[PATCH v2 0/2] virtio_scsi: Set can_queue based on size of virtqueue.

[PATCH v2 0/2] virtio_scsi: Set can_queue based on size of virtqueue.

[Richard W.M. Jones]

v1 was here:

  https://lkml.org/lkml/2017/8/10/689

v1 -> v2:

  Remove .can_queue field from the templates.

Rich.

[PATCH v2 1/2] virtio: Reduce BUG if total_sg > virtqueue size to WARN.

[Richard W.M. Jones]

If using indirect descriptors, you can make the total_sg as large as
you want.  If not, BUG is too serious because the function later
returns -ENOSPC.

Thanks Paolo Bonzini, Christoph Hellwig.

Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
---
 drivers/virtio/virtio_ring.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 5e1b548828e6..27cbc1eab868 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -296,7 +296,6 @@ static inline int virtqueue_add(struct virtqueue *_vq,
 	}
 #endif
 
-	BUG_ON(total_sg > vq->vring.num);
 	BUG_ON(total_sg == 0);
 
 	head = vq->free_head;
@@ -305,8 +304,10 @@ static inline int virtqueue_add(struct virtqueue *_vq,
 	 * buffers, then go indirect. FIXME: tune this threshold */
 	if (vq->indirect && total_sg > 1 && vq->vq.num_free)
 		desc = alloc_indirect(_vq, total_sg, gfp);
-	else
+	else {
 		desc = NULL;
+		WARN_ON_ONCE(total_sg > vq->vring.num && !vq->indirect);
+	}
 
 	if (desc) {
 		/* Use a single buffer which doesn't continue */
-- 
2.13.1

[PATCH v2 2/2] virtio: virtio_scsi: Set can_queue to the length of the virtqueue.

[Richard W.M. Jones]

Since switching to blk-mq as the default in commit 5c279bd9e406
("scsi: default to scsi-mq"), virtio-scsi LUNs consume about 10x as
much kernel memory.

qemu currently allocates a fixed 128 entry virtqueue.  can_queue
currently is set to 1024.  But with indirect descriptors, each command
in the queue takes 1 virtqueue entry, so the number of commands which
can be queued is equal to the length of the virtqueue.

Note I intend to send a patch to qemu to allow the virtqueue size to
be configured from the qemu command line.

Thanks Paolo Bonzini, Christoph Hellwig.

Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
---
 drivers/scsi/virtio_scsi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
index 9be211d68b15..7c28e8d4955a 100644
--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -818,7 +818,6 @@ static struct scsi_host_template virtscsi_host_template_single = {
 	.eh_timed_out = virtscsi_eh_timed_out,
 	.slave_alloc = virtscsi_device_alloc,
 
-	.can_queue = 1024,
 	.dma_boundary = UINT_MAX,
 	.use_clustering = ENABLE_CLUSTERING,
 	.target_alloc = virtscsi_target_alloc,
@@ -839,7 +838,6 @@ static struct scsi_host_template virtscsi_host_template_multi = {
 	.eh_timed_out = virtscsi_eh_timed_out,
 	.slave_alloc = virtscsi_device_alloc,
 
-	.can_queue = 1024,
 	.dma_boundary = UINT_MAX,
 	.use_clustering = ENABLE_CLUSTERING,
 	.target_alloc = virtscsi_target_alloc,
@@ -972,6 +970,8 @@ static int virtscsi_probe(struct virtio_device *vdev)
 	if (err)
 		goto virtscsi_init_failed;
 
+	shost->can_queue = virtqueue_get_vring_size(vscsi->req_vqs[0].vq);
+
 	cmd_per_lun = virtscsi_config_get(vdev, cmd_per_lun) ?: 1;
 	shost->cmd_per_lun = min_t(u32, cmd_per_lun, shost->can_queue);
 	shost->max_sectors = virtscsi_config_get(vdev, max_sectors) ?: 0xFFFF;
-- 
2.13.1

Re: [PATCH v2 2/2] virtio: virtio_scsi: Set can_queue to the length of the virtqueue.

[Paolo Bonzini]

On 10/08/2017 18:56, Richard W.M. Jones wrote:
> Since switching to blk-mq as the default in commit 5c279bd9e406
> ("scsi: default to scsi-mq"), virtio-scsi LUNs consume about 10x as
> much kernel memory.
> 
> qemu currently allocates a fixed 128 entry virtqueue.  can_queue
> currently is set to 1024.  But with indirect descriptors, each command
> in the queue takes 1 virtqueue entry, so the number of commands which
> can be queued is equal to the length of the virtqueue.
> 
> Note I intend to send a patch to qemu to allow the virtqueue size to
> be configured from the qemu command line.
> 
> Thanks Paolo Bonzini, Christoph Hellwig.
> 
> Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
> ---
>  drivers/scsi/virtio_scsi.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
> index 9be211d68b15..7c28e8d4955a 100644
> --- a/drivers/scsi/virtio_scsi.c
> +++ b/drivers/scsi/virtio_scsi.c
> @@ -818,7 +818,6 @@ static struct scsi_host_template virtscsi_host_template_single = {
>  	.eh_timed_out = virtscsi_eh_timed_out,
>  	.slave_alloc = virtscsi_device_alloc,
>  
> -	.can_queue = 1024,
>  	.dma_boundary = UINT_MAX,
>  	.use_clustering = ENABLE_CLUSTERING,
>  	.target_alloc = virtscsi_target_alloc,
> @@ -839,7 +838,6 @@ static struct scsi_host_template virtscsi_host_template_multi = {
>  	.eh_timed_out = virtscsi_eh_timed_out,
>  	.slave_alloc = virtscsi_device_alloc,
>  
> -	.can_queue = 1024,
>  	.dma_boundary = UINT_MAX,
>  	.use_clustering = ENABLE_CLUSTERING,
>  	.target_alloc = virtscsi_target_alloc,
> @@ -972,6 +970,8 @@ static int virtscsi_probe(struct virtio_device *vdev)
>  	if (err)
>  		goto virtscsi_init_failed;
>  
> +	shost->can_queue = virtqueue_get_vring_size(vscsi->req_vqs[0].vq);
> +
>  	cmd_per_lun = virtscsi_config_get(vdev, cmd_per_lun) ?: 1;
>  	shost->cmd_per_lun = min_t(u32, cmd_per_lun, shost->can_queue);
>  	shost->max_sectors = virtscsi_config_get(vdev, max_sectors) ?: 0xFFFF;
> 

Acked-by: Paolo Bonzini <pbonzini@redhat.com>

Re: [PATCH v2 0/2] virtio_scsi: Set can_queue based on size of virtqueue.

[Martin K. Petersen]

Richard,

> v1 was here:
>
>   https://lkml.org/lkml/2017/8/10/689
>
> v1 -> v2:
>
>   Remove .can_queue field from the templates.

Applied to 4.14/scsi-queue. Thank you!

-- 
Martin K. Petersen	Oracle Linux Engineering