1;
+	struct cpio_data cd;
+	long offset = 0;
+#ifdef CONFIG_X86_32
+	char *p = (char *)__pa_symbol(ucode_name);
+#else
+	char *p = ucode_name;
+#endif
+
+	cd.data = NULL;
+	cd.size = 0;
+
+	cd = find_cpio_data(p, (void *)start, size, &offset);
+	if (!cd.data)
+		return UCODE_ERROR;
+
+
+	return get_matching_model_microcode(0, start, cd.data, cd.size,
+					    mc_saved_data, mc_saved_in_initrd,
+					    uci);
+}
+
+/*
+ * Print ucode update info.
+ */
+static void __cpuinit
+print_ucode_info(struct ucode_cpu_info *uci, unsigned int date)
+{
+	int cpu = smp_processor_id();
+
+	pr_info("CPU%d microcode updated early to revision 0x%x, date = %04x-%02x-%02x\n",
+		cpu,
+		uci->cpu_sig.rev,
+		date & 0xffff,
+		date >> 24,
+		(date >> 16) & 0xff);
+}
+
+#ifdef CONFIG_X86_32
+
+static int delay_ucode_info;
+static int current_mc_date;
+
+/*
+ * Print early updated ucode info after printk works. This is delayed info dump.
+ */
+void __cpuinit show_ucode_info_early(void)
+{
+	struct ucode_cpu_info uci;
+
+	if (delay_ucode_info) {
+		collect_cpu_info_early(&uci);
+		print_ucode_info(&uci, current_mc_date);
+		delay_ucode_info = 0;
+	}
+}
+
+/*
+ * At this point, we can not call printk() yet. Keep microcode patch number in
+ * mc_saved_data.mc_saved and delay printing microcode info in
+ * show_ucode_info_early() until printk() works.
+ */
+static void __cpuinit print_ucode(struct ucode_cpu_info *uci)
+{
+	struct microcode_intel *mc_intel;
+	int *delay_ucode_info_p;
+	int *current_mc_date_p;
+
+	mc_intel = uci->mc;
+	if (mc_intel == NULL)
+		return;
+
+	delay_ucode_info_p = (int *)__pa_symbol(&delay_ucode_info);
+	current_mc_date_p = (int *)__pa_symbol(&current_mc_date);
+
+	*delay_ucode_info_p = 1;
+	*current_mc_date_p = mc_intel->hdr.date;
+}
+#else
+
+/*
+ * Flush global tlb. We only do this in x86_64 where paging has been enabled
+ * already and PGE should be enabled as well.
+ */
+static inline void __cpuinit flush_tlb_early(void)
+{
+	__native_flush_tlb_global_irq_disabled();
+}
+
+static inline void __cpuinit print_ucode(struct ucode_cpu_info *uci)
+{
+	struct microcode_intel *mc_intel;
+
+	mc_intel = uci->mc;
+	if (mc_intel == NULL)
+		return;
+
+	print_ucode_info(uci, mc_intel->hdr.date);
+}
+#endif
+
+static int apply_microcode_early(struct mc_saved_data *mc_saved_data,
+				 struct ucode_cpu_info *uci)
+{
+	struct microcode_intel *mc_intel;
+	unsigned int val[2];
+
+	mc_intel = uci->mc;
+	if (mc_intel == NULL)
+		return 0;
+
+	/* write microcode via MSR 0x79 */
+	native_wrmsr(MSR_IA32_UCODE_WRITE,
+	      (unsigned long) mc_intel->bits,
+	      (unsigned long) mc_intel->bits >> 16 >> 16);
+	native_wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+
+	/* As documented in the SDM: Do a CPUID 1 here */
+	sync_core();
+
+	/* get the current revision from MSR 0x8B */
+	native_rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
+	if (val[1] != mc_intel->hdr.rev)
+		return -1;
+
+#ifdef CONFIG_X86_64
+	/* Flush global tlb. This is precaution. */
+	flush_tlb_early();
+#endif
+	uci->cpu_sig.rev = val[1];
+
+	print_ucode(uci);
+
+	return 0;
+}
+
+/*
+ * This function converts microcode patch offsets previously stored in
+ * mc_saved_in_initrd to pointers and stores the pointers in mc_saved_data.
+ */
+int __init save_microcode_in_initrd(void)
+{
+	unsigned int count = mc_saved_data.mc_saved_count;
+	struct microcode_intel *mc_saved[MAX_UCODE_COUNT];
+	int ret = 0;
+
+	if (count == 0)
+		return ret;
+
+	microcode_pointer(mc_saved, mc_saved_in_initrd, initrd_start, count);
+	ret = save_microcode(&mc_saved_data, mc_saved, count);
+	if (ret)
+		pr_err("Can not save microcod patches from initrd");
+
+	show_saved_mc();
+
+	return ret;
+}
+
+static void __init
+_load_ucode_intel_bsp(struct mc_saved_data *mc_saved_data,
+		      unsigned long *mc_saved_in_initrd,
+		      unsigned long initrd_start_early,
+		      unsigned long initrd_end_early,
+		      struct ucode_cpu_info *uci)
+{
+	collect_cpu_info_early(uci);
+	scan_microcode(initrd_start_early, initrd_end_early, mc_saved_data,
+		       mc_saved_in_initrd, uci);
+	load_microcode(mc_saved_data, mc_saved_in_initrd,
+		       initrd_start_early, uci);
+	apply_microcode_early(mc_saved_data, uci);
+}
+
+void __init
+load_ucode_intel_bsp(void)
+{
+	u64 ramdisk_image, ramdisk_size;
+	unsigned long initrd_start_early, initrd_end_early;
+	struct ucode_cpu_info uci;
+#ifdef CONFIG_X86_32
+	struct boot_params *boot_params_p;
+
+	boot_params_p = (struct boot_params *)__pa_symbol(&boot_params);
+	ramdisk_image = boot_params_p->hdr.ramdisk_image;
+	ramdisk_size  = boot_params_p->hdr.ramdisk_size;
+	initrd_start_early = ramdisk_image;
+	initrd_end_early = initrd_start_early + ramdisk_size;
+
+	_load_ucode_intel_bsp(
+		(struct mc_saved_data *)__pa_symbol(&mc_saved_data),
+		(unsigned long *)__pa_symbol(&mc_saved_in_initrd),
+		initrd_start_early, initrd_end_early, &uci);
+#else
+	ramdisk_image = boot_params.hdr.ramdisk_image;
+	ramdisk_size  = boot_params.hdr.ramdisk_size;
+	initrd_start_early = ramdisk_image + PAGE_OFFSET;
+	initrd_end_early = initrd_start_early + ramdisk_size;
+
+	_load_ucode_intel_bsp(&mc_saved_data, mc_saved_in_initrd,
+			      initrd_start_early, initrd_end_early, &uci);
+#endif
+}
+
+void __cpuinit load_ucode_intel_ap(void)
+{
+	struct mc_saved_data *mc_saved_data_p;
+	struct ucode_cpu_info uci;
+	unsigned long *mc_saved_in_initrd_p;
+	unsigned long initrd_start_addr;
+#ifdef CONFIG_X86_32
+	unsigned long *initrd_start_p;
+
+	mc_saved_in_initrd_p =
+		(unsigned long *)__pa_symbol(mc_saved_in_initrd);
+	mc_saved_data_p = (struct mc_saved_data *)__pa_symbol(&mc_saved_data);
+	initrd_start_p = (unsigned long *)__pa_symbol(&initrd_start);
+	initrd_start_addr = (unsigned long)__pa_symbol(*initrd_start_p);
+#else
+	mc_saved_data_p = &mc_saved_data;
+	mc_saved_in_initrd_p = mc_saved_in_initrd;
+	initrd_start_addr = initrd_start;
+#endif
+
+	/*
+	 * If there is no valid ucode previously saved in memory, no need to
+	 * update ucode on this AP.
+	 */
+	if (mc_saved_data_p->mc_saved_count == 0)
+		return;
+
+	collect_cpu_info_early(&uci);
+	load_microcode(mc_saved_data_p, mc_saved_in_initrd_p,
+		       initrd_start_addr, &uci);
+	apply_microcode_early(mc_saved_data_p, &uci);
+}
-- 
1.8.0.1

[tip:x86/microcode] x86/microcode_intel_early.c: Early update ucode on Intel's CPU

[tip-bot for Fenghua Yu]

Commit-ID:  ec400ddeff200b068ddc6c70f7321f49ecf32ed5
Gitweb:     http://git.kernel.org/tip/ec400ddeff200b068ddc6c70f7321f49ecf32ed5
Author:     Fenghua Yu <fenghua.yu@intel.com>
AuthorDate: Thu, 20 Dec 2012 23:44:28 -0800
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 31 Jan 2013 13:19:18 -0800

x86/microcode_intel_early.c: Early update ucode on Intel's CPU

Implementation of early update ucode on Intel's CPU.

load_ucode_intel_bsp() scans ucode in initrd image file which is a cpio format
ucode followed by ordinary initrd image file. The binary ucode file is stored
in kernel/x86/microcode/GenuineIntel.bin in the cpio data. All ucode
patches with the same model as BSP are saved in memory. A matching ucode patch
is updated on BSP.

load_ucode_intel_ap() reads saved ucoded patches and updates ucode on AP.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1356075872-3054-9-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/microcode_intel_early.c | 796 ++++++++++++++++++++++++++++++++
 1 file changed, 796 insertions(+)

diff --git a/arch/x86/kernel/microcode_intel_early.c b/arch/x86/kernel/microcode_intel_early.c
new file mode 100644
index 0000000..7890bc8
--- /dev/null
+++ b/arch/x86/kernel/microcode_intel_early.c
@@ -0,0 +1,796 @@
+/*
+ *	Intel CPU microcode early update for Linux
+ *
+ *	Copyright (C) 2012 Fenghua Yu <fenghua.yu@intel.com>
+ *			   H Peter Anvin" <hpa@zytor.com>
+ *
+ *	This allows to early upgrade microcode on Intel processors
+ *	belonging to IA-32 family - PentiumPro, Pentium II,
+ *	Pentium III, Xeon, Pentium 4, etc.
+ *
+ *	Reference: Section 9.11 of Volume 3, IA-32 Intel Architecture
+ *	Software Developer's Manual.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/earlycpio.h>
+#include <linux/initrd.h>
+#include <linux/cpu.h>
+#include <asm/msr.h>
+#include <asm/microcode_intel.h>
+#include <asm/processor.h>
+#include <asm/tlbflush.h>
+#include <asm/setup.h>
+
+unsigned long mc_saved_in_initrd[MAX_UCODE_COUNT];
+struct mc_saved_data {
+	unsigned int mc_saved_count;
+	struct microcode_intel **mc_saved;
+} mc_saved_data;
+
+static enum ucode_state __cpuinit
+generic_load_microcode_early(struct microcode_intel **mc_saved_p,
+			     unsigned int mc_saved_count,
+			     struct ucode_cpu_info *uci)
+{
+	struct microcode_intel *ucode_ptr, *new_mc = NULL;
+	int new_rev = uci->cpu_sig.rev;
+	enum ucode_state state = UCODE_OK;
+	unsigned int mc_size;
+	struct microcode_header_intel *mc_header;
+	unsigned int csig = uci->cpu_sig.sig;
+	unsigned int cpf = uci->cpu_sig.pf;
+	int i;
+
+	for (i = 0; i < mc_saved_count; i++) {
+		ucode_ptr = mc_saved_p[i];
+
+		mc_header = (struct microcode_header_intel *)ucode_ptr;
+		mc_size = get_totalsize(mc_header);
+		if (get_matching_microcode(csig, cpf, ucode_ptr, new_rev)) {
+			new_rev = mc_header->rev;
+			new_mc  = ucode_ptr;
+		}
+	}
+
+	if (!new_mc) {
+		state = UCODE_NFOUND;
+		goto out;
+	}
+
+	uci->mc = (struct microcode_intel *)new_mc;
+out:
+	return state;
+}
+
+static void __cpuinit
+microcode_pointer(struct microcode_intel **mc_saved,
+		  unsigned long *mc_saved_in_initrd,
+		  unsigned long initrd_start, int mc_saved_count)
+{
+	int i;
+
+	for (i = 0; i < mc_saved_count; i++)
+		mc_saved[i] = (struct microcode_intel *)
+			      (mc_saved_in_initrd[i] + initrd_start);
+}
+
+#ifdef CONFIG_X86_32
+static void __cpuinit
+microcode_phys(struct microcode_intel **mc_saved_tmp,
+	       struct mc_saved_data *mc_saved_data)
+{
+	int i;
+	struct microcode_intel ***mc_saved;
+
+	mc_saved = (struct microcode_intel ***)
+		   __pa_symbol(&mc_saved_data->mc_saved);
+	for (i = 0; i < mc_saved_data->mc_saved_count; i++) {
+		struct microcode_intel *p;
+
+		p = *(struct microcode_intel **)
+			__pa(mc_saved_data->mc_saved + i);
+		mc_saved_tmp[i] = (struct microcode_intel *)__pa(p);
+	}
+}
+#endif
+
+static enum ucode_state __cpuinit
+load_microcode(struct mc_saved_data *mc_saved_data,
+	       unsigned long *mc_saved_in_initrd,
+	       unsigned long initrd_start,
+	       struct ucode_cpu_info *uci)
+{
+	struct microcode_intel *mc_saved_tmp[MAX_UCODE_COUNT];
+	unsigned int count = mc_saved_data->mc_saved_count;
+
+	if (!mc_saved_data->mc_saved) {
+		microcode_pointer(mc_saved_tmp, mc_saved_in_initrd,
+				  initrd_start, count);
+
+		return generic_load_microcode_early(mc_saved_tmp, count, uci);
+	} else {
+#ifdef CONFIG_X86_32
+		microcode_phys(mc_saved_tmp, mc_saved_data);
+		return generic_load_microcode_early(mc_saved_tmp, count, uci);
+#else
+		return generic_load_microcode_early(mc_saved_data->mc_saved,
+						    count, uci);
+#endif
+	}
+}
+
+static u8 get_x86_family(unsigned long sig)
+{
+	u8 x86;
+
+	x86 = (sig >> 8) & 0xf;
+
+	if (x86 == 0xf)
+		x86 += (sig >> 20) & 0xff;
+
+	return x86;
+}
+
+static u8 get_x86_model(unsigned long sig)
+{
+	u8 x86, x86_model;
+
+	x86 = get_x86_family(sig);
+	x86_model = (sig >> 4) & 0xf;
+
+	if (x86 == 0x6 || x86 == 0xf)
+		x86_model += ((sig >> 16) & 0xf) << 4;
+
+	return x86_model;
+}
+
+/*
+ * Given CPU signature and a microcode patch, this function finds if the
+ * microcode patch has matching family and model with the CPU.
+ */
+static enum ucode_state
+matching_model_microcode(struct microcode_header_intel *mc_header,
+			unsigned long sig)
+{
+	u8 x86, x86_model;
+	u8 x86_ucode, x86_model_ucode;
+	struct extended_sigtable *ext_header;
+	unsigned long total_size = get_totalsize(mc_header);
+	unsigned long data_size = get_datasize(mc_header);
+	int ext_sigcount, i;
+	struct extended_signature *ext_sig;
+
+	x86 = get_x86_family(sig);
+	x86_model = get_x86_model(sig);
+
+	x86_ucode = get_x86_family(mc_header->sig);
+	x86_model_ucode = get_x86_model(mc_header->sig);
+
+	if (x86 == x86_ucode && x86_model == x86_model_ucode)
+		return UCODE_OK;
+
+	/* Look for ext. headers: */
+	if (total_size <= data_size + MC_HEADER_SIZE)
+		return UCODE_NFOUND;
+
+	ext_header = (struct extended_sigtable *)
+		     mc_header + data_size + MC_HEADER_SIZE;
+	ext_sigcount = ext_header->count;
+	ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
+
+	for (i = 0; i < ext_sigcount; i++) {
+		x86_ucode = get_x86_family(ext_sig->sig);
+		x86_model_ucode = get_x86_model(ext_sig->sig);
+
+		if (x86 == x86_ucode && x86_model == x86_model_ucode)
+			return UCODE_OK;
+
+		ext_sig++;
+	}
+
+	return UCODE_NFOUND;
+}
+
+static int
+save_microcode(struct mc_saved_data *mc_saved_data,
+	       struct microcode_intel **mc_saved_src,
+	       unsigned int mc_saved_count)
+{
+	int i, j;
+	struct microcode_intel **mc_saved_p;
+	int ret;
+
+	if (!mc_saved_count)
+		return -EINVAL;
+
+	/*
+	 * Copy new microcode data.
+	 */
+	mc_saved_p = kmalloc(mc_saved_count*sizeof(struct microcode_intel *),
+			     GFP_KERNEL);
+	if (!mc_saved_p)
+		return -ENOMEM;
+
+	for (i = 0; i < mc_saved_count; i++) {
+		struct microcode_intel *mc = mc_saved_src[i];
+		struct microcode_header_intel *mc_header = &mc->hdr;
+		unsigned long mc_size = get_totalsize(mc_header);
+		mc_saved_p[i] = kmalloc(mc_size, GFP_KERNEL);
+		if (!mc_saved_p[i]) {
+			ret = -ENOMEM;
+			goto err;
+		}
+		if (!mc_saved_src[i]) {
+			ret = -EINVAL;
+			goto err;
+		}
+		memcpy(mc_saved_p[i], mc, mc_size);
+	}
+
+	/*
+	 * Point to newly saved microcode.
+	 */
+	mc_saved_data->mc_saved = mc_saved_p;
+	mc_saved_data->mc_saved_count = mc_saved_count;
+
+	return 0;
+
+err:
+	for (j = 0; j <= i; j++)
+		kfree(mc_saved_p[j]);
+	kfree(mc_saved_p);
+
+	return ret;
+}
+
+/*
+ * A microcode patch in ucode_ptr is saved into mc_saved
+ * - if it has matching signature and newer revision compared to an existing
+ *   patch mc_saved.
+ * - or if it is a newly discovered microcode patch.
+ *
+ * The microcode patch should have matching model with CPU.
+ */
+static void _save_mc(struct microcode_intel **mc_saved, u8 *ucode_ptr,
+		     unsigned int *mc_saved_count_p)
+{
+	int i;
+	int found = 0;
+	unsigned int mc_saved_count = *mc_saved_count_p;
+	struct microcode_header_intel *mc_header;
+
+	mc_header = (struct microcode_header_intel *)ucode_ptr;
+	for (i = 0; i < mc_saved_count; i++) {
+		unsigned int sig, pf;
+		unsigned int new_rev;
+		struct microcode_header_intel *mc_saved_header =
+			     (struct microcode_header_intel *)mc_saved[i];
+		sig = mc_saved_header->sig;
+		pf = mc_saved_header->pf;
+		new_rev = mc_header->rev;
+
+		if (get_matching_sig(sig, pf, ucode_ptr, new_rev)) {
+			found = 1;
+			if (update_match_revision(mc_header, new_rev)) {
+				/*
+				 * Found an older ucode saved before.
+				 * Replace the older one with this newer
+				 * one.
+				 */
+				mc_saved[i] =
+					(struct microcode_intel *)ucode_ptr;
+				break;
+			}
+		}
+	}
+	if (i >= mc_saved_count && !found)
+		/*
+		 * This ucode is first time discovered in ucode file.
+		 * Save it to memory.
+		 */
+		mc_saved[mc_saved_count++] =
+				 (struct microcode_intel *)ucode_ptr;
+
+	*mc_saved_count_p = mc_saved_count;
+}
+
+/*
+ * Get microcode matching with BSP's model. Only CPUs with the same model as
+ * BSP can stay in the platform.
+ */
+static enum ucode_state __init
+get_matching_model_microcode(int cpu, unsigned long start,
+			     void *data, size_t size,
+			     struct mc_saved_data *mc_saved_data,
+			     unsigned long *mc_saved_in_initrd,
+			     struct ucode_cpu_info *uci)
+{
+	u8 *ucode_ptr = data;
+	unsigned int leftover = size;
+	enum ucode_state state = UCODE_OK;
+	unsigned int mc_size;
+	struct microcode_header_intel *mc_header;
+	struct microcode_intel *mc_saved_tmp[MAX_UCODE_COUNT];
+	unsigned int mc_saved_count = mc_saved_data->mc_saved_count;
+	int i;
+
+	while (leftover) {
+		mc_header = (struct microcode_header_intel *)ucode_ptr;
+
+		mc_size = get_totalsize(mc_header);
+		if (!mc_size || mc_size > leftover ||
+			microcode_sanity_check(ucode_ptr, 0) < 0)
+			break;
+
+		leftover -= mc_size;
+
+		/*
+		 * Since APs with same family and model as the BSP may boot in
+		 * the platform, we need to find and save microcode patches
+		 * with the same family and model as the BSP.
+		 */
+		if (matching_model_microcode(mc_header, uci->cpu_sig.sig) !=
+			 UCODE_OK) {
+			ucode_ptr += mc_size;
+			continue;
+		}
+
+		_save_mc(mc_saved_tmp, ucode_ptr, &mc_saved_count);
+
+		ucode_ptr += mc_size;
+	}
+
+	if (leftover) {
+		state = UCODE_ERROR;
+		goto out;
+	}
+
+	if (mc_saved_count == 0) {
+		state = UCODE_NFOUND;
+		goto out;
+	}
+
+	for (i = 0; i < mc_saved_count; i++)
+		mc_saved_in_initrd[i] = (unsigned long)mc_saved_tmp[i] - start;
+
+	mc_saved_data->mc_saved_count = mc_saved_count;
+out:
+	return state;
+}
+
+#define native_rdmsr(msr, val1, val2)		\
+do {						\
+	u64 __val = native_read_msr((msr));	\
+	(void)((val1) = (u32)__val);		\
+	(void)((val2) = (u32)(__val >> 32));	\
+} while (0)
+
+#define native_wrmsr(msr, low, high)		\
+	native_write_msr(msr, low, high);
+
+static int __cpuinit collect_cpu_info_early(struct ucode_cpu_info *uci)
+{
+	unsigned int val[2];
+	u8 x86, x86_model;
+	struct cpu_signature csig;
+	unsigned int eax, ebx, ecx, edx;
+
+	csig.sig = 0;
+	csig.pf = 0;
+	csig.rev = 0;
+
+	memset(uci, 0, sizeof(*uci));
+
+	eax = 0x00000001;
+	ecx = 0;
+	native_cpuid(&eax, &ebx, &ecx, &edx);
+	csig.sig = eax;
+
+	x86 = get_x86_family(csig.sig);
+	x86_model = get_x86_model(csig.sig);
+
+	if ((x86_model >= 5) || (x86 > 6)) {
+		/* get processor flags from MSR 0x17 */
+		native_rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
+		csig.pf = 1 << ((val[1] >> 18) & 7);
+	}
+	native_wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+
+	/* As documented in the SDM: Do a CPUID 1 here */
+	sync_core();
+
+	/* get the current revision from MSR 0x8B */
+	native_rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
+
+	csig.rev = val[1];
+
+	uci->cpu_sig = csig;
+	uci->valid = 1;
+
+	return 0;
+}
+
+#ifdef DEBUG
+static void __ref show_saved_mc(void)
+{
+	int i, j;
+	unsigned int sig, pf, rev, total_size, data_size, date;
+	struct ucode_cpu_info uci;
+
+	if (mc_saved_data.mc_saved_count == 0) {
+		pr_debug("no micorcode data saved.\n");
+		return;
+	}
+	pr_debug("Total microcode saved: %d\n", mc_saved_data.mc_saved_count);
+
+	collect_cpu_info_early(&uci);
+
+	sig = uci.cpu_sig.sig;
+	pf = uci.cpu_sig.pf;
+	rev = uci.cpu_sig.rev;
+	pr_debug("CPU%d: sig=0x%x, pf=0x%x, rev=0x%x\n",
+		 smp_processor_id(), sig, pf, rev);
+
+	for (i = 0; i < mc_saved_data.mc_saved_count; i++) {
+		struct microcode_header_intel *mc_saved_header;
+		struct extended_sigtable *ext_header;
+		int ext_sigcount;
+		struct extended_signature *ext_sig;
+
+		mc_saved_header = (struct microcode_header_intel *)
+				  mc_saved_data.mc_saved[i];
+		sig = mc_saved_header->sig;
+		pf = mc_saved_header->pf;
+		rev = mc_saved_header->rev;
+		total_size = get_totalsize(mc_saved_header);
+		data_size = get_datasize(mc_saved_header);
+		date = mc_saved_header->date;
+
+		pr_debug("mc_saved[%d]: sig=0x%x, pf=0x%x, rev=0x%x, toal size=0x%x, date = %04x-%02x-%02x\n",
+			 i, sig, pf, rev, total_size,
+			 date & 0xffff,
+			 date >> 24,
+			 (date >> 16) & 0xff);
+
+		/* Look for ext. headers: */
+		if (total_size <= data_size + MC_HEADER_SIZE)
+			continue;
+
+		ext_header = (struct extended_sigtable *)
+			     mc_saved_header + data_size + MC_HEADER_SIZE;
+		ext_sigcount = ext_header->count;
+		ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
+
+		for (j = 0; j < ext_sigcount; j++) {
+			sig = ext_sig->sig;
+			pf = ext_sig->pf;
+
+			pr_debug("\tExtended[%d]: sig=0x%x, pf=0x%x\n",
+				 j, sig, pf);
+
+			ext_sig++;
+		}
+
+	}
+}
+#else
+static inline void show_saved_mc(void)
+{
+}
+#endif
+
+#if defined(CONFIG_MICROCODE_INTEL_EARLY) && defined(CONFIG_HOTPLUG_CPU)
+/*
+ * Save this mc into mc_saved_data. So it will be loaded early when a CPU is
+ * hot added or resumes.
+ *
+ * Please make sure this mc should be a valid microcode patch before calling
+ * this function.
+ */
+int save_mc_for_early(u8 *mc)
+{
+	struct microcode_intel *mc_saved_tmp[MAX_UCODE_COUNT];
+	unsigned int mc_saved_count_init;
+	unsigned int mc_saved_count;
+	struct microcode_intel **mc_saved;
+	int ret = 0;
+	int i;
+
+	/*
+	 * Hold hotplug lock so mc_saved_data is not accessed by a CPU in
+	 * hotplug.
+	 */
+	cpu_hotplug_driver_lock();
+
+	mc_saved_count_init = mc_saved_data.mc_saved_count;
+	mc_saved_count = mc_saved_data.mc_saved_count;
+	mc_saved = mc_saved_data.mc_saved;
+
+	if (mc_saved && mc_saved_count)
+		memcpy(mc_saved_tmp, mc_saved,
+		       mc_saved_count * sizeof(struct mirocode_intel *));
+	/*
+	 * Save the microcode patch mc in mc_save_tmp structure if it's a newer
+	 * version.
+	 */
+
+	_save_mc(mc_saved_tmp, mc, &mc_saved_count);
+
+	/*
+	 * Save the mc_save_tmp in global mc_saved_data.
+	 */
+	ret = save_microcode(&mc_saved_data, mc_saved_tmp, mc_saved_count);
+	if (ret) {
+		pr_err("Can not save microcode patch.\n");
+		goto out;
+	}
+
+	show_saved_mc();
+
+	/*
+	 * Free old saved microcod data.
+	 */
+	if (mc_saved) {
+		for (i = 0; i < mc_saved_count_init; i++)
+			kfree(mc_saved[i]);
+		kfree(mc_saved);
+	}
+
+out:
+	cpu_hotplug_driver_unlock();
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(save_mc_for_early);
+#endif
+
+static __initdata char ucode_name[] = "kernel/x86/microcode/GenuineIntel.bin";
+static __init enum ucode_state
+scan_microcode(unsigned long start, unsigned long end,
+		struct mc_saved_data *mc_saved_data,
+		unsigned long *mc_saved_in_initrd,
+		struct ucode_cpu_info *uci)
+{
+	unsigned int size = end - start + 1;
+	struct cpio_data cd;
+	long offset = 0;
+#ifdef CONFIG_X86_32
+	char *p = (char *)__pa_symbol(ucode_name);
+#else
+	char *p = ucode_name;
+#endif
+
+	cd.data = NULL;
+	cd.size = 0;
+
+	cd = find_cpio_data(p, (void *)start, size, &offset);
+	if (!cd.data)
+		return UCODE_ERROR;
+
+
+	return get_matching_model_microcode(0, start, cd.data, cd.size,
+					    mc_saved_data, mc_saved_in_initrd,
+					    uci);
+}
+
+/*
+ * Print ucode update info.
+ */
+static void __cpuinit
+print_ucode_info(struct ucode_cpu_info *uci, unsigned int date)
+{
+	int cpu = smp_processor_id();
+
+	pr_info("CPU%d microcode updated early to revision 0x%x, date = %04x-%02x-%02x\n",
+		cpu,
+		uci->cpu_sig.rev,
+		date & 0xffff,
+		date >> 24,
+		(date >> 16) & 0xff);
+}
+
+#ifdef CONFIG_X86_32
+
+static int delay_ucode_info;
+static int current_mc_date;
+
+/*
+ * Print early updated ucode info after printk works. This is delayed info dump.
+ */
+void __cpuinit show_ucode_info_early(void)
+{
+	struct ucode_cpu_info uci;
+
+	if (delay_ucode_info) {
+		collect_cpu_info_early(&uci);
+		print_ucode_info(&uci, current_mc_date);
+		delay_ucode_info = 0;
+	}
+}
+
+/*
+ * At this point, we can not call printk() yet. Keep microcode patch number in
+ * mc_saved_data.mc_saved and delay printing microcode info in
+ * show_ucode_info_early() until printk() works.
+ */
+static void __cpuinit print_ucode(struct ucode_cpu_info *uci)
+{
+	struct microcode_intel *mc_intel;
+	int *delay_ucode_info_p;
+	int *current_mc_date_p;
+
+	mc_intel = uci->mc;
+	if (mc_intel == NULL)
+		return;
+
+	delay_ucode_info_p = (int *)__pa_symbol(&delay_ucode_info);
+	current_mc_date_p = (int *)__pa_symbol(&current_mc_date);
+
+	*delay_ucode_info_p = 1;
+	*current_mc_date_p = mc_intel->hdr.date;
+}
+#else
+
+/*
+ * Flush global tlb. We only do this in x86_64 where paging has been enabled
+ * already and PGE should be enabled as well.
+ */
+static inline void __cpuinit flush_tlb_early(void)
+{
+	__native_flush_tlb_global_irq_disabled();
+}
+
+static inline void __cpuinit print_ucode(struct ucode_cpu_info *uci)
+{
+	struct microcode_intel *mc_intel;
+
+	mc_intel = uci->mc;
+	if (mc_intel == NULL)
+		return;
+
+	print_ucode_info(uci, mc_intel->hdr.date);
+}
+#endif
+
+static int apply_microcode_early(struct mc_saved_data *mc_saved_data,
+				 struct ucode_cpu_info *uci)
+{
+	struct microcode_intel *mc_intel;
+	unsigned int val[2];
+
+	mc_intel = uci->mc;
+	if (mc_intel == NULL)
+		return 0;
+
+	/* write microcode via MSR 0x79 */
+	native_wrmsr(MSR_IA32_UCODE_WRITE,
+	      (unsigned long) mc_intel->bits,
+	      (unsigned long) mc_intel->bits >> 16 >> 16);
+	native_wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+
+	/* As documented in the SDM: Do a CPUID 1 here */
+	sync_core();
+
+	/* get the current revision from MSR 0x8B */
+	native_rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
+	if (val[1] != mc_intel->hdr.rev)
+		return -1;
+
+#ifdef CONFIG_X86_64
+	/* Flush global tlb. This is precaution. */
+	flush_tlb_early();
+#endif
+	uci->cpu_sig.rev = val[1];
+
+	print_ucode(uci);
+
+	return 0;
+}
+
+/*
+ * This function converts microcode patch offsets previously stored in
+ * mc_saved_in_initrd to pointers and stores the pointers in mc_saved_data.
+ */
+int __init save_microcode_in_initrd(void)
+{
+	unsigned int count = mc_saved_data.mc_saved_count;
+	struct microcode_intel *mc_saved[MAX_UCODE_COUNT];
+	int ret = 0;
+
+	if (count == 0)
+		return ret;
+
+	microcode_pointer(mc_saved, mc_saved_in_initrd, initrd_start, count);
+	ret = save_microcode(&mc_saved_data, mc_saved, count);
+	if (ret)
+		pr_err("Can not save microcod patches from initrd");
+
+	show_saved_mc();
+
+	return ret;
+}
+
+static void __init
+_load_ucode_intel_bsp(struct mc_saved_data *mc_saved_data,
+		      unsigned long *mc_saved_in_initrd,
+		      unsigned long initrd_start_early,
+		      unsigned long initrd_end_early,
+		      struct ucode_cpu_info *uci)
+{
+	collect_cpu_info_early(uci);
+	scan_microcode(initrd_start_early, initrd_end_early, mc_saved_data,
+		       mc_saved_in_initrd, uci);
+	load_microcode(mc_saved_data, mc_saved_in_initrd,
+		       initrd_start_early, uci);
+	apply_microcode_early(mc_saved_data, uci);
+}
+
+void __init
+load_ucode_intel_bsp(void)
+{
+	u64 ramdisk_image, ramdisk_size;
+	unsigned long initrd_start_early, initrd_end_early;
+	struct ucode_cpu_info uci;
+#ifdef CONFIG_X86_32
+	struct boot_params *boot_params_p;
+
+	boot_params_p = (struct boot_params *)__pa_symbol(&boot_params);
+	ramdisk_image = boot_params_p->hdr.ramdisk_image;
+	ramdisk_size  = boot_params_p->hdr.ramdisk_size;
+	initrd_start_early = ramdisk_image;
+	initrd_end_early = initrd_start_early + ramdisk_size;
+
+	_load_ucode_intel_bsp(
+		(struct mc_saved_data *)__pa_symbol(&mc_saved_data),
+		(unsigned long *)__pa_symbol(&mc_saved_in_initrd),
+		initrd_start_early, initrd_end_early, &uci);
+#else
+	ramdisk_image = boot_params.hdr.ramdisk_image;
+	ramdisk_size  = boot_params.hdr.ramdisk_size;
+	initrd_start_early = ramdisk_image + PAGE_OFFSET;
+	initrd_end_early = initrd_start_early + ramdisk_size;
+
+	_load_ucode_intel_bsp(&mc_saved_data, mc_saved_in_initrd,
+			      initrd_start_early, initrd_end_early, &uci);
+#endif
+}
+
+void __cpuinit load_ucode_intel_ap(void)
+{
+	struct mc_saved_data *mc_saved_data_p;
+	struct ucode_cpu_info uci;
+	unsigned long *mc_saved_in_initrd_p;
+	unsigned long initrd_start_addr;
+#ifdef CONFIG_X86_32
+	unsigned long *initrd_start_p;
+
+	mc_saved_in_initrd_p =
+		(unsigned long *)__pa_symbol(mc_saved_in_initrd);
+	mc_saved_data_p = (struct mc_saved_data *)__pa_symbol(&mc_saved_data);
+	initrd_start_p = (unsigned long *)__pa_symbol(&initrd_start);
+	initrd_start_addr = (unsigned long)__pa_symbol(*initrd_start_p);
+#else
+	mc_saved_data_p = &mc_saved_data;
+	mc_saved_in_initrd_p = mc_saved_in_initrd;
+	initrd_start_addr = initrd_start;
+#endif
+
+	/*
+	 * If there is no valid ucode previously saved in memory, no need to
+	 * update ucode on this AP.
+	 */
+	if (mc_saved_data_p->mc_saved_count == 0)
+		return;
+
+	collect_cpu_info_early(&uci);
+	load_microcode(mc_saved_data_p, mc_saved_in_initrd_p,
+		       initrd_start_addr, &uci);
+	apply_microcode_early(mc_saved_data_p, &uci);
+}

[PATCH v5 09/12] x86/head_32.S: Early update ucode in 32-bit

[Fenghua Yu]

From: Fenghua Yu <fenghua.yu@intel.com>

This updates ucode in 32-bit kernel on BSP and AP. At this point, there is no
paging and no virtual address yet.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/x86/kernel/head_32.S | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 8e7f655..2f70530 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -144,6 +144,11 @@ ENTRY(startup_32)
 	movl %eax, pa(olpc_ofw_pgd)
 #endif
 
+#ifdef CONFIG_MICROCODE_EARLY
+	/* Early load ucode on BSP. */
+	call load_ucode_bsp
+#endif
+
 /*
  * Initialize page tables.  This creates a PDE and a set of page
  * tables, which are located immediately beyond __brk_base.  The variable
@@ -299,6 +304,12 @@ ENTRY(startup_32_smp)
 	movl %eax,%ss
 	leal -__PAGE_OFFSET(%ecx),%esp
 
+#ifdef CONFIG_MICROCODE_EARLY
+	/* Early load ucode on AP. */
+	call load_ucode_ap
+#endif
+
+
 default_entry:
 /*
  *	New page tables may be in 4Mbyte page mode and may
-- 
1.8.0.1

[tip:x86/microcode] x86/head_32.S: Early update ucode in 32-bit

[tip-bot for Fenghua Yu]

Commit-ID:  63b553c68db5a8d4febcd1010b194333d2b02e1c
Gitweb:     http://git.kernel.org/tip/63b553c68db5a8d4febcd1010b194333d2b02e1c
Author:     Fenghua Yu <fenghua.yu@intel.com>
AuthorDate: Thu, 20 Dec 2012 23:44:29 -0800
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 31 Jan 2013 13:19:20 -0800

x86/head_32.S: Early update ucode in 32-bit

This updates ucode in 32-bit kernel on BSP and AP. At this point, there is no
paging and no virtual address yet.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1356075872-3054-10-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/head_32.S | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 8e7f655..2f70530 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -144,6 +144,11 @@ ENTRY(startup_32)
 	movl %eax, pa(olpc_ofw_pgd)
 #endif
 
+#ifdef CONFIG_MICROCODE_EARLY
+	/* Early load ucode on BSP. */
+	call load_ucode_bsp
+#endif
+
 /*
  * Initialize page tables.  This creates a PDE and a set of page
  * tables, which are located immediately beyond __brk_base.  The variable
@@ -299,6 +304,12 @@ ENTRY(startup_32_smp)
 	movl %eax,%ss
 	leal -__PAGE_OFFSET(%ecx),%esp
 
+#ifdef CONFIG_MICROCODE_EARLY
+	/* Early load ucode on AP. */
+	call load_ucode_ap
+#endif
+
+
 default_entry:
 /*
  *	New page tables may be in 4Mbyte page mode and may

[PATCH v5 10/12] x86/head64.c: Early update ucode in 64-bit

[Fenghua Yu]

From: Fenghua Yu <fenghua.yu@intel.com>

This updates ucode on BSP in 64-bit mode. Paging and virtual address are
working now.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/x86/kernel/head64.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index e1cb611..5a97fcc 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -26,6 +26,7 @@
 #include <asm/kdebug.h>
 #include <asm/e820.h>
 #include <asm/bios_ebda.h>
+#include <asm/microcode.h>
 
 /*
  * Manage page tables very early on.
@@ -181,6 +182,11 @@ void __init x86_64_start_kernel(char * real_mode_data)
 
 	copy_bootdata(__va(real_mode_data));
 
+	/*
+	 * Load microcode early on BSP.
+	 */
+	load_ucode_bsp();
+
 	if (console_loglevel == 10)
 		early_printk("Kernel alive\n");
 
-- 
1.8.0.1

[tip:x86/microcode] x86/head64.c: Early update ucode in 64-bit

[tip-bot for Fenghua Yu]

Commit-ID:  feddc9de8bf69415da6f96eca0219186b70d145a
Gitweb:     http://git.kernel.org/tip/feddc9de8bf69415da6f96eca0219186b70d145a
Author:     Fenghua Yu <fenghua.yu@intel.com>
AuthorDate: Thu, 20 Dec 2012 23:44:30 -0800
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 31 Jan 2013 13:20:24 -0800

x86/head64.c: Early update ucode in 64-bit

This updates ucode on BSP in 64-bit mode. Paging and virtual address are
working now.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1356075872-3054-11-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/head64.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 57334f4..3ff3570 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -26,6 +26,7 @@
 #include <asm/e820.h>
 #include <asm/bios_ebda.h>
 #include <asm/bootparam_utils.h>
+#include <asm/microcode.h>
 
 /*
  * Manage page tables very early on.
@@ -170,6 +171,11 @@ void __init x86_64_start_kernel(char * real_mode_data)
 
 	copy_bootdata(__va(real_mode_data));
 
+	/*
+	 * Load microcode early on BSP.
+	 */
+	load_ucode_bsp();
+
 	if (console_loglevel == 10)
 		early_printk("Kernel alive\n");
 

[PATCH v5 11/12] x86/mm/init.c: Copy ucode from initrd image to kernel memory

[Fenghua Yu]

From: Fenghua Yu <fenghua.yu@intel.com>

Before initrd image is freed, copy valid ucode patches from initrd image
to kernel memory. The saved ucode will be used to update AP in resume
or hotplug.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/x86/mm/init.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 5f59473..36bad16 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -16,6 +16,7 @@
 #include <asm/tlb.h>
 #include <asm/proto.h>
 #include <asm/dma.h>		/* for MAX_DMA_PFN */
+#include <asm/microcode.h>
 
 #include "mm_internal.h"
 
@@ -555,6 +556,15 @@ void free_initmem(void)
 #ifdef CONFIG_BLK_DEV_INITRD
 void __init free_initrd_mem(unsigned long start, unsigned long end)
 {
+#ifdef CONFIG_MICROCODE_EARLY
+	/*
+	 * Remember, initrd memory may contain microcode or other useful things.
+	 * Before we lose initrd mem, we need to find a place to hold them
+	 * now that normal virtual memory is enabled.
+	 */
+	save_microcode_in_initrd();
+#endif
+
 	/*
 	 * end could be not aligned, and We can not align that,
 	 * decompresser could be confused by aligned initrd_end
-- 
1.8.0.1

[tip:x86/microcode] x86/mm/init.c: Copy ucode from initrd image to kernel memory

[tip-bot for Fenghua Yu]

Commit-ID:  cd745be89e1580e8a1b47454a39f97f9c5c4b1e0
Gitweb:     http://git.kernel.org/tip/cd745be89e1580e8a1b47454a39f97f9c5c4b1e0
Author:     Fenghua Yu <fenghua.yu@intel.com>
AuthorDate: Thu, 20 Dec 2012 23:44:31 -0800
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 31 Jan 2013 13:20:26 -0800

x86/mm/init.c: Copy ucode from initrd image to kernel memory

Before initrd image is freed, copy valid ucode patches from initrd image
to kernel memory. The saved ucode will be used to update AP in resume
or hotplug.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1356075872-3054-12-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/mm/init.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index d418152..4903a03 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -16,6 +16,7 @@
 #include <asm/tlb.h>
 #include <asm/proto.h>
 #include <asm/dma.h>		/* for MAX_DMA_PFN */
+#include <asm/microcode.h>
 
 #include "mm_internal.h"
 
@@ -534,6 +535,15 @@ void free_initmem(void)
 #ifdef CONFIG_BLK_DEV_INITRD
 void __init free_initrd_mem(unsigned long start, unsigned long end)
 {
+#ifdef CONFIG_MICROCODE_EARLY
+	/*
+	 * Remember, initrd memory may contain microcode or other useful things.
+	 * Before we lose initrd mem, we need to find a place to hold them
+	 * now that normal virtual memory is enabled.
+	 */
+	save_microcode_in_initrd();
+#endif
+
 	/*
 	 * end could be not aligned, and We can not align that,
 	 * decompresser could be confused by aligned initrd_end

[PATCH v5 12/12] x86/Kconfig: Configurations to enable/disable the feature

[Fenghua Yu]

From: Fenghua Yu <fenghua.yu@intel.com>

MICROCODE_INTEL_LIB, MICROCODE_INTEL_EARLY, and MICROCODE_EARLY are three new
configurations to enable or disable the feature.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/x86/Kconfig | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 97f8c5a..7f63084 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1030,6 +1030,24 @@ config MICROCODE_OLD_INTERFACE
 	def_bool y
 	depends on MICROCODE
 
+config MICROCODE_INTEL_LIB
+	def_bool y
+	depends on MICROCODE_INTEL
+
+config MICROCODE_INTEL_EARLY
+	bool "Early load microcode"
+	depends on MICROCODE_INTEL && BLK_DEV_INITRD
+	default y
+	help
+	  This option provides functionality to read additional microcode data
+	  at the beginning of initrd image. The data tells kernel to load
+	  microcode to CPU's as early as possible. No functional change if no
+	  microcode data is glued to the initrd, therefore it's safe to say Y.
+
+config MICROCODE_EARLY
+	def_bool y
+	depends on MICROCODE_INTEL_EARLY
+
 config X86_MSR
 	tristate "/dev/cpu/*/msr - Model-specific register support"
 	---help---
-- 
1.8.0.1

[tip:x86/microcode] x86/Kconfig: Make early microcode loading a configuration feature

[tip-bot for Fenghua Yu]

Commit-ID:  da76f64e7eb28b718501d15c1b79af560b7ca4ea
Gitweb:     http://git.kernel.org/tip/da76f64e7eb28b718501d15c1b79af560b7ca4ea
Author:     Fenghua Yu <fenghua.yu@intel.com>
AuthorDate: Thu, 20 Dec 2012 23:44:32 -0800
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 31 Jan 2013 13:20:42 -0800

x86/Kconfig: Make early microcode loading a configuration feature

MICROCODE_INTEL_LIB, MICROCODE_INTEL_EARLY, and MICROCODE_EARLY are three new
configurations to enable or disable the feature.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1356075872-3054-13-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/Kconfig | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 79795af..e243da7 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1029,6 +1029,24 @@ config MICROCODE_OLD_INTERFACE
 	def_bool y
 	depends on MICROCODE
 
+config MICROCODE_INTEL_LIB
+	def_bool y
+	depends on MICROCODE_INTEL
+
+config MICROCODE_INTEL_EARLY
+	bool "Early load microcode"
+	depends on MICROCODE_INTEL && BLK_DEV_INITRD
+	default y
+	help
+	  This option provides functionality to read additional microcode data
+	  at the beginning of initrd image. The data tells kernel to load
+	  microcode to CPU's as early as possible. No functional change if no
+	  microcode data is glued to the initrd, therefore it's safe to say Y.
+
+config MICROCODE_EARLY
+	def_bool y
+	depends on MICROCODE_INTEL_EARLY
+
 config X86_MSR
 	tristate "/dev/cpu/*/msr - Model-specific register support"
 	---help---

Re: [PATCH v5 00/12] x86/microcode: Early load microcode

[Konrad Rzeszutek Wilk]

On Thu, Dec 20, 2012 at 11:44:20PM -0800, Fenghua Yu wrote:
> From: Fenghua Yu <fenghua.yu@intel.com>
> 
> The problem in current microcode loading method is that we load a microcode way,
> way too late; ideally we should load it before turning paging on.  This may only
> be practical on 32 bits since we can't get to 64-bit mode without paging on,
> but we should still do it as early as at all possible.
> 
> Similarly, we should load the microcode update as early as possible during AP
> bringup and when processors are brought back online after hotplug or S3/S4.
> 
> In order to do that, the microcode patch needs to be permanently present in
> kernel memory.  Each individual patch is fairly small, so that is OK, but the
> entire blob with support for each CPU is too big. Since only CPU's with same
> model can be in the same platform, we store microcode with the same model as
> BSP. Later on APs can upload microcode from the saved microcodep patches.
> 
> Note, however, that Linux users have gotten used to being able to install a
> microcode patch in the field without having a reboot; we support that model too.
> 
> In x86_64, this patchset needs early #PF handler set page table patchset. So
> this patchset is based on:
> git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git for-x86-boot
> 

A couple of questions - why the usage of native_[read|write]_msr? I get the
__native_cpuid variant, but I am not sure I understand why you are using
the native_* variants. Especially as this code ends up being called on
Xen and lguest (at least on 64-bit) and probably should go through the
paravirt interfaces.

Also the same question for the __native_flush_tlb_global_irq_disabled
- you take parts of it out (the ones dealing with CR4) and end up
calling those directly? Should they perhaps go through the paravirt
interface?

> v5: Call 64 bit load_ucode_bsp() after copy_bootdata() and remove its
> parameter.
> 
> v4: Change CPUID_IS macro. Call load_ucode_bsp after load_idt in x86_64. Flush
> tlb after applying microcode.
> 
> v3: Change .hex to .bin in 01/10 and 05/10 patches. Fix some compilation
> warnings. In x86_32 mode, access global varialbes by __pa_symobl() and fix
> static string issue in x86_vendor(). Call load_ucode_ap() in real mode as well.
> Add debug info.
> 
> v2: Detect vendor before loading microcode. Move some functions from
> microcode_intel_early.c to microcode_intel_lib.c. Change some early loading
> microcode dependencies in Kconfig. Reword doc.
> 
> Fenghua Yu (12):
>   Documentation/x86: Early load microcode
>   x86/microcode_intel.h: Define functions and macros for early loading
>     ucode
>   x86/common.c: Make have_cpuid_p() a global function
>   x86/common.c: load ucode in 64 bit or show loading ucode info in 32
>     bit on AP
>   x86/microcode_core_early.c: Define interfaces for early loading ucode
>   x86/microcode_intel_lib.c: Early update ucode on Intel's CPU
>   x86/tlbflush.h: Define __native_flush_tlb_global_irq_disabled()
>   x86/microcode_intel_early.c: Early update ucode on Intel's CPU
>   x86/head_32.S: Early update ucode in 32-bit
>   x86/head64.c: Early update ucode in 64-bit
>   x86/mm/init.c: Copy ucode from initrd image to kernel memory
>   x86/Kconfig: Configurations to enable/disable the feature
> 
>  Documentation/x86/early-microcode.txt   |  43 ++
>  arch/x86/Kconfig                        |  18 +
>  arch/x86/include/asm/microcode.h        |  14 +
>  arch/x86/include/asm/microcode_intel.h  |  85 ++++
>  arch/x86/include/asm/processor.h        |   8 +
>  arch/x86/include/asm/tlbflush.h         |  18 +-
>  arch/x86/kernel/Makefile                |   3 +
>  arch/x86/kernel/cpu/common.c            |  17 +-
>  arch/x86/kernel/head64.c                |   6 +
>  arch/x86/kernel/head_32.S               |  11 +
>  arch/x86/kernel/microcode_core.c        |   7 +-
>  arch/x86/kernel/microcode_core_early.c  |  76 +++
>  arch/x86/kernel/microcode_intel.c       | 198 ++------
>  arch/x86/kernel/microcode_intel_early.c | 796 ++++++++++++++++++++++++++++++++
>  arch/x86/kernel/microcode_intel_lib.c   | 174 +++++++
>  arch/x86/mm/init.c                      |  10 +
>  16 files changed, 1301 insertions(+), 183 deletions(-)
>  create mode 100644 Documentation/x86/early-microcode.txt
>  create mode 100644 arch/x86/include/asm/microcode_intel.h
>  create mode 100644 arch/x86/kernel/microcode_core_early.c
>  create mode 100644 arch/x86/kernel/microcode_intel_early.c
>  create mode 100644 arch/x86/kernel/microcode_intel_lib.c
> 
> -- 
> 1.8.0.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 

Re: [PATCH v5 00/12] x86/microcode: Early load microcode

[H. Peter Anvin]

On 01/03/2013 09:44 AM, Konrad Rzeszutek Wilk wrote:
>
> A couple of questions - why the usage of native_[read|write]_msr? I get the
> __native_cpuid variant, but I am not sure I understand why you are using
> the native_* variants. Especially as this code ends up being called on
> Xen and lguest (at least on 64-bit) and probably should go through the
> paravirt interfaces.
>

For Xen, the early microcode update should be done in the hypervisor launch.

However, if you have a more specific flow in mind please clarify.  Keep 
in mind Xen is largely a black box to non-Xen developers
(#include <stdrant.h>).

	-hpa

P.S. Since when is lguest 64-bit?  Did I miss something?

-- 
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel.  I don't speak on their behalf.

Re: [PATCH v5 00/12] x86/microcode: Early load microcode

[Konrad Rzeszutek Wilk]

On Thu, Jan 03, 2013 at 09:48:43AM -0800, H. Peter Anvin wrote:
> On 01/03/2013 09:44 AM, Konrad Rzeszutek Wilk wrote:
> >
> >A couple of questions - why the usage of native_[read|write]_msr? I get the
> >__native_cpuid variant, but I am not sure I understand why you are using
> >the native_* variants. Especially as this code ends up being called on
> >Xen and lguest (at least on 64-bit) and probably should go through the
> >paravirt interfaces.
> >
> 
> For Xen, the early microcode update should be done in the hypervisor launch.

Right. That is the plan.
> 
> However, if you have a more specific flow in mind please clarify.

> Keep in mind Xen is largely a black box to non-Xen developers
> (#include <stdrant.h>).

OK. I am trying to figure out whether this usage of native_* for the
MSRs was done on purpose - and it sounds like the answer is no. If so -
can it be done using the normal 'safe_rdmsr' and 'wrmsr'?

That would allow at least in the case of Xen, to omit a whole bunch
of MSR writes/reads during the boot that are not neccessary as we would
not trap in the hypervisor - but could use the pvops version of
read/write MSR calls to just do a nop.

> 
> 	-hpa
> 
> P.S. Since when is lguest 64-bit?  Did I miss something?

Oh, I assumed it could do it.
> 
> -- 
> H. Peter Anvin, Intel Open Source Technology Center
> I work for Intel.  I don't speak on their behalf.
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 

Re: [PATCH v5 00/12] x86/microcode: Early load microcode

[H. Peter Anvin]

On 01/08/2013 11:46 AM, Konrad Rzeszutek Wilk wrote:
> 
> OK. I am trying to figure out whether this usage of native_* for the
> MSRs was done on purpose - and it sounds like the answer is no. If so -
> can it be done using the normal 'safe_rdmsr' and 'wrmsr'?
> 
> That would allow at least in the case of Xen, to omit a whole bunch
> of MSR writes/reads during the boot that are not neccessary as we would
> not trap in the hypervisor - but could use the pvops version of
> read/write MSR calls to just do a nop.
> 

Why is this code invoked on Xen at all?  That seems crazy.

	-hpa

Re: [PATCH v5 00/12] x86/microcode: Early load microcode

[Konrad Rzeszutek Wilk]

On Tue, Jan 08, 2013 at 11:47:39AM -0800, H. Peter Anvin wrote:
> On 01/08/2013 11:46 AM, Konrad Rzeszutek Wilk wrote:
> > 
> > OK. I am trying to figure out whether this usage of native_* for the
> > MSRs was done on purpose - and it sounds like the answer is no. If so -
> > can it be done using the normal 'safe_rdmsr' and 'wrmsr'?
> > 
> > That would allow at least in the case of Xen, to omit a whole bunch
> > of MSR writes/reads during the boot that are not neccessary as we would
> > not trap in the hypervisor - but could use the pvops version of
> > read/write MSR calls to just do a nop.
> > 
> 
> Why is this code invoked on Xen at all?  That seems crazy.

 [PATCH v4 09/11] x86/head64.c: Early update ucode in 64-bit

has this in x86_64_start_kernel:

..
        load_idt((const struct desc_ptr *)&idt_descr);

+       /*
+        * Load microcode early on BSP.
+        */
+       load_ucode_bsp(__va(real_mode_data));
+
        copy_bootdata(__va(real_mode_data));

Which gets called after xen_start_kernel has setup pagetables,
bootparams, etc ready for the generic code to be invoked.

Or am I looking at an old version of these patches.
> 
> 	-hpa
> 
> 

Re: [PATCH v5 00/12] x86/microcode: Early load microcode

[H. Peter Anvin]

On 01/08/2013 12:04 PM, Konrad Rzeszutek Wilk wrote:
>>
>> Why is this code invoked on Xen at all?  That seems crazy.
> 
>  [PATCH v4 09/11] x86/head64.c: Early update ucode in 64-bit
> 
> has this in x86_64_start_kernel:
> 
> ..
>         load_idt((const struct desc_ptr *)&idt_descr);
> 
> +       /*
> +        * Load microcode early on BSP.
> +        */
> +       load_ucode_bsp(__va(real_mode_data));
> +
>         copy_bootdata(__va(real_mode_data));
> 
> Which gets called after xen_start_kernel has setup pagetables,
> bootparams, etc ready for the generic code to be invoked.
> 
> Or am I looking at an old version of these patches.

We really shouldn't do that in that flow.  This doesn't make sense on
non-native.

	-hpa

Re: [PATCH v5 00/12] x86/microcode: Early load microcode

[Konrad Rzeszutek Wilk]

On Tue, Jan 08, 2013 at 03:04:33PM -0500, Konrad Rzeszutek Wilk wrote:
> On Tue, Jan 08, 2013 at 11:47:39AM -0800, H. Peter Anvin wrote:
> > On 01/08/2013 11:46 AM, Konrad Rzeszutek Wilk wrote:
> > > 
> > > OK. I am trying to figure out whether this usage of native_* for the
> > > MSRs was done on purpose - and it sounds like the answer is no. If so -
> > > can it be done using the normal 'safe_rdmsr' and 'wrmsr'?
> > > 
> > > That would allow at least in the case of Xen, to omit a whole bunch
> > > of MSR writes/reads during the boot that are not neccessary as we would
> > > not trap in the hypervisor - but could use the pvops version of
> > > read/write MSR calls to just do a nop.
> > > 
> > 
> > Why is this code invoked on Xen at all?  That seems crazy.
> 
>  [PATCH v4 09/11] x86/head64.c: Early update ucode in 64-bit
> 
> has this in x86_64_start_kernel:
> 
> ..
>         load_idt((const struct desc_ptr *)&idt_descr);
> 
> +       /*
> +        * Load microcode early on BSP.
> +        */
> +       load_ucode_bsp(__va(real_mode_data));
> +
>         copy_bootdata(__va(real_mode_data));
> 
> Which gets called after xen_start_kernel has setup pagetables,
> bootparams, etc ready for the generic code to be invoked.

And I am looking at the wrong code. The "x86_64_start_kernel" is
absolutly fine. It is "x86_64_start_reservations" that is invoked by Xen.

I got thrown off by the "copy_bootdata(.." which on v3.7 is in
"x86_64_start_reservations".

Duh!
> 
> Or am I looking at an old version of these patches.
> > 
> > 	-hpa
> > 
> > 

[tip: x86/microcode] x86/microcode/32: Move early loading after paging enable

[tip-bot2 for Thomas Gleixner]

The following commit has been merged into the x86/microcode branch of tip:

Commit-ID:     3f320038de388fac90a402625cabd613c2797557
Gitweb:        https://git.kernel.org/tip/3f320038de388fac90a402625cabd613c2797557
Author:        Thomas Gleixner <tglx@linutronix.de>
AuthorDate:    Mon, 02 Oct 2023 13:59:35 +02:00
Committer:     Borislav Petkov (AMD) <bp@alien8.de>
CommitterDate: Mon, 02 Oct 2023 17:06:16 +02:00

x86/microcode/32: Move early loading after paging enable

32-bit loads microcode before paging is enabled. The commit which
introduced that has zero justification in the changelog. The cover letter
has slightly more content, but it does not give any technical justification
either:

  "The problem in current microcode loading method is that we load a
   microcode way, way too late; ideally we should load it before turning
   paging on.  This may only be practical on 32 bits since we can't get to
   64-bit mode without paging on, but we should still do it as early as at
   all possible."

Handwaving word salad with zero technical content.

Someone claimed in an offlist conversation that this is required for curing
the ATOM erratum AAE44/AAF40/AAG38/AAH41. That erratum requires an
microcode update in order to make the usage of PSE safe. But during early
boot PSE is completely irrelevant and it is evaluated way later.

Neither is it relevant for the AP on single core HT enabled CPUs as the
microcode loading on the AP is not doing anything.

On dual core CPUs there is a theoretical problem if a split of an
executable large page between enabling paging including PSE and loading the
microcode happens. But that's only theoretical, it's practically irrelevant
because the affected dual core CPUs are 64bit enabled and therefore have
paging and PSE enabled before loading the microcode on the second core. So
why would it work on 64-bit but not on 32-bit?

The erratum:

  "AAG38 Code Fetch May Occur to Incorrect Address After a Large Page is
   Split Into 4-Kbyte Pages

   Problem: If software clears the PS (page size) bit in a present PDE
   (page directory entry), that will cause linear addresses mapped through
   this PDE to use 4-KByte pages instead of using a large page after old
   TLB entries are invalidated. Due to this erratum, if a code fetch uses
   this PDE before the TLB entry for the large page is invalidated then it
   may fetch from a different physical address than specified by either the
   old large page translation or the new 4-KByte page translation. This
   erratum may also cause speculative code fetches from incorrect addresses."

The practical relevance for this is exactly zero because there is no
splitting of large text pages during early boot-time, i.e. between paging
enable and microcode loading, and neither during CPU hotplug.

IOW, this load microcode before paging enable is yet another voodoo
programming solution in search of a problem. What's worse is that it causes
at least two serious problems:

 1) When stackprotector is enabled then the microcode loader code has the
    stackprotector mechanics enabled. The read from the per CPU variable
    __stack_chk_guard is always accessing the virtual address either
    directly on UP or via FS on SMP. In physical address mode this results
    in an access to memory above 3GB. So this works by chance as the
    hardware returns the same value when there is no RAM at this physical
    address. When there is RAM populated above 3G then the read is by
    chance the same as nothing changes that memory during the very early
    boot stage. That's not necessarily true during runtime CPU hotplug.

 2) When function tracing is enabled, then the relevant microcode loader
    functions and the functions invoked from there will call into the
    tracing code and evaluate global and per CPU variables in physical
    address mode. What could potentially go wrong?

Cure this and move the microcode loading after the early paging enable and
remove the gunk in the microcode loader which is required to handle
physical address mode.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/lkml/1356075872-3054-1-git-send-email-fenghua.yu@intel.com
Link: https://lore.kernel.org/r/20231002115902.096543357@linutronix.de
---
 arch/x86/include/asm/microcode.h         |   5 +-
 arch/x86/kernel/cpu/common.c             |  12 +--
 arch/x86/kernel/cpu/microcode/amd.c      | 103 ++++++--------------
 arch/x86/kernel/cpu/microcode/core.c     |  73 ++------------
 arch/x86/kernel/cpu/microcode/intel.c    | 116 +++-------------------
 arch/x86/kernel/cpu/microcode/internal.h |   2 +-
 arch/x86/kernel/head32.c                 |   3 +-
 arch/x86/kernel/head_32.S                |  10 +--
 arch/x86/kernel/smpboot.c                |  12 +--
 9 files changed, 71 insertions(+), 265 deletions(-)

diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
index bbbe9d7..65ac490 100644
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -68,11 +68,6 @@ static inline u32 intel_get_microcode_revision(void)
 
 	return rev;
 }
-
-void show_ucode_info_early(void);
-
-#else /* CONFIG_CPU_SUP_INTEL */
-static inline void show_ucode_info_early(void) { }
 #endif /* !CONFIG_CPU_SUP_INTEL */
 
 #endif /* _ASM_X86_MICROCODE_H */
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 4e5ffc8..bd631f1 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -2166,8 +2166,6 @@ static inline void setup_getcpu(int cpu)
 }
 
 #ifdef CONFIG_X86_64
-static inline void ucode_cpu_init(int cpu) { }
-
 static inline void tss_setup_ist(struct tss_struct *tss)
 {
 	/* Set up the per-CPU TSS IST stacks */
@@ -2178,16 +2176,8 @@ static inline void tss_setup_ist(struct tss_struct *tss)
 	/* Only mapped when SEV-ES is active */
 	tss->x86_tss.ist[IST_INDEX_VC] = __this_cpu_ist_top_va(VC);
 }
-
 #else /* CONFIG_X86_64 */
-
-static inline void ucode_cpu_init(int cpu)
-{
-	show_ucode_info_early();
-}
-
 static inline void tss_setup_ist(struct tss_struct *tss) { }
-
 #endif /* !CONFIG_X86_64 */
 
 static inline void tss_setup_io_bitmap(struct tss_struct *tss)
@@ -2243,8 +2233,6 @@ void cpu_init(void)
 	struct task_struct *cur = current;
 	int cpu = raw_smp_processor_id();
 
-	ucode_cpu_init(cpu);
-
 #ifdef CONFIG_NUMA
 	if (this_cpu_read(numa_node) == 0 &&
 	    early_cpu_to_node(cpu) != NUMA_NO_NODE)
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index bbd1dc3..ccca39f 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -121,24 +121,20 @@ static u16 find_equiv_id(struct equiv_cpu_table *et, u32 sig)
 
 /*
  * Check whether there is a valid microcode container file at the beginning
- * of @buf of size @buf_size. Set @early to use this function in the early path.
+ * of @buf of size @buf_size.
  */
-static bool verify_container(const u8 *buf, size_t buf_size, bool early)
+static bool verify_container(const u8 *buf, size_t buf_size)
 {
 	u32 cont_magic;
 
 	if (buf_size <= CONTAINER_HDR_SZ) {
-		if (!early)
-			pr_debug("Truncated microcode container header.\n");
-
+		pr_debug("Truncated microcode container header.\n");
 		return false;
 	}
 
 	cont_magic = *(const u32 *)buf;
 	if (cont_magic != UCODE_MAGIC) {
-		if (!early)
-			pr_debug("Invalid magic value (0x%08x).\n", cont_magic);
-
+		pr_debug("Invalid magic value (0x%08x).\n", cont_magic);
 		return false;
 	}
 
@@ -147,23 +143,20 @@ static bool verify_container(const u8 *buf, size_t buf_size, bool early)
 
 /*
  * Check whether there is a valid, non-truncated CPU equivalence table at the
- * beginning of @buf of size @buf_size. Set @early to use this function in the
- * early path.
+ * beginning of @buf of size @buf_size.
  */
-static bool verify_equivalence_table(const u8 *buf, size_t buf_size, bool early)
+static bool verify_equivalence_table(const u8 *buf, size_t buf_size)
 {
 	const u32 *hdr = (const u32 *)buf;
 	u32 cont_type, equiv_tbl_len;
 
-	if (!verify_container(buf, buf_size, early))
+	if (!verify_container(buf, buf_size))
 		return false;
 
 	cont_type = hdr[1];
 	if (cont_type != UCODE_EQUIV_CPU_TABLE_TYPE) {
-		if (!early)
-			pr_debug("Wrong microcode container equivalence table type: %u.\n",
-			       cont_type);
-
+		pr_debug("Wrong microcode container equivalence table type: %u.\n",
+			 cont_type);
 		return false;
 	}
 
@@ -172,9 +165,7 @@ static bool verify_equivalence_table(const u8 *buf, size_t buf_size, bool early)
 	equiv_tbl_len = hdr[2];
 	if (equiv_tbl_len < sizeof(struct equiv_cpu_entry) ||
 	    buf_size < equiv_tbl_len) {
-		if (!early)
-			pr_debug("Truncated equivalence table.\n");
-
+		pr_debug("Truncated equivalence table.\n");
 		return false;
 	}
 
@@ -183,22 +174,19 @@ static bool verify_equivalence_table(const u8 *buf, size_t buf_size, bool early)
 
 /*
  * Check whether there is a valid, non-truncated microcode patch section at the
- * beginning of @buf of size @buf_size. Set @early to use this function in the
- * early path.
+ * beginning of @buf of size @buf_size.
  *
  * On success, @sh_psize returns the patch size according to the section header,
  * to the caller.
  */
 static bool
-__verify_patch_section(const u8 *buf, size_t buf_size, u32 *sh_psize, bool early)
+__verify_patch_section(const u8 *buf, size_t buf_size, u32 *sh_psize)
 {
 	u32 p_type, p_size;
 	const u32 *hdr;
 
 	if (buf_size < SECTION_HDR_SIZE) {
-		if (!early)
-			pr_debug("Truncated patch section.\n");
-
+		pr_debug("Truncated patch section.\n");
 		return false;
 	}
 
@@ -207,17 +195,13 @@ __verify_patch_section(const u8 *buf, size_t buf_size, u32 *sh_psize, bool early
 	p_size = hdr[1];
 
 	if (p_type != UCODE_UCODE_TYPE) {
-		if (!early)
-			pr_debug("Invalid type field (0x%x) in container file section header.\n",
-				p_type);
-
+		pr_debug("Invalid type field (0x%x) in container file section header.\n",
+			 p_type);
 		return false;
 	}
 
 	if (p_size < sizeof(struct microcode_header_amd)) {
-		if (!early)
-			pr_debug("Patch of size %u too short.\n", p_size);
-
+		pr_debug("Patch of size %u too short.\n", p_size);
 		return false;
 	}
 
@@ -269,7 +253,7 @@ static unsigned int __verify_patch_size(u8 family, u32 sh_psize, size_t buf_size
  * 0: success
  */
 static int
-verify_patch(u8 family, const u8 *buf, size_t buf_size, u32 *patch_size, bool early)
+verify_patch(u8 family, const u8 *buf, size_t buf_size, u32 *patch_size)
 {
 	struct microcode_header_amd *mc_hdr;
 	unsigned int ret;
@@ -277,7 +261,7 @@ verify_patch(u8 family, const u8 *buf, size_t buf_size, u32 *patch_size, bool ea
 	u16 proc_id;
 	u8 patch_fam;
 
-	if (!__verify_patch_section(buf, buf_size, &sh_psize, early))
+	if (!__verify_patch_section(buf, buf_size, &sh_psize))
 		return -1;
 
 	/*
@@ -292,16 +276,13 @@ verify_patch(u8 family, const u8 *buf, size_t buf_size, u32 *patch_size, bool ea
 	 * size sh_psize, as the section claims.
 	 */
 	if (buf_size < sh_psize) {
-		if (!early)
-			pr_debug("Patch of size %u truncated.\n", sh_psize);
-
+		pr_debug("Patch of size %u truncated.\n", sh_psize);
 		return -1;
 	}
 
 	ret = __verify_patch_size(family, sh_psize, buf_size);
 	if (!ret) {
-		if (!early)
-			pr_debug("Per-family patch size mismatch.\n");
+		pr_debug("Per-family patch size mismatch.\n");
 		return -1;
 	}
 
@@ -309,8 +290,7 @@ verify_patch(u8 family, const u8 *buf, size_t buf_size, u32 *patch_size, bool ea
 
 	mc_hdr	= (struct microcode_header_amd *)(buf + SECTION_HDR_SIZE);
 	if (mc_hdr->nb_dev_id || mc_hdr->sb_dev_id) {
-		if (!early)
-			pr_err("Patch-ID 0x%08x: chipset-specific code unsupported.\n", mc_hdr->patch_id);
+		pr_err("Patch-ID 0x%08x: chipset-specific code unsupported.\n", mc_hdr->patch_id);
 		return -1;
 	}
 
@@ -337,7 +317,7 @@ static size_t parse_container(u8 *ucode, size_t size, struct cont_desc *desc)
 	u16 eq_id;
 	u8 *buf;
 
-	if (!verify_equivalence_table(ucode, size, true))
+	if (!verify_equivalence_table(ucode, size))
 		return 0;
 
 	buf = ucode;
@@ -364,7 +344,7 @@ static size_t parse_container(u8 *ucode, size_t size, struct cont_desc *desc)
 		u32 patch_size;
 		int ret;
 
-		ret = verify_patch(x86_family(desc->cpuid_1_eax), buf, size, &patch_size, true);
+		ret = verify_patch(x86_family(desc->cpuid_1_eax), buf, size, &patch_size);
 		if (ret < 0) {
 			/*
 			 * Patch verification failed, skip to the next container, if
@@ -456,14 +436,8 @@ static bool early_apply_microcode(u32 cpuid_1_eax, void *ucode, size_t size)
 {
 	struct cont_desc desc = { 0 };
 	struct microcode_amd *mc;
-	u32 rev, dummy, *new_rev;
 	bool ret = false;
-
-#ifdef CONFIG_X86_32
-	new_rev = (u32 *)__pa_nodebug(&ucode_new_rev);
-#else
-	new_rev = &ucode_new_rev;
-#endif
+	u32 rev, dummy;
 
 	desc.cpuid_1_eax = cpuid_1_eax;
 
@@ -484,8 +458,8 @@ static bool early_apply_microcode(u32 cpuid_1_eax, void *ucode, size_t size)
 		return ret;
 
 	if (!__apply_microcode_amd(mc)) {
-		*new_rev = mc->hdr.patch_id;
-		ret      = true;
+		ucode_new_rev = mc->hdr.patch_id;
+		ret = true;
 	}
 
 	return ret;
@@ -514,26 +488,13 @@ static bool get_builtin_microcode(struct cpio_data *cp, unsigned int family)
 
 static void find_blobs_in_containers(unsigned int cpuid_1_eax, struct cpio_data *ret)
 {
-	struct ucode_cpu_info *uci;
 	struct cpio_data cp;
-	const char *path;
-	bool use_pa;
-
-	if (IS_ENABLED(CONFIG_X86_32)) {
-		uci	= (struct ucode_cpu_info *)__pa_nodebug(ucode_cpu_info);
-		path	= (const char *)__pa_nodebug(ucode_path);
-		use_pa	= true;
-	} else {
-		uci     = ucode_cpu_info;
-		path	= ucode_path;
-		use_pa	= false;
-	}
 
 	if (!get_builtin_microcode(&cp, x86_family(cpuid_1_eax)))
-		cp = find_microcode_in_initrd(path, use_pa);
+		cp = find_microcode_in_initrd(ucode_path);
 
 	/* Needed in load_microcode_amd() */
-	uci->cpu_sig.sig = cpuid_1_eax;
+	ucode_cpu_info->cpu_sig.sig = cpuid_1_eax;
 
 	*ret = cp;
 }
@@ -562,7 +523,7 @@ int __init save_microcode_in_initrd_amd(unsigned int cpuid_1_eax)
 	enum ucode_state ret;
 	struct cpio_data cp;
 
-	cp = find_microcode_in_initrd(ucode_path, false);
+	cp = find_microcode_in_initrd(ucode_path);
 	if (!(cp.data && cp.size))
 		return -EINVAL;
 
@@ -738,7 +699,7 @@ static size_t install_equiv_cpu_table(const u8 *buf, size_t buf_size)
 	u32 equiv_tbl_len;
 	const u32 *hdr;
 
-	if (!verify_equivalence_table(buf, buf_size, false))
+	if (!verify_equivalence_table(buf, buf_size))
 		return 0;
 
 	hdr = (const u32 *)buf;
@@ -784,7 +745,7 @@ static int verify_and_add_patch(u8 family, u8 *fw, unsigned int leftover,
 	u16 proc_id;
 	int ret;
 
-	ret = verify_patch(family, fw, leftover, patch_size, false);
+	ret = verify_patch(family, fw, leftover, patch_size);
 	if (ret)
 		return ret;
 
@@ -918,7 +879,7 @@ static enum ucode_state request_microcode_amd(int cpu, struct device *device)
 	}
 
 	ret = UCODE_ERROR;
-	if (!verify_container(fw->data, fw->size, false))
+	if (!verify_container(fw->data, fw->size))
 		goto fw_release;
 
 	ret = load_microcode_amd(c->x86, fw->data, fw->size);
diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index 6cc7a2c..f76c2c1 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -90,10 +90,7 @@ static bool amd_check_current_patch_level(void)
 
 	native_rdmsr(MSR_AMD64_PATCH_LEVEL, lvl, dummy);
 
-	if (IS_ENABLED(CONFIG_X86_32))
-		levels = (u32 *)__pa_nodebug(&final_levels);
-	else
-		levels = final_levels;
+	levels = final_levels;
 
 	for (i = 0; levels[i]; i++) {
 		if (lvl == levels[i])
@@ -105,17 +102,8 @@ static bool amd_check_current_patch_level(void)
 static bool __init check_loader_disabled_bsp(void)
 {
 	static const char *__dis_opt_str = "dis_ucode_ldr";
-
-#ifdef CONFIG_X86_32
-	const char *cmdline = (const char *)__pa_nodebug(boot_command_line);
-	const char *option  = (const char *)__pa_nodebug(__dis_opt_str);
-	bool *res = (bool *)__pa_nodebug(&dis_ucode_ldr);
-
-#else /* CONFIG_X86_64 */
 	const char *cmdline = boot_command_line;
 	const char *option  = __dis_opt_str;
-	bool *res = &dis_ucode_ldr;
-#endif
 
 	/*
 	 * CPUID(1).ECX[31]: reserved for hypervisor use. This is still not
@@ -123,17 +111,17 @@ static bool __init check_loader_disabled_bsp(void)
 	 * that's good enough as they don't land on the BSP path anyway.
 	 */
 	if (native_cpuid_ecx(1) & BIT(31))
-		return *res;
+		return true;
 
 	if (x86_cpuid_vendor() == X86_VENDOR_AMD) {
 		if (amd_check_current_patch_level())
-			return *res;
+			return true;
 	}
 
 	if (cmdline_find_option_bool(cmdline, option) <= 0)
-		*res = false;
+		dis_ucode_ldr = false;
 
-	return *res;
+	return dis_ucode_ldr;
 }
 
 void __init load_ucode_bsp(void)
@@ -171,20 +159,11 @@ void __init load_ucode_bsp(void)
 		load_ucode_amd_early(cpuid_1_eax);
 }
 
-static bool check_loader_disabled_ap(void)
-{
-#ifdef CONFIG_X86_32
-	return *((bool *)__pa_nodebug(&dis_ucode_ldr));
-#else
-	return dis_ucode_ldr;
-#endif
-}
-
 void load_ucode_ap(void)
 {
 	unsigned int cpuid_1_eax;
 
-	if (check_loader_disabled_ap())
+	if (dis_ucode_ldr)
 		return;
 
 	cpuid_1_eax = native_cpuid_eax(1);
@@ -226,40 +205,31 @@ static int __init save_microcode_in_initrd(void)
 	return ret;
 }
 
-struct cpio_data find_microcode_in_initrd(const char *path, bool use_pa)
+struct cpio_data find_microcode_in_initrd(const char *path)
 {
 #ifdef CONFIG_BLK_DEV_INITRD
 	unsigned long start = 0;
 	size_t size;
 
 #ifdef CONFIG_X86_32
-	struct boot_params *params;
-
-	if (use_pa)
-		params = (struct boot_params *)__pa_nodebug(&boot_params);
-	else
-		params = &boot_params;
-
-	size = params->hdr.ramdisk_size;
-
+	size = boot_params.hdr.ramdisk_size;
 	/*
 	 * Set start only if we have an initrd image. We cannot use initrd_start
 	 * because it is not set that early yet.
 	 */
 	if (size)
-		start = params->hdr.ramdisk_image;
+		start = boot_params.hdr.ramdisk_image;
 
-# else /* CONFIG_X86_64 */
+#else /* CONFIG_X86_64 */
 	size  = (unsigned long)boot_params.ext_ramdisk_size << 32;
 	size |= boot_params.hdr.ramdisk_size;
 
 	if (size) {
 		start  = (unsigned long)boot_params.ext_ramdisk_image << 32;
 		start |= boot_params.hdr.ramdisk_image;
-
 		start += PAGE_OFFSET;
 	}
-# endif
+#endif
 
 	/*
 	 * Fixup the start address: after reserve_initrd() runs, initrd_start
@@ -270,23 +240,10 @@ struct cpio_data find_microcode_in_initrd(const char *path, bool use_pa)
 	 * initrd_gone is for the hotplug case where we've thrown out initrd
 	 * already.
 	 */
-	if (!use_pa) {
-		if (initrd_gone)
-			return (struct cpio_data){ NULL, 0, "" };
-		if (initrd_start)
-			start = initrd_start;
-	} else {
-		/*
-		 * The picture with physical addresses is a bit different: we
-		 * need to get the *physical* address to which the ramdisk was
-		 * relocated, i.e., relocated_ramdisk (not initrd_start) and
-		 * since we're running from physical addresses, we need to access
-		 * relocated_ramdisk through its *physical* address too.
-		 */
-		u64 *rr = (u64 *)__pa_nodebug(&relocated_ramdisk);
-		if (*rr)
-			start = *rr;
-	}
+	if (initrd_gone)
+		return (struct cpio_data){ NULL, 0, "" };
+	if (initrd_start)
+		start = initrd_start;
 
 	return find_cpio_data(path, (void *)start, size, NULL);
 #else /* !CONFIG_BLK_DEV_INITRD */
diff --git a/arch/x86/kernel/cpu/microcode/intel.c b/arch/x86/kernel/cpu/microcode/intel.c
index 94dd6af..24a5c8b 100644
--- a/arch/x86/kernel/cpu/microcode/intel.c
+++ b/arch/x86/kernel/cpu/microcode/intel.c
@@ -319,15 +319,8 @@ static void save_microcode_patch(struct ucode_cpu_info *uci, void *data, unsigne
 	if (!intel_find_matching_signature(p->data, uci->cpu_sig.sig, uci->cpu_sig.pf))
 		return;
 
-	/*
-	 * Save for early loading. On 32-bit, that needs to be a physical
-	 * address as the APs are running from physical addresses, before
-	 * paging has been enabled.
-	 */
-	if (IS_ENABLED(CONFIG_X86_32))
-		intel_ucode_patch = (struct microcode_intel *)__pa_nodebug(p->data);
-	else
-		intel_ucode_patch = p->data;
+	/* Save for early loading */
+	intel_ucode_patch = p->data;
 }
 
 /*
@@ -420,66 +413,10 @@ static bool load_builtin_intel_microcode(struct cpio_data *cp)
 	return false;
 }
 
-static void print_ucode_info(int old_rev, int new_rev, unsigned int date)
-{
-	pr_info_once("updated early: 0x%x -> 0x%x, date = %04x-%02x-%02x\n",
-		     old_rev,
-		     new_rev,
-		     date & 0xffff,
-		     date >> 24,
-		     (date >> 16) & 0xff);
-}
-
-#ifdef CONFIG_X86_32
-
-static int delay_ucode_info;
-static int current_mc_date;
-static int early_old_rev;
-
-/*
- * Print early updated ucode info after printk works. This is delayed info dump.
- */
-void show_ucode_info_early(void)
-{
-	struct ucode_cpu_info uci;
-
-	if (delay_ucode_info) {
-		intel_cpu_collect_info(&uci);
-		print_ucode_info(early_old_rev, uci.cpu_sig.rev, current_mc_date);
-		delay_ucode_info = 0;
-	}
-}
-
-/*
- * At this point, we can not call printk() yet. Delay printing microcode info in
- * show_ucode_info_early() until printk() works.
- */
-static void print_ucode(int old_rev, int new_rev, int date)
-{
-	int *delay_ucode_info_p;
-	int *current_mc_date_p;
-	int *early_old_rev_p;
-
-	delay_ucode_info_p = (int *)__pa_nodebug(&delay_ucode_info);
-	current_mc_date_p = (int *)__pa_nodebug(&current_mc_date);
-	early_old_rev_p = (int *)__pa_nodebug(&early_old_rev);
-
-	*delay_ucode_info_p = 1;
-	*current_mc_date_p = date;
-	*early_old_rev_p = old_rev;
-}
-#else
-
-static inline void print_ucode(int old_rev, int new_rev, int date)
-{
-	print_ucode_info(old_rev, new_rev, date);
-}
-#endif
-
-static int apply_microcode_early(struct ucode_cpu_info *uci, bool early)
+static int apply_microcode_early(struct ucode_cpu_info *uci)
 {
 	struct microcode_intel *mc;
-	u32 rev, old_rev;
+	u32 rev, old_rev, date;
 
 	mc = uci->mc;
 	if (!mc)
@@ -513,11 +450,9 @@ static int apply_microcode_early(struct ucode_cpu_info *uci, bool early)
 
 	uci->cpu_sig.rev = rev;
 
-	if (early)
-		print_ucode(old_rev, uci->cpu_sig.rev, mc->hdr.date);
-	else
-		print_ucode_info(old_rev, uci->cpu_sig.rev, mc->hdr.date);
-
+	date = mc->hdr.date;
+	pr_info_once("updated early: 0x%x -> 0x%x, date = %04x-%02x-%02x\n",
+		     old_rev, rev, date & 0xffff, date >> 24, (date >> 16) & 0xff);
 	return 0;
 }
 
@@ -535,7 +470,7 @@ int __init save_microcode_in_initrd_intel(void)
 	intel_ucode_patch = NULL;
 
 	if (!load_builtin_intel_microcode(&cp))
-		cp = find_microcode_in_initrd(ucode_path, false);
+		cp = find_microcode_in_initrd(ucode_path);
 
 	if (!(cp.data && cp.size))
 		return 0;
@@ -551,21 +486,11 @@ int __init save_microcode_in_initrd_intel(void)
  */
 static struct microcode_intel *__load_ucode_intel(struct ucode_cpu_info *uci)
 {
-	static const char *path;
 	struct cpio_data cp;
-	bool use_pa;
-
-	if (IS_ENABLED(CONFIG_X86_32)) {
-		path	  = (const char *)__pa_nodebug(ucode_path);
-		use_pa	  = true;
-	} else {
-		path	  = ucode_path;
-		use_pa	  = false;
-	}
 
 	/* try built-in microcode first */
 	if (!load_builtin_intel_microcode(&cp))
-		cp = find_microcode_in_initrd(path, use_pa);
+		cp = find_microcode_in_initrd(ucode_path);
 
 	if (!(cp.data && cp.size))
 		return NULL;
@@ -586,30 +511,21 @@ void __init load_ucode_intel_bsp(void)
 
 	uci.mc = patch;
 
-	apply_microcode_early(&uci, true);
+	apply_microcode_early(&uci);
 }
 
 void load_ucode_intel_ap(void)
 {
-	struct microcode_intel *patch, **iup;
 	struct ucode_cpu_info uci;
 
-	if (IS_ENABLED(CONFIG_X86_32))
-		iup = (struct microcode_intel **) __pa_nodebug(&intel_ucode_patch);
-	else
-		iup = &intel_ucode_patch;
-
-	if (!*iup) {
-		patch = __load_ucode_intel(&uci);
-		if (!patch)
+	if (!intel_ucode_patch) {
+		intel_ucode_patch = __load_ucode_intel(&uci);
+		if (!intel_ucode_patch)
 			return;
-
-		*iup = patch;
 	}
 
-	uci.mc = *iup;
-
-	apply_microcode_early(&uci, true);
+	uci.mc = intel_ucode_patch;
+	apply_microcode_early(&uci);
 }
 
 static struct microcode_intel *find_patch(struct ucode_cpu_info *uci)
@@ -647,7 +563,7 @@ void reload_ucode_intel(void)
 
 	uci.mc = p;
 
-	apply_microcode_early(&uci, false);
+	apply_microcode_early(&uci);
 }
 
 static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
diff --git a/arch/x86/kernel/cpu/microcode/internal.h b/arch/x86/kernel/cpu/microcode/internal.h
index bf883aa..8843c32 100644
--- a/arch/x86/kernel/cpu/microcode/internal.h
+++ b/arch/x86/kernel/cpu/microcode/internal.h
@@ -44,7 +44,7 @@ struct microcode_ops {
 };
 
 extern struct ucode_cpu_info ucode_cpu_info[];
-struct cpio_data find_microcode_in_initrd(const char *path, bool use_pa);
+struct cpio_data find_microcode_in_initrd(const char *path);
 
 #define MAX_UCODE_COUNT 128
 
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 246a609..bde27a3 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -19,6 +19,7 @@
 #include <asm/apic.h>
 #include <asm/io_apic.h>
 #include <asm/bios_ebda.h>
+#include <asm/microcode.h>
 #include <asm/tlbflush.h>
 #include <asm/bootparam_utils.h>
 
@@ -34,6 +35,8 @@ asmlinkage __visible void __init __noreturn i386_start_kernel(void)
 	/* Make sure IDT is set up before any exception happens */
 	idt_setup_early_handler();
 
+	load_ucode_bsp();
+
 	cr4_init_shadow();
 
 	sanitize_boot_params(&boot_params);
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index c931899..63f6ff4 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -118,11 +118,6 @@ SYM_CODE_START(startup_32)
 	movl %eax, pa(olpc_ofw_pgd)
 #endif
 
-#ifdef CONFIG_MICROCODE
-	/* Early load ucode on BSP. */
-	call load_ucode_bsp
-#endif
-
 	/* Create early pagetables. */
 	call  mk_early_pgtbl_32
 
@@ -157,11 +152,6 @@ SYM_FUNC_START(startup_32_smp)
 	movl %eax,%ss
 	leal -__PAGE_OFFSET(%ecx),%esp
 
-#ifdef CONFIG_MICROCODE
-	/* Early load ucode on AP. */
-	call load_ucode_ap
-#endif
-
 .Ldefault_entry:
 	movl $(CR0_STATE & ~X86_CR0_PG),%eax
 	movl %eax,%cr0
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 48e0406..1d33518 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -258,12 +258,9 @@ static void notrace start_secondary(void *unused)
 	cpu_init_exception_handling();
 
 	/*
-	 * 32-bit systems load the microcode from the ASM startup code for
-	 * historical reasons.
-	 *
-	 * On 64-bit systems load it before reaching the AP alive
-	 * synchronization point below so it is not part of the full per
-	 * CPU serialized bringup part when "parallel" bringup is enabled.
+	 * Load the microcode before reaching the AP alive synchronization
+	 * point below so it is not part of the full per CPU serialized
+	 * bringup part when "parallel" bringup is enabled.
 	 *
 	 * That's even safe when hyperthreading is enabled in the CPU as
 	 * the core code starts the primary threads first and leaves the
@@ -276,8 +273,7 @@ static void notrace start_secondary(void *unused)
 	 * CPUID, MSRs etc. must be strictly serialized to maintain
 	 * software state correctness.
 	 */
-	if (IS_ENABLED(CONFIG_X86_64))
-		load_ucode_ap();
+	load_ucode_ap();
 
 	/*
 	 * Synchronization point with the hotplug core. Sets this CPUs

[PATCH v2 04/10] x86/microcode_intel_lib.c: Early update ucode on Intel's CPU

[Fenghua Yu]

From: Fenghua Yu <fenghua.yu@intel.com>

Define interfaces microcode_sanity_check() and get_matching_microcode(). They
are called both in early boot time and in microcode Intel driver.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/x86/kernel/microcode_intel_lib.c |  174 +++++++++++++++++++++++++++++++++
 1 files changed, 174 insertions(+), 0 deletions(-)
 create mode 100644 arch/x86/kernel/microcode_intel_lib.c

diff --git a/arch/x86/kernel/microcode_intel_lib.c b/arch/x86/kernel/microcode_intel_lib.c
new file mode 100644
index 0000000..ce69320
--- /dev/null
+++ b/arch/x86/kernel/microcode_intel_lib.c
@@ -0,0 +1,174 @@
+/*
+ *	Intel CPU Microcode Update Driver for Linux
+ *
+ *	Copyright (C) 2012 Fenghua Yu <fenghua.yu@intel.com>
+ *			   H Peter Anvin" <hpa@zytor.com>
+ *
+ *	This driver allows to upgrade microcode on Intel processors
+ *	belonging to IA-32 family - PentiumPro, Pentium II,
+ *	Pentium III, Xeon, Pentium 4, etc.
+ *
+ *	Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
+ *	Software Developer's Manual
+ *	Order Number 253668 or free download from:
+ *
+ *	http://developer.intel.com/Assets/PDF/manual/253668.pdf
+ *
+ *	For more information, go to http://www.urbanmyth.org/microcode
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ */
+#include <linux/firmware.h>
+#include <linux/uaccess.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <asm/microcode_intel.h>
+#include <asm/processor.h>
+#include <asm/msr.h>
+
+static inline int
+update_match_cpu(unsigned int csig, unsigned int cpf,
+		 unsigned int sig, unsigned int pf)
+{
+	return (!sigmatch(sig, csig, pf, cpf)) ? 0 : 1;
+}
+
+int
+update_match_revision(struct microcode_header_intel *mc_header, int rev)
+{
+	return (mc_header->rev <= rev) ? 0 : 1;
+}
+
+int microcode_sanity_check(void *mc, int print_err)
+{
+	unsigned long total_size, data_size, ext_table_size;
+	struct microcode_header_intel *mc_header = mc;
+	struct extended_sigtable *ext_header = NULL;
+	int sum, orig_sum, ext_sigcount = 0, i;
+	struct extended_signature *ext_sig;
+
+	total_size = get_totalsize(mc_header);
+	data_size = get_datasize(mc_header);
+
+	if (data_size + MC_HEADER_SIZE > total_size) {
+		if (print_err)
+			pr_err("error! Bad data size in microcode data file\n");
+		return -EINVAL;
+	}
+
+	if (mc_header->ldrver != 1 || mc_header->hdrver != 1) {
+		if (print_err)
+			pr_err("error! Unknown microcode update format\n");
+		return -EINVAL;
+	}
+	ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
+	if (ext_table_size) {
+		if ((ext_table_size < EXT_HEADER_SIZE)
+		 || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
+			if (print_err)
+				pr_err("error! Small exttable size in microcode data file\n");
+			return -EINVAL;
+		}
+		ext_header = mc + MC_HEADER_SIZE + data_size;
+		if (ext_table_size != exttable_size(ext_header)) {
+			if (print_err)
+				pr_err("error! Bad exttable size in microcode data file\n");
+			return -EFAULT;
+		}
+		ext_sigcount = ext_header->count;
+	}
+
+	/* check extended table checksum */
+	if (ext_table_size) {
+		int ext_table_sum = 0;
+		int *ext_tablep = (int *)ext_header;
+
+		i = ext_table_size / DWSIZE;
+		while (i--)
+			ext_table_sum += ext_tablep[i];
+		if (ext_table_sum) {
+			if (print_err)
+				pr_warn("aborting, bad extended signature table checksum\n");
+			return -EINVAL;
+		}
+	}
+
+	/* calculate the checksum */
+	orig_sum = 0;
+	i = (MC_HEADER_SIZE + data_size) / DWSIZE;
+	while (i--)
+		orig_sum += ((int *)mc)[i];
+	if (orig_sum) {
+		if (print_err)
+			pr_err("aborting, bad checksum\n");
+		return -EINVAL;
+	}
+	if (!ext_table_size)
+		return 0;
+	/* check extended signature checksum */
+	for (i = 0; i < ext_sigcount; i++) {
+		ext_sig = (void *)ext_header + EXT_HEADER_SIZE +
+			  EXT_SIGNATURE_SIZE * i;
+		sum = orig_sum
+			- (mc_header->sig + mc_header->pf + mc_header->cksum)
+			+ (ext_sig->sig + ext_sig->pf + ext_sig->cksum);
+		if (sum) {
+			if (print_err)
+				pr_err("aborting, bad checksum\n");
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(microcode_sanity_check);
+
+/*
+ * return 0 - no update found
+ * return 1 - found update
+ */
+int get_matching_sig(unsigned int csig, int cpf, void *mc, int rev)
+{
+	struct microcode_header_intel *mc_header = mc;
+	struct extended_sigtable *ext_header;
+	unsigned long total_size = get_totalsize(mc_header);
+	int ext_sigcount, i;
+	struct extended_signature *ext_sig;
+
+	if (update_match_cpu(csig, cpf, mc_header->sig, mc_header->pf))
+		return 1;
+
+	/* Look for ext. headers: */
+	if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE)
+		return 0;
+
+	ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE;
+	ext_sigcount = ext_header->count;
+	ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
+
+	for (i = 0; i < ext_sigcount; i++) {
+		if (update_match_cpu(csig, cpf, ext_sig->sig, ext_sig->pf))
+			return 1;
+		ext_sig++;
+	}
+	return 0;
+}
+
+/*
+ * return 0 - no update found
+ * return 1 - found update
+ */
+int get_matching_microcode(unsigned int csig, int cpf, void *mc, int rev)
+{
+	struct microcode_header_intel *mc_header = mc;
+
+	if (!update_match_revision(mc_header, rev))
+		return 0;
+
+	return get_matching_sig(csig, cpf, mc, rev);
+}
+EXPORT_SYMBOL_GPL(get_matching_microcode);
-- 
1.7.2

[tip:x86/microcode] x86/microcode_intel_lib.c: Early update ucode on Intel's CPU

[tip-bot for Fenghua Yu]

Commit-ID:  da7d824a00ec0f4d19e2b51653410bde0de40226
Gitweb:     http://git.kernel.org/tip/da7d824a00ec0f4d19e2b51653410bde0de40226
Author:     Fenghua Yu <fenghua.yu@intel.com>
AuthorDate: Thu, 29 Nov 2012 17:47:42 -0800
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Fri, 30 Nov 2012 15:18:15 -0800

x86/microcode_intel_lib.c: Early update ucode on Intel's CPU

Define interfaces microcode_sanity_check() and get_matching_microcode(). They
are called both in early boot time and in microcode Intel driver.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1354240068-9821-5-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/microcode_intel_lib.c | 174 ++++++++++++++++++++++++++++++++++
 1 file changed, 174 insertions(+)

diff --git a/arch/x86/kernel/microcode_intel_lib.c b/arch/x86/kernel/microcode_intel_lib.c
new file mode 100644
index 0000000..ce69320
--- /dev/null
+++ b/arch/x86/kernel/microcode_intel_lib.c
@@ -0,0 +1,174 @@
+/*
+ *	Intel CPU Microcode Update Driver for Linux
+ *
+ *	Copyright (C) 2012 Fenghua Yu <fenghua.yu@intel.com>
+ *			   H Peter Anvin" <hpa@zytor.com>
+ *
+ *	This driver allows to upgrade microcode on Intel processors
+ *	belonging to IA-32 family - PentiumPro, Pentium II,
+ *	Pentium III, Xeon, Pentium 4, etc.
+ *
+ *	Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
+ *	Software Developer's Manual
+ *	Order Number 253668 or free download from:
+ *
+ *	http://developer.intel.com/Assets/PDF/manual/253668.pdf
+ *
+ *	For more information, go to http://www.urbanmyth.org/microcode
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ */
+#include <linux/firmware.h>
+#include <linux/uaccess.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <asm/microcode_intel.h>
+#include <asm/processor.h>
+#include <asm/msr.h>
+
+static inline int
+update_match_cpu(unsigned int csig, unsigned int cpf,
+		 unsigned int sig, unsigned int pf)
+{
+	return (!sigmatch(sig, csig, pf, cpf)) ? 0 : 1;
+}
+
+int
+update_match_revision(struct microcode_header_intel *mc_header, int rev)
+{
+	return (mc_header->rev <= rev) ? 0 : 1;
+}
+
+int microcode_sanity_check(void *mc, int print_err)
+{
+	unsigned long total_size, data_size, ext_table_size;
+	struct microcode_header_intel *mc_header = mc;
+	struct extended_sigtable *ext_header = NULL;
+	int sum, orig_sum, ext_sigcount = 0, i;
+	struct extended_signature *ext_sig;
+
+	total_size = get_totalsize(mc_header);
+	data_size = get_datasize(mc_header);
+
+	if (data_size + MC_HEADER_SIZE > total_size) {
+		if (print_err)
+			pr_err("error! Bad data size in microcode data file\n");
+		return -EINVAL;
+	}
+
+	if (mc_header->ldrver != 1 || mc_header->hdrver != 1) {
+		if (print_err)
+			pr_err("error! Unknown microcode update format\n");
+		return -EINVAL;
+	}
+	ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
+	if (ext_table_size) {
+		if ((ext_table_size < EXT_HEADER_SIZE)
+		 || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
+			if (print_err)
+				pr_err("error! Small exttable size in microcode data file\n");
+			return -EINVAL;
+		}
+		ext_header = mc + MC_HEADER_SIZE + data_size;
+		if (ext_table_size != exttable_size(ext_header)) {
+			if (print_err)
+				pr_err("error! Bad exttable size in microcode data file\n");
+			return -EFAULT;
+		}
+		ext_sigcount = ext_header->count;
+	}
+
+	/* check extended table checksum */
+	if (ext_table_size) {
+		int ext_table_sum = 0;
+		int *ext_tablep = (int *)ext_header;
+
+		i = ext_table_size / DWSIZE;
+		while (i--)
+			ext_table_sum += ext_tablep[i];
+		if (ext_table_sum) {
+			if (print_err)
+				pr_warn("aborting, bad extended signature table checksum\n");
+			return -EINVAL;
+		}
+	}
+
+	/* calculate the checksum */
+	orig_sum = 0;
+	i = (MC_HEADER_SIZE + data_size) / DWSIZE;
+	while (i--)
+		orig_sum += ((int *)mc)[i];
+	if (orig_sum) {
+		if (print_err)
+			pr_err("aborting, bad checksum\n");
+		return -EINVAL;
+	}
+	if (!ext_table_size)
+		return 0;
+	/* check extended signature checksum */
+	for (i = 0; i < ext_sigcount; i++) {
+		ext_sig = (void *)ext_header + EXT_HEADER_SIZE +
+			  EXT_SIGNATURE_SIZE * i;
+		sum = orig_sum
+			- (mc_header->sig + mc_header->pf + mc_header->cksum)
+			+ (ext_sig->sig + ext_sig->pf + ext_sig->cksum);
+		if (sum) {
+			if (print_err)
+				pr_err("aborting, bad checksum\n");
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(microcode_sanity_check);
+
+/*
+ * return 0 - no update found
+ * return 1 - found update
+ */
+int get_matching_sig(unsigned int csig, int cpf, void *mc, int rev)
+{
+	struct microcode_header_intel *mc_header = mc;
+	struct extended_sigtable *ext_header;
+	unsigned long total_size = get_totalsize(mc_header);
+	int ext_sigcount, i;
+	struct extended_signature *ext_sig;
+
+	if (update_match_cpu(csig, cpf, mc_header->sig, mc_header->pf))
+		return 1;
+
+	/* Look for ext. headers: */
+	if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE)
+		return 0;
+
+	ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE;
+	ext_sigcount = ext_header->count;
+	ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
+
+	for (i = 0; i < ext_sigcount; i++) {
+		if (update_match_cpu(csig, cpf, ext_sig->sig, ext_sig->pf))
+			return 1;
+		ext_sig++;
+	}
+	return 0;
+}
+
+/*
+ * return 0 - no update found
+ * return 1 - found update
+ */
+int get_matching_microcode(unsigned int csig, int cpf, void *mc, int rev)
+{
+	struct microcode_header_intel *mc_header = mc;
+
+	if (!update_match_revision(mc_header, rev))
+		return 0;
+
+	return get_matching_sig(csig, cpf, mc, rev);
+}
+EXPORT_SYMBOL_GPL(get_matching_microcode);