* dl2k HostError
@ 1970-01-01 11:02 Carl
0 siblings, 0 replies; 2+ messages in thread
From: Carl @ 1970-01-01 11:02 UTC (permalink / raw)
To: linux-kernel
Hi
we have 2 nearly identical servers each with the D-Link DGE-550T
Adapter, one has no problems, the other constantly reports the error
below:
D-Link DL2000-based linux driver v1.08 2002/01/17
eth2: D-Link DGE-550T Gigabit Ethernet Adapter, 00:05:5d:f9:2b:8a, IRQ 9
Auto 1000 Mbps, Full duplex
Enable Tx Flow Control
Enable Rx Flow Control
eth2: HostError! IntStatus 0002.
we have tried the driver at 100Mbps half & full duplex, with & without
Flow controls
and we have also tried the 1.04 (2.4.17) and the RH 7.2 stock kernel
(its "PCI Error! IntStatus 0002" with the older drivers)
we have several other card in the machine, such as an Adaptec 2100A raid
5 card and a 3c980 Nic, these are fine
to be honest Im not sure if this is a pci bus problem or a driver one.
is there any other information that would help?
any commentsor pointers would be a great help
TIA
Cheers carl
carl@e2-media.co.nz
^ permalink raw reply [flat|nested] 2+ messages in thread
* dl2k HostError
@ 2002-01-31 17:02 Carl Bowden
0 siblings, 0 replies; 2+ messages in thread
From: Carl Bowden @ 2002-01-31 17:02 UTC (permalink / raw)
To: linux-kernel
Hi
we have 2 nearly identical servers each with the D-Link
DGE-550T Adapter, one has no problems, the other constantly
reports the error below:
D-Link DL2000-based linux driver v1.08 2002/01/17
eth2: D-Link DGE-550T Gigabit Ethernet Adapter,
00:05:5d:f9:2b:8a, IRQ 9
Auto 1000 Mbps, Full duplex
Enable Tx Flow Control
Enable Rx Flow Control
eth2: HostError! IntStatus 0002.
we have tried the driver at 100Mbps half & full duplex,
with & without Flow controls
and we have also tried the 1.04 (2.4.17) and the RH 7.2
stock kernel (its "PCI Error! IntStatus 0002" with the older
drivers)
we have several other card in the machine, such as an
Adaptec 2100A raid 5 card and a 3c980 Nic, these are fine
to be honest Im not sure if this is a pci bus problem or a
driver one.
is there any other information that would help?
any commentsor pointers would be a great help
TIA
Cheers carl
carl@e2-media.co.nz
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-01-31 20:02 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-01-31 17:02 dl2k HostError Carl Bowden
-- strict thread matches above, loose matches on Subject: below --
1970-01-01 11:02 Carl
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox