From: mru@kth.se (Måns Rullgård)
To: linux-kernel@vger.kernel.org
Subject: Re: Slow receive with AX8817 USB2 ethernet adapter
Date: Wed, 07 Jan 2004 14:53:33 +0100 [thread overview]
Message-ID: <yw1xisjnvp9e.fsf@ford.guide> (raw)
In-Reply-To: yw1xr7ybvpv0.fsf@ford.guide
mru@kth.se (Måns Rullgård) writes:
> I'm getting very bad receive rates with a Netgear FA-120 USB2 Ethernet
> adapter under Linux 2.6.0. Timing an incoming TCP stream, I get only
> 600 kB/s. Sending works properly at 10 MB/s. I first reported this
> problem some time in July or August. Is it just me having this issue?
> Can I get any helpful information somehow?
I can add that mii-tool reports this:
eth0: negotiated 100baseTx-FD flow-control, link ok
product info: vendor 00:00:20, model 32 rev 1
basic mode: autonegotiation enabled
basic status: autonegotiation complete, link ok
capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
--
Måns Rullgård
mru@kth.se
next prev parent reply other threads:[~2004-01-07 13:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-01-07 13:40 Slow receive with AX8817 USB2 ethernet adapter Måns Rullgård
2004-01-07 13:53 ` Måns Rullgård [this message]
2004-01-07 15:54 ` David T Hollis
2004-01-07 16:13 ` David T Hollis
2004-01-07 16:57 ` Måns Rullgård
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=yw1xisjnvp9e.fsf@ford.guide \
--to=mru@kth.se \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox