From: "werner" <w.landgraf@ru.ru>
To: linux-kernel@vger.kernel.org
Subject: 3.5-rc6 fb hw inteldrmfb
Date: Fri, 13 Jul 2012 22:18:55 -0400 [thread overview]
Message-ID: <web-769686321@zbackend1.aha.ru> (raw)
On a computer of someone else, on which today I tried to
install 3.5-rc6 (what on my computer and on an HP pavillon
laptop runs without problem - on the laptop however needs
ircpoll otherwhise don't find the harddisk), few seconds
after start booting it sticks and don't continue longer
(reboot not possible with Ctr-Alt-C but only pressing the
reboot button), the last message is: "conflicting fb hw
usage inteldrmfb vs VESA VGA - removing generic driver"
then the cursor stops blinking, and the computer
sticks.
With 3.4 the same computer runs since weeks without
problems. So, that's a regression.
Inspection of syslog, messages, debug don't show anything
from this boot, it seems before the crash it hasn't nor
time to log something.
Below is the lspci of that computer.
wl
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL
Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation
82945G/GZ Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7
Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family)
PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family)
PCI Express Port 2 (rev 01)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family)
PCI Express Port 3 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family)
PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7
Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7
Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7
Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7
Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7
Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge
(rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7
Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7
Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH
(ICH7 Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family)
SMBus Controller (rev 01)
05:00.0 Ethernet controller: Broadcom Corporation
NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
---
Professional hosting for everyone - http://www.host.ru
next reply other threads:[~2012-07-14 2:19 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-14 2:18 werner [this message]
2012-07-14 3:23 ` 3.5-rc6 fb hw inteldrmfb Dave Airlie
2012-07-14 9:10 ` Daniel Vetter
-- strict thread matches above, loose matches on Subject: below --
2012-07-14 11:33 werner
2012-07-14 12:33 werner
2012-07-14 12:51 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=web-769686321@zbackend1.aha.ru \
--to=w.landgraf@ru.ru \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox