Re: [PATCH v23 01/14] dt-bindings: mediatek: add vdosys1 RDMA definition for mt8195

[CK Hu <ck.hu@mediatek.com>]

Hi, Rob:

You have ask Nancy question in old version and Nancy has reply in [1],
how do you think about Nancy's reply?

[1] 
http://lists.infradead.org/pipermail/linux-mediatek/2022-April/039890.html

Regards,
CK

On Mon, 2022-06-20 at 17:19 +0800, Nancy.Lin wrote:
> Add vdosys1 RDMA definition.
> 
> Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno@collabora.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Tested-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno@collabora.com>
> ---
>  .../display/mediatek/mediatek,mdp-rdma.yaml   | 88
> +++++++++++++++++++
>  1 file changed, 88 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-
> rdma.yaml
> 
> diff --git
> a/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-
> rdma.yaml
> b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-
> rdma.yaml
> new file mode 100644
> index 000000000000..dd12e2ff685c
> --- /dev/null
> +++
> b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-
> rdma.yaml
> @@ -0,0 +1,88 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: 
> https://urldefense.com/v3/__http://devicetree.org/schemas/display/mediatek/mediatek,mdp-rdma.yaml*__;Iw!!CTRNKA9wMg0ARbw!2V-LPisZwDTVUkpQ5cJnZhaUV4iBSohT_B1_8bY3yar4Iuacq_NaTManclYLSA$
>  
> +$schema: 
> https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!2V-LPisZwDTVUkpQ5cJnZhaUV4iBSohT_B1_8bY3yar4Iuacq_NaTMZYdJgbgQ$
>  
> +
> +title: MediaTek MDP RDMA
> +
> +maintainers:
> +  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
> +  - Philipp Zabel <p.zabel@pengutronix.de>
> +
> +description:
> +  The MediaTek MDP RDMA stands for Read Direct Memory Access.
> +  It provides real time data to the back-end panel driver, such as
> DSI,
> +  DPI and DP_INTF.
> +  It contains one line buffer to store the sufficient pixel data.
> +  RDMA device node must be siblings to the central MMSYS_CONFIG
> node.
> +  For a description of the MMSYS_CONFIG binding, see
> +  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
> for details.
> +
> +properties:
> +  compatible:
> +    const: mediatek,mt8195-vdo1-rdma
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: RDMA Clock
> +
> +  iommus:
> +    maxItems: 1
> +
> +  mediatek,gce-client-reg:
> +    description:
> +      The register of display function block to be set by gce. There
> are 4 arguments,
> +      such as gce node, subsys id, offset and register size. The
> subsys id that is
> +      mapping to the register of display function blocks is defined
> in the gce header
> +      include/dt-bindings/gce/<chip>-gce.h of each chips.
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    items:
> +      items:
> +        - description: phandle of GCE
> +        - description: GCE subsys id
> +        - description: register offset
> +        - description: register size
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - power-domains
> +  - clocks
> +  - iommus
> +  - mediatek,gce-client-reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/mt8195-clk.h>
> +    #include <dt-bindings/power/mt8195-power.h>
> +    #include <dt-bindings/gce/mt8195-gce.h>
> +    #include <dt-bindings/memory/mt8195-memory-port.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        rdma@1c104000 {
> +            compatible = "mediatek,mt8195-vdo1-rdma";
> +            reg = <0 0x1c104000 0 0x1000>;
> +            interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
> +            clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>;
> +            power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
> +            iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
> +            mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000
> 0x1000>;
> +        };
> +    };