From: Nancy.Lin <nancy.lin@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
CK Hu <ck.hu@mediatek.com>
Cc: Nathan Chancellor <nathan@kernel.org>,
Nick Desaulniers <ndesaulniers@google.com>,
Tom Rix <trix@redhat.com>,
"AngeloGioacchino Del Regno"
<angelogioacchino.delregno@collabora.com>,
"Jason-JH . Lin" <jason-jh.lin@mediatek.com>,
"Nancy . Lin" <nancy.lin@mediatek.com>,
"Nathan Lu" <nathan.lu@mediatek.com>,
Rex-BC Chen <rex-bc.chen@mediatek.com>,
"Xinlei Lee" <xinlei.lee@mediatek.com>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>, <llvm@lists.linux.dev>,
<singo.chang@mediatek.com>,
<Project_Global_Chrome_Upstream_Group@mediatek.com>
Subject: [PATCH v30 05/11] soc: mediatek: refine code to use mtk_mmsys_update_bits API
Date: Fri, 13 Jan 2023 18:44:28 +0800 [thread overview]
Message-ID: <20230113104434.28023-6-nancy.lin@mediatek.com> (raw)
In-Reply-To: <20230113104434.28023-1-nancy.lin@mediatek.com>
Simplify code for update mmsys reg.
Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
---
drivers/soc/mediatek/mtk-mmsys.c | 45 ++++++++++++--------------------
1 file changed, 16 insertions(+), 29 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index e75ac7f5aa3c..602197e95f67 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -107,22 +107,27 @@ struct mtk_mmsys {
struct reset_controller_dev rcdev;
};
+static void mtk_mmsys_update_bits(struct mtk_mmsys *mmsys, u32 offset, u32 mask, u32 val)
+{
+ u32 tmp;
+
+ tmp = readl_relaxed(mmsys->regs + offset);
+ tmp = (tmp & ~mask) | (val & mask);
+ writel_relaxed(tmp, mmsys->regs + offset);
+}
+
void mtk_mmsys_ddp_connect(struct device *dev,
enum mtk_ddp_comp_id cur,
enum mtk_ddp_comp_id next)
{
struct mtk_mmsys *mmsys = dev_get_drvdata(dev);
const struct mtk_mmsys_routes *routes = mmsys->data->routes;
- u32 reg;
int i;
for (i = 0; i < mmsys->data->num_routes; i++)
- if (cur == routes[i].from_comp && next == routes[i].to_comp) {
- reg = readl_relaxed(mmsys->regs + routes[i].addr);
- reg &= ~routes[i].mask;
- reg |= routes[i].val;
- writel_relaxed(reg, mmsys->regs + routes[i].addr);
- }
+ if (cur == routes[i].from_comp && next == routes[i].to_comp)
+ mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask,
+ routes[i].val);
}
EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_connect);
@@ -132,27 +137,14 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
{
struct mtk_mmsys *mmsys = dev_get_drvdata(dev);
const struct mtk_mmsys_routes *routes = mmsys->data->routes;
- u32 reg;
int i;
for (i = 0; i < mmsys->data->num_routes; i++)
- if (cur == routes[i].from_comp && next == routes[i].to_comp) {
- reg = readl_relaxed(mmsys->regs + routes[i].addr);
- reg &= ~routes[i].mask;
- writel_relaxed(reg, mmsys->regs + routes[i].addr);
- }
+ if (cur == routes[i].from_comp && next == routes[i].to_comp)
+ mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask, 0);
}
EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_disconnect);
-static void mtk_mmsys_update_bits(struct mtk_mmsys *mmsys, u32 offset, u32 mask, u32 val)
-{
- u32 tmp;
-
- tmp = readl_relaxed(mmsys->regs + offset);
- tmp = (tmp & ~mask) | val;
- writel_relaxed(tmp, mmsys->regs + offset);
-}
-
void mtk_mmsys_ddp_dpi_fmt_config(struct device *dev, u32 val)
{
struct mtk_mmsys *mmsys = dev_get_drvdata(dev);
@@ -184,18 +176,13 @@ static int mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned l
{
struct mtk_mmsys *mmsys = container_of(rcdev, struct mtk_mmsys, rcdev);
unsigned long flags;
- u32 reg;
spin_lock_irqsave(&mmsys->lock, flags);
- reg = readl_relaxed(mmsys->regs + mmsys->data->sw0_rst_offset);
-
if (assert)
- reg &= ~BIT(id);
+ mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), 0);
else
- reg |= BIT(id);
-
- writel_relaxed(reg, mmsys->regs + mmsys->data->sw0_rst_offset);
+ mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), BIT(id));
spin_unlock_irqrestore(&mmsys->lock, flags);
--
2.18.0
next prev parent reply other threads:[~2023-01-13 10:44 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-13 10:44 [PATCH v30 00/11] Add MediaTek SoC(vdosys1) support for mt8195 Nancy.Lin
2023-01-13 10:44 ` [PATCH v30 01/11] dt-bindings: arm: mediatek: mmsys: add vdosys1 compatible for MT8195 Nancy.Lin
2023-01-13 11:19 ` Krzysztof Kozlowski
2023-01-13 10:44 ` [PATCH v30 02/11] dt-bindings: reset: mt8195: add vdosys1 reset control bit Nancy.Lin
2023-01-13 10:44 ` [PATCH v30 03/11] soc: mediatek: add mtk-mmsys ethdr and mdp_rdma components Nancy.Lin
2023-01-13 10:44 ` [PATCH v30 04/11] soc: mediatek: add mtk-mmsys support for mt8195 vdosys1 Nancy.Lin
2023-01-13 10:44 ` Nancy.Lin [this message]
2023-01-13 10:44 ` [PATCH v30 06/11] soc: mediatek: add mtk-mmsys config API " Nancy.Lin
2023-01-13 10:44 ` [PATCH v30 07/11] soc: mediatek: add cmdq support of " Nancy.Lin
2023-01-13 10:44 ` [PATCH v30 08/11] soc: mediatek: mmsys: add mmsys for support 64 reset bits Nancy.Lin
2023-01-13 10:44 ` [PATCH v30 09/11] soc: mediatek: mmsys: add reset control for MT8195 vdosys1 Nancy.Lin
2023-01-13 10:44 ` [PATCH v30 10/11] soc: mediatek: add mtk-mutex component - dp_intf1 Nancy.Lin
2023-01-13 10:44 ` [PATCH v30 11/11] soc: mediatek: add mtk-mutex support for mt8195 vdosys1 Nancy.Lin
2023-01-20 11:10 ` [PATCH v30 00/11] Add MediaTek SoC(vdosys1) support for mt8195 AngeloGioacchino Del Regno
2023-01-25 15:05 ` Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230113104434.28023-6-nancy.lin@mediatek.com \
--to=nancy.lin@mediatek.com \
--cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=ck.hu@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=jason-jh.lin@mediatek.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=llvm@lists.linux.dev \
--cc=matthias.bgg@gmail.com \
--cc=nathan.lu@mediatek.com \
--cc=nathan@kernel.org \
--cc=ndesaulniers@google.com \
--cc=p.zabel@pengutronix.de \
--cc=rex-bc.chen@mediatek.com \
--cc=robh+dt@kernel.org \
--cc=singo.chang@mediatek.com \
--cc=trix@redhat.com \
--cc=xinlei.lee@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox