From: tip-bot for Borislav Petkov <borislav.petkov@amd.com>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@redhat.com,
tglx@linutronix.de, mingo@elte.hu, borislav.petkov@amd.com
Subject: [tip:perf/mce] mce, edac: Use an atomic notifier for MCEs decoding
Date: Fri, 16 Oct 2009 12:55:19 GMT [thread overview]
Message-ID: <tip-fb2531953fd8855abdcf458459020fd382c5deca@git.kernel.org> (raw)
In-Reply-To: <20091003065752.GA8935@liondog.tnic>
Commit-ID: fb2531953fd8855abdcf458459020fd382c5deca
Gitweb: http://git.kernel.org/tip/fb2531953fd8855abdcf458459020fd382c5deca
Author: Borislav Petkov <borislav.petkov@amd.com>
AuthorDate: Wed, 7 Oct 2009 13:20:38 +0200
Committer: Ingo Molnar <mingo@elte.hu>
CommitDate: Mon, 12 Oct 2009 12:24:45 +0200
mce, edac: Use an atomic notifier for MCEs decoding
Add an atomic notifier which ensures proper locking when conveying
MCE info to EDAC for decoding. The actual notifier call overrides a
default, negative priority notifier.
Note: make sure we register the default decoder only once since
mcheck_init() runs on each CPU.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <20091003065752.GA8935@liondog.tnic>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
arch/x86/include/asm/mce.h | 3 ++-
arch/x86/kernel/cpu/mcheck/mce.c | 29 ++++++++++++++++++++---------
drivers/edac/edac_mce_amd.c | 21 ++++++++++++---------
3 files changed, 34 insertions(+), 19 deletions(-)
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index f1363b7..227a72d 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -108,6 +108,8 @@ struct mce_log {
#define K8_MCE_THRESHOLD_BANK_5 (MCE_THRESHOLD_BASE + 5 * 9)
#define K8_MCE_THRESHOLD_DRAM_ECC (MCE_THRESHOLD_BANK_4 + 0)
+extern struct atomic_notifier_head x86_mce_decoder_chain;
+
#ifdef __KERNEL__
#include <linux/percpu.h>
@@ -213,6 +215,5 @@ extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
void intel_init_thermal(struct cpuinfo_x86 *c);
void mce_log_therm_throt_event(__u64 status);
-
#endif /* __KERNEL__ */
#endif /* _ASM_X86_MCE_H */
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index b1598a9..15ba9c9 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -85,18 +85,26 @@ static DECLARE_WAIT_QUEUE_HEAD(mce_wait);
static DEFINE_PER_CPU(struct mce, mces_seen);
static int cpu_missing;
-static void default_decode_mce(struct mce *m)
+/*
+ * CPU/chipset specific EDAC code can register a notifier call here to print
+ * MCE errors in a human-readable form.
+ */
+ATOMIC_NOTIFIER_HEAD(x86_mce_decoder_chain);
+EXPORT_SYMBOL_GPL(x86_mce_decoder_chain);
+
+static int default_decode_mce(struct notifier_block *nb, unsigned long val,
+ void *data)
{
pr_emerg("No human readable MCE decoding support on this CPU type.\n");
pr_emerg("Run the message through 'mcelog --ascii' to decode.\n");
+
+ return NOTIFY_STOP;
}
-/*
- * CPU/chipset specific EDAC code can register a callback here to print
- * MCE errors in a human-readable form:
- */
-void (*x86_mce_decode_callback)(struct mce *m) = default_decode_mce;
-EXPORT_SYMBOL(x86_mce_decode_callback);
+static struct notifier_block mce_dec_nb = {
+ .notifier_call = default_decode_mce,
+ .priority = -1,
+};
/* MCA banks polled by the period polling timer for corrected events */
DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = {
@@ -204,9 +212,9 @@ static void print_mce(struct mce *m)
/*
* Print out human-readable details about the MCE error,
- * (if the CPU has an implementation for that):
+ * (if the CPU has an implementation for that)
*/
- x86_mce_decode_callback(m);
+ atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, m);
}
static void print_mce_head(void)
@@ -1420,6 +1428,9 @@ void __cpuinit mcheck_init(struct cpuinfo_x86 *c)
mce_cpu_features(c);
mce_init_timer();
INIT_WORK(&__get_cpu_var(mce_work), mce_process_work);
+
+ if (raw_smp_processor_id() == 0)
+ atomic_notifier_chain_register(&x86_mce_decoder_chain, &mce_dec_nb);
}
/*
diff --git a/drivers/edac/edac_mce_amd.c b/drivers/edac/edac_mce_amd.c
index 713ed7d..689cc6a 100644
--- a/drivers/edac/edac_mce_amd.c
+++ b/drivers/edac/edac_mce_amd.c
@@ -3,7 +3,6 @@
static bool report_gart_errors;
static void (*nb_bus_decoder)(int node_id, struct err_regs *regs);
-static void (*orig_mce_callback)(struct mce *m);
void amd_report_gart_errors(bool v)
{
@@ -363,8 +362,10 @@ static inline void amd_decode_err_code(unsigned int ec)
pr_warning("Huh? Unknown MCE error 0x%x\n", ec);
}
-static void amd_decode_mce(struct mce *m)
+static int amd_decode_mce(struct notifier_block *nb, unsigned long val,
+ void *data)
{
+ struct mce *m = (struct mce *)data;
struct err_regs regs;
int node, ecc;
@@ -420,20 +421,22 @@ static void amd_decode_mce(struct mce *m)
}
amd_decode_err_code(m->status & 0xffff);
+
+ return NOTIFY_STOP;
}
+static struct notifier_block amd_mce_dec_nb = {
+ .notifier_call = amd_decode_mce,
+};
+
static int __init mce_amd_init(void)
{
/*
* We can decode MCEs for Opteron and later CPUs:
*/
if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
- (boot_cpu_data.x86 >= 0xf)) {
- /* safe the default decode mce callback */
- orig_mce_callback = x86_mce_decode_callback;
-
- x86_mce_decode_callback = amd_decode_mce;
- }
+ (boot_cpu_data.x86 >= 0xf))
+ atomic_notifier_chain_register(&x86_mce_decoder_chain, &amd_mce_dec_nb);
return 0;
}
@@ -442,7 +445,7 @@ early_initcall(mce_amd_init);
#ifdef MODULE
static void __exit mce_amd_exit(void)
{
- x86_mce_decode_callback = orig_mce_callback;
+ atomic_notifier_chain_unregister(&x86_mce_decoder_chain, &amd_mce_dec_nb);
}
MODULE_DESCRIPTION("AMD MCE decoder");
next prev parent reply other threads:[~2009-10-16 12:56 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-30 14:09 x86: mce: Please revert 22223c9b417be5fd0ab2cf9ad17eb7bd1e19f7b9 Andi Kleen
2009-09-30 19:40 ` Borislav Petkov
2009-09-30 20:46 ` Ingo Molnar
2009-09-30 21:48 ` Ingo Molnar
2009-09-30 22:39 ` Borislav Petkov
2009-09-30 23:09 ` Ingo Molnar
2009-10-01 14:14 ` Borislav Petkov
2009-10-01 14:34 ` Linus Torvalds
2009-10-01 14:46 ` Borislav Petkov
2009-10-01 15:00 ` Ingo Molnar
2009-10-01 15:21 ` Borislav Petkov
2009-10-01 15:32 ` Ingo Molnar
2009-10-02 13:21 ` Borislav Petkov
2009-10-02 13:22 ` [PATCH 1/3] x86, mce, edac: Fix MCE decoding callback logic Borislav Petkov
2009-10-02 13:23 ` [PATCH 2/3] initcalls: add early_initcall for modules Borislav Petkov
2009-10-02 14:01 ` [tip:x86/urgent] initcalls: Add early_initcall() " tip-bot for Borislav Petkov
2009-10-02 13:26 ` x86: mce: Please revert 22223c9b417be5fd0ab2cf9ad17eb7bd1e19f7b9 Ingo Molnar
2009-10-02 13:31 ` [PATCH 3/3] EDAC: carve out AMD MCE decoding logic Borislav Petkov
2009-10-02 13:39 ` Ingo Molnar
2009-10-02 18:26 ` Borislav Petkov
2009-10-02 18:47 ` Ingo Molnar
2009-10-03 6:57 ` Borislav Petkov
2009-10-03 7:18 ` Ingo Molnar
2009-10-05 15:15 ` Borislav Petkov
2009-10-16 12:55 ` tip-bot for Borislav Petkov [this message]
2009-10-02 14:01 ` [tip:x86/urgent] x86: " tip-bot for Borislav Petkov
2009-10-01 14:55 ` x86: mce: Please revert 22223c9b417be5fd0ab2cf9ad17eb7bd1e19f7b9 Ingo Molnar
2009-10-01 15:26 ` Andi Kleen
2009-10-02 14:01 ` [tip:x86/urgent] x86: EDAC: MCE: Fix MCE decoding callback logic tip-bot for Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-fb2531953fd8855abdcf458459020fd382c5deca@git.kernel.org \
--to=borislav.petkov@amd.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox