From: Michal Nazarewicz <mina86@mina86.com>
To: "Felipe F. Tonello" <eu@felipetonello.com>, linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Felipe Balbi <balbi@kernel.org>,
Baolin Wang <baolin.wang@linaro.org>,
Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Subject: Re: [PATCH 7/9] usb: gadget: remove useless parameter in alloc_ep_req()
Date: Wed, 27 Jul 2016 22:02:22 +0200 [thread overview]
Message-ID: <xa1ty44m26k1.fsf@mina86.com> (raw)
In-Reply-To: <20160726191200.18943-8-eu@felipetonello.com>
On Tue, Jul 26 2016, Felipe F. Tonello wrote:
> This parameter was not really necessary and gadget drivers would almost always
I personally like when commit messages can be read without subject, so
perhaps:
The default_length parameter of alloc_ep_req was not …
But that’s just me.
> create an inline function to pass the same value to len and default_len.
>
> So this patch also removes duplicate code from few drivers.
>
> Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
> ---
> drivers/usb/gadget/function/f_hid.c | 10 ++--------
> drivers/usb/gadget/function/f_loopback.c | 9 +--------
> drivers/usb/gadget/function/f_midi.c | 10 ++--------
> drivers/usb/gadget/function/f_sourcesink.c | 11 ++---------
> drivers/usb/gadget/u_f.c | 7 +++----
> drivers/usb/gadget/u_f.h | 2 +-
> 6 files changed, 11 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
> index 51980c50546d..e82a7468252e 100644
> --- a/drivers/usb/gadget/function/f_hid.c
> +++ b/drivers/usb/gadget/function/f_hid.c
> @@ -362,12 +362,6 @@ static int f_hidg_open(struct inode *inode, struct file *fd)
> /*-------------------------------------------------------------------------*/
> /* usb_function */
>
> -static inline struct usb_request *hidg_alloc_ep_req(struct usb_ep *ep,
> - unsigned length)
> -{
> - return alloc_ep_req(ep, length, length);
> -}
> -
> static void hidg_set_report_complete(struct usb_ep *ep, struct usb_request *req)
> {
> struct f_hidg *hidg = (struct f_hidg *) req->context;
> @@ -549,8 +543,8 @@ static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
> */
> for (i = 0; i < hidg->qlen && status == 0; i++) {
> struct usb_request *req =
> - hidg_alloc_ep_req(hidg->out_ep,
> - hidg->report_length);
> + alloc_ep_req(hidg->out_ep,
> + hidg->report_length);
> if (req) {
> req->complete = hidg_set_report_complete;
> req->context = hidg;
> diff --git a/drivers/usb/gadget/function/f_loopback.c b/drivers/usb/gadget/function/f_loopback.c
> index 3a9f8f9c77bd..701ee0f11c33 100644
> --- a/drivers/usb/gadget/function/f_loopback.c
> +++ b/drivers/usb/gadget/function/f_loopback.c
> @@ -306,13 +306,6 @@ static void disable_loopback(struct f_loopback *loop)
> VDBG(cdev, "%s disabled\n", loop->function.name);
> }
>
> -static inline struct usb_request *lb_alloc_ep_req(struct usb_ep *ep, int len)
> -{
> - struct f_loopback *loop = ep->driver_data;
> -
> - return alloc_ep_req(ep, len, loop->buflen);
> -}
> -
> static int alloc_requests(struct usb_composite_dev *cdev,
> struct f_loopback *loop)
> {
> @@ -333,7 +326,7 @@ static int alloc_requests(struct usb_composite_dev *cdev,
> if (!in_req)
> goto fail;
>
> - out_req = lb_alloc_ep_req(loop->out_ep, 0);
> + out_req = alloc_ep_req(loop->out_ep, loop->buflen);
> if (!out_req)
> goto fail_in;
>
> diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c
> index 3a47596afcab..abf26364b46f 100644
> --- a/drivers/usb/gadget/function/f_midi.c
> +++ b/drivers/usb/gadget/function/f_midi.c
> @@ -208,12 +208,6 @@ static struct usb_gadget_strings *midi_strings[] = {
> NULL,
> };
>
> -static inline struct usb_request *midi_alloc_ep_req(struct usb_ep *ep,
> - unsigned length)
> -{
> - return alloc_ep_req(ep, length, length);
> -}
> -
> static const uint8_t f_midi_cin_length[] = {
> 0, 0, 2, 3, 3, 1, 2, 3, 3, 3, 3, 3, 2, 2, 3, 1
> };
> @@ -365,7 +359,7 @@ static int f_midi_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
> /* pre-allocate write usb requests to use on f_midi_transmit. */
> while (kfifo_avail(&midi->in_req_fifo)) {
> struct usb_request *req =
> - midi_alloc_ep_req(midi->in_ep, midi->buflen);
> + alloc_ep_req(midi->in_ep, midi->buflen);
>
> if (req == NULL)
> return -ENOMEM;
> @@ -379,7 +373,7 @@ static int f_midi_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
> /* allocate a bunch of read buffers and queue them all at once. */
> for (i = 0; i < midi->qlen && err == 0; i++) {
> struct usb_request *req =
> - midi_alloc_ep_req(midi->out_ep, midi->buflen);
> + alloc_ep_req(midi->out_ep, midi->buflen);
>
> if (req == NULL)
> return -ENOMEM;
> diff --git a/drivers/usb/gadget/function/f_sourcesink.c b/drivers/usb/gadget/function/f_sourcesink.c
> index df0189ddfdd5..517d78d6da78 100644
> --- a/drivers/usb/gadget/function/f_sourcesink.c
> +++ b/drivers/usb/gadget/function/f_sourcesink.c
> @@ -291,13 +291,6 @@ static struct usb_gadget_strings *sourcesink_strings[] = {
>
> /*-------------------------------------------------------------------------*/
>
> -static inline struct usb_request *ss_alloc_ep_req(struct usb_ep *ep, int len)
> -{
> - struct f_sourcesink *ss = ep->driver_data;
> -
> - return alloc_ep_req(ep, len, ss->buflen);
> -}
> -
> static void disable_ep(struct usb_composite_dev *cdev, struct usb_ep *ep)
> {
> int value;
> @@ -606,11 +599,11 @@ static int source_sink_start_ep(struct f_sourcesink *ss, bool is_in,
> } else {
> ep = is_in ? ss->in_ep : ss->out_ep;
> qlen = ss->bulk_qlen;
> - size = 0;
> + size = ss->buflen;
> }
>
> for (i = 0; i < qlen; i++) {
> - req = ss_alloc_ep_req(ep, size);
> + req = alloc_ep_req(ep, size);
> if (!req)
> return -ENOMEM;
>
> diff --git a/drivers/usb/gadget/u_f.c b/drivers/usb/gadget/u_f.c
> index d1933b0b76c3..dfc40f7155ac 100644
> --- a/drivers/usb/gadget/u_f.c
> +++ b/drivers/usb/gadget/u_f.c
> @@ -14,15 +14,14 @@
> #include "u_f.h"
> #include <linux/usb/ch9.h>
>
> -struct usb_request *alloc_ep_req(struct usb_ep *ep, int len, int default_len)
> +struct usb_request *alloc_ep_req(struct usb_ep *ep, size_t len)
> {
> struct usb_request *req;
>
> req = usb_ep_alloc_request(ep, GFP_ATOMIC);
> if (req) {
> - req->length = len ?: default_len;
> - if (usb_endpoint_dir_out(ep->desc))
> - req->length = usb_ep_align(ep, req->length);
> + req->length = usb_endpoint_dir_out(ep->desc) ?
> + usb_ep_align(ep, req->length) : len;
> req->buf = kmalloc(req->length, GFP_ATOMIC);
> if (!req->buf) {
> usb_ep_free_request(ep, req);
> diff --git a/drivers/usb/gadget/u_f.h b/drivers/usb/gadget/u_f.h
> index 4247cc098a89..2852c9d7a85d 100644
> --- a/drivers/usb/gadget/u_f.h
> +++ b/drivers/usb/gadget/u_f.h
> @@ -48,7 +48,7 @@ struct usb_ep;
> struct usb_request;
>
> /* Requests allocated via alloc_ep_req() must be freed by free_ep_req(). */
> -struct usb_request *alloc_ep_req(struct usb_ep *ep, int len, int default_len);
> +struct usb_request *alloc_ep_req(struct usb_ep *ep, size_t len);
> static inline void free_ep_req(struct usb_ep *ep, struct usb_request *req)
> {
> kfree(req->buf);
> --
> 2.9.0
>
--
Best regards
ミハウ “𝓶𝓲𝓷𝓪86” ナザレヴイツ
«If at first you don’t succeed, give up skydiving»
next prev parent reply other threads:[~2016-07-27 20:02 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-26 19:11 [PATCH v2 0/9] Gadget endpoint request allocation and MIDI Felipe F. Tonello
2016-07-26 19:11 ` [PATCH 1/9] usb: gadget: fix usb_ep_align_maybe endianness and new usb_ep_align Felipe F. Tonello
2016-07-27 19:37 ` Michal Nazarewicz
2016-08-02 15:05 ` Felipe Ferreri Tonello
2016-07-26 19:11 ` [PATCH 2/9] usb: gadget: align buffer size when allocating for OUT endpoint Felipe F. Tonello
2016-07-27 19:59 ` Michal Nazarewicz
2016-08-02 15:15 ` Felipe Ferreri Tonello
2016-07-26 19:11 ` [PATCH 3/9] usb: gadget: f_midi: remove alignment code " Felipe F. Tonello
2016-07-26 19:11 ` [PATCH 4/9] usb: gadget: f_midi: defaults buflen sizes to 512 Felipe F. Tonello
2016-07-27 19:38 ` Michal Nazarewicz
2016-07-26 19:11 ` [PATCH 5/9] usb: gadget: f_midi: refactor state machine Felipe F. Tonello
2016-07-26 19:11 ` [PATCH 6/9] usb: gadget: f_midi: drop substreams when disabling endpoint Felipe F. Tonello
2016-07-26 19:11 ` [PATCH 7/9] usb: gadget: remove useless parameter in alloc_ep_req() Felipe F. Tonello
2016-07-26 19:18 ` [PATCH v2 " Felipe F. Tonello
2016-07-26 19:19 ` Felipe Ferreri Tonello
2016-07-27 20:02 ` Michal Nazarewicz [this message]
2016-08-02 15:08 ` [PATCH " Felipe Ferreri Tonello
2016-07-26 19:11 ` [PATCH 8/9] usb: gadget: f_hid: use free_ep_req() Felipe F. Tonello
2016-07-27 20:03 ` Michal Nazarewicz
2016-07-26 19:12 ` [PATCH 9/9] usb: gadget: f_hid: use alloc_ep_req() Felipe F. Tonello
2016-07-27 20:34 ` Michal Nazarewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=xa1ty44m26k1.fsf@mina86.com \
--to=mina86@mina86.com \
--cc=andrzej.p@samsung.com \
--cc=balbi@kernel.org \
--cc=baolin.wang@linaro.org \
--cc=eu@felipetonello.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox