Make set_handle_irq and handle_arch_irq generic, v3

Make set_handle_irq and handle_arch_irq generic, v3

[Palmer Dabbelt]

This is my third version of this patch set, but the original cover
letter is still the most relevant description I can come up with.

    This patch set has been sitting around for a while, but it got a bit lost
    in the shuffle.  In RISC-V land we currently couple do_IRQ (the C entry
    point for interrupt handling) to our first-level interrupt controller.
    While this isn't completely crazy (as the first-level interrupt controller
    is specified by the ISA), it is a bit awkward.

    This patch set decouples our trap handler from our first-level IRQ chip
    driver by copying what a handful of other architectures are doing.  This
    does add an additional load to the interrupt handling path, but there's a
    handful of performance problems in there that I've been meaning to look at
    so I don't mind adding another one for now.  The advantage is that our
    irqchip driver is decoupled from our arch port, at least at compile time.

I've build tested this with defconfigs on all the modified architectures
after both patch 1 and 5.  I've left the old acks in for the later
patches as the patch set has changed very little since I last submitted
it.

Changes since v2:

* This is now called CONFIG_GENERIC_IRQ_MULTI_HANDLER instead of
  MULTI_IRQ_HANDLER.
* Rather than converting the ARM code to generic code, this adds new
  generic code (based on the ARM implementation) and then provides
  separate patches to convert each architecture over to use
  CONFIG_GENERIC_IRQ_MULTI_HANDLER.

Changes since v1:

* I based this on arm instead of arm64, which means we guard the selection of
  these routines with CONFIG_MULTI_IRQ_HANDLER.
* The changes are in kernel/irq/handle.c and include/linux/irq.h instead of
  lib.
* I've converted the arm, arm64, and openrisc ports to use the generic versions
  of these routines.


[PATCH v3 1/5] irq: Add CONFIG_GENERIC_IRQ_MULTI_HANDLER
[PATCH v3 2/5] RISC-V: Move to the new GENERIC_IRQ_MULTI_HANDLER
[PATCH v3 3/5] arm: Convert to GENERIC_IRQ_MULTI_HANDLER
[PATCH v3 4/5] arm64: Use the new GENERIC_IRQ_MULTI_HANDLER
[PATCH v3 5/5] openrisc: Use the new GENERIC_IRQ_MULTI_HANDLER

[PATCH v3 1/5] irq: Add CONFIG_GENERIC_IRQ_MULTI_HANDLER

[Palmer Dabbelt]

It looks like the arm irqchip registration mechanism has been copied
into a handful of ports, including arm64 and openrisc.  I want to use
this in the RISC-V port, so I thought it would be good to make this
generic instead.

This patch copies the arm definition of CONFIG_MULTI_IRQ_HANDLER into
kernel/irq under CONFIG_GENERIC_MULTI_IRQ_HANDLER.  This patch is
currently all dead code, but it will be enabled in the various other
architectures in subsequent patches.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
---
 include/linux/irq.h | 18 ++++++++++++++++++
 kernel/irq/Kconfig  |  5 +++++
 kernel/irq/handle.c | 15 +++++++++++++++
 3 files changed, 38 insertions(+)

diff --git a/include/linux/irq.h b/include/linux/irq.h
index a0231e96a578..77e97872a13e 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -1170,4 +1170,22 @@ int __ipi_send_mask(struct irq_desc *desc, const struct cpumask *dest);
 int ipi_send_single(unsigned int virq, unsigned int cpu);
 int ipi_send_mask(unsigned int virq, const struct cpumask *dest);
 
+#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
+/*
+ * Registers a generic IRQ handling function as the top-level IRQ handler in
+ * the system, which is generally the first C code called from an assembly
+ * architecture-specific interrupt handler.
+ *
+ * Returns 0 on success, or -EBUSY if an IRQ handler has already been
+ * registered.
+ */
+int __init set_handle_irq(void (*handle_irq)(struct pt_regs *));
+
+/*
+ * Allows interrupt handlers to find the irqchip that's been registered as the
+ * top-level IRQ handler.
+ */
+extern void (*handle_arch_irq)(struct pt_regs *) __ro_after_init;
+#endif
+
 #endif /* _LINUX_IRQ_H */
diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
index 6fc87ccda1d7..116a6972f124 100644
--- a/kernel/irq/Kconfig
+++ b/kernel/irq/Kconfig
@@ -132,3 +132,8 @@ config GENERIC_IRQ_DEBUGFS
 	  If you don't know what to do here, say N.
 
 endmenu
+
+config GENERIC_IRQ_MULTI_HANDLER
+	bool
+	help
+	  Allow each machine to specify it's own IRQ handler at run time.
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index 79f987b942b8..3570c715c3e7 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -20,6 +20,10 @@
 
 #include "internals.h"
 
+#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
+void (*handle_arch_irq)(struct pt_regs *) __ro_after_init;
+#endif
+
 /**
  * handle_bad_irq - handle spurious and unhandled irqs
  * @desc:      description of the interrupt
@@ -207,3 +211,14 @@ irqreturn_t handle_irq_event(struct irq_desc *desc)
 	irqd_clear(&desc->irq_data, IRQD_IRQ_INPROGRESS);
 	return ret;
 }
+
+#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
+int __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
+{
+	if (handle_arch_irq)
+		return -EBUSY;
+
+	handle_arch_irq = handle_irq;
+	return 0;
+}
+#endif
-- 
2.16.1

[tip:irq/core] genirq: Add CONFIG_GENERIC_IRQ_MULTI_HANDLER

[tip-bot for Palmer Dabbelt]

Commit-ID:  caacdbf4aa567ab5e8de1a4070195c5d3e8f1340
Gitweb:     https://git.kernel.org/tip/caacdbf4aa567ab5e8de1a4070195c5d3e8f1340
Author:     Palmer Dabbelt <palmer@sifive.com>
AuthorDate: Wed, 7 Mar 2018 15:57:27 -0800
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Wed, 14 Mar 2018 21:46:29 +0100

genirq: Add CONFIG_GENERIC_IRQ_MULTI_HANDLER

The arm multi irq handler registration mechanism has been copied into a
handful of architectures, including arm64 and openrisc. RISC-V needs the
same mechanism.

Instead of adding yet another copy for RISC-V copy the arm implementation
into the core code depending on a new Kconfig symbol:
CONFIG_GENERIC_MULTI_IRQ_HANDLER.

Subsequent patches will convert the various architectures.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: jonas@southpole.se
Cc: catalin.marinas@arm.com
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux@armlinux.org.uk
Cc: stefan.kristiansson@saunalahti.fi
Cc: openrisc@lists.librecores.org
Cc: shorne@gmail.com
Cc: linux-riscv@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lkml.kernel.org/r/20180307235731.22627-2-palmer@sifive.com

---
 include/linux/irq.h | 18 ++++++++++++++++++
 kernel/irq/Kconfig  |  5 +++++
 kernel/irq/handle.c | 15 +++++++++++++++
 3 files changed, 38 insertions(+)

diff --git a/include/linux/irq.h b/include/linux/irq.h
index 979eed1b2654..65916a305f3d 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -1165,4 +1165,22 @@ int __ipi_send_mask(struct irq_desc *desc, const struct cpumask *dest);
 int ipi_send_single(unsigned int virq, unsigned int cpu);
 int ipi_send_mask(unsigned int virq, const struct cpumask *dest);
 
+#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
+/*
+ * Registers a generic IRQ handling function as the top-level IRQ handler in
+ * the system, which is generally the first C code called from an assembly
+ * architecture-specific interrupt handler.
+ *
+ * Returns 0 on success, or -EBUSY if an IRQ handler has already been
+ * registered.
+ */
+int __init set_handle_irq(void (*handle_irq)(struct pt_regs *));
+
+/*
+ * Allows interrupt handlers to find the irqchip that's been registered as the
+ * top-level IRQ handler.
+ */
+extern void (*handle_arch_irq)(struct pt_regs *) __ro_after_init;
+#endif
+
 #endif /* _LINUX_IRQ_H */
diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
index 6fc87ccda1d7..5f3e2baefca9 100644
--- a/kernel/irq/Kconfig
+++ b/kernel/irq/Kconfig
@@ -132,3 +132,8 @@ config GENERIC_IRQ_DEBUGFS
 	  If you don't know what to do here, say N.
 
 endmenu
+
+config GENERIC_IRQ_MULTI_HANDLER
+	bool
+	help
+	  Allow to specify the low level IRQ handler at run time.
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index 79f987b942b8..3570c715c3e7 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -20,6 +20,10 @@
 
 #include "internals.h"
 
+#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
+void (*handle_arch_irq)(struct pt_regs *) __ro_after_init;
+#endif
+
 /**
  * handle_bad_irq - handle spurious and unhandled irqs
  * @desc:      description of the interrupt
@@ -207,3 +211,14 @@ irqreturn_t handle_irq_event(struct irq_desc *desc)
 	irqd_clear(&desc->irq_data, IRQD_IRQ_INPROGRESS);
 	return ret;
 }
+
+#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
+int __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
+{
+	if (handle_arch_irq)
+		return -EBUSY;
+
+	handle_arch_irq = handle_irq;
+	return 0;
+}
+#endif

[PATCH v3 2/5] RISC-V: Move to the new GENERIC_IRQ_MULTI_HANDLER handler

[Palmer Dabbelt]

The old mechanism for handling IRQs on RISC-V was pretty ugly: the arch
code looked at the Kconfig entry for our first-level irqchip driver and
called into it directly.

This patch uses the new generic IRQ handling infastructure, which
essentially just deletes a bunch of code.  This does add an additional
load to the interrupt latency, but there's a lot of tuning left to be
done there on RISC-V so I think it's OK for now.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
---
 arch/riscv/Kconfig            |  1 +
 arch/riscv/include/asm/Kbuild |  1 +
 arch/riscv/kernel/entry.S     |  7 +++----
 arch/riscv/kernel/irq.c       | 13 -------------
 4 files changed, 5 insertions(+), 17 deletions(-)

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 04807c7f64cc..148865de1692 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -33,6 +33,7 @@ config RISCV
 	select MODULES_USE_ELF_RELA if MODULES
 	select THREAD_INFO_IN_TASK
 	select RISCV_TIMER
+	select GENERIC_IRQ_MULTI_HANDLER
 
 config MMU
 	def_bool y
diff --git a/arch/riscv/include/asm/Kbuild b/arch/riscv/include/asm/Kbuild
index 4286a5f83876..1e5fd280fb4d 100644
--- a/arch/riscv/include/asm/Kbuild
+++ b/arch/riscv/include/asm/Kbuild
@@ -15,6 +15,7 @@ generic-y += fcntl.h
 generic-y += futex.h
 generic-y += hardirq.h
 generic-y += hash.h
+generic-y += handle_irq.h
 generic-y += hw_irq.h
 generic-y += ioctl.h
 generic-y += ioctls.h
diff --git a/arch/riscv/kernel/entry.S b/arch/riscv/kernel/entry.S
index 56fa592cfa34..9aaf6c986771 100644
--- a/arch/riscv/kernel/entry.S
+++ b/arch/riscv/kernel/entry.S
@@ -167,10 +167,9 @@ ENTRY(handle_exception)
 	bge s4, zero, 1f
 
 	/* Handle interrupts */
-	slli a0, s4, 1
-	srli a0, a0, 1
-	move a1, sp /* pt_regs */
-	tail do_IRQ
+	move a0, sp /* pt_regs */
+	REG_L a1, handle_arch_irq
+	jr a1
 1:
 	/* Exceptions run with interrupts enabled */
 	csrs sstatus, SR_SIE
diff --git a/arch/riscv/kernel/irq.c b/arch/riscv/kernel/irq.c
index 328718e8026e..b74cbfbce2d0 100644
--- a/arch/riscv/kernel/irq.c
+++ b/arch/riscv/kernel/irq.c
@@ -24,16 +24,3 @@ void __init init_IRQ(void)
 {
 	irqchip_init();
 }
-
-asmlinkage void __irq_entry do_IRQ(unsigned int cause, struct pt_regs *regs)
-{
-#ifdef CONFIG_RISCV_INTC
-	/*
-	 * FIXME: We don't want a direct call to riscv_intc_irq here.  The plan
-	 * is to put an IRQ domain here and let the interrupt controller
-	 * register with that, but I poked around the arm64 code a bit and
-	 * there might be a better way to do it (ie, something fully generic).
-	 */
-	riscv_intc_irq(cause, regs);
-#endif
-}
-- 
2.16.1

[tip:irq/core] RISC-V: Move to the new GENERIC_IRQ_MULTI_HANDLER handler

[tip-bot for Palmer Dabbelt]

Commit-ID:  cc6c98485f8e61fb3d6c51821fc75384e5a3a9c3
Gitweb:     https://git.kernel.org/tip/cc6c98485f8e61fb3d6c51821fc75384e5a3a9c3
Author:     Palmer Dabbelt <palmer@sifive.com>
AuthorDate: Wed, 7 Mar 2018 15:57:28 -0800
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Wed, 14 Mar 2018 21:46:29 +0100

RISC-V: Move to the new GENERIC_IRQ_MULTI_HANDLER handler

The existing mechanism for handling IRQs on RISC-V is pretty ugly: the irq
entry code selects the handler via Kconfig dependencies.

Use the new generic IRQ handling infastructure, which allows boot time
registration of the low level entry handler.

This does add an additional load to the interrupt latency, but there's a
lot of tuning left to be done there on RISC-V so it's OK for now.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stafford Horne <shorne@gmail.com>
Cc: jonas@southpole.se
Cc: catalin.marinas@arm.com
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux@armlinux.org.uk
Cc: stefan.kristiansson@saunalahti.fi
Cc: openrisc@lists.librecores.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lkml.kernel.org/r/20180307235731.22627-3-palmer@sifive.com

---
 arch/riscv/Kconfig            |  1 +
 arch/riscv/include/asm/Kbuild |  1 +
 arch/riscv/kernel/entry.S     |  7 +++----
 arch/riscv/kernel/irq.c       | 13 -------------
 4 files changed, 5 insertions(+), 17 deletions(-)

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 04807c7f64cc..148865de1692 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -33,6 +33,7 @@ config RISCV
 	select MODULES_USE_ELF_RELA if MODULES
 	select THREAD_INFO_IN_TASK
 	select RISCV_TIMER
+	select GENERIC_IRQ_MULTI_HANDLER
 
 config MMU
 	def_bool y
diff --git a/arch/riscv/include/asm/Kbuild b/arch/riscv/include/asm/Kbuild
index 4286a5f83876..1e5fd280fb4d 100644
--- a/arch/riscv/include/asm/Kbuild
+++ b/arch/riscv/include/asm/Kbuild
@@ -15,6 +15,7 @@ generic-y += fcntl.h
 generic-y += futex.h
 generic-y += hardirq.h
 generic-y += hash.h
+generic-y += handle_irq.h
 generic-y += hw_irq.h
 generic-y += ioctl.h
 generic-y += ioctls.h
diff --git a/arch/riscv/kernel/entry.S b/arch/riscv/kernel/entry.S
index 56fa592cfa34..9aaf6c986771 100644
--- a/arch/riscv/kernel/entry.S
+++ b/arch/riscv/kernel/entry.S
@@ -167,10 +167,9 @@ ENTRY(handle_exception)
 	bge s4, zero, 1f
 
 	/* Handle interrupts */
-	slli a0, s4, 1
-	srli a0, a0, 1
-	move a1, sp /* pt_regs */
-	tail do_IRQ
+	move a0, sp /* pt_regs */
+	REG_L a1, handle_arch_irq
+	jr a1
 1:
 	/* Exceptions run with interrupts enabled */
 	csrs sstatus, SR_SIE
diff --git a/arch/riscv/kernel/irq.c b/arch/riscv/kernel/irq.c
index 328718e8026e..b74cbfbce2d0 100644
--- a/arch/riscv/kernel/irq.c
+++ b/arch/riscv/kernel/irq.c
@@ -24,16 +24,3 @@ void __init init_IRQ(void)
 {
 	irqchip_init();
 }
-
-asmlinkage void __irq_entry do_IRQ(unsigned int cause, struct pt_regs *regs)
-{
-#ifdef CONFIG_RISCV_INTC
-	/*
-	 * FIXME: We don't want a direct call to riscv_intc_irq here.  The plan
-	 * is to put an IRQ domain here and let the interrupt controller
-	 * register with that, but I poked around the arm64 code a bit and
-	 * there might be a better way to do it (ie, something fully generic).
-	 */
-	riscv_intc_irq(cause, regs);
-#endif
-}

[PATCH v3 3/5] arm: Convert to GENERIC_IRQ_MULTI_HANDLER

[Palmer Dabbelt]

This converts the ARM port to use the recently added
GENERIC_IRQ_MULTI_HANDLER, which is essentially just a copy of ARM's
existhing MULTI_IRQ_HANDLER.  The only changes are:

* handle_arch_irq is now defined in a generic C file instead of an
  arm-specific assembly file.
* handle_arch_irq is not marked as __ro_after_init.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
---
 arch/arm/Kconfig                 | 19 +++++++------------
 arch/arm/include/asm/irq.h       |  5 -----
 arch/arm/include/asm/mach/arch.h |  2 +-
 arch/arm/kernel/entry-armv.S     | 10 ++--------
 arch/arm/kernel/irq.c            | 10 ----------
 arch/arm/kernel/setup.c          |  2 +-
 6 files changed, 11 insertions(+), 37 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7e3d53575486..3f972e83909b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -339,8 +339,8 @@ config ARCH_MULTIPLATFORM
 	select TIMER_OF
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_MULTI_HANDLER
 	select MIGHT_HAVE_PCI
-	select MULTI_IRQ_HANDLER
 	select PCI_DOMAINS if PCI
 	select SPARSE_IRQ
 	select USE_OF
@@ -467,9 +467,9 @@ config ARCH_DOVE
 	bool "Marvell Dove"
 	select CPU_PJ4
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
 	select MIGHT_HAVE_PCI
-	select MULTI_IRQ_HANDLER
 	select MVEBU_MBUS
 	select PINCTRL
 	select PINCTRL_DOVE
@@ -514,8 +514,8 @@ config ARCH_LPC32XX
 	select COMMON_CLK
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
-	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
 	select USE_OF
 	help
@@ -534,11 +534,11 @@ config ARCH_PXA
 	select TIMER_OF
 	select CPU_XSCALE if !CPU_XSC3
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIO_PXA
 	select GPIOLIB
 	select HAVE_IDE
 	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
 	select PLAT_PXA
 	select SPARSE_IRQ
 	help
@@ -574,11 +574,11 @@ config ARCH_SA1100
 	select CPU_FREQ
 	select CPU_SA1100
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
 	select HAVE_IDE
 	select IRQ_DOMAIN
 	select ISA
-	select MULTI_IRQ_HANDLER
 	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
 	help
@@ -592,10 +592,10 @@ config ARCH_S3C24XX
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
 	select GPIOLIB
+	select GENERIC_IRQ_MULTI_HANDLER
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
-	select MULTI_IRQ_HANDLER
 	select NEED_MACH_IO_H
 	select SAMSUNG_ATAGS
 	select USE_OF
@@ -629,10 +629,10 @@ config ARCH_OMAP1
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
 	select HAVE_IDE
 	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
 	select NEED_MACH_IO_H if PCCARD
 	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
@@ -921,11 +921,6 @@ config IWMMXT
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
 
-config MULTI_IRQ_HANDLER
-	bool
-	help
-	  Allow each machine to specify it's own IRQ handler at run time.
-
 if !MMU
 source "arch/arm/Kconfig-nommu"
 endif
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index b6f319606e30..c883fcbe93b6 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -31,11 +31,6 @@ extern void asm_do_IRQ(unsigned int, struct pt_regs *);
 void handle_IRQ(unsigned int, struct pt_regs *);
 void init_IRQ(void);
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-extern void (*handle_arch_irq)(struct pt_regs *);
-extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
-#endif
-
 #ifdef CONFIG_SMP
 extern void arch_trigger_cpumask_backtrace(const cpumask_t *mask,
 					   bool exclude_self);
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 5c1ad11aa392..bb8851208e17 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -59,7 +59,7 @@ struct machine_desc {
 	void			(*init_time)(void);
 	void			(*init_machine)(void);
 	void			(*init_late)(void);
-#ifdef CONFIG_MULTI_IRQ_HANDLER
+#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
 	void			(*handle_irq)(struct pt_regs *);
 #endif
 	void			(*restart)(enum reboot_mode, const char *);
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 1752033b0070..7eeb1f57fa20 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -22,7 +22,7 @@
 #include <asm/glue-df.h>
 #include <asm/glue-pf.h>
 #include <asm/vfpmacros.h>
-#ifndef CONFIG_MULTI_IRQ_HANDLER
+#ifndef CONFIG_GENERIC_IRQ_MULTI_HANDLER
 #include <mach/entry-macro.S>
 #endif
 #include <asm/thread_notify.h>
@@ -39,7 +39,7 @@
  * Interrupt handling.
  */
 	.macro	irq_handler
-#ifdef CONFIG_MULTI_IRQ_HANDLER
+#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
 	ldr	r1, =handle_arch_irq
 	mov	r0, sp
 	badr	lr, 9997f
@@ -1226,9 +1226,3 @@ vector_addrexcptn:
 	.globl	cr_alignment
 cr_alignment:
 	.space	4
-
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-	.globl	handle_arch_irq
-handle_arch_irq:
-	.space	4
-#endif
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index ece04a457486..9908dacf9229 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -102,16 +102,6 @@ void __init init_IRQ(void)
 	uniphier_cache_init();
 }
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-void __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
-{
-	if (handle_arch_irq)
-		return;
-
-	handle_arch_irq = handle_irq;
-}
-#endif
-
 #ifdef CONFIG_SPARSE_IRQ
 int __init arch_probe_nr_irqs(void)
 {
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index fc40a2b40595..f6c26c370427 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -1145,7 +1145,7 @@ void __init setup_arch(char **cmdline_p)
 
 	reserve_crashkernel();
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
+#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
 	handle_arch_irq = mdesc->handle_irq;
 #endif
 
-- 
2.16.1

Re: [PATCH v3 3/5] arm: Convert to GENERIC_IRQ_MULTI_HANDLER

[Thomas Gleixner]

On Wed, 7 Mar 2018, Palmer Dabbelt wrote:

> This converts the ARM port to use the recently added
> GENERIC_IRQ_MULTI_HANDLER, which is essentially just a copy of ARM's
> existhing MULTI_IRQ_HANDLER.  The only changes are:
> 
> * handle_arch_irq is now defined in a generic C file instead of an
>   arm-specific assembly file.
> * handle_arch_irq is not marked as __ro_after_init.

Why? What prevents the generic implementation from doing so?

Thanks,

	tglx

Re: [PATCH v3 3/5] arm: Convert to GENERIC_IRQ_MULTI_HANDLER

[Palmer Dabbelt]

On Wed, 14 Mar 2018 10:07:35 PDT (-0700), tglx@linutronix.de wrote:
> On Wed, 7 Mar 2018, Palmer Dabbelt wrote:
>
>> This converts the ARM port to use the recently added
>> GENERIC_IRQ_MULTI_HANDLER, which is essentially just a copy of ARM's
>> existhing MULTI_IRQ_HANDLER.  The only changes are:
>>
>> * handle_arch_irq is now defined in a generic C file instead of an
>>   arm-specific assembly file.
>> * handle_arch_irq is not marked as __ro_after_init.
>
> Why? What prevents the generic implementation from doing so?

Sorry, I guess that should have said "handle_arch_irq was not marked as
__ro_after_init".  The patch set has __ro_after_init for the generic
implementation, which was not the case for the arm version.

Re: [PATCH v3 3/5] arm: Convert to GENERIC_IRQ_MULTI_HANDLER

[Thomas Gleixner]

On Wed, 14 Mar 2018, Palmer Dabbelt wrote:
> On Wed, 14 Mar 2018 10:07:35 PDT (-0700), tglx@linutronix.de wrote:
> > On Wed, 7 Mar 2018, Palmer Dabbelt wrote:
> > 
> > > This converts the ARM port to use the recently added
> > > GENERIC_IRQ_MULTI_HANDLER, which is essentially just a copy of ARM's
> > > existhing MULTI_IRQ_HANDLER.  The only changes are:
> > > 
> > > * handle_arch_irq is now defined in a generic C file instead of an
> > >   arm-specific assembly file.
> > > * handle_arch_irq is not marked as __ro_after_init.
> > 
> > Why? What prevents the generic implementation from doing so?
> 
> Sorry, I guess that should have said "handle_arch_irq was not marked as
> __ro_after_init".  The patch set has __ro_after_init for the generic
> implementation, which was not the case for the arm version.

That makes sense.... I'll fix that up.

Thanks,

	tglx

[tip:irq/core] ARM: irq: Convert to GENERIC_IRQ_MULTI_HANDLER

[tip-bot for Palmer Dabbelt]

Commit-ID:  886d70aac148f6015ae3d1379c81b98af3e70981
Gitweb:     https://git.kernel.org/tip/886d70aac148f6015ae3d1379c81b98af3e70981
Author:     Palmer Dabbelt <palmer@sifive.com>
AuthorDate: Wed, 7 Mar 2018 15:57:29 -0800
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Wed, 14 Mar 2018 21:46:29 +0100

ARM: irq: Convert to GENERIC_IRQ_MULTI_HANDLER

Convert ARM to use the recently added GENERIC_IRQ_MULTI_HANDLER, which is
essentially just a copy of ARM's existhing MULTI_IRQ_HANDLER.  The only
changes are:

* handle_arch_irq is now defined in a generic C file instead of an
  arm-specific assembly file.
  
* handle_arch_irq is now marked as __ro_after_init which is not an issue as
  the setup function is marked __init already.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: jonas@southpole.se
Cc: catalin.marinas@arm.com
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux@armlinux.org.uk
Cc: stefan.kristiansson@saunalahti.fi
Cc: openrisc@lists.librecores.org
Cc: shorne@gmail.com
Cc: linux-riscv@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lkml.kernel.org/r/20180307235731.22627-4-palmer@sifive.com

---
 arch/arm/Kconfig                 | 19 +++++++------------
 arch/arm/include/asm/irq.h       |  5 -----
 arch/arm/include/asm/mach/arch.h |  2 +-
 arch/arm/kernel/entry-armv.S     | 10 ++--------
 arch/arm/kernel/irq.c            | 10 ----------
 arch/arm/kernel/setup.c          |  2 +-
 6 files changed, 11 insertions(+), 37 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7e3d53575486..3f972e83909b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -339,8 +339,8 @@ config ARCH_MULTIPLATFORM
 	select TIMER_OF
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_MULTI_HANDLER
 	select MIGHT_HAVE_PCI
-	select MULTI_IRQ_HANDLER
 	select PCI_DOMAINS if PCI
 	select SPARSE_IRQ
 	select USE_OF
@@ -467,9 +467,9 @@ config ARCH_DOVE
 	bool "Marvell Dove"
 	select CPU_PJ4
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
 	select MIGHT_HAVE_PCI
-	select MULTI_IRQ_HANDLER
 	select MVEBU_MBUS
 	select PINCTRL
 	select PINCTRL_DOVE
@@ -514,8 +514,8 @@ config ARCH_LPC32XX
 	select COMMON_CLK
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
-	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
 	select USE_OF
 	help
@@ -534,11 +534,11 @@ config ARCH_PXA
 	select TIMER_OF
 	select CPU_XSCALE if !CPU_XSC3
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIO_PXA
 	select GPIOLIB
 	select HAVE_IDE
 	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
 	select PLAT_PXA
 	select SPARSE_IRQ
 	help
@@ -574,11 +574,11 @@ config ARCH_SA1100
 	select CPU_FREQ
 	select CPU_SA1100
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
 	select HAVE_IDE
 	select IRQ_DOMAIN
 	select ISA
-	select MULTI_IRQ_HANDLER
 	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
 	help
@@ -592,10 +592,10 @@ config ARCH_S3C24XX
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
 	select GPIOLIB
+	select GENERIC_IRQ_MULTI_HANDLER
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
-	select MULTI_IRQ_HANDLER
 	select NEED_MACH_IO_H
 	select SAMSUNG_ATAGS
 	select USE_OF
@@ -629,10 +629,10 @@ config ARCH_OMAP1
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
 	select HAVE_IDE
 	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
 	select NEED_MACH_IO_H if PCCARD
 	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
@@ -921,11 +921,6 @@ config IWMMXT
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
 
-config MULTI_IRQ_HANDLER
-	bool
-	help
-	  Allow each machine to specify it's own IRQ handler at run time.
-
 if !MMU
 source "arch/arm/Kconfig-nommu"
 endif
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index b6f319606e30..c883fcbe93b6 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -31,11 +31,6 @@ extern void asm_do_IRQ(unsigned int, struct pt_regs *);
 void handle_IRQ(unsigned int, struct pt_regs *);
 void init_IRQ(void);
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-extern void (*handle_arch_irq)(struct pt_regs *);
-extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
-#endif
-
 #ifdef CONFIG_SMP
 extern void arch_trigger_cpumask_backtrace(const cpumask_t *mask,
 					   bool exclude_self);
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 5c1ad11aa392..bb8851208e17 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -59,7 +59,7 @@ struct machine_desc {
 	void			(*init_time)(void);
 	void			(*init_machine)(void);
 	void			(*init_late)(void);
-#ifdef CONFIG_MULTI_IRQ_HANDLER
+#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
 	void			(*handle_irq)(struct pt_regs *);
 #endif
 	void			(*restart)(enum reboot_mode, const char *);
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 1752033b0070..7eeb1f57fa20 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -22,7 +22,7 @@
 #include <asm/glue-df.h>
 #include <asm/glue-pf.h>
 #include <asm/vfpmacros.h>
-#ifndef CONFIG_MULTI_IRQ_HANDLER
+#ifndef CONFIG_GENERIC_IRQ_MULTI_HANDLER
 #include <mach/entry-macro.S>
 #endif
 #include <asm/thread_notify.h>
@@ -39,7 +39,7 @@
  * Interrupt handling.
  */
 	.macro	irq_handler
-#ifdef CONFIG_MULTI_IRQ_HANDLER
+#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
 	ldr	r1, =handle_arch_irq
 	mov	r0, sp
 	badr	lr, 9997f
@@ -1226,9 +1226,3 @@ vector_addrexcptn:
 	.globl	cr_alignment
 cr_alignment:
 	.space	4
-
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-	.globl	handle_arch_irq
-handle_arch_irq:
-	.space	4
-#endif
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index ece04a457486..9908dacf9229 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -102,16 +102,6 @@ void __init init_IRQ(void)
 	uniphier_cache_init();
 }
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-void __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
-{
-	if (handle_arch_irq)
-		return;
-
-	handle_arch_irq = handle_irq;
-}
-#endif
-
 #ifdef CONFIG_SPARSE_IRQ
 int __init arch_probe_nr_irqs(void)
 {
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index fc40a2b40595..f6c26c370427 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -1145,7 +1145,7 @@ void __init setup_arch(char **cmdline_p)
 
 	reserve_crashkernel();
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
+#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
 	handle_arch_irq = mdesc->handle_irq;
 #endif
 

[PATCH v3 4/5] arm64: Use the new GENERIC_IRQ_MULTI_HANDLER

[Palmer Dabbelt]

It appears arm64 copied arm's GENERIC_IRQ_MULTI_HANDLER code, but made
it unconditional.  I wanted to make this generic so it could be used by
the RISC-V port.  This patch converts the arm64 code to use the new
generic code, which simply consists of deleting the arm64 code and
setting MULTI_IRQ_HANDLER instead.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
---
 arch/arm64/Kconfig           |  1 +
 arch/arm64/include/asm/irq.h |  2 --
 arch/arm64/kernel/irq.c      | 10 ----------
 3 files changed, 1 insertion(+), 12 deletions(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 7381eeb7ef8e..cb03e93f03cf 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -132,6 +132,7 @@ config ARM64
 	select IRQ_DOMAIN
 	select IRQ_FORCED_THREADING
 	select MODULES_USE_ELF_RELA
+	select GENERIC_IRQ_MULTI_HANDLER
 	select NO_BOOTMEM
 	select OF
 	select OF_EARLY_FLATTREE
diff --git a/arch/arm64/include/asm/irq.h b/arch/arm64/include/asm/irq.h
index a0fee6985e6a..b2b0c6405eb0 100644
--- a/arch/arm64/include/asm/irq.h
+++ b/arch/arm64/include/asm/irq.h
@@ -8,8 +8,6 @@
 
 struct pt_regs;
 
-extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
-
 static inline int nr_legacy_irqs(void)
 {
 	return 0;
diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
index 60e5fc661f74..780a12f59a8f 100644
--- a/arch/arm64/kernel/irq.c
+++ b/arch/arm64/kernel/irq.c
@@ -42,16 +42,6 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 	return 0;
 }
 
-void (*handle_arch_irq)(struct pt_regs *) = NULL;
-
-void __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
-{
-	if (handle_arch_irq)
-		return;
-
-	handle_arch_irq = handle_irq;
-}
-
 #ifdef CONFIG_VMAP_STACK
 static void init_irq_stacks(void)
 {
-- 
2.16.1

[tip:irq/core] arm64: Use the new GENERIC_IRQ_MULTI_HANDLER

[tip-bot for Palmer Dabbelt]

Commit-ID:  ec38432a7e84bb614401788ec03c6f05e7915832
Gitweb:     https://git.kernel.org/tip/ec38432a7e84bb614401788ec03c6f05e7915832
Author:     Palmer Dabbelt <palmer@sifive.com>
AuthorDate: Wed, 7 Mar 2018 15:57:30 -0800
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Wed, 14 Mar 2018 21:46:30 +0100

arm64: Use the new GENERIC_IRQ_MULTI_HANDLER

It appears arm64 copied arm's GENERIC_IRQ_MULTI_HANDLER code, but made
it unconditional.

Convert the arm64 code to use the new generic code, which simply consists
of deleting the arm64 code and setting GENERIC_MULTI_IRQ_HANDLER instead.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: jonas@southpole.se
Cc: catalin.marinas@arm.com
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux@armlinux.org.uk
Cc: stefan.kristiansson@saunalahti.fi
Cc: openrisc@lists.librecores.org
Cc: shorne@gmail.com
Cc: linux-riscv@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lkml.kernel.org/r/20180307235731.22627-5-palmer@sifive.com

---
 arch/arm64/Kconfig           |  1 +
 arch/arm64/include/asm/irq.h |  2 --
 arch/arm64/kernel/irq.c      | 10 ----------
 3 files changed, 1 insertion(+), 12 deletions(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 7381eeb7ef8e..cb03e93f03cf 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -132,6 +132,7 @@ config ARM64
 	select IRQ_DOMAIN
 	select IRQ_FORCED_THREADING
 	select MODULES_USE_ELF_RELA
+	select GENERIC_IRQ_MULTI_HANDLER
 	select NO_BOOTMEM
 	select OF
 	select OF_EARLY_FLATTREE
diff --git a/arch/arm64/include/asm/irq.h b/arch/arm64/include/asm/irq.h
index a0fee6985e6a..b2b0c6405eb0 100644
--- a/arch/arm64/include/asm/irq.h
+++ b/arch/arm64/include/asm/irq.h
@@ -8,8 +8,6 @@
 
 struct pt_regs;
 
-extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
-
 static inline int nr_legacy_irqs(void)
 {
 	return 0;
diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
index 60e5fc661f74..780a12f59a8f 100644
--- a/arch/arm64/kernel/irq.c
+++ b/arch/arm64/kernel/irq.c
@@ -42,16 +42,6 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 	return 0;
 }
 
-void (*handle_arch_irq)(struct pt_regs *) = NULL;
-
-void __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
-{
-	if (handle_arch_irq)
-		return;
-
-	handle_arch_irq = handle_irq;
-}
-
 #ifdef CONFIG_VMAP_STACK
 static void init_irq_stacks(void)
 {

[PATCH v3 5/5] openrisc: Use the new GENERIC_IRQ_MULTI_HANDLER

[Palmer Dabbelt]

It appears that openrisc copied arm64's GENERIC_IRQ_MULTI_HANDLER code
(which came from arm).  I wanted to make this generic so I could use it
in the RISC-V port.  This patch converts the openrisc code to use the
generic version.

Acked-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
---
 arch/openrisc/Kconfig      | 1 +
 arch/openrisc/kernel/irq.c | 7 -------
 2 files changed, 1 insertion(+), 7 deletions(-)

diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 339df7324e9c..dfb6a79ba7ff 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -35,6 +35,7 @@ config OPENRISC
 	select ARCH_USE_QUEUED_RWLOCKS
 	select OMPIC if SMP
 	select ARCH_WANT_FRAME_POINTERS
+	select GENERIC_IRQ_MULTI_HANDLER
 
 config CPU_BIG_ENDIAN
 	def_bool y
diff --git a/arch/openrisc/kernel/irq.c b/arch/openrisc/kernel/irq.c
index 35e478a93116..5f9445effaf8 100644
--- a/arch/openrisc/kernel/irq.c
+++ b/arch/openrisc/kernel/irq.c
@@ -41,13 +41,6 @@ void __init init_IRQ(void)
 	irqchip_init();
 }
 
-static void (*handle_arch_irq)(struct pt_regs *);
-
-void __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
-{
-	handle_arch_irq = handle_irq;
-}
-
 void __irq_entry do_IRQ(struct pt_regs *regs)
 {
 	handle_arch_irq(regs);
-- 
2.16.1

[PATCH v4] openrisc: Use the new GENERIC_IRQ_MULTI_HANDLER

[Palmer Dabbelt]

It appears that openrisc copied arm64's GENERIC_IRQ_MULTI_HANDLER code
(which came from arm).  I wanted to make this generic so I could use it
in the RISC-V port.  This patch converts the openrisc code to use the
generic version.

Acked-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
---
 arch/openrisc/Kconfig           | 1 +
 arch/openrisc/include/asm/irq.h | 2 --
 arch/openrisc/kernel/irq.c      | 7 -------
 3 files changed, 1 insertion(+), 9 deletions(-)

diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 339df7324e9c..dfb6a79ba7ff 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -35,6 +35,7 @@ config OPENRISC
 	select ARCH_USE_QUEUED_RWLOCKS
 	select OMPIC if SMP
 	select ARCH_WANT_FRAME_POINTERS
+	select GENERIC_IRQ_MULTI_HANDLER
 
 config CPU_BIG_ENDIAN
 	def_bool y
diff --git a/arch/openrisc/include/asm/irq.h b/arch/openrisc/include/asm/irq.h
index d9eee0a2b7b4..eb612b1865d2 100644
--- a/arch/openrisc/include/asm/irq.h
+++ b/arch/openrisc/include/asm/irq.h
@@ -24,6 +24,4 @@
 
 #define NO_IRQ		(-1)
 
-extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
-
 #endif /* __ASM_OPENRISC_IRQ_H__ */
diff --git a/arch/openrisc/kernel/irq.c b/arch/openrisc/kernel/irq.c
index 35e478a93116..5f9445effaf8 100644
--- a/arch/openrisc/kernel/irq.c
+++ b/arch/openrisc/kernel/irq.c
@@ -41,13 +41,6 @@ void __init init_IRQ(void)
 	irqchip_init();
 }
 
-static void (*handle_arch_irq)(struct pt_regs *);
-
-void __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
-{
-	handle_arch_irq = handle_irq;
-}
-
 void __irq_entry do_IRQ(struct pt_regs *regs)
 {
 	handle_arch_irq(regs);
-- 
2.16.1

[tip:irq/core] openrisc: Use the new GENERIC_IRQ_MULTI_HANDLER

[tip-bot for Palmer Dabbelt]

Commit-ID:  d9af5838180359c6be1c07989c91b28eee93d7e7
Gitweb:     https://git.kernel.org/tip/d9af5838180359c6be1c07989c91b28eee93d7e7
Author:     Palmer Dabbelt <palmer@sifive.com>
AuthorDate: Mon, 12 Mar 2018 11:44:29 -0700
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Wed, 14 Mar 2018 21:46:30 +0100

openrisc: Use the new GENERIC_IRQ_MULTI_HANDLER

It appears that openrisc copied arm64's irq multi handler code (which came
from arm).

Convert it to use the generic version.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Stafford Horne <shorne@gmail.com>
Cc: jonas@southpole.se
Cc: stefan.kristiansson@saunalahti.fi
Cc: openrisc@lists.librecores.org
Link: https://lkml.kernel.org/r/20180312184429.20515-1-palmer@sifive.com

---
 arch/openrisc/Kconfig           | 1 +
 arch/openrisc/include/asm/irq.h | 2 --
 arch/openrisc/kernel/irq.c      | 7 -------
 3 files changed, 1 insertion(+), 9 deletions(-)

diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 339df7324e9c..dfb6a79ba7ff 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -35,6 +35,7 @@ config OPENRISC
 	select ARCH_USE_QUEUED_RWLOCKS
 	select OMPIC if SMP
 	select ARCH_WANT_FRAME_POINTERS
+	select GENERIC_IRQ_MULTI_HANDLER
 
 config CPU_BIG_ENDIAN
 	def_bool y
diff --git a/arch/openrisc/include/asm/irq.h b/arch/openrisc/include/asm/irq.h
index d9eee0a2b7b4..eb612b1865d2 100644
--- a/arch/openrisc/include/asm/irq.h
+++ b/arch/openrisc/include/asm/irq.h
@@ -24,6 +24,4 @@
 
 #define NO_IRQ		(-1)
 
-extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
-
 #endif /* __ASM_OPENRISC_IRQ_H__ */
diff --git a/arch/openrisc/kernel/irq.c b/arch/openrisc/kernel/irq.c
index 35e478a93116..5f9445effaf8 100644
--- a/arch/openrisc/kernel/irq.c
+++ b/arch/openrisc/kernel/irq.c
@@ -41,13 +41,6 @@ void __init init_IRQ(void)
 	irqchip_init();
 }
 
-static void (*handle_arch_irq)(struct pt_regs *);
-
-void __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
-{
-	handle_arch_irq = handle_irq;
-}
-
 void __irq_entry do_IRQ(struct pt_regs *regs)
 {
 	handle_arch_irq(regs);

Re: Make set_handle_irq and handle_arch_irq generic, v3

[Thomas Gleixner]

On Wed, 7 Mar 2018, Palmer Dabbelt wrote:

> This is my third version of this patch set, but the original cover
> letter is still the most relevant description I can come up with.
> 
>     This patch set has been sitting around for a while, but it got a bit lost
>     in the shuffle.  In RISC-V land we currently couple do_IRQ (the C entry
>     point for interrupt handling) to our first-level interrupt controller.
>     While this isn't completely crazy (as the first-level interrupt controller
>     is specified by the ISA), it is a bit awkward.
> 
>     This patch set decouples our trap handler from our first-level IRQ chip
>     driver by copying what a handful of other architectures are doing.  This
>     does add an additional load to the interrupt handling path, but there's a
>     handful of performance problems in there that I've been meaning to look at
>     so I don't mind adding another one for now.  The advantage is that our
>     irqchip driver is decoupled from our arch port, at least at compile time.
> 
> I've build tested this with defconfigs on all the modified architectures
> after both patch 1 and 5.  I've left the old acks in for the later
> patches as the patch set has changed very little since I last submitted
> it.

This looks sensible. We have two options for getting this merged:

1)   I'll take the whole lot through tip/irq/core

2)   I'll apply patch 1/N to a special branch in tip. That branch will contain
     only this commit on top of 4.16-rc4 and can be pulled by the relevant
     architecture maintainers, so they can apply their architecture specific
     patches.

Please let me know how you want to proceed.

Thanks,

	tglx

Re: Make set_handle_irq and handle_arch_irq generic, v3

[Palmer Dabbelt]

On Fri, 09 Mar 2018 02:20:12 PST (-0800), tglx@linutronix.de wrote:
> On Wed, 7 Mar 2018, Palmer Dabbelt wrote:
>
>> This is my third version of this patch set, but the original cover
>> letter is still the most relevant description I can come up with.
>>
>>     This patch set has been sitting around for a while, but it got a bit lost
>>     in the shuffle.  In RISC-V land we currently couple do_IRQ (the C entry
>>     point for interrupt handling) to our first-level interrupt controller.
>>     While this isn't completely crazy (as the first-level interrupt controller
>>     is specified by the ISA), it is a bit awkward.
>>
>>     This patch set decouples our trap handler from our first-level IRQ chip
>>     driver by copying what a handful of other architectures are doing.  This
>>     does add an additional load to the interrupt handling path, but there's a
>>     handful of performance problems in there that I've been meaning to look at
>>     so I don't mind adding another one for now.  The advantage is that our
>>     irqchip driver is decoupled from our arch port, at least at compile time.
>>
>> I've build tested this with defconfigs on all the modified architectures
>> after both patch 1 and 5.  I've left the old acks in for the later
>> patches as the patch set has changed very little since I last submitted
>> it.
>
> This looks sensible. We have two options for getting this merged:
>
> 1)   I'll take the whole lot through tip/irq/core
>
> 2)   I'll apply patch 1/N to a special branch in tip. That branch will contain
>      only this commit on top of 4.16-rc4 and can be pulled by the relevant
>      architecture maintainers, so they can apply their architecture specific
>      patches.

Option 1 seems like the lowest overhead, as that way we don't need to sequence
the patches between multiple trees.  If all the other arch maintianers are OK
with it then that works for me.  The 0-day robot found a new build warning on
openrisc.  I was plannning on submitting a v4 with this fix in it

    diff --git a/arch/openrisc/include/asm/irq.h b/arch/openrisc/include/asm/irq.h
    index d9eee0a2b7b4..eb612b1865d2 100644
    --- a/arch/openrisc/include/asm/irq.h
    +++ b/arch/openrisc/include/asm/irq.h
    @@ -24,6 +24,4 @@
    
     #define NO_IRQ         (-1)
    
    -extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
    -
     #endif /* __ASM_OPENRISC_IRQ_H__ */

I can submit a v4, or you can just grab it from

    https://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux.git/log/?h=review-irq-1-cleanup

Thanks!

Re: Make set_handle_irq and handle_arch_irq generic, v3

[Thomas Gleixner]

On Fri, 9 Mar 2018, Palmer Dabbelt wrote:
> On Fri, 09 Mar 2018 02:20:12 PST (-0800), tglx@linutronix.de wrote:
> > This looks sensible. We have two options for getting this merged:
> > 
> > 1)   I'll take the whole lot through tip/irq/core
> > 
> > 2)   I'll apply patch 1/N to a special branch in tip. That branch will
> > contain
> >      only this commit on top of 4.16-rc4 and can be pulled by the relevant
> >      architecture maintainers, so they can apply their architecture specific
> >      patches.
> 
> Option 1 seems like the lowest overhead, as that way we don't need to sequence
> the patches between multiple trees.  If all the other arch maintianers are OK
> with it then that works for me.

Ok, I wait for someone to yell NO until tuesday. If that doesn't happen I
pick it up.

> The 0-day robot found a new build warning on openrisc.  I was plannning
> on submitting a v4 with this fix in it
>
>    diff --git a/arch/openrisc/include/asm/irq.h
> b/arch/openrisc/include/asm/irq.h
>    index d9eee0a2b7b4..eb612b1865d2 100644
>    --- a/arch/openrisc/include/asm/irq.h
>    +++ b/arch/openrisc/include/asm/irq.h
>    @@ -24,6 +24,4 @@
>        #define NO_IRQ         (-1)
>       -extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
>    -
>     #endif /* __ASM_OPENRISC_IRQ_H__ */
> 
> I can submit a v4, or you can just grab it from

Just reply on the v3 openrisc patch with a v4 and I grab it from there.

Thanks,

	tglx

Re: Make set_handle_irq and handle_arch_irq generic, v3

[Palmer Dabbelt]

On Fri, 09 Mar 2018 15:00:56 PST (-0800), tglx@linutronix.de wrote:
> On Fri, 9 Mar 2018, Palmer Dabbelt wrote:
>> On Fri, 09 Mar 2018 02:20:12 PST (-0800), tglx@linutronix.de wrote:
>> > This looks sensible. We have two options for getting this merged:
>> >
>> > 1)   I'll take the whole lot through tip/irq/core
>> >
>> > 2)   I'll apply patch 1/N to a special branch in tip. That branch will
>> > contain
>> >      only this commit on top of 4.16-rc4 and can be pulled by the relevant
>> >      architecture maintainers, so they can apply their architecture specific
>> >      patches.
>>
>> Option 1 seems like the lowest overhead, as that way we don't need to sequence
>> the patches between multiple trees.  If all the other arch maintianers are OK
>> with it then that works for me.
>
> Ok, I wait for someone to yell NO until tuesday. If that doesn't happen I
> pick it up.
>
>> The 0-day robot found a new build warning on openrisc.  I was plannning
>> on submitting a v4 with this fix in it
>>
>>    diff --git a/arch/openrisc/include/asm/irq.h
>> b/arch/openrisc/include/asm/irq.h
>>    index d9eee0a2b7b4..eb612b1865d2 100644
>>    --- a/arch/openrisc/include/asm/irq.h
>>    +++ b/arch/openrisc/include/asm/irq.h
>>    @@ -24,6 +24,4 @@
>>        #define NO_IRQ         (-1)
>>       -extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
>>    -
>>     #endif /* __ASM_OPENRISC_IRQ_H__ */
>>
>> I can submit a v4, or you can just grab it from
>
> Just reply on the v3 openrisc patch with a v4 and I grab it from there.

OK, I just did -- sorry it took a while, I had to prepare for the ELC
hackathon.

[PATCH 3/5] arm64: Use the new GENERIC_IRQ_MULTI_HANDLER

[Palmer Dabbelt]

It appears arm64 copied arm's GENERIC_IRQ_MULTI_HANDLER code, but made
it unconditional.  I wanted to make this generic so it could be used by
the RISC-V port.  This patch converts the arm64 code to use the new
generic code, which simply consists of deleting the arm64 code and
setting MULTI_IRQ_HANDLER instead.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
---
 arch/arm64/Kconfig           |  4 +---
 arch/arm64/include/asm/irq.h |  2 --
 arch/arm64/kernel/irq.c      | 10 ----------
 3 files changed, 1 insertion(+), 15 deletions(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 42c090cf0292..3d1011957823 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -74,6 +74,7 @@ config ARM64
 	select GENERIC_CPU_AUTOPROBE
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IDLE_POLL_SETUP
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
@@ -264,9 +265,6 @@ config ARCH_SUPPORTS_UPROBES
 config ARCH_PROC_KCORE_TEXT
 	def_bool y
 
-config MULTI_IRQ_HANDLER
-	def_bool y
-
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
diff --git a/arch/arm64/include/asm/irq.h b/arch/arm64/include/asm/irq.h
index a0fee6985e6a..b2b0c6405eb0 100644
--- a/arch/arm64/include/asm/irq.h
+++ b/arch/arm64/include/asm/irq.h
@@ -8,8 +8,6 @@
 
 struct pt_regs;
 
-extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
-
 static inline int nr_legacy_irqs(void)
 {
 	return 0;
diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
index 60e5fc661f74..780a12f59a8f 100644
--- a/arch/arm64/kernel/irq.c
+++ b/arch/arm64/kernel/irq.c
@@ -42,16 +42,6 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 	return 0;
 }
 
-void (*handle_arch_irq)(struct pt_regs *) = NULL;
-
-void __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
-{
-	if (handle_arch_irq)
-		return;
-
-	handle_arch_irq = handle_irq;
-}
-
 #ifdef CONFIG_VMAP_STACK
 static void init_irq_stacks(void)
 {
-- 
2.16.4

[tip:irq/core] arm64: Use the new GENERIC_IRQ_MULTI_HANDLER

[tip-bot for Palmer Dabbelt]

Commit-ID:  78ae2e1cd845480caaa2f181fee64e51f679f5aa
Gitweb:     https://git.kernel.org/tip/78ae2e1cd845480caaa2f181fee64e51f679f5aa
Author:     Palmer Dabbelt <palmer@sifive.com>
AuthorDate: Fri, 22 Jun 2018 10:01:24 -0700
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Fri, 3 Aug 2018 12:14:09 +0200

arm64: Use the new GENERIC_IRQ_MULTI_HANDLER

It appears arm64 copied arm's GENERIC_IRQ_MULTI_HANDLER code, but made
it unconditional.

Converts the arm64 code to use the new generic code, which simply consists
of deleting the arm64 code and setting MULTI_IRQ_HANDLER instead.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: linux@armlinux.org.uk
Cc: catalin.marinas@arm.com
Cc: Will Deacon <will.deacon@arm.com>
Cc: jonas@southpole.se
Cc: stefan.kristiansson@saunalahti.fi
Cc: shorne@gmail.com
Cc: jason@lakedaemon.net
Cc: marc.zyngier@arm.com
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: nicolas.pitre@linaro.org
Cc: vladimir.murzin@arm.com
Cc: keescook@chromium.org
Cc: jinb.park7@gmail.com
Cc: yamada.masahiro@socionext.com
Cc: alexandre.belloni@bootlin.com
Cc: pombredanne@nexb.com
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: kstewart@linuxfoundation.org
Cc: jhogan@kernel.org
Cc: mark.rutland@arm.com
Cc: ard.biesheuvel@linaro.org
Cc: james.morse@arm.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: openrisc@lists.librecores.org
Link: https://lkml.kernel.org/r/20180622170126.6308-4-palmer@sifive.com

---
 arch/arm64/Kconfig           |  4 +---
 arch/arm64/include/asm/irq.h |  2 --
 arch/arm64/kernel/irq.c      | 10 ----------
 3 files changed, 1 insertion(+), 15 deletions(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 42c090cf0292..3d1011957823 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -74,6 +74,7 @@ config ARM64
 	select GENERIC_CPU_AUTOPROBE
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IDLE_POLL_SETUP
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
@@ -264,9 +265,6 @@ config ARCH_SUPPORTS_UPROBES
 config ARCH_PROC_KCORE_TEXT
 	def_bool y
 
-config MULTI_IRQ_HANDLER
-	def_bool y
-
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
diff --git a/arch/arm64/include/asm/irq.h b/arch/arm64/include/asm/irq.h
index a0fee6985e6a..b2b0c6405eb0 100644
--- a/arch/arm64/include/asm/irq.h
+++ b/arch/arm64/include/asm/irq.h
@@ -8,8 +8,6 @@
 
 struct pt_regs;
 
-extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
-
 static inline int nr_legacy_irqs(void)
 {
 	return 0;
diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
index 60e5fc661f74..780a12f59a8f 100644
--- a/arch/arm64/kernel/irq.c
+++ b/arch/arm64/kernel/irq.c
@@ -42,16 +42,6 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 	return 0;
 }
 
-void (*handle_arch_irq)(struct pt_regs *) = NULL;
-
-void __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
-{
-	if (handle_arch_irq)
-		return;
-
-	handle_arch_irq = handle_irq;
-}
-
 #ifdef CONFIG_VMAP_STACK
 static void init_irq_stacks(void)
 {