From: Subrata Modak <subrata@linux.vnet.ibm.com>
To: GeunSik Lim <leemgs1@gmail.com>,
Andrew Vagin <avagin@parallels.com>,
Andrew Vagin <avagin@gmail.com>
Cc: ltp-list@lists.sourceforge.net
Subject: Re: [LTP] I met "You can specify it with option -b" error message
Date: Thu, 18 Jun 2009 23:01:35 +0530 [thread overview]
Message-ID: <1245346296.5041.34.camel@subratamodak.linux.ibm.com> (raw)
In-Reply-To: <49b7c2350906120147p1a68cde1ua00b2875052ea99c@mail.gmail.com>
On Fri, 2009-06-12 at 17:47 +0900, GeunSik Lim wrote:
> Um..
>
> I met "You can specify it with option -b" error message when i tested
> my fedora system with
> LTP-20090531 version.
>
>
> Belows is screnshot..
> Anyone Help me about this problems?
>
>
>
> Linux fedora9 2.6.29-3.fc10.i686 #1 SMP Tue Mar 24 01:56:24 EDT 2009
> i686 i686 i386 GNU/Linux
>
> Gnu C gcc (GCC) 4.3.0 20080428 (Red Hat 4.3.0-8)
> Gnu make 3.81
> util-linux ng 2.13.1)
> mount ng 2.13.1)
> modutils 3.4
> e2fsprogs 1.41.3
> PPP 2.4.4
> isdn4k-utils 3.9
> Linux C Library > libc.2.8
> Dynamic linker (ldd) 2.8
> Procps 3.2.7
> Net-tools 1.60
> Kbd 1.12
> Sh-utils 6.10
> Modules Loaded vboxnetflt vboxdrv tun ipt_MASQUERADE
> iptable_nat nf_nat bridge stp nfsd lockd nfs_acl auth_rpcgss exportfs
> ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp
> libiscsi_tcp libiscsi scsi_transport_iscsi fuse sunrpc ipv6
> dm_multipath snd_hda_codec_realtek snd_hda_intel snd_hda_codec
> snd_hwdep snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq nvidia
> snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm tpm_infineon tpm e100
> ppdev snd_timer mii e1000e pcspkr snd i2c_i801 tpm_bios iTCO_wdt
> parport_pc soundcore iTCO_vendor_support parport i2c_core
> snd_page_alloc pata_acpi ata_generic
>
> free reports:
> total used free shared buffers cached
> Mem: 3080732 2567692 513040 0 610456 777264
> -/+ buffers/cache: 1179972 1900760
> Swap: 0 0 0
>
> /proc/cpuinfo
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 6
> model : 23
> model name : Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz
> stepping : 7
> cpu MHz : 2493.591
> cache size : 3072 KB
> physical id : 0
> siblings : 4
> core id : 0
> cpu cores : 4
> apicid : 0
> initial apicid : 0
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 10
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
> pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc
> arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3
> cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi flexpriority
> bogomips : 4987.18
> clflush size : 64
> power management:
>
> processor : 1
> vendor_id : GenuineIntel
> cpu family : 6
> model : 23
> model name : Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz
> stepping : 7
> cpu MHz : 2493.591
> cache size : 3072 KB
> physical id : 0
> siblings : 4
> core id : 1
> cpu cores : 4
> apicid : 1
> initial apicid : 1
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 10
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
> pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc
> arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3
> cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi flexpriority
> bogomips : 4987.48
> clflush size : 64
> power management:
>
> processor : 2
> vendor_id : GenuineIntel
> cpu family : 6
> model : 23
> model name : Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz
> stepping : 7
> cpu MHz : 2493.591
> cache size : 3072 KB
> physical id : 0
> siblings : 4
> core id : 2
> cpu cores : 4
> apicid : 2
> initial apicid : 2
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 10
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
> pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc
> arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3
> cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi flexpriority
> bogomips : 4987.49
> clflush size : 64
> power management:
>
> processor : 3
> vendor_id : GenuineIntel
> cpu family : 6
> model : 23
> model name : Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz
> stepping : 7
> cpu MHz : 2493.591
> cache size : 3072 KB
> physical id : 0
> siblings : 4
> core id : 3
> cpu cores : 4
> apicid : 3
> initial apicid : 3
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 10
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
> pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc
> arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3
> cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi flexpriority
> bogomips : 4987.49
> clflush size : 64
> power management:
>
> remove test cases which require the block device.
> You can specify it with option -b
This is not an error message at all. See this:
http://ltp.cvs.sourceforge.net/viewvc/ltp/ltp/runltp?r1=1.40&r2=1.41
Andrew would also explain you a bit.
Regards--
Subrata
> LOG File: /opt/ltp-full-20090531/results/LTP_RUN_ON-2009_ 6월_12-16h_17m_34s.log
> FAILED COMMAND File: /opt/ltp-full-20090531/output/LTP_RUN_ON-2009_.failed
> Running tests.......
>
>
>
>
> --
> Regards,
> GeunSik Lim ( Samsung Electronics )
> Blog : http://blog.naver.com/invain/
> e-Mail: geunsik.lim@samsung.com
> leemgs@gmail.com , leemgs1@gmail.com
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
> ------------------------------------------------------------------------------
> Crystal Reports - New Free Runtime and 30 Day Trial
> Check out the new simplified licensing option that enables unlimited
> royalty-free distribution of the report engine for externally facing
> server and web deployment.
> http://p.sf.net/sfu/businessobjects
> _______________________________________________
> Ltp-list mailing list
> Ltp-list@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/ltp-list
------------------------------------------------------------------------------
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables unlimited
royalty-free distribution of the report engine for externally facing
server and web deployment.
http://p.sf.net/sfu/businessobjects
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
next prev parent reply other threads:[~2009-06-18 17:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-12 8:47 [LTP] I met "You can specify it with option -b" error message GeunSik Lim
2009-06-18 17:31 ` Subrata Modak [this message]
2009-06-19 5:11 ` GeunSik Lim
2009-06-19 5:29 ` Subrata Modak
2009-06-19 7:40 ` GeunSik Lim
2009-06-23 14:50 ` Subrata Modak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1245346296.5041.34.camel@subratamodak.linux.ibm.com \
--to=subrata@linux.vnet.ibm.com \
--cc=avagin@gmail.com \
--cc=avagin@parallels.com \
--cc=leemgs1@gmail.com \
--cc=ltp-list@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox