From: Subrata Modak <subrata@linux.vnet.ibm.com>
To: michal.simek@petalogix.com
Cc: LTP List <ltp-list@lists.sourceforge.net>,
Manas Kumar Nayak <maknayak@in.ibm.com>
Subject: Re: [LTP] [PATCH 06/13] Add/Port ppoll01 test for ppoll() syscall
Date: Fri, 07 Aug 2009 18:11:25 +0530 [thread overview]
Message-ID: <1249648885.4851.37.camel@subratamodak.linux.ibm.com> (raw)
In-Reply-To: <4A7AA8D8.9040100@petalogix.com>
On Thu, 2009-08-06 at 11:56 +0200, Michal Simek wrote:
> Hi,
>
> I am getting fault on x86/Microblaze for ppoll. It is run only one
> testcase than ends.
> Have you ever met with this problem?
I have a different problem however on my x86_32 machine:
$ ./testcases/bin/ppoll01
ppoll01 0 TINFO : (case00) START
open failed.
ppoll01 0 TINFO : (case00) END => NG
ppoll01 0 TINFO : (case01) START
open failed.
ppoll01 0 TINFO : (case01) END => NG
ppoll01 0 TINFO : (case02) START
open failed.
ppoll01 0 TINFO : (case02) END => NG
ppoll01 0 TINFO : (case03) START
open failed.
ppoll01 0 TINFO : (case03) END => NG
ppoll01 0 TINFO : (case04) START
open failed.
ppoll01 0 TINFO : (case04) END => NG
ppoll01 0 TINFO : (case05) START
open failed.
ppoll01 0 TINFO : (case05) END => NG
ppoll01 0 TINFO : (case06) START
open failed.
ppoll01 0 TINFO : (case06) END => NG
ppoll01 1 TFAIL : ppoll01 failed - errno = 2 : No such file or
directory
NG
$ echo $?
1
Regards--
Subrata
>
> Thanks,
> Michal
>
> [monstr@monstr ppoll]$ ./ppoll01
> ppoll01 0 TINFO : (case00) START
> EXPECT: return value(ret)=(N >= 0) errno=0 (Success), r/w check=OK
> RESULT: return value(ret)= 1 errno=0 (Success), r/w check=NG
> ppoll01 0 TINFO : (case00) END => NG
> ppoll01 0 TINFO : (case01) START
>
> [monstr@monstr ppoll]$ echo $?
> 130
> [monstr@monstr ppoll]$
>
>
> > Thanks.
> >
> > Regards--
> > Subrata
> >
> > On Wed, 2009-05-27 at 15:39 +0530, Manas Kumar Nayak wrote:
> >
> >> diff -uprN ltp-intermediate-20090521.orig/testcases/kernel/syscalls/ppoll/Makefile ltp-intermediate-20090521/testcases/kernel/syscalls/ppoll/Makefile
> >> --- ltp-intermediate-20090521.orig/testcases/kernel/syscalls/ppoll/Makefile 1970-01-01 05:30:00.000000000 +0530
> >> +++ ltp-intermediate-20090521/testcases/kernel/syscalls/ppoll/Makefile 2009-05-23 12:01:25.000000000 +0530
> >> @@ -0,0 +1,31 @@
> >> +#
> >> +# Copyright (c) International Business Machines Corp., 2009
> >> +#
> >> +# This program is free software; you can redistribute it and/or modify
> >> +# it under the terms of the GNU General Public License as published by
> >> +# the Free Software Foundation; either version 2 of the License, or
> >> +# (at your option) any later version.
> >> +#
> >> +# This program is distributed in the hope that it will be useful,
> >> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> >> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
> >> +# the GNU General Public License for more details.
> >> +#
> >> +# You should have received a copy of the GNU General Public License
> >> +# along with this program; if not, write to the Free Software
> >> +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> >> +#
> >> +
> >> +CFLAGS += -I../../../../include -Wall -O2
> >> +LDLIBS += -L../../../../lib -lltp
> >> +
> >> +SRCS = $(wildcard *.c)
> >> +TARGETS = $(patsubst %.c,%,$(SRCS))
> >> +
> >> +all: $(TARGETS)
> >> +
> >> +install:
> >> + @set -e; for i in $(TARGETS); do ln -f $$i ../../../bin/$$i ; done
> >> +
> >> +clean:
> >> + rm -f $(TARGETS)
> >> diff -uprN ltp-intermediate-20090521.orig/testcases/kernel/syscalls/ppoll/ppoll01.c ltp-intermediate-20090521/testcases/kernel/syscalls/ppoll/ppoll01.c
> >> --- ltp-intermediate-20090521.orig/testcases/kernel/syscalls/ppoll/ppoll01.c 1970-01-01 05:30:00.000000000 +0530
> >> +++ ltp-intermediate-20090521/testcases/kernel/syscalls/ppoll/ppoll01.c 2009-05-27 13:00:58.000000000 +0530
> >> @@ -0,0 +1,482 @@
> >> +/******************************************************************************/
> >> +/* Copyright (c) Crackerjack Project., 2007-2008 ,Hitachi, Ltd */
> >> +/* Author(s): Takahiro Yasui <takahiro.yasui.mp@hitachi.com>, */
> >> +/* Yumiko Sugita <yumiko.sugita.yf@hitachi.com>, */
> >> +/* Satoshi Fujiwara <sa-fuji@sdl.hitachi.co.jp> */
> >> +/* */
> >> +/* This program is free software; you can redistribute it and/or modify */
> >> +/* it under the terms of the GNU General Public License as published by */
> >> +/* the Free Software Foundation; either version 2 of the License, or */
> >> +/* (at your option) any later version. */
> >> +/* */
> >> +/* This program is distributed in the hope that it will be useful, */
> >> +/* but WITHOUT ANY WARRANTY; without even the implied warranty of */
> >> +/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See */
> >> +/* the GNU General Public License for more details. */
> >> +/* */
> >> +/* You should have received a copy of the GNU General Public License */
> >> +/* along with this program; if not, write to the Free Software */
> >> +/* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */
> >> +/* */
> >> +/******************************************************************************/
> >> +/******************************************************************************/
> >> +/* */
> >> +/* File: ppoll01.c */
> >> +/* */
> >> +/* Description: This tests the ppoll01() syscall */
> >> +/* */
> >> +/* */
> >> +/* */
> >> +/* */
> >> +/* */
> >> +/* */
> >> +/* Usage: <for command-line> */
> >> +/* ppoll01 [-c n] [-e][-i n] [-I x] [-p x] [-t] */
> >> +/* where, -c n : Run n copies concurrently. */
> >> +/* -e : Turn on errno logging. */
> >> +/* -i n : Execute test n times. */
> >> +/* -I x : Execute test for x seconds. */
> >> +/* -P x : Pause for x seconds between iterations. */
> >> +/* -t : Turn on syscall timing. */
> >> +/* */
> >> +/* Total Tests: 1 */
> >> +/* */
> >> +/* Test Name: ppoll01 */
> >> +/* History: Porting from Crackerjack to LTP is done by */
> >> +/* Manas Kumar Nayak maknayak@in.ibm.com> */
> >> +/******************************************************************************/
> >> +#include <sys/syscall.h>
> >> +#include <sys/types.h>
> >> +#include <sys/select.h>
> >> +#include <sys/wait.h>
> >> +#include <getopt.h>
> >> +#include <string.h>
> >> +#include <stdlib.h>
> >> +#include <errno.h>
> >> +#include <stdio.h>
> >> +#include <unistd.h>
> >> +#include <fcntl.h>
> >> +#include <libgen.h>
> >> +#include <limits.h>
> >> +#include <signal.h>
> >> +#include "asm/poll.h"
> >> +
> >> +
> >> +#include "../utils/include_j_h.h"
> >> +#include "../utils/common_j_h.c"
> >> +
> >> +/* Harness Specific Include Files. */
> >> +#include "test.h"
> >> +#include "usctest.h"
> >> +#include "linux_syscall_numbers.h"
> >> +
> >> +/* Extern Global Variables */
> >> +extern int Tst_count; /* counter for tst_xxx routines. */
> >> +extern char *TESTDIR; /* temporary dir created by tst_tmpdir() */
> >> +
> >> +/* Global Variables */
> >> +char *TCID = "ppoll01"; /* Test program identifier.*/
> >> +int testno;
> >> +int TST_TOTAL = 1; /* total number of tests in this file. */
> >> +
> >> +/* Extern Global Functions */
> >> +/******************************************************************************/
> >> +/* */
> >> +/* Function: cleanup */
> >> +/* */
> >> +/* Description: Performs all one time clean up for this test on successful */
> >> +/* completion, premature exit or failure. Closes all temporary */
> >> +/* files, removes all temporary directories exits the test with */
> >> +/* appropriate return code by calling tst_exit() function. */
> >> +/* */
> >> +/* Input: None. */
> >> +/* */
> >> +/* Output: None. */
> >> +/* */
> >> +/* Return: On failure - Exits calling tst_exit(). Non '0' return code. */
> >> +/* On success - Exits calling tst_exit(). With '0' return code. */
> >> +/* */
> >> +/******************************************************************************/
> >> +extern void cleanup() {
> >> + /* Remove tmp dir and all files in it */
> >> + TEST_CLEANUP;
> >> + tst_rmdir();
> >> +
> >> + /* Exit with appropriate return code. */
> >> + tst_exit();
> >> +}
> >> +
> >> +/* Local Functions */
> >> +/******************************************************************************/
> >> +/* */
> >> +/* Function: setup */
> >> +/* */
> >> +/* Description: Performs all one time setup for this test. This function is */
> >> +/* typically used to capture signals, create temporary dirs */
> >> +/* and temporary files that may be used in the course of this */
> >> +/* test. */
> >> +/* */
> >> +/* Input: None. */
> >> +/* */
> >> +/* Output: None. */
> >> +/* */
> >> +/* Return: On failure - Exits by calling cleanup(). */
> >> +/* On success - returns 0. */
> >> +/* */
> >> +/******************************************************************************/
> >> +void setup() {
> >> + /* Capture signals if any */
> >> + /* Create temporary directories */
> >> + TEST_PAUSE;
> >> + tst_tmpdir();
> >> +}
> >> +
> >> +
> >> +/*
> >> + * Macros
> >> + */
> >> +#define SYSCALL_NAME "ppoll"
> >> +
> >> +#ifndef __NR_ppoll
> >> +# define __NR_ppoll 309
> >> +#endif
> >> +
> >> +#ifndef POLLRDHUP
> >> +# define POLLRDHUP 0x2000
> >> +#endif
> >> +
> >> +
> >> +/*
> >> + * Global variables
> >> + */
> >> +static int opt_debug;
> >> +static char *progname;
> >> +static char *progdir;
> >> +
> >> +enum test_type {
> >> + NORMAL,
> >> + MASK_SIGNAL,
> >> + TIMEOUT,
> >> + FD_ALREADY_CLOSED,
> >> + SEND_SIGINT,
> >> + INVALID_NFDS,
> >> + INVALID_FDS,
> >> + MINUS_NSEC,
> >> + TOO_LARGE_NSEC,
> >> +
> >> +};
> >> +
> >> +
> >> +/*
> >> + * Data Structure
> >> + */
> >> +struct test_case {
> >> + short expect_revents;
> >> + int ttype;
> >> + int ret;
> >> + int err;
> >> +};
> >> +
> >> +
> >> +/* Test cases
> >> + *
> >> + * test status of errors on man page
> >> + *
> >> + * EBADF can't check because EBADF never happen even though
> >> + * fd was invalid. In this case, information of invalid
> >> + * fd is set in revents
> >> + * EFAULT v ('fds' array in the invalid address space)
> >> + * EINTR v (a non blocked signal was caught)
> >> + * EINVAL v ('nfds' is over the 'RLIMIT_NOFILE' value)
> >> + * ENOMEM can't check because it's difficult to create no-memory
> >> + */
> >> +
> >> +
> >> +static struct test_case tcase[] = {
> >> + { // case00
> >> + .ttype = NORMAL,
> >> + .expect_revents = POLLOUT,
> >> + .ret = 0,
> >> + .err = 0,
> >> + },
> >> + { // case01
> >> + .ttype = MASK_SIGNAL,
> >> + .expect_revents = 0, // don't care
> >> + .ret = 0,
> >> + .err = 0,
> >> + },
> >> + { // case02
> >> + .ttype = TIMEOUT,
> >> + .expect_revents = 0, // don't care
> >> + .ret = 0,
> >> + .err = 0,
> >> + },
> >> + { // case03
> >> + .ttype = FD_ALREADY_CLOSED,
> >> + .expect_revents = POLLNVAL,
> >> + .ret = 0,
> >> + .err = 0,
> >> + },
> >> + { // case04
> >> + .ttype = SEND_SIGINT,
> >> + .ret = -1,
> >> + .err = EINTR,
> >> + },
> >> + { // case05
> >> + .ttype = INVALID_NFDS,
> >> + .ret = -1,
> >> + .err = EINVAL,
> >> + },
> >> + { // case06
> >> + .ttype = INVALID_FDS,
> >> + .ret = -1,
> >> + .err = EFAULT,
> >> + },
> >> +#if 0
> >> + { // case07
> >> + .ttype = MINUS_NSEC,
> >> + .ret = -1,
> >> + .err = EINVAL, // RHEL4U1 + 2.6.18 returns SUCCESS
> >> + },
> >> + { // case08
> >> + .ttype = TOO_LARGE_NSEC,
> >> + .ret = -1,
> >> + .err = EINVAL, // RHEL4U1 + 2.6.18 returns SUCCESS
> >> + },
> >> +#endif
> >> +};
> >> +
> >> +#define NUM_TEST_FDS 1
> >> +
> >> +/*
> >> + * do_test()
> >> + *
> >> + * Input : TestCase Data
> >> + * Return : RESULT_OK(0), RESULT_NG(1)
> >> + *
> >> + */
> >> +
> >> +static int do_test(struct test_case *tc)
> >> +{
> >> + int sys_ret;
> >> + int sys_errno;
> >> + int result = RESULT_OK;
> >> + int fd = -1 , cmp_ok = 1;
> >> + char fpath[PATH_MAX];
> >> + struct pollfd *p_fds, fds[NUM_TEST_FDS];
> >> + unsigned int nfds = NUM_TEST_FDS;
> >> + struct timespec *p_ts, ts;
> >> + sigset_t *p_sigmask, sigmask;
> >> + size_t sigsetsize = 0;
> >> + pid_t pid = 0;
> >> +
> >> + TEST(fd = setup_file(progdir, "test.file", fpath));
> >> + if (fd < 0)
> >> + return 1;
> >> + fds[0].fd = fd;
> >> + fds[0].events = POLLIN | POLLPRI | POLLOUT | POLLRDHUP;
> >> + fds[0].revents = 0;
> >> + p_fds = fds;
> >> + p_ts = NULL;
> >> + p_sigmask = NULL;
> >> +
> >> + switch (tc->ttype) {
> >> + case TIMEOUT:
> >> + nfds = 0;
> >> + ts.tv_sec = 0;
> >> + ts.tv_nsec = 50000000; // 50msec
> >> + p_ts = &ts;
> >> + break;
> >> + case FD_ALREADY_CLOSED:
> >> + TEST(close(fd));
> >> + fd = -1;
> >> + TEST(cleanup_file(fpath));
> >> + break;
> >> + case MASK_SIGNAL:
> >> + TEST(sigemptyset(&sigmask));
> >> + TEST(sigaddset(&sigmask, SIGINT));
> >> + p_sigmask = &sigmask;
> >> + //sigsetsize = sizeof(sigmask);
> >> + sigsetsize = 8;
> >> + nfds = 0;
> >> + ts.tv_sec = 0;
> >> + ts.tv_nsec = 300000000; // 300msec => need to be enough for
> >> + // waiting the signal
> >> + p_ts = &ts;
> >> + // fallthrough
> >> + case SEND_SIGINT:
> >> + nfds = 0;
> >> + TEST(pid = create_sig_proc(100000, SIGINT)); // 100msec
> >> + if (pid < 0)
> >> + return 1;
> >> + break;
> >> + case INVALID_NFDS:
> >> + //nfds = RLIMIT_NOFILE + 1; ==> RHEL4U1 + 2.6.18 returns SUCCESS
> >> + nfds = -1;
> >> + break;
> >> + case INVALID_FDS:
> >> + p_fds = (void*)0xc0000000;
> >> + break;
> >> + case MINUS_NSEC:
> >> + ts.tv_sec = 0;
> >> + ts.tv_nsec = -1;
> >> + p_ts = &ts;
> >> + break;
> >> + case TOO_LARGE_NSEC:
> >> + ts.tv_sec = 0;
> >> + ts.tv_nsec = 1000000000;
> >> + p_ts = &ts;
> >> + break;
> >> + }
> >> +
> >> + /*
> >> + * Execute system call
> >> + */
> >> + errno = 0;
> >> + TEST(sys_ret = syscall(__NR_ppoll, p_fds, nfds, p_ts, p_sigmask, sigsetsize));
> >> + sys_errno = errno;
> >> + if (sys_ret <= 0 || tc->ret < 0)
> >> + goto TEST_END;
> >> +
> >> + cmp_ok = fds[0].revents == tc->expect_revents;
> >> + if (opt_debug) {
> >> + tst_resm(TINFO,"EXPECT: revents=0x%04x", tc->expect_revents);
> >> + tst_resm(TINFO,"RESULT: revents=0x%04x", fds[0].revents);
> >> + }
> >> +
> >> +TEST_END:
> >> + /*
> >> + * Check results
> >> + */
> >> + result |= (sys_errno != tc->err) || !cmp_ok;
> >> + PRINT_RESULT_CMP(sys_ret >= 0, tc->ret, tc->err, sys_ret, sys_errno,
> >> + cmp_ok);
> >> +
> >> + if (fd >= 0)
> >> + cleanup_file(fpath);
> >> + if (pid > 0) {
> >> + int st;
> >> + kill(pid, SIGTERM);
> >> + wait(&st);
> >> + }
> >> + return result;
> >> +}
> >> +
> >> +
> >> +/*
> >> + * sighandler()
> >> + */
> >> +void sighandler(int sig)
> >> +{
> >> + if (sig == SIGINT)
> >> + return;
> >> + // NOTREACHED
> >> + return;
> >> +}
> >> +
> >> +
> >> +/*
> >> + * usage()
> >> + */
> >> +
> >> +static void usage(const char *progname)
> >> +{
> >> + tst_resm(TINFO,"usage: %s [options]", progname);
> >> + tst_resm(TINFO,"This is a regression test program of %s system call.",SYSCALL_NAME);
> >> + tst_resm(TINFO,"options:");
> >> + tst_resm(TINFO," -d --debug Show debug messages");
> >> + tst_resm(TINFO," -h --help Show this message");
> >> + tst_resm(TINFO,"NG");
> >> + exit(1);
> >> +}
> >> +
> >> +
> >> +/*
> >> + * main()
> >> + */
> >> +
> >> +
> >> +
> >> +int main(int ac, char **av) {
> >> + int result = RESULT_OK;
> >> + int c;
> >> + int i;
> >> + int lc; /* loop counter */
> >> + char *msg; /* message returned from parse_opts */
> >> +
> >> + struct option long_options[] = {
> >> + { "debug", no_argument, 0, 'd' },
> >> + { "help", no_argument, 0, 'h' },
> >> + { NULL, 0, NULL, 0 }
> >> + };
> >> +
> >> + progname = strchr(av[0], '/');
> >> + progname = progname ? progname + 1 : av[0];
> >> +
> >> + progdir = strdup(av[0]);
> >> + progdir = dirname(progdir);
> >> +
> >> + /* parse standard options */
> >> + if ((msg = parse_opts(ac, av, (option_t *)NULL, NULL)) != (char *)NULL){
> >> + tst_brkm(TBROK, cleanup, "OPTION PARSING ERROR - %s", msg);
> >> + tst_exit();
> >> + }
> >> +
> >> + setup();
> >> +
> >> + /* Check looping state if -i option given */
> >> + for (lc = 0; TEST_LOOPING(lc); ++lc) {
> >> + Tst_count = 0;
> >> + for (testno = 0; testno < TST_TOTAL; ++testno) {
> >> + TEST(c = getopt_long(ac, av, "dh", long_options, NULL));
> >> + while(TEST_RETURN != -1) {
> >> + switch (c) {
> >> + case 'd':
> >> + opt_debug = 1;
> >> + break;
> >> + default:
> >> + usage(progname);
> >> + // NOTREACHED
> >> + }
> >> + }
> >> +
> >> +
> >> + if (ac != optind) {
> >> + tst_resm(TINFO,"Options are not match.");
> >> + usage(progname);
> >> + // NOTREACHED
> >> + }
> >> +
> >> + /*
> >> + * Execute test
> >> + */
> >> + for (i = 0; i < (int)(sizeof(tcase) / sizeof(tcase[0])); i++) {
> >> + int ret;
> >> + tst_resm(TINFO,"(case%02d) START", i);
> >> + ret = do_test(&tcase[i]);
> >> + tst_resm(TINFO,"(case%02d) END => %s", i, (ret == 0) ? "OK" : "NG");
> >> + result |= ret;
> >> + }
> >> +
> >> + /*
> >> + * Check results
> >> + */
> >> + switch(result) {
> >> + case RESULT_OK:
> >> + tst_resm(TPASS, "ppoll01 call succeeded ");
> >> + break;
> >> +
> >> + default:
> >> + tst_resm(TFAIL, "%s failed - errno = %d : %s", TCID, TEST_ERRNO, strerror(TEST_ERRNO));
> >> + RPRINTF("NG");
> >> + cleanup();
> >> + tst_exit();
> >> + break;
> >> + }
> >> +
> >> + }
> >> + }
> >> + cleanup();
> >> + tst_exit();
> >> +}
> >> +
> >> --- ltp-intermediate-20090521.orig/runtest/syscalls 2009-05-27 12:58:57.000000000 +0530
> >> +++ ltp-intermediate-20090521/runtest/syscalls 2009-05-27 13:06:52.000000000 +0530
> >> @@ -706,6 +706,8 @@ pipe2_02 pipe2_02
> >>
> >> poll01 poll01
> >>
> >> +ppoll01 ppoll01
> >> +
> >> prctl01 prctl01
> >> prctl02 prctl02
> >>
> >>
> >
> >
> > ------------------------------------------------------------------------------
> > Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT
> > is a gathering of tech-side developers & brand creativity professionals. Meet
> > the minds behind Google Creative Lab, Visual Complexity, Processing, &
> > iPhoneDevCamp as they present alongside digital heavyweights like Barbarian
> > Group, R/GA, & Big Spaceship. http://p.sf.net/sfu/creativitycat-com
> > _______________________________________________
> > Ltp-list mailing list
> > Ltp-list@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/ltp-list
> >
>
>
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
next prev parent reply other threads:[~2009-08-07 12:41 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-27 10:06 [LTP] [PATCH 00/13][2nd Bunch] Port Crackerjack Syscall tests(missing) to LTP Manas Kumar Nayak
2009-05-27 10:07 ` [LTP] [PATCH 01/13] Add/Port Utility Headers for these set of tests Manas Kumar Nayak
2009-05-29 12:55 ` Subrata Modak
2009-05-27 10:07 ` [LTP] [PATCH 02/13] Add/Port get_mempolicy01 test for get_mempolicy() syscall Manas Kumar Nayak
2009-05-29 12:55 ` Subrata Modak
2009-05-27 10:08 ` [LTP] [PATCH 03/13] Add/Port clock_getres01 test for clock_getres() syscall Manas Kumar Nayak
2009-05-29 12:56 ` Subrata Modak
2009-05-27 10:08 ` [LTP] [PATCH 04/13] Add/Port clock_nanosleep01 test for clock_nanosleep() syscall Manas Kumar Nayak
2009-05-29 12:56 ` Subrata Modak
2009-05-27 10:09 ` [LTP] [PATCH 05/13] Add/Port mq_notify01 test for mq_notify() syscall Manas Kumar Nayak
2009-05-29 12:56 ` Subrata Modak
2009-05-27 10:09 ` [LTP] [PATCH 06/13] Add/Port ppoll01 test for ppoll() syscall Manas Kumar Nayak
2009-05-29 12:56 ` Subrata Modak
2009-08-06 9:56 ` Michal Simek
2009-08-07 12:41 ` Subrata Modak [this message]
2009-08-07 20:52 ` Henry Yei
2009-05-27 10:10 ` [LTP] [PATCH 07/13] Add/Port mq_open01 test for mq_open() syscall Manas Kumar Nayak
2009-05-29 12:56 ` Subrata Modak
2009-05-27 10:10 ` [LTP] [PATCH 08/13] Add/Port mq_timedreceive01 test for mq_timedreceive() syscall Manas Kumar Nayak
2009-05-29 12:56 ` Subrata Modak
2009-05-27 10:11 ` [LTP] [PATCH 09/13] Add/Port utimes01 test for utimes() syscall Manas Kumar Nayak
2009-05-29 12:56 ` Subrata Modak
2009-05-27 10:11 ` [LTP] [PATCH 10/13] Add/Port mq_unlink01 test for mq_unlink() syscall Manas Kumar Nayak
2009-05-29 12:56 ` Subrata Modak
2009-05-27 10:12 ` [LTP] [PATCH 11/13] Add/Port mq_timedsend01 test for mq_timedsend() syscall Manas Kumar Nayak
2009-05-29 12:57 ` Subrata Modak
2009-05-27 10:12 ` [LTP] [PATCH 12/13] Add/Port unshare01 test for unshare() syscall Manas Kumar Nayak
2009-05-29 12:57 ` Subrata Modak
2009-05-27 10:13 ` [LTP] [PATCH 13/13] Add/Port unshare02 " Manas Kumar Nayak
2009-05-29 12:57 ` Subrata Modak
2009-05-29 12:55 ` [LTP] [PATCH 00/13][2nd Bunch] Port Crackerjack Syscall tests(missing) to LTP Subrata Modak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1249648885.4851.37.camel@subratamodak.linux.ibm.com \
--to=subrata@linux.vnet.ibm.com \
--cc=ltp-list@lists.sourceforge.net \
--cc=maknayak@in.ibm.com \
--cc=michal.simek@petalogix.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox