From: "Gabor Z. Papp" <gzp@papp.hu>
To: linux-kernel@vger.kernel.org, linux-aacraid-devel@dell.com
Subject: 2.4 and aacraid dmesg
Date: Tue, 21 Jun 2005 19:45:04 +0200 [thread overview]
Message-ID: <x64qbrvc2n@gzp> (raw)
Is this
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
repeated kernel message okay for so many times?
Linux version 2.4.31 (root@gzp) (gcc version 3.4.3) #1 Tue Jun 7 18:53:06 CEST 2005
[...]
SCSI subsystem driver Revision: 1.00
Red Hat/Adaptec aacraid driver (1.1-3 Jun 7 2005 18:53:28)
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
AAC0: kernel 4.2.4 build 7349
AAC0: monitor 4.2.4 build 7349
AAC0: bios 4.2.0 build 7349
AAC0: serial bad0fafaf001
AAC0: Non-DASD support enabled
spurious 8259A interrupt: IRQ7.
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
PCI: Found IRQ 4 for device 03:0d.0
PCI: Sharing IRQ 4 with 03:09.0
scsi0 : aacraid
Vendor: ADAPTEC Model: Adaptec Mirror Rev: V1.0
Type: Direct-Access ANSI SCSI revision: 02
lspci not very informative about the card:
03:0d.0 RAID bus controller: Adaptec AAC-RAID (rev 01)
Its an Adaptec 2120S pci raid controller.
next reply other threads:[~2005-06-21 17:47 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-21 17:45 Gabor Z. Papp [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-06-22 12:20 [Fwd: 2.4 and aacraid dmesg] Salyzyn, Mark
2005-06-22 15:25 ` 2.4 and aacraid dmesg Gabor Z. Papp
2005-06-22 15:43 Salyzyn, Mark
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=x64qbrvc2n@gzp \
--to=gzp@papp.hu \
--cc=linux-aacraid-devel@dell.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox