From: Subrata Modak <subrata@linux.vnet.ibm.com>
To: jpalecek@web.de
Cc: ltp-list@lists.sourceforge.net
Subject: Re: [LTP] [PATCH] Fix the splice02 test
Date: Fri, 15 May 2009 12:47:36 +0530 [thread overview]
Message-ID: <1242371857.7224.13.camel@subratamodak.linux.ibm.com> (raw)
In-Reply-To: <20090513.224735.226784134.caiqian@cclom.cn>
On Wed, 2009-05-13 at 22:47 +0800, CAI Qian wrote:
> From: Jiri Palecek <jpalecek@web.de>
> Subject: [LTP] [PATCH] Fix the splice02 test
> Date: Wed, 13 May 2009 00:34:15 +0200
>
> > Particularly:
> >
> > - TEST_ERRNO is only set when the syscall is executed using the
> > TEST() macro. The tests gave bad error messages because of that.
> >
> > - The end of the test was dead code; moved the TPASS code to pass at
> > the end of file.
> >
> > - The test assumes std. input is a pipe; reflect this in the runtest
> > file
> >
> > Regards
> > Jiri Palecek
> >
> > Signed-off-by: Jiri Palecek <jpalecek@web.de>
> > ---
> > runtest/syscalls | 2 +-
> > testcases/kernel/syscalls/splice/splice02.c | 16 ++++++----------
> > 2 files changed, 7 insertions(+), 11 deletions(-)
> >
> > diff --git a/runtest/syscalls b/runtest/syscalls
> > index 9b7b2ca..33beff0 100644
> > --- a/runtest/syscalls
> > +++ b/runtest/syscalls
> > @@ -1033,7 +1033,7 @@ sockioctl01 sockioctl01
> > #splice test
> > splice01 splice01
> > -splice02 echo "Test splice02()" > splice02-temp; splice02 splice02-temp
> > +splice02 seq 1 10000000 | splice02 splice02-temp
> > tee01 tee01
> > diff --git a/testcases/kernel/syscalls/splice/splice02.c
> > b/testcases/kernel/syscalls/splice/splice02.c
> > index 321d002..16bff86 100644
> > --- a/testcases/kernel/syscalls/splice/splice02.c
> > +++ b/testcases/kernel/syscalls/splice/splice02.c
> > @@ -108,7 +108,6 @@ void setup() {
> > int main(int ac, char **av) {
> > int fd = 0;
> > - int ret = 0;
> >
> > setup();
> > @@ -118,26 +117,23 @@ int main(int ac, char **av) {
> > }
> > fd=open(av[1], O_WRONLY | O_CREAT | O_TRUNC, 0644);
> > if(fd < 0 ) {
> > - tst_resm(TFAIL, "%s failed - errno = %d : %s", TCID, TEST_ERRNO,
> > strerror(TEST_ERRNO));
> > + tst_resm(TFAIL, "open(%s) failed - errno = %d : %s", av[1], errno,
> > strerror(errno));
> > cleanup();
> > tst_exit();
> > }
> >
> > do {
> > - ret = splice(STDIN_FILENO, NULL, fd, NULL, SPLICE_SIZE, 0);
> > - if (ret < 0) {
> > - tst_resm(TFAIL, "%s failed - errno = %d : %s",TCID, TEST_ERRNO,
> > strerror(TEST_ERRNO));
> > + TEST(splice(STDIN_FILENO, NULL, fd, NULL, SPLICE_SIZE, 0));
> > + if (TEST_RETURN < 0) {
> > + tst_resm(TFAIL, "splice failed - errno = %d : %s", TEST_ERRNO,
> > strerror(TEST_ERRNO));
> > cleanup();
> > tst_exit();
> > } else
> > - if (ret < SPLICE_SIZE){
> > + if (TEST_RETURN == 0){
> > + tst_resm(TPASS, "splice() system call Passed");
> > cleanup();
> > tst_exit();
> > }
> > } while(1);
> > -
> > - close(fd);
> > - tst_resm(TPASS, "splice() system call Passed");
> > - tst_exit();
> > }
> > -- 1.6.2
>
> Can't apply this patch -- long lines are wrapped. Please re-send it.
True. Here i get:
ERROR: patch seems to be corrupt (line wrapped?)
#131: FILE: runtest/syscalls:1037:
b/testcases/kernel/syscalls/splice/splice02.c
total: 1 errors, 0 warnings, 16 lines checked
and
patching file runtest/syscalls
patch: **** malformed patch at line 131:
b/testcases/kernel/syscalls/splice/splice02.c
Regards--
Subrata
> CAI Qian
>
> ------------------------------------------------------------------------------
> The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
> production scanning environment may not be a perfect world - but thanks to
> Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
> Series Scanner you'll get full speed at 300 dpi even with all image
> processing features enabled. http://p.sf.net/sfu/kodak-com
> _______________________________________________
> Ltp-list mailing list
> Ltp-list@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/ltp-list
------------------------------------------------------------------------------
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables
unlimited royalty-free distribution of the report engine
for externally facing server and web deployment.
http://p.sf.net/sfu/businessobjects
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
next parent reply other threads:[~2009-05-15 7:18 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4A09F967.8030402@web.de>
[not found] ` <20090513.224735.226784134.caiqian@cclom.cn>
2009-05-15 7:17 ` Subrata Modak [this message]
2009-05-15 17:24 ` [LTP] [PATCH] Fix the splice02 test Jiří Paleček
2009-05-18 11:59 ` Subrata Modak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1242371857.7224.13.camel@subratamodak.linux.ibm.com \
--to=subrata@linux.vnet.ibm.com \
--cc=jpalecek@web.de \
--cc=ltp-list@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox