From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 31 Jan 2002 12:24:35 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 31 Jan 2002 12:24:32 -0500 Received: from [203.167.246.143] ([203.167.246.143]:63456 "EHLO mediasolutions.net.nz") by vger.kernel.org with ESMTP id ; Thu, 31 Jan 2002 12:23:22 -0500 From: "Carl Bowden" Subject: dl2k HostError To: linux-kernel@vger.kernel.org X-Mailer: CommuniGate Pro Web Mailer v.3.4.7 Date: Fri, 01 Feb 2002 06:02:15 +1300 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi we have 2 nearly identical servers each with the D-Link DGE-550T Adapter, one has no problems, the other constantly reports the error below: D-Link DL2000-based linux driver v1.08 2002/01/17 eth2: D-Link DGE-550T Gigabit Ethernet Adapter, 00:05:5d:f9:2b:8a, IRQ 9 Auto 1000 Mbps, Full duplex Enable Tx Flow Control Enable Rx Flow Control eth2: HostError! IntStatus 0002. we have tried the driver at 100Mbps half & full duplex, with & without Flow controls and we have also tried the 1.04 (2.4.17) and the RH 7.2 stock kernel (its "PCI Error! IntStatus 0002" with the older drivers) we have several other card in the machine, such as an Adaptec 2100A raid 5 card and a 3c980 Nic, these are fine to be honest Im not sure if this is a pci bus problem or a driver one. is there any other information that would help? any commentsor pointers would be a great help TIA Cheers carl carl@e2-media.co.nz