From: mru@users.sourceforge.net (Måns Rullgård)
To: linux-kernel@vger.kernel.org
Subject: Re: ide cd/dvd with 2.4.19-pre8
Date: 18 May 2002 14:42:00 +0200 [thread overview]
Message-ID: <yw1xoffdhbl3.fsf@gladiusit.e.kth.se> (raw)
In-Reply-To: <Pine.LNX.4.10.10205180238160.774-100000@master.linux-ide.org>
Andre Hedrick <andre@linux-ide.org> writes:
> The driver pulled your system back into safe data io ranges.
> Either your cable routing is poor,
I use the cable that came with the controller. It runs as strait as the
box allows. How sensitive are these things really?
> your power supply is marginal, possible
It's 300 W. Isn't that enough?
> but not likely (hardware combination does not like the odd or even cable
> grounding setup), regardless it did the correct thing.
>
> The problem is a feature to prevent the driver from dropping out of DMA
> to PIO when it is better to down grade the transfer rate.
>
> The next issue is whether your ATAPI is in DMA, and it should not be.
> The driver core does not use split dma engines yet.
Was there some change from 2.4.18 to 19-pre8 in this area?
Is there any way to use the disk in udma5? Can there be compatibility
problems with the disk?
--
Måns Rullgård
mru@users.sf.net
next prev parent reply other threads:[~2002-05-18 12:42 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-05-17 18:18 ide cd/dvd with 2.4.19-pre8 Måns Rullgård
2002-05-17 19:15 ` Alan Cox
2002-05-18 9:32 ` Måns Rullgård
2002-05-18 9:43 ` Andre Hedrick
2002-05-18 12:42 ` Måns Rullgård [this message]
2002-05-18 22:09 ` G Sandine
2002-05-18 16:39 ` Måns Rullgård
2002-05-19 17:21 ` Denis Vlasenko
2002-05-19 12:48 ` Måns Rullgård
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=yw1xoffdhbl3.fsf@gladiusit.e.kth.se \
--to=mru@users.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox