* [LTP] I met "You can specify it with option -b" error message
@ 2009-06-12 8:47 GeunSik Lim
2009-06-18 17:31 ` Subrata Modak
0 siblings, 1 reply; 6+ messages in thread
From: GeunSik Lim @ 2009-06-12 8:47 UTC (permalink / raw)
To: ltp-list
Um..
I met "You can specify it with option -b" error message when i tested
my fedora system with
LTP-20090531 version.
Belows is screnshot..
Anyone Help me about this problems?
Linux fedora9 2.6.29-3.fc10.i686 #1 SMP Tue Mar 24 01:56:24 EDT 2009
i686 i686 i386 GNU/Linux
Gnu C gcc (GCC) 4.3.0 20080428 (Red Hat 4.3.0-8)
Gnu make 3.81
util-linux ng 2.13.1)
mount ng 2.13.1)
modutils 3.4
e2fsprogs 1.41.3
PPP 2.4.4
isdn4k-utils 3.9
Linux C Library > libc.2.8
Dynamic linker (ldd) 2.8
Procps 3.2.7
Net-tools 1.60
Kbd 1.12
Sh-utils 6.10
Modules Loaded vboxnetflt vboxdrv tun ipt_MASQUERADE
iptable_nat nf_nat bridge stp nfsd lockd nfs_acl auth_rpcgss exportfs
ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp
libiscsi_tcp libiscsi scsi_transport_iscsi fuse sunrpc ipv6
dm_multipath snd_hda_codec_realtek snd_hda_intel snd_hda_codec
snd_hwdep snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq nvidia
snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm tpm_infineon tpm e100
ppdev snd_timer mii e1000e pcspkr snd i2c_i801 tpm_bios iTCO_wdt
parport_pc soundcore iTCO_vendor_support parport i2c_core
snd_page_alloc pata_acpi ata_generic
free reports:
total used free shared buffers cached
Mem: 3080732 2567692 513040 0 610456 777264
-/+ buffers/cache: 1179972 1900760
Swap: 0 0 0
/proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz
stepping : 7
cpu MHz : 2493.591
cache size : 3072 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc
arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3
cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi flexpriority
bogomips : 4987.18
clflush size : 64
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz
stepping : 7
cpu MHz : 2493.591
cache size : 3072 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 1
initial apicid : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc
arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3
cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi flexpriority
bogomips : 4987.48
clflush size : 64
power management:
processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz
stepping : 7
cpu MHz : 2493.591
cache size : 3072 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
apicid : 2
initial apicid : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc
arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3
cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi flexpriority
bogomips : 4987.49
clflush size : 64
power management:
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz
stepping : 7
cpu MHz : 2493.591
cache size : 3072 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 3
initial apicid : 3
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc
arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3
cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi flexpriority
bogomips : 4987.49
clflush size : 64
power management:
remove test cases which require the block device.
You can specify it with option -b
LOG File: /opt/ltp-full-20090531/results/LTP_RUN_ON-2009_ 6월_12-16h_17m_34s.log
FAILED COMMAND File: /opt/ltp-full-20090531/output/LTP_RUN_ON-2009_.failed
Running tests.......
--
Regards,
GeunSik Lim ( Samsung Electronics )
Blog : http://blog.naver.com/invain/
e-Mail: geunsik.lim@samsung.com
leemgs@gmail.com , leemgs1@gmail.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
------------------------------------------------------------------------------
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables unlimited
royalty-free distribution of the report engine for externally facing
server and web deployment.
http://p.sf.net/sfu/businessobjects
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [LTP] I met "You can specify it with option -b" error message 2009-06-12 8:47 [LTP] I met "You can specify it with option -b" error message GeunSik Lim @ 2009-06-18 17:31 ` Subrata Modak 2009-06-19 5:11 ` GeunSik Lim 0 siblings, 1 reply; 6+ messages in thread From: Subrata Modak @ 2009-06-18 17:31 UTC (permalink / raw) To: GeunSik Lim, Andrew Vagin, Andrew Vagin; +Cc: ltp-list On Fri, 2009-06-12 at 17:47 +0900, GeunSik Lim wrote: > Um.. > > I met "You can specify it with option -b" error message when i tested > my fedora system with > LTP-20090531 version. > > > Belows is screnshot.. > Anyone Help me about this problems? > > > > Linux fedora9 2.6.29-3.fc10.i686 #1 SMP Tue Mar 24 01:56:24 EDT 2009 > i686 i686 i386 GNU/Linux > > Gnu C gcc (GCC) 4.3.0 20080428 (Red Hat 4.3.0-8) > Gnu make 3.81 > util-linux ng 2.13.1) > mount ng 2.13.1) > modutils 3.4 > e2fsprogs 1.41.3 > PPP 2.4.4 > isdn4k-utils 3.9 > Linux C Library > libc.2.8 > Dynamic linker (ldd) 2.8 > Procps 3.2.7 > Net-tools 1.60 > Kbd 1.12 > Sh-utils 6.10 > Modules Loaded vboxnetflt vboxdrv tun ipt_MASQUERADE > iptable_nat nf_nat bridge stp nfsd lockd nfs_acl auth_rpcgss exportfs > ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp > libiscsi_tcp libiscsi scsi_transport_iscsi fuse sunrpc ipv6 > dm_multipath snd_hda_codec_realtek snd_hda_intel snd_hda_codec > snd_hwdep snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq nvidia > snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm tpm_infineon tpm e100 > ppdev snd_timer mii e1000e pcspkr snd i2c_i801 tpm_bios iTCO_wdt > parport_pc soundcore iTCO_vendor_support parport i2c_core > snd_page_alloc pata_acpi ata_generic > > free reports: > total used free shared buffers cached > Mem: 3080732 2567692 513040 0 610456 777264 > -/+ buffers/cache: 1179972 1900760 > Swap: 0 0 0 > > /proc/cpuinfo > processor : 0 > vendor_id : GenuineIntel > cpu family : 6 > model : 23 > model name : Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz > stepping : 7 > cpu MHz : 2493.591 > cache size : 3072 KB > physical id : 0 > siblings : 4 > core id : 0 > cpu cores : 4 > apicid : 0 > initial apicid : 0 > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 10 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat > pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc > arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 > cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi flexpriority > bogomips : 4987.18 > clflush size : 64 > power management: > > processor : 1 > vendor_id : GenuineIntel > cpu family : 6 > model : 23 > model name : Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz > stepping : 7 > cpu MHz : 2493.591 > cache size : 3072 KB > physical id : 0 > siblings : 4 > core id : 1 > cpu cores : 4 > apicid : 1 > initial apicid : 1 > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 10 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat > pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc > arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 > cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi flexpriority > bogomips : 4987.48 > clflush size : 64 > power management: > > processor : 2 > vendor_id : GenuineIntel > cpu family : 6 > model : 23 > model name : Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz > stepping : 7 > cpu MHz : 2493.591 > cache size : 3072 KB > physical id : 0 > siblings : 4 > core id : 2 > cpu cores : 4 > apicid : 2 > initial apicid : 2 > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 10 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat > pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc > arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 > cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi flexpriority > bogomips : 4987.49 > clflush size : 64 > power management: > > processor : 3 > vendor_id : GenuineIntel > cpu family : 6 > model : 23 > model name : Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz > stepping : 7 > cpu MHz : 2493.591 > cache size : 3072 KB > physical id : 0 > siblings : 4 > core id : 3 > cpu cores : 4 > apicid : 3 > initial apicid : 3 > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 10 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat > pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc > arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 > cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi flexpriority > bogomips : 4987.49 > clflush size : 64 > power management: > > remove test cases which require the block device. > You can specify it with option -b This is not an error message at all. See this: http://ltp.cvs.sourceforge.net/viewvc/ltp/ltp/runltp?r1=1.40&r2=1.41 Andrew would also explain you a bit. Regards-- Subrata > LOG File: /opt/ltp-full-20090531/results/LTP_RUN_ON-2009_ 6월_12-16h_17m_34s.log > FAILED COMMAND File: /opt/ltp-full-20090531/output/LTP_RUN_ON-2009_.failed > Running tests....... > > > > > -- > Regards, > GeunSik Lim ( Samsung Electronics ) > Blog : http://blog.naver.com/invain/ > e-Mail: geunsik.lim@samsung.com > leemgs@gmail.com , leemgs1@gmail.com > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > > ------------------------------------------------------------------------------ > Crystal Reports - New Free Runtime and 30 Day Trial > Check out the new simplified licensing option that enables unlimited > royalty-free distribution of the report engine for externally facing > server and web deployment. > http://p.sf.net/sfu/businessobjects > _______________________________________________ > Ltp-list mailing list > Ltp-list@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/ltp-list ------------------------------------------------------------------------------ Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [LTP] I met "You can specify it with option -b" error message 2009-06-18 17:31 ` Subrata Modak @ 2009-06-19 5:11 ` GeunSik Lim 2009-06-19 5:29 ` Subrata Modak 0 siblings, 1 reply; 6+ messages in thread From: GeunSik Lim @ 2009-06-19 5:11 UTC (permalink / raw) To: subrata; +Cc: ltp-list, Andrew Vagin On Fri, Jun 19, 2009 at 2:31 AM, Subrata Modak<subrata@linux.vnet.ibm.com> wrote: >> remove test cases which require the block device. >> You can specify it with option -b > > This is not an error message at all. See this: > http://ltp.cvs.sourceforge.net/viewvc/ltp/ltp/runltp?r1=1.40&r2=1.41 I checked above site that you said. Thank you for sharing. I summarized result of benchmark using ltp-full-20090531. ---------------------------------------------------------------------------------------------------- Linux RootFS Linux Kernel LTP Result(Log) Result(HTML) ---------------------------------------------------------------------------------------------------- CentOS 5.3 2.6.24 20090531 Success Success Fedora 11 2.6.29 20090531 Success(with+ctrl C) Failed #> cd ltp-full-20090531 #> ./configure #> make #> make install #> time ./runalltests.sh OR time ./runltp -v -l alltest.log -o alltest.out -g alltest.html -x 4 .... No response ...... I still can't view "#>" prompt in my Fedora 11 distribution after 24hours. I don't know what is reason of this problem in Fedora 11. > > Andrew would also explain you a bit. > > Regards-- > Subrata > -- Regards, GeunSik Lim ( Samsung Electronics ) Blog : http://blog.naver.com/invain/ e-Mail: geunsik.lim@samsung.com leemgs@gmail.com , leemgs1@gmail.com -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ ------------------------------------------------------------------------------ Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [LTP] I met "You can specify it with option -b" error message 2009-06-19 5:11 ` GeunSik Lim @ 2009-06-19 5:29 ` Subrata Modak 2009-06-19 7:40 ` GeunSik Lim 0 siblings, 1 reply; 6+ messages in thread From: Subrata Modak @ 2009-06-19 5:29 UTC (permalink / raw) To: GeunSik Lim; +Cc: ltp-list, Andrew Vagin On Fri, 2009-06-19 at 14:11 +0900, GeunSik Lim wrote: > On Fri, Jun 19, 2009 at 2:31 AM, Subrata > Modak<subrata@linux.vnet.ibm.com> wrote: > >> remove test cases which require the block device. > >> You can specify it with option -b > > > > This is not an error message at all. See this: > > http://ltp.cvs.sourceforge.net/viewvc/ltp/ltp/runltp?r1=1.40&r2=1.41 > > I checked above site that you said. Thank you for sharing. > I summarized result of benchmark using ltp-full-20090531. > ---------------------------------------------------------------------------------------------------- > Linux RootFS Linux Kernel LTP Result(Log) > Result(HTML) > ---------------------------------------------------------------------------------------------------- > CentOS 5.3 2.6.24 20090531 Success > Success > Fedora 11 2.6.29 20090531 > Success(with+ctrl C) Failed > > #> cd ltp-full-20090531 > #> ./configure > #> make > #> make install > #> time ./runalltests.sh OR > time ./runltp -v -l alltest.log -o alltest.out -g alltest.html > -x 4 Because, when you use the option -o, ltp-pan will redirect all your test output to ltp/output/alltest.out. Do tail -f ltp/output/alltest.out, you will see output scrolling out. Given the size of default ltp run, you can expect somewhere from 1.5 to 2.5 hours before your command prompt returns from: time ./runltp -v -l alltest.log -o alltest.out -g alltest.html Regards-- Subrata > > .... No response ...... > > I still can't view "#>" prompt in my Fedora 11 distribution after 24hours. > I don't know what is reason of this problem in Fedora 11. > > > > > > Andrew would also explain you a bit. > > > > Regards-- > > Subrata > > > ------------------------------------------------------------------------------ Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [LTP] I met "You can specify it with option -b" error message 2009-06-19 5:29 ` Subrata Modak @ 2009-06-19 7:40 ` GeunSik Lim 2009-06-23 14:50 ` Subrata Modak 0 siblings, 1 reply; 6+ messages in thread From: GeunSik Lim @ 2009-06-19 7:40 UTC (permalink / raw) To: subrata; +Cc: ltp-list, Andrew Vagin On Fri, Jun 19, 2009 at 2:29 PM, Subrata Modak<subrata@linux.vnet.ibm.com> wrote: > > Because, when you use the option -o, ltp-pan will redirect all your test > output to ltp/output/alltest.out. Do tail -f ltp/output/alltest.out, you > will see output scrolling out. Given the size of default ltp run, you > can expect somewhere from 1.5 to 2.5 hours before your command prompt > returns from: > > time ./runltp -v -l alltest.log -o alltest.out -g alltest.html > > Regards-- > Subrata Subrata, Thanks, I got some data like belows thanks to you. paused location is mq_timedreceive01(tag) when I used "#> tail -f ./output/alltest.out" command . As I report, I can not finshed ltp test in Fedora 11 rootFS. Fedora 11 rootFS + Same Kernel + ltp-full-20090531 --> Fail Centos 5.3rootFS + Same Kernel + ltp-full-20090531 --> Success /opt/ltp-full-20090531/testcases/kernel/syscalls/mq_timedreceive/mq_timedreceive01.c #> man mq_receive, mq_timedreceive - receive a message from a message queue [root@fedora11 mq_timedreceive]# strace ./mq_timedreceive01 execve("./mq_timedreceive01", ["./mq_timedreceive01"], [/* 29 vars */]) = 0 brk(0) = 0x9564000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=125568, ...}) = 0 mmap2(NULL, 125568, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f30000 close(3) = 0 open("/lib/librt.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300h\322\0004\0\0\0T"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=43924, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f2f000 mmap2(0xd25000, 33332, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xd25000 mmap2(0xd2c000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6) = 0xd2c000 close(3) = 0 open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300K\264\0004\0\0\0\304"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1803388, ...}) = 0 mmap2(0xb2e000, 1513768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x110000 mprotect(0x27b000, 4096, PROT_NONE) = 0 mmap2(0x27c000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16b) = 0x27c000 mmap2(0x27f000, 10536, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x27f000 close(3) = 0 open("/lib/i686/libpthread.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0Py\315\0004\0\0\0\350"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=140408, ...}) = 0 mmap2(0xcd3000, 106976, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xcd3000 mprotect(0xce9000, 4096, PROT_NONE) = 0 mmap2(0xcea000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16) = 0xcea000 mmap2(0xcec000, 4576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xcec000 close(3) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f2e000 set_thread_area({entry_number:-1 -> 6, base_addr:0xb7f2e6c0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0 mprotect(0xcea000, 4096, PROT_READ) = 0 mprotect(0x27c000, 8192, PROT_READ) = 0 mprotect(0xd2c000, 4096, PROT_READ) = 0 mprotect(0xb26000, 4096, PROT_READ) = 0 munmap(0xb7f30000, 125568) = 0 set_tid_address(0xb7f2e728) = 6446 set_robust_list(0xb7f2e730, 0xc) = 0 futex(0xbfa4e030, FUTEX_WAKE_PRIVATE, 1) = 0 futex(0xbfa4e030, 0x189 /* FUTEX_??? */, 1, NULL, bfa4e040) = -1 EAGAIN (Resource temporarily unavailable) rt_sigaction(SIGRTMIN, {0xcd7340, [], SA_SIGINFO}, NULL, 8) = 0 rt_sigaction(SIGRT_1, {0xcd7840, [], SA_RESTART|SA_SIGINFO}, NULL, 8) = 0 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=10240*1024, rlim_max=RLIM_INFINITY}) = 0 uname({sys="Linux", node="fedora11", ...}) = 0 brk(0) = 0x9564000 brk(0x9585000) = 0x9585000 gettimeofday({1245397037, 261081}, NULL) = 0 mkdir("/tmp/mq_wHG2nE", 0700) = 0 getgid32() = 0 chown32("/tmp/mq_wHG2nE", -1, 0) = 0 chmod("/tmp/mq_wHG2nE", 0777) = 0 chdir("/tmp/mq_wHG2nE") = 0 fstat64(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 1), ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f4e000 write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 0 INFO : (case00) START ) = 48 mq_unlink("test_mqueue") = 0 mq_open("test_mqueue", O_RDWR|O_CREAT|O_EXCL, 0700, { ??? }) = 3 mq_timedsend(3, ""..., 0, 0, NULL) = 0 mq_timedreceive(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 8192, -1079713876, NULL) = 0 write(2, "EXPECT: return value(ret)=0"..., 27EXPECT: return value(ret)=0) = 27 write(2, " errno=0 (Success)"..., 18 errno=0 (Success)) = 18 write(2, "\n"..., 1 ) = 1 write(2, "RESULT: return value(ret)=0"..., 27RESULT: return value(ret)=0) = 27 write(2, " errno=0 (Success)"..., 18 errno=0 (Success)) = 18 write(2, "\n"..., 1 ) = 1 close(3) = 0 mq_unlink("test_mqueue") = 0 write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 0 INFO : (case00) END => OK ) = 52 write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 0 INFO : (case01) START ) = 48 mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) mq_open("test_mqueue", O_RDWR|O_CREAT|O_EXCL, 0700, { ??? }) = 3 mq_timedsend(3, "\0"..., 1, 0, NULL) = 0 mq_timedreceive(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 8192, -1079713876, NULL) = 1 write(2, "EXPECT: return value(ret)=1"..., 27EXPECT: return value(ret)=1) = 27 write(2, " errno=0 (Success)"..., 18 errno=0 (Success)) = 18 write(2, "\n"..., 1 ) = 1 write(2, "RESULT: return value(ret)=1"..., 27RESULT: return value(ret)=1) = 27 write(2, " errno=0 (Success)"..., 18 errno=0 (Success)) = 18 write(2, "\n"..., 1 ) = 1 close(3) = 0 mq_unlink("test_mqueue") = 0 write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 0 INFO : (case01) END => OK ) = 52 write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 0 INFO : (case02) START ) = 48 mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) mq_open("test_mqueue", O_RDWR|O_CREAT|O_EXCL, 0700, { ??? }) = 3 mq_timedsend(3, "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 "..., 8192, 0, NULL) = 0 mq_timedreceive(3, "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 "..., 8192, -1079713876, NULL) = 8192 write(2, "EXPECT: return value(ret)=8192"..., 30EXPECT: return value(ret)=8192) = 30 write(2, " errno=0 (Success)"..., 18 errno=0 (Success)) = 18 write(2, "\n"..., 1 ) = 1 write(2, "RESULT: return value(ret)=8192"..., 30RESULT: return value(ret)=8192) = 30 write(2, " errno=0 (Success)"..., 18 errno=0 (Success)) = 18 write(2, "\n"..., 1 ) = 1 close(3) = 0 mq_unlink("test_mqueue") = 0 write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 0 INFO : (case02) END => OK ) = 52 write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 0 INFO : (case03) START ) = 48 mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) mq_open("test_mqueue", O_RDWR|O_CREAT|O_EXCL, 0700, { ??? }) = 3 mq_timedsend(3, "\0"..., 1, 32767, NULL) = 0 mq_timedreceive(3, "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 "..., 8192, -1079713876, NULL) = 1 write(2, "EXPECT: return value(ret)=1"..., 27EXPECT: return value(ret)=1) = 27 write(2, " errno=0 (Success)"..., 18 errno=0 (Success)) = 18 write(2, "\n"..., 1 ) = 1 write(2, "RESULT: return value(ret)=1"..., 27RESULT: return value(ret)=1) = 27 write(2, " errno=0 (Success)"..., 18 errno=0 (Success)) = 18 write(2, "\n"..., 1 ) = 1 close(3) = 0 mq_unlink("test_mqueue") = 0 write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 0 INFO : (case03) END => OK ) = 52 write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 0 INFO : (case04) START ) = 48 mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) mq_open("test_mqueue", O_RDWR|O_CREAT|O_EXCL, 0700, { ??? }) = 3 mq_timedsend(3, ""..., 0, 0, NULL) = 0 mq_timedreceive(3, "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 "..., 8191, -1079713876, NULL) = -1 EMSGSIZE (Message too long) write(2, "EXPECT: return value(ret)=-1"..., 28EXPECT: return value(ret)=-1) = 28 write(2, " errno=90 (Message too long)"..., 28 errno=90 (Message too long)) = 28 write(2, "\n"..., 1 ) = 1 write(2, "RESULT: return value(ret)=-1"..., 28RESULT: return value(ret)=-1) = 28 write(2, " errno=90 (Message too long)"..., 28 errno=90 (Message too long)) = 28 write(2, "\n"..., 1 ) = 1 close(3) = 0 mq_unlink("test_mqueue") = 0 write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 0 INFO : (case04) END => OK ) = 52 write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 0 INFO : (case05) START ) = 48 mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) mq_timedreceive(-1, "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 "..., 8192, -1079713876, NULL) = -1 EBADF (Bad file descriptor) write(2, "EXPECT: return value(ret)=-1"..., 28EXPECT: return value(ret)=-1) = 28 write(2, " errno=9 (Bad file descriptor)"..., 30 errno=9 (Bad file descriptor)) = 30 write(2, "\n"..., 1 ) = 1 write(2, "RESULT: return value(ret)=-1"..., 28RESULT: return value(ret)=-1) = 28 write(2, " errno=9 (Bad file descriptor)"..., 30 errno=9 (Bad file descriptor)) = 30 write(2, "\n"..., 1 ) = 1 write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 0 INFO : (case05) END => OK ) = 52 write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 0 INFO : (case06) START ) = 48 mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) mq_timedreceive(2147483646, "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 "..., 8192, -1079713876, NULL) = -1 EBADF (Bad file descriptor) write(2, "EXPECT: return value(ret)=-1"..., 28EXPECT: return value(ret)=-1) = 28 write(2, " errno=9 (Bad file descriptor)"..., 30 errno=9 (Bad file descriptor)) = 30 write(2, "\n"..., 1 ) = 1 write(2, "RESULT: return value(ret)=-1"..., 28RESULT: return value(ret)=-1) = 28 write(2, " errno=9 (Bad file descriptor)"..., 30 errno=9 (Bad file descriptor)) = 30 write(2, "\n"..., 1 ) = 1 close(2147483646) = -1 EBADF (Bad file descriptor) mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 0 INFO : (case06) END => OK ) = 52 write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 0 INFO : (case07) START ) = 48 mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) open("/", O_RDONLY) = 3 mq_timedreceive(3, "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 "..., 8192, -1079713876, NULL) = -1 EBADF (Bad file descriptor) write(2, "EXPECT: return value(ret)=-1"..., 28EXPECT: return value(ret)=-1) = 28 write(2, " errno=9 (Bad file descriptor)"..., 30 errno=9 (Bad file descriptor)) = 30 write(2, "\n"..., 1 ) = 1 write(2, "RESULT: return value(ret)=-1"..., 28RESULT: return value(ret)=-1) = 28 write(2, " errno=9 (Bad file descriptor)"..., 30 errno=9 (Bad file descriptor)) = 30 write(2, "\n"..., 1 ) = 1 close(3) = 0 mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 0 INFO : (case07) END => OK ) = 52 write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 0 INFO : (case08) START ) = 48 mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) mq_open("test_mqueue", O_RDWR|O_CREAT|O_EXCL|O_NONBLOCK, 0700, { ??? }) = 3 mq_timedreceive(3, "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 "..., 8192, -1079713876, NULL) = -1 EAGAIN (Resource temporarily unavailable) write(2, "EXPECT: return value(ret)=-1"..., 28EXPECT: return value(ret)=-1) = 28 write(2, " errno=11 (Resource temporarily u"..., 44 errno=11 (Resource temporarily unavailable)) = 44 write(2, "\n"..., 1 ) = 1 write(2, "RESULT: return value(ret)=-1"..., 28RESULT: return value(ret)=-1) = 28 write(2, " errno=11 (Resource temporarily u"..., 44 errno=11 (Resource temporarily unavailable)) = 44 write(2, "\n"..., 1 ) = 1 close(3) = 0 mq_unlink("test_mqueue") = 0 write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 0 INFO : (case08) END => OK ) = 52 write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 0 INFO : (case09) START ) = 48 mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) mq_open("test_mqueue", O_RDWR|O_CREAT|O_EXCL, 0700, { ??? }) = 3 mq_timedreceive(3, "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 "..., 8192, -1079713876, {4294967295, 0}) = -1 EINVAL (Invalid argument) write(2, "EXPECT: return value(ret)=-1"..., 28EXPECT: return value(ret)=-1) = 28 write(2, " errno=22 (Invalid argument)"..., 28 errno=22 (Invalid argument)) = 28 write(2, "\n"..., 1 ) = 1 write(2, "RESULT: return value(ret)=-1"..., 28RESULT: return value(ret)=-1) = 28 write(2, " errno=22 (Invalid argument)"..., 28 errno=22 (Invalid argument)) = 28 write(2, "\n"..., 1 ) = 1 close(3) = 0 mq_unlink("test_mqueue") = 0 write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 0 INFO : (case09) END => OK ) = 52 write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 0 INFO : (case10) START ) = 48 mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) mq_open("test_mqueue", O_RDWR|O_CREAT|O_EXCL, 0700, { ??? }) = 3 mq_timedreceive(3, "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 "..., 8192, -1079713876, {0, 4294967295}) = -1 EINVAL (Invalid argument) write(2, "EXPECT: return value(ret)=-1"..., 28EXPECT: return value(ret)=-1) = 28 write(2, " errno=22 (Invalid argument)"..., 28 errno=22 (Invalid argument)) = 28 write(2, "\n"..., 1 ) = 1 write(2, "RESULT: return value(ret)=-1"..., 28RESULT: return value(ret)=-1) = 28 write(2, " errno=22 (Invalid argument)"..., 28 errno=22 (Invalid argument)) = 28 write(2, "\n"..., 1 ) = 1 close(3) = 0 mq_unlink("test_mqueue") = 0 write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 0 INFO : (case10) END => OK ) = 52 write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 0 INFO : (case11) START ) = 48 mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) mq_open("test_mqueue", O_RDWR|O_CREAT|O_EXCL, 0700, { ??? }) = 3 mq_timedreceive(3, "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 "..., 8192, -1079713876, {0, 1000000000}) = -1 EINVAL (Invalid argument) write(2, "EXPECT: return value(ret)=-1"..., 28EXPECT: return value(ret)=-1) = 28 write(2, " errno=22 (Invalid argument)"..., 28 errno=22 (Invalid argument)) = 28 write(2, "\n"..., 1 ) = 1 write(2, "RESULT: return value(ret)=-1"..., 28RESULT: return value(ret)=-1) = 28 write(2, " errno=22 (Invalid argument)"..., 28 errno=22 (Invalid argument)) = 28 write(2, "\n"..., 1 ) = 1 close(3) = 0 mq_unlink("test_mqueue") = 0 write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 0 INFO : (case11) END => OK ) = 52 write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 0 INFO : (case12) START ) = 48 mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) mq_open("test_mqueue", O_RDWR|O_CREAT|O_EXCL, 0700, { ??? }) = 3 mq_timedreceive(3, "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 "..., 8192, -1079713876, {0, 999999999}) = -1 ETIMEDOUT (Connection timed out) write(2, "EXPECT: return value(ret)=-1"..., 28EXPECT: return value(ret)=-1) = 28 write(2, " errno=110 (Connection timed out)"..., 33 errno=110 (Connection timed out)) = 33 write(2, "\n"..., 1 ) = 1 write(2, "RESULT: return value(ret)=-1"..., 28RESULT: return value(ret)=-1) = 28 write(2, " errno=110 (Connection timed out)"..., 33 errno=110 (Connection timed out)) = 33 write(2, "\n"..., 1 ) = 1 close(3) = 0 mq_unlink("test_mqueue") = 0 write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 0 INFO : (case12) END => OK ) = 52 write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 0 INFO : (case13) START ) = 48 mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) mq_open("test_mqueue", O_RDWR|O_CREAT|O_EXCL, 0700, { ??? }) = 3 rt_sigaction(SIGUSR2, {0x80493c0, [], SA_INTERRUPT|SA_NODEFER|SA_RESETHAND}, {SIG_DFL, [], 0}, 8) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0xb7f2e728) = 6447 kill(6447, SIGUSR2) = 0 mq_timedreceive(3, # screenshot of "#> tail -f ./output/alltest.out" /******************************************************************************/ /* */ /* File: mq_timedreceive01.c */ /* */ /* Description: This tests the mq_timedreceive() syscall */ /* */ /* */ /* */ /* */ /* */ /* */ /* Usage: <for command-line> */ /* mq_timedreceive01 [-c n] [-e][-i n] [-I x] [-p x] [-t] */ /* where, -c n : Run n copies concurrently. */ /* -e : Turn on errno logging. */ /* -i n : Execute test n times. */ /* -I x : Execute test for x seconds. */ /* -P x : Pause for x seconds between iterations. */ /* -t : Turn on syscall timing. */ /* */ /* Total Tests: 1 */ /* */ /* Test Name: mq_timedreceive01 */ /* History: Porting from Crackerjack to LTP is done by */ /* Manas Kumar Nayak maknayak@in.ibm.com> */ /******************************************************************************/ <<<test_start>>> tag=mq_open01 stime=1245392211 cmdline="mq_open01" contacts="" analysis=exit initiation_status="ok" <<<test_output>>> EXPECT: return value(ret)=(N >= 0) errno=0 (Success), r/w check=OK RESULT: return value(ret)= 6 errno=0 (Success), r/w check=NG mq_open01 0 INFO : (case00) START mq_open01 0 INFO : (case00) END => NG mq_open01 1 FAIL : mq_open01 failed - errno = 0 : Success mq_open01 0 INFO : NG <<<execution_status>>> duration=0 termination_type=exited termination_id=1 corefile=no cutime=0 cstime=0 <<<test_end>>> <<<test_start>>> tag=mq_timedreceive01 stime=1245392211 cmdline="mq_timedreceive01" contacts="" analysis=exit initiation_status="ok" <<<test_output>>> EXPECT: return value(ret)=0 errno=0 (Success) RESULT: return value(ret)=0 errno=0 (Success) EXPECT: return value(ret)=1 errno=0 (Success) RESULT: return value(ret)=1 errno=0 (Success) EXPECT: return value(ret)=8192 errno=0 (Success) RESULT: return value(ret)=8192 errno=0 (Success) EXPECT: return value(ret)=1 errno=0 (Success) RESULT: return value(ret)=1 errno=0 (Success) EXPECT: return value(ret)=-1 errno=90 (Message too long) RESULT: return value(ret)=-1 errno=90 (Message too long) EXPECT: return value(ret)=-1 errno=9 (Bad file descriptor) RESULT: return value(ret)=-1 errno=9 (Bad file descriptor) EXPECT: return value(ret)=-1 errno=9 (Bad file descriptor) RESULT: return value(ret)=-1 errno=9 (Bad file descriptor) EXPECT: return value(ret)=-1 errno=9 (Bad file descriptor) RESULT: return value(ret)=-1 errno=9 (Bad file descriptor) EXPECT: return value(ret)=-1 errno=11 (Resource temporarily unavailable) RESULT: return value(ret)=-1 errno=11 (Resource temporarily unavailable) EXPECT: return value(ret)=-1 errno=22 (Invalid argument) RESULT: return value(ret)=-1 errno=22 (Invalid argument) EXPECT: return value(ret)=-1 errno=22 (Invalid argument) RESULT: return value(ret)=-1 errno=22 (Invalid argument) EXPECT: return value(ret)=-1 errno=22 (Invalid argument) RESULT: return value(ret)=-1 errno=22 (Invalid argument) EXPECT: return value(ret)=-1 errno=110 (Connection timed out) RESULT: return value(ret)=-1 errno=110 (Connection timed out) -- Regards, GeunSik Lim ( Samsung Electronics ) Blog : http://blog.naver.com/invain/ e-Mail: geunsik.lim@samsung.com leemgs@gmail.com , leemgs1@gmail.com -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ ------------------------------------------------------------------------------ Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [LTP] I met "You can specify it with option -b" error message 2009-06-19 7:40 ` GeunSik Lim @ 2009-06-23 14:50 ` Subrata Modak 0 siblings, 0 replies; 6+ messages in thread From: Subrata Modak @ 2009-06-23 14:50 UTC (permalink / raw) To: GeunSik Lim; +Cc: ltp-list, Andrew Vagin On Fri, 2009-06-19 at 16:40 +0900, GeunSik Lim wrote: > On Fri, Jun 19, 2009 at 2:29 PM, Subrata > Modak<subrata@linux.vnet.ibm.com> wrote: > > > > > Because, when you use the option -o, ltp-pan will redirect all your test > > output to ltp/output/alltest.out. Do tail -f ltp/output/alltest.out, you > > will see output scrolling out. Given the size of default ltp run, you > > can expect somewhere from 1.5 to 2.5 hours before your command prompt > > returns from: > > > > time ./runltp -v -l alltest.log -o alltest.out -g alltest.html > > > > Regards-- > > Subrata > > Subrata, > Thanks, I got some data like belows thanks to you. > paused location is mq_timedreceive01(tag) when I used "#> tail -f > ./output/alltest.out" command . > > As I report, I can not finshed ltp test in Fedora 11 rootFS. > Fedora 11 rootFS + Same Kernel + ltp-full-20090531 --> Fail > Centos 5.3rootFS + Same Kernel + ltp-full-20090531 --> Success > > > /opt/ltp-full-20090531/testcases/kernel/syscalls/mq_timedreceive/mq_timedreceive01.c > #> man mq_receive, mq_timedreceive - receive a message from a message queue > > > > [root@fedora11 mq_timedreceive]# strace ./mq_timedreceive01 > execve("./mq_timedreceive01", ["./mq_timedreceive01"], [/* 29 vars */]) = 0 > brk(0) = 0x9564000 > access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) > open("/etc/ld.so.cache", O_RDONLY) = 3 > fstat64(3, {st_mode=S_IFREG|0644, st_size=125568, ...}) = 0 > mmap2(NULL, 125568, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f30000 > close(3) = 0 > open("/lib/librt.so.1", O_RDONLY) = 3 > read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300h\322\0004\0\0\0T"..., > 512) = 512 > fstat64(3, {st_mode=S_IFREG|0755, st_size=43924, ...}) = 0 > mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, > 0) = 0xb7f2f000 > mmap2(0xd25000, 33332, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, > 3, 0) = 0xd25000 > mmap2(0xd2c000, 8192, PROT_READ|PROT_WRITE, > MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6) = 0xd2c000 > close(3) = 0 > open("/lib/libc.so.6", O_RDONLY) = 3 > read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300K\264\0004\0\0\0\304"..., > 512) = 512 > fstat64(3, {st_mode=S_IFREG|0755, st_size=1803388, ...}) = 0 > mmap2(0xb2e000, 1513768, PROT_READ|PROT_EXEC, > MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x110000 > mprotect(0x27b000, 4096, PROT_NONE) = 0 > mmap2(0x27c000, 12288, PROT_READ|PROT_WRITE, > MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16b) = 0x27c000 > mmap2(0x27f000, 10536, PROT_READ|PROT_WRITE, > MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x27f000 > close(3) = 0 > open("/lib/i686/libpthread.so.0", O_RDONLY) = 3 > read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0Py\315\0004\0\0\0\350"..., > 512) = 512 > fstat64(3, {st_mode=S_IFREG|0755, st_size=140408, ...}) = 0 > mmap2(0xcd3000, 106976, PROT_READ|PROT_EXEC, > MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xcd3000 > mprotect(0xce9000, 4096, PROT_NONE) = 0 > mmap2(0xcea000, 8192, PROT_READ|PROT_WRITE, > MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16) = 0xcea000 > mmap2(0xcec000, 4576, PROT_READ|PROT_WRITE, > MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xcec000 > close(3) = 0 > mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, > 0) = 0xb7f2e000 > set_thread_area({entry_number:-1 -> 6, base_addr:0xb7f2e6c0, > limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, > limit_in_pages:1, seg_not_present:0, useable:1}) = 0 > mprotect(0xcea000, 4096, PROT_READ) = 0 > mprotect(0x27c000, 8192, PROT_READ) = 0 > mprotect(0xd2c000, 4096, PROT_READ) = 0 > mprotect(0xb26000, 4096, PROT_READ) = 0 > munmap(0xb7f30000, 125568) = 0 > set_tid_address(0xb7f2e728) = 6446 > set_robust_list(0xb7f2e730, 0xc) = 0 > futex(0xbfa4e030, FUTEX_WAKE_PRIVATE, 1) = 0 > futex(0xbfa4e030, 0x189 /* FUTEX_??? */, 1, NULL, bfa4e040) = -1 > EAGAIN (Resource temporarily unavailable) > rt_sigaction(SIGRTMIN, {0xcd7340, [], SA_SIGINFO}, NULL, 8) = 0 > rt_sigaction(SIGRT_1, {0xcd7840, [], SA_RESTART|SA_SIGINFO}, NULL, 8) = 0 > rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0 > getrlimit(RLIMIT_STACK, {rlim_cur=10240*1024, rlim_max=RLIM_INFINITY}) = 0 > uname({sys="Linux", node="fedora11", ...}) = 0 > brk(0) = 0x9564000 > brk(0x9585000) = 0x9585000 > gettimeofday({1245397037, 261081}, NULL) = 0 > mkdir("/tmp/mq_wHG2nE", 0700) = 0 > getgid32() = 0 > chown32("/tmp/mq_wHG2nE", -1, 0) = 0 > chmod("/tmp/mq_wHG2nE", 0777) = 0 > chdir("/tmp/mq_wHG2nE") = 0 > fstat64(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 1), ...}) = 0 > mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, > 0) = 0xb7f4e000 > write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 > 0 INFO : (case00) START > ) = 48 > mq_unlink("test_mqueue") = 0 > mq_open("test_mqueue", O_RDWR|O_CREAT|O_EXCL, 0700, { ??? }) = 3 > mq_timedsend(3, ""..., 0, 0, NULL) = 0 > mq_timedreceive(3, > "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., > 8192, -1079713876, NULL) = 0 > write(2, "EXPECT: return value(ret)=0"..., 27EXPECT: return value(ret)=0) = 27 > write(2, " errno=0 (Success)"..., 18 errno=0 (Success)) = 18 > write(2, "\n"..., 1 > ) = 1 > write(2, "RESULT: return value(ret)=0"..., 27RESULT: return value(ret)=0) = 27 > write(2, " errno=0 (Success)"..., 18 errno=0 (Success)) = 18 > write(2, "\n"..., 1 > ) = 1 > close(3) = 0 > mq_unlink("test_mqueue") = 0 > write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 > 0 INFO : (case00) END => OK > ) = 52 > write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 > 0 INFO : (case01) START > ) = 48 > mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) > mq_open("test_mqueue", O_RDWR|O_CREAT|O_EXCL, 0700, { ??? }) = 3 > mq_timedsend(3, "\0"..., 1, 0, NULL) = 0 > mq_timedreceive(3, > "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., > 8192, -1079713876, NULL) = 1 > write(2, "EXPECT: return value(ret)=1"..., 27EXPECT: return value(ret)=1) = 27 > write(2, " errno=0 (Success)"..., 18 errno=0 (Success)) = 18 > write(2, "\n"..., 1 > ) = 1 > write(2, "RESULT: return value(ret)=1"..., 27RESULT: return value(ret)=1) = 27 > write(2, " errno=0 (Success)"..., 18 errno=0 (Success)) = 18 > write(2, "\n"..., 1 > ) = 1 > close(3) = 0 > mq_unlink("test_mqueue") = 0 > write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 > 0 INFO : (case01) END => OK > ) = 52 > write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 > 0 INFO : (case02) START > ) = 48 > mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) > mq_open("test_mqueue", O_RDWR|O_CREAT|O_EXCL, 0700, { ??? }) = 3 > mq_timedsend(3, > "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 > "..., 8192, 0, NULL) = 0 > mq_timedreceive(3, > "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 > "..., 8192, -1079713876, NULL) = 8192 > write(2, "EXPECT: return value(ret)=8192"..., 30EXPECT: return > value(ret)=8192) = 30 > write(2, " errno=0 (Success)"..., 18 errno=0 (Success)) = 18 > write(2, "\n"..., 1 > ) = 1 > write(2, "RESULT: return value(ret)=8192"..., 30RESULT: return > value(ret)=8192) = 30 > write(2, " errno=0 (Success)"..., 18 errno=0 (Success)) = 18 > write(2, "\n"..., 1 > ) = 1 > close(3) = 0 > mq_unlink("test_mqueue") = 0 > write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 > 0 INFO : (case02) END => OK > ) = 52 > write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 > 0 INFO : (case03) START > ) = 48 > mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) > mq_open("test_mqueue", O_RDWR|O_CREAT|O_EXCL, 0700, { ??? }) = 3 > mq_timedsend(3, "\0"..., 1, 32767, NULL) = 0 > mq_timedreceive(3, > "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 > "..., 8192, -1079713876, NULL) = 1 > write(2, "EXPECT: return value(ret)=1"..., 27EXPECT: return value(ret)=1) = 27 > write(2, " errno=0 (Success)"..., 18 errno=0 (Success)) = 18 > write(2, "\n"..., 1 > ) = 1 > write(2, "RESULT: return value(ret)=1"..., 27RESULT: return value(ret)=1) = 27 > write(2, " errno=0 (Success)"..., 18 errno=0 (Success)) = 18 > write(2, "\n"..., 1 > ) = 1 > close(3) = 0 > mq_unlink("test_mqueue") = 0 > write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 > 0 INFO : (case03) END => OK > ) = 52 > write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 > 0 INFO : (case04) START > ) = 48 > mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) > mq_open("test_mqueue", O_RDWR|O_CREAT|O_EXCL, 0700, { ??? }) = 3 > mq_timedsend(3, ""..., 0, 0, NULL) = 0 > mq_timedreceive(3, > "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 > "..., 8191, -1079713876, NULL) = -1 EMSGSIZE (Message too long) > write(2, "EXPECT: return value(ret)=-1"..., 28EXPECT: return value(ret)=-1) = 28 > write(2, " errno=90 (Message too long)"..., 28 errno=90 (Message too long)) = 28 > write(2, "\n"..., 1 > ) = 1 > write(2, "RESULT: return value(ret)=-1"..., 28RESULT: return value(ret)=-1) = 28 > write(2, " errno=90 (Message too long)"..., 28 errno=90 (Message too long)) = 28 > write(2, "\n"..., 1 > ) = 1 > close(3) = 0 > mq_unlink("test_mqueue") = 0 > write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 > 0 INFO : (case04) END => OK > ) = 52 > write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 > 0 INFO : (case05) START > ) = 48 > mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) > mq_timedreceive(-1, > "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 > "..., 8192, -1079713876, NULL) = -1 EBADF (Bad file descriptor) > write(2, "EXPECT: return value(ret)=-1"..., 28EXPECT: return value(ret)=-1) = 28 > write(2, " errno=9 (Bad file descriptor)"..., 30 errno=9 (Bad file > descriptor)) = 30 > write(2, "\n"..., 1 > ) = 1 > write(2, "RESULT: return value(ret)=-1"..., 28RESULT: return value(ret)=-1) = 28 > write(2, " errno=9 (Bad file descriptor)"..., 30 errno=9 (Bad file > descriptor)) = 30 > write(2, "\n"..., 1 > ) = 1 > write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 > 0 INFO : (case05) END => OK > ) = 52 > write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 > 0 INFO : (case06) START > ) = 48 > mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) > mq_timedreceive(2147483646, > "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 > "..., 8192, -1079713876, NULL) = -1 EBADF (Bad file descriptor) > write(2, "EXPECT: return value(ret)=-1"..., 28EXPECT: return value(ret)=-1) = 28 > write(2, " errno=9 (Bad file descriptor)"..., 30 errno=9 (Bad file > descriptor)) = 30 > write(2, "\n"..., 1 > ) = 1 > write(2, "RESULT: return value(ret)=-1"..., 28RESULT: return value(ret)=-1) = 28 > write(2, " errno=9 (Bad file descriptor)"..., 30 errno=9 (Bad file > descriptor)) = 30 > write(2, "\n"..., 1 > ) = 1 > close(2147483646) = -1 EBADF (Bad file descriptor) > mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) > write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 > 0 INFO : (case06) END => OK > ) = 52 > write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 > 0 INFO : (case07) START > ) = 48 > mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) > open("/", O_RDONLY) = 3 > mq_timedreceive(3, > "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 > "..., 8192, -1079713876, NULL) = -1 EBADF (Bad file descriptor) > write(2, "EXPECT: return value(ret)=-1"..., 28EXPECT: return value(ret)=-1) = 28 > write(2, " errno=9 (Bad file descriptor)"..., 30 errno=9 (Bad file > descriptor)) = 30 > write(2, "\n"..., 1 > ) = 1 > write(2, "RESULT: return value(ret)=-1"..., 28RESULT: return value(ret)=-1) = 28 > write(2, " errno=9 (Bad file descriptor)"..., 30 errno=9 (Bad file > descriptor)) = 30 > write(2, "\n"..., 1 > ) = 1 > close(3) = 0 > mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) > write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 > 0 INFO : (case07) END => OK > ) = 52 > write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 > 0 INFO : (case08) START > ) = 48 > mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) > mq_open("test_mqueue", O_RDWR|O_CREAT|O_EXCL|O_NONBLOCK, 0700, { ??? }) = 3 > mq_timedreceive(3, > "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 > "..., 8192, -1079713876, NULL) = -1 EAGAIN (Resource temporarily > unavailable) > write(2, "EXPECT: return value(ret)=-1"..., 28EXPECT: return value(ret)=-1) = 28 > write(2, " errno=11 (Resource temporarily u"..., 44 errno=11 (Resource > temporarily unavailable)) = 44 > write(2, "\n"..., 1 > ) = 1 > write(2, "RESULT: return value(ret)=-1"..., 28RESULT: return value(ret)=-1) = 28 > write(2, " errno=11 (Resource temporarily u"..., 44 errno=11 (Resource > temporarily unavailable)) = 44 > write(2, "\n"..., 1 > ) = 1 > close(3) = 0 > mq_unlink("test_mqueue") = 0 > write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 > 0 INFO : (case08) END => OK > ) = 52 > write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 > 0 INFO : (case09) START > ) = 48 > mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) > mq_open("test_mqueue", O_RDWR|O_CREAT|O_EXCL, 0700, { ??? }) = 3 > mq_timedreceive(3, > "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 > "..., 8192, -1079713876, {4294967295, 0}) = -1 EINVAL (Invalid > argument) > write(2, "EXPECT: return value(ret)=-1"..., 28EXPECT: return value(ret)=-1) = 28 > write(2, " errno=22 (Invalid argument)"..., 28 errno=22 (Invalid argument)) = 28 > write(2, "\n"..., 1 > ) = 1 > write(2, "RESULT: return value(ret)=-1"..., 28RESULT: return value(ret)=-1) = 28 > write(2, " errno=22 (Invalid argument)"..., 28 errno=22 (Invalid argument)) = 28 > write(2, "\n"..., 1 > ) = 1 > close(3) = 0 > mq_unlink("test_mqueue") = 0 > write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 > 0 INFO : (case09) END => OK > ) = 52 > write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 > 0 INFO : (case10) START > ) = 48 > mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) > mq_open("test_mqueue", O_RDWR|O_CREAT|O_EXCL, 0700, { ??? }) = 3 > mq_timedreceive(3, > "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 > "..., 8192, -1079713876, {0, 4294967295}) = -1 EINVAL (Invalid > argument) > write(2, "EXPECT: return value(ret)=-1"..., 28EXPECT: return value(ret)=-1) = 28 > write(2, " errno=22 (Invalid argument)"..., 28 errno=22 (Invalid argument)) = 28 > write(2, "\n"..., 1 > ) = 1 > write(2, "RESULT: return value(ret)=-1"..., 28RESULT: return value(ret)=-1) = 28 > write(2, " errno=22 (Invalid argument)"..., 28 errno=22 (Invalid argument)) = 28 > write(2, "\n"..., 1 > ) = 1 > close(3) = 0 > mq_unlink("test_mqueue") = 0 > write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 > 0 INFO : (case10) END => OK > ) = 52 > write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 > 0 INFO : (case11) START > ) = 48 > mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) > mq_open("test_mqueue", O_RDWR|O_CREAT|O_EXCL, 0700, { ??? }) = 3 > mq_timedreceive(3, > "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 > "..., 8192, -1079713876, {0, 1000000000}) = -1 EINVAL (Invalid > argument) > write(2, "EXPECT: return value(ret)=-1"..., 28EXPECT: return value(ret)=-1) = 28 > write(2, " errno=22 (Invalid argument)"..., 28 errno=22 (Invalid argument)) = 28 > write(2, "\n"..., 1 > ) = 1 > write(2, "RESULT: return value(ret)=-1"..., 28RESULT: return value(ret)=-1) = 28 > write(2, " errno=22 (Invalid argument)"..., 28 errno=22 (Invalid argument)) = 28 > write(2, "\n"..., 1 > ) = 1 > close(3) = 0 > mq_unlink("test_mqueue") = 0 > write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 > 0 INFO : (case11) END => OK > ) = 52 > write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 > 0 INFO : (case12) START > ) = 48 > mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) > mq_open("test_mqueue", O_RDWR|O_CREAT|O_EXCL, 0700, { ??? }) = 3 > mq_timedreceive(3, > "\0\1\2\3\4\5\6\7\10\t\n\v\f\r\16\17\20\21\22\23\24\25\26\27\30\31\32\33\34\35\36\37 > "..., 8192, -1079713876, {0, 999999999}) = -1 ETIMEDOUT (Connection > timed out) > write(2, "EXPECT: return value(ret)=-1"..., 28EXPECT: return value(ret)=-1) = 28 > write(2, " errno=110 (Connection timed out)"..., 33 errno=110 > (Connection timed out)) = 33 > write(2, "\n"..., 1 > ) = 1 > write(2, "RESULT: return value(ret)=-1"..., 28RESULT: return value(ret)=-1) = 28 > write(2, " errno=110 (Connection timed out)"..., 33 errno=110 > (Connection timed out)) = 33 > write(2, "\n"..., 1 > ) = 1 > close(3) = 0 > mq_unlink("test_mqueue") = 0 > write(1, "mq_timedreceive01 0 INFO : "..., 52mq_timedreceive01 > 0 INFO : (case12) END => OK > ) = 52 > write(1, "mq_timedreceive01 0 INFO : "..., 48mq_timedreceive01 > 0 INFO : (case13) START > ) = 48 > mq_unlink("test_mqueue") = -1 ENOENT (No such file or directory) > mq_open("test_mqueue", O_RDWR|O_CREAT|O_EXCL, 0700, { ??? }) = 3 > rt_sigaction(SIGUSR2, {0x80493c0, [], > SA_INTERRUPT|SA_NODEFER|SA_RESETHAND}, {SIG_DFL, [], 0}, 8) = 0 > clone(child_stack=0, > flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, > child_tidptr=0xb7f2e728) = 6447 > kill(6447, SIGUSR2) = 0 > mq_timedreceive(3, > > > > # screenshot of "#> tail -f ./output/alltest.out" > > /******************************************************************************/ > /* */ > /* File: mq_timedreceive01.c */ > /* */ > /* Description: This tests the mq_timedreceive() syscall */ > /* */ > /* */ > /* */ > /* */ > /* */ > /* */ > /* Usage: <for command-line> */ > /* mq_timedreceive01 [-c n] [-e][-i n] [-I x] [-p x] [-t] */ > /* where, -c n : Run n copies concurrently. */ > /* -e : Turn on errno logging. */ > /* -i n : Execute test n times. */ > /* -I x : Execute test for x seconds. */ > /* -P x : Pause for x seconds between iterations. */ > /* -t : Turn on syscall timing. */ > /* */ > /* Total Tests: 1 */ > /* */ > /* Test Name: mq_timedreceive01 */ > /* History: Porting from Crackerjack to LTP is done by */ > /* Manas Kumar Nayak maknayak@in.ibm.com> */ > /******************************************************************************/ > > > > > <<<test_start>>> > tag=mq_open01 stime=1245392211 > cmdline="mq_open01" > contacts="" > analysis=exit > initiation_status="ok" > <<<test_output>>> > EXPECT: return value(ret)=(N >= 0) errno=0 (Success), r/w check=OK > RESULT: return value(ret)= 6 errno=0 (Success), r/w check=NG > mq_open01 0 INFO : (case00) START > mq_open01 0 INFO : (case00) END => NG > mq_open01 1 FAIL : mq_open01 failed - errno = 0 : Success > mq_open01 0 INFO : NG > <<<execution_status>>> > duration=0 termination_type=exited termination_id=1 corefile=no > cutime=0 cstime=0 > <<<test_end>>> > > > <<<test_start>>> > tag=mq_timedreceive01 stime=1245392211 > cmdline="mq_timedreceive01" > contacts="" > analysis=exit > initiation_status="ok" > <<<test_output>>> > EXPECT: return value(ret)=0 errno=0 (Success) > RESULT: return value(ret)=0 errno=0 (Success) > EXPECT: return value(ret)=1 errno=0 (Success) > RESULT: return value(ret)=1 errno=0 (Success) > EXPECT: return value(ret)=8192 errno=0 (Success) > RESULT: return value(ret)=8192 errno=0 (Success) > EXPECT: return value(ret)=1 errno=0 (Success) > RESULT: return value(ret)=1 errno=0 (Success) > EXPECT: return value(ret)=-1 errno=90 (Message too long) > RESULT: return value(ret)=-1 errno=90 (Message too long) > EXPECT: return value(ret)=-1 errno=9 (Bad file descriptor) > RESULT: return value(ret)=-1 errno=9 (Bad file descriptor) > EXPECT: return value(ret)=-1 errno=9 (Bad file descriptor) > RESULT: return value(ret)=-1 errno=9 (Bad file descriptor) > EXPECT: return value(ret)=-1 errno=9 (Bad file descriptor) > RESULT: return value(ret)=-1 errno=9 (Bad file descriptor) > EXPECT: return value(ret)=-1 errno=11 (Resource temporarily unavailable) > RESULT: return value(ret)=-1 errno=11 (Resource temporarily unavailable) > EXPECT: return value(ret)=-1 errno=22 (Invalid argument) > RESULT: return value(ret)=-1 errno=22 (Invalid argument) > EXPECT: return value(ret)=-1 errno=22 (Invalid argument) > RESULT: return value(ret)=-1 errno=22 (Invalid argument) > EXPECT: return value(ret)=-1 errno=22 (Invalid argument) > RESULT: return value(ret)=-1 errno=22 (Invalid argument) > EXPECT: return value(ret)=-1 errno=110 (Connection timed out) > RESULT: return value(ret)=-1 errno=110 (Connection timed out) > Ok. It is one of the new tests just added, and, i think community would be fixing that soon. Regards-- Subrata > ------------------------------------------------------------------------------ Are you an open source citizen? Join us for the Open Source Bridge conference! Portland, OR, June 17-19. Two days of sessions, one day of unconference: $250. Need another reason to go? 24-hour hacker lounge. Register today! http://ad.doubleclick.net/clk;215844324;13503038;v?http://opensourcebridge.org _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2009-06-23 15:11 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2009-06-12 8:47 [LTP] I met "You can specify it with option -b" error message GeunSik Lim 2009-06-18 17:31 ` Subrata Modak 2009-06-19 5:11 ` GeunSik Lim 2009-06-19 5:29 ` Subrata Modak 2009-06-19 7:40 ` GeunSik Lim 2009-06-23 14:50 ` Subrata Modak
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox