From: Jiri Palecek <jpalecek@web.de>
To: ltp-list <ltp-list@lists.sf.net>
Subject: [LTP] [PATCH] Fix some bashisms
Date: Tue, 7 Jul 2009 10:35:44 +0200 [thread overview]
Message-ID: <200907071035.46915.jpalecek@web.de> (raw)
Hello,
this patch reflects the comments by various people to the previous versions. It uses "+=1" instead of postincrement because of dash, ['s boolean expressions, printf for the formatting. I've left the unzip pushd/popd and the signal names issue completely.
Regards
Jiri Palecek
---
runalltests.sh | 58 +++++++++---------
testcases/commands/cron/cron02 | 4 +-
testcases/commands/cron/cron03 | 2 +-
testcases/commands/cron/cron_allow01 | 10 ++--
testcases/commands/cron/cron_deny01 | 14 ++--
testcases/commands/su/su01 | 18 +++---
testcases/kernel/containers/netns/child.sh | 2 +-
testcases/kernel/containers/netns/child_1.sh | 2 +-
testcases/kernel/containers/netns/childipv6.sh | 4 +-
testcases/kernel/containers/netns/childns.sh | 4 +-
testcases/kernel/containers/netns/delchild.sh | 8 +-
testcases/kernel/containers/netns/par_ftp.sh | 2 +-
testcases/kernel/containers/netns/parent.sh | 2 +-
testcases/kernel/containers/netns/parent_1.sh | 2 +-
testcases/kernel/containers/netns/parent_2.sh | 2 +-
testcases/kernel/containers/netns/parentns.sh | 4 +-
testcases/kernel/containers/netns/paripv6.sh | 4 +-
testcases/kernel/containers/netns/rename_net.sh | 6 +-
testcases/kernel/power_management/runpwtests.sh | 32 +++++-----
.../hyperthreading/ht_enabled/smt_smp_enabled.sh | 2 +-
testcases/kernel/syscalls/ioctl/test_ioctl | 4 +-
testcases/misc/tcore_patch_test_suites/tcore.sh | 11 ++--
testcases/network/iproute/ip_tests.sh | 62 ++++++++++----------
testcases/network/ipv6/perf_lan6/perf_lan6 | 4 +-
testcases/network/ipv6/tcpdump6/tcpdump601 | 2 +-
testcases/network/multicast/mc_commo/mc_commo | 4 +-
testcases/network/multicast/mc_member/mc_member | 2 +-
testcases/network/multicast/mc_opts/mc_opts | 2 +-
testcases/network/nfs/nfs03/nfs03 | 26 ++++----
.../network/rpc/basic_tests/rpcinfo/rpcinfo01 | 6 +-
testcases/network/tcp_cmds/perf_lan/perf_lan | 4 +-
testcases/network/tcp_cmds/tcpdump/tcpdump01 | 2 +-
32 files changed, 156 insertions(+), 155 deletions(-)
diff --git a/runalltests.sh b/runalltests.sh
index aa7a7d5..b710469 100755
--- a/runalltests.sh
+++ b/runalltests.sh
@@ -29,17 +29,17 @@
## ##
################################################################################
-echo -e "*******************************************************************"
-echo -e "*******************************************************************"
-echo -e "** **"
-echo -e "** This script is being re-written to cover all aspects of **"
-echo -e "** testing LTP, which includes running all those tests which **"
-echo -e "** are not run by default with ./runltp script. Special setup **"
-echo -e "** in system environment will be done to run all those tests **"
-echo -e "** like the File System tests, SELinuxtest, etc **"
-echo -e "** **"
-echo -e "*******************************************************************"
-echo -e "*******************************************************************"
+echo "*******************************************************************"
+echo "*******************************************************************"
+echo "** **"
+echo "** This script is being re-written to cover all aspects of **"
+echo "** testing LTP, which includes running all those tests which **"
+echo "** are not run by default with ./runltp script. Special setup **"
+echo "** in system environment will be done to run all those tests **"
+echo "** like the File System tests, SELinuxtest, etc **"
+echo "** **"
+echo "*******************************************************************"
+echo "*******************************************************************"
export LTPROOT=${PWD}
export RUN_BALLISTA=0
@@ -210,19 +210,19 @@ export HTML_OUTPUT_FILE_NAME=$LTP_VERSION_$HOSTNAME_$KERNEL_VERSION_$HARDWARE_TY
## The First one i plan to run is the default LTP run ##
## START => Test Series 1 ##
-echo -e "Running Default LTP..."
+echo "Running Default LTP..."
./runltp -g $HTML_OUTPUT_FILE_NAME
-echo -e "Completed running Default LTP\n\n"
+printf "Completed running Default LTP\n\n\n"
## END => Test Series 1 ##
## The next one i plan to run is ballista ##
## START => Test Series 2 ##
if [ $RUN_BALLISTA -eq 1 ]
then
- echo -e "Running Ballista..."
+ echo "Running Ballista..."
export TEST_START_TIME=`date +"%Y_%b_%d-%Hh_%Mm_%Ss"`
./runltp -f ballista -o $LTP_VERSION-BALLISTA_RUN_ON-$HOSTNAME-$KERNEL_VERSION-$HARDWARE_TYPE-$TEST_START_TIME.out
- echo -e "Completed running Ballista\n\n"
+ printf "Completed running Ballista\n\n\n"
fi
## END => Test Series 2 ##
@@ -230,9 +230,9 @@ fi
## START => Test Series 3 ##
if [ $RUN_OPENPOSIX -eq 1 ]
then
- echo -e "Running Open Posix Tests..."
+ echo "Running Open Posix Tests..."
(cd testcases/open_posix_testsuite; make)
- echo -e "Completed running Open Posix Tests\n\n"
+ printf "Completed running Open Posix Tests\n\n\n"
fi
## END => Test Series 3 ##
@@ -242,9 +242,9 @@ fi
## START => Test Series 4 ##
if [ $RUN_MM_CORE_APIS -eq 1 ]
then
- echo -e "Initializing ltp/testcases/kernel/mem/libmm/mm_core_apis ..."
+ echo "Initializing ltp/testcases/kernel/mem/libmm/mm_core_apis ..."
# Check to see if User is Root
- if [ $EUID -ne 0 ]
+ if [ $(id -u) -ne 0 ]
then
echo You need to be root to Install libmm and run mem/libmm/mm_core_apis
echo Aborting ltp/testcases/kernel/mem/libmm/mm_core_apis
@@ -262,13 +262,13 @@ then
else
echo libmm-1.4.2 already installed in your system
fi
- echo -e "Running ltp/testcases/kernel/mem/libmm/mm_core_apis ..."
+ echo "Running ltp/testcases/kernel/mem/libmm/mm_core_apis ..."
(cd testcases/kernel/mem/libmm; \
make; \
make install; \
$LTPROOT/testcases/bin/mm_core_apis; )
fi
- echo -e "Completed running ltp/testcases/kernel/mem/libmm/mm_core_apis...\n\n"
+ printf "Completed running ltp/testcases/kernel/mem/libmm/mm_core_apis...\n\n\n"
fi
## END => Test Series 4 ##
@@ -278,9 +278,9 @@ fi
## START => Test Series 5 ##
if [ $RUN_AIOTESTS -eq 1 ]
then
- echo -e "Initializing ltp/testcases/kernel/io/aio ..."
+ echo "Initializing ltp/testcases/kernel/io/aio ..."
# Check to see if User is Root
- if [ $EUID -ne 0 ]
+ if [ $(id -u) -ne 0 ]
then
echo You need to be root to Install libaio-0.3.92 and run ltp/testcases/kernel/io/aio
echo Aborting ltp/testcases/kernel/io/aio
@@ -298,13 +298,13 @@ if [ $RUN_AIOTESTS -eq 1 ]
else
echo libaio-0.3.92 already installed in your system
fi
- echo -e "Building & Running ltp/testcases/kernel/io/aio..."
+ echo "Building & Running ltp/testcases/kernel/io/aio..."
(cd testcases/kernel/io/aio; \
make > /dev/null; \
./aio01/aio01; \
./aio02/runfstests.sh -a aio02/cases/aio_tio; \
make clean 1>&2 > /dev/null )
- echo -e "Completed running ltp/testcases/kernel/io/aio...\n\n"
+ printf "Completed running ltp/testcases/kernel/io/aio...\n\n\n"
fi
fi
## END => Test Series 5 ##
@@ -316,9 +316,9 @@ fi
## START => Test Series 6 ##
if [ $RUN_FILECAPS -eq 1 ]
then
- echo -e "Initializing ltp/testcases/kernel/security/filecaps ..."
+ echo "Initializing ltp/testcases/kernel/security/filecaps ..."
# Check to see if User is Root
- if [ $EUID -ne 0 ]
+ if [ $(id -u) -ne 0 ]
then
echo You need to be root to Install libcaps and run ltp/testcases/kernel/security/filecaps
echo Aborting ltp/testcases/kernel/security/filecaps
@@ -336,11 +336,11 @@ then
else
echo libcaps already installed in your system
fi
- echo -e "Building & Running ltp/testcases/kernel/security/filecaps"
+ echo "Building & Running ltp/testcases/kernel/security/filecaps"
(cd ltp/testcases/kernel/security/filecaps; \
make && make install > /dev/null; )
./runltp -f filecaps
- echo -e "Completed running ltp/testcases/kernel/io/aio...\n\n"
+ printf "Completed running ltp/testcases/kernel/io/aio...\n\n\n"
fi
fi
## END => Test Series 6 ##
diff --git a/testcases/commands/cron/cron02 b/testcases/commands/cron/cron02
index c1dc245..6e4d8fe 100755
--- a/testcases/commands/cron/cron02
+++ b/testcases/commands/cron/cron02
@@ -37,7 +37,7 @@ TEST_USER_HOMEDIR="/home/$TEST_USER"
do_setup(){
#erase any data from potential defunt cron test
- rm -rf /tmp/crontest &> /dev/null
+ rm -rf /tmp/crontest > /dev/null 2>&1
#erase user if he may exist , so we can have a clean env
rm -rf /home/$TEST_USER
@@ -56,7 +56,7 @@ do_setup(){
# Red Hat uses crond, SuSE/Other uses cron. Check if this is Red Hat/SuSE/Other
tvar=${MACHTYPE%-*}
tvar=${tvar#*-}
-echo "Distro type is: $tvar \n"
+printf "Distro type is: $tvar\n\n"
if [ $tvar != "redhat" -a $tvar != "redhat-linux" ]; then
diff --git a/testcases/commands/cron/cron03 b/testcases/commands/cron/cron03
index 58fbe1b..9448cc4 100755
--- a/testcases/commands/cron/cron03
+++ b/testcases/commands/cron/cron03
@@ -59,7 +59,7 @@ do_setup(){
# Red Hat uses crond, SuSE/Other uses cron. Check if this is Red Hat/SuSE/Other
tvar=${MACHTYPE%-*}
tvar=${tvar#*-}
-echo "Distro type is: $tvar \n"
+printf "Distro type is: $tvar\n\n"
if [ $tvar != "redhat" -a $tvar != "redhat-linux" ]; then
diff --git a/testcases/commands/cron/cron_allow01 b/testcases/commands/cron/cron_allow01
index 839ad81..266700a 100755
--- a/testcases/commands/cron/cron_allow01
+++ b/testcases/commands/cron/cron_allow01
@@ -47,9 +47,9 @@ TEST_USER2_HOME="/home/$TEST_USER2"
do_setup() {
#move any files that may get in the way
- rm /tmp/cron_allow_test &> /dev/null
- rm /tmp/cron_allow_test1 &> /dev/null
- mv $CRON_ALLOW $CRON_ALLOW.old &> /dev/null
+ rm /tmp/cron_allow_test > /dev/null 2>&1
+ rm /tmp/cron_allow_test1 > /dev/null 2>&1
+ mv $CRON_ALLOW $CRON_ALLOW.old > /dev/null 2>&1
#remove users for clean enviroment
su $TEST_USER1 -c "crontab -r"
@@ -90,8 +90,8 @@ do_cleanup(){
userdel $TEST_USER1
userdel $TEST_USER2
rm $CRON_ALLOW
- mv $CRON_ALLOW.old $CRON_ALLOW &> /dev/null
- rm /tmp/cron_allow_test &>/dev/null
+ mv $CRON_ALLOW.old $CRON_ALLOW > /dev/null 2>&1
+ rm /tmp/cron_allow_test >/dev/null 2>&1
}
#-----------------------------------------------------------------------
diff --git a/testcases/commands/cron/cron_deny01 b/testcases/commands/cron/cron_deny01
index f7f8fd4..527d79c 100755
--- a/testcases/commands/cron/cron_deny01
+++ b/testcases/commands/cron/cron_deny01
@@ -49,11 +49,11 @@ TEST_USER2_HOME="/home/$TEST_USER2"
do_setup() {
#move any files that may get in the way
- rm /tmp/cron_deny_test &> /dev/null
- rm /tmp/cron_deny_test1 &> /dev/null
+ rm /tmp/cron_deny_test > /dev/null 2>&1
+ rm /tmp/cron_deny_test1 > /dev/null 2>&1
- mv $CRON_DENY $CRON_DENY.old &> /dev/null
- mv $CRON_ALLOW $CRON_ALLOW.old &> /dev/null
+ mv $CRON_DENY $CRON_DENY.old > /dev/null 2>&1
+ mv $CRON_ALLOW $CRON_ALLOW.old > /dev/null 2>&1
#remove users for clean enviroment
su $TEST_USER1 -c "crontab -r"
@@ -94,9 +94,9 @@ do_cleanup(){
userdel $TEST_USER1
userdel $TEST_USER2
rm $CRON_DENY
- mv $CRON_DENY.old $CRON_DENY &> /dev/null
- mv $CRON_ALLOW.old $CRON_ALLOW &> /dev/null
- rm /tmp/cron_allow_test &>/dev/null
+ mv $CRON_DENY.old $CRON_DENY > /dev/null 2>&1
+ mv $CRON_ALLOW.old $CRON_ALLOW > /dev/null 2>&1
+ rm /tmp/cron_allow_test >/dev/null 2>&1
}
#-----------------------------------------------------------------------
diff --git a/testcases/commands/su/su01 b/testcases/commands/su/su01
index e6b8a05..91548c7 100755
--- a/testcases/commands/su/su01
+++ b/testcases/commands/su/su01
@@ -41,7 +41,7 @@ tvar=${tvar#*-}
# need to export tvar for su01_s1
export tvar
-echo "Machine type is: $tvar \n"
+printf "Machine type is: $tvar\n\n"
if [ $tvar = "redhat" -o $tvar = "redhat-linux" ]
# Need to also set group for TEST_USER2
@@ -76,9 +76,9 @@ export TEST_ENV_FILE2="/tmp/TEST_ENV_FILE_ROOT2"
do_setup(){
#REMOVE ANY TEMPOARY FILES THAT MAY STILL BE AROUND
-rm -f $TEST_ENV_FILE_USER &> /dev/null
-rm -f $TEST_ENV_FILE2 &> /dev/null
-rm -f $TEST_ENV_FILE &> /dev/null
+rm -f $TEST_ENV_FILE_USER > /dev/null 2>&1
+rm -f $TEST_ENV_FILE2 > /dev/null 2>&1
+rm -f $TEST_ENV_FILE > /dev/null 2>&1
#Create 1st test user
@@ -108,7 +108,7 @@ rm -f $TEST_ENV_FILE &> /dev/null
}
fi
- usermod -p $TEST_USER1_ENCRYPTED_PASSWD $TEST_USER1 &> /dev/null
+ usermod -p $TEST_USER1_ENCRYPTED_PASSWD $TEST_USER1 > /dev/null 2>&1
if [ $? != 0 ]
then {
echo "Could not set password for test user $TEST_USER1"
@@ -144,7 +144,7 @@ rm -f $TEST_ENV_FILE &> /dev/null
}
fi
- usermod -p $TEST_USER2_ENCRYPTED_PASSWD $TEST_USER2 &> /dev/null
+ usermod -p $TEST_USER2_ENCRYPTED_PASSWD $TEST_USER2 > /dev/null 2>&1
if [ $? != 0 ]
then {
echo "Could not set password for test user $TEST_USER2"
@@ -164,9 +164,9 @@ do_cleanup() {
userdel $TEST_USER1
userdel $TEST_USER2
#REMOVE ANY TEMPOARY FILES THAT MAY STILL BE AROUND
- rm -f $TEST_ENV_FILE_USER &> /dev/null
- rm -f $TEST_ENV_FILE2 &> /dev/null
- rm -f $TEST_ENV_FILE &> /dev/null
+ rm -f $TEST_ENV_FILE_USER > /dev/null 2>&1
+ rm -f $TEST_ENV_FILE2 > /dev/null 2>&1
+ rm -f $TEST_ENV_FILE > /dev/null 2>&1
}
#-----------------------------------------------------------------------
diff --git a/testcases/kernel/containers/netns/child.sh b/testcases/kernel/containers/netns/child.sh
index a7fbc4b..6e8ed62 100755
--- a/testcases/kernel/containers/netns/child.sh
+++ b/testcases/kernel/containers/netns/child.sh
@@ -34,7 +34,7 @@ export TST_TOTAL
ping -qc 2 $IP1 > /dev/null
- if [ $? == 0 ] ; then
+ if [ $? = 0 ] ; then
tst_resm TINFO "PASS: Pinging ParentNS from ChildNS"
status=0
else
diff --git a/testcases/kernel/containers/netns/child_1.sh b/testcases/kernel/containers/netns/child_1.sh
index d44eebd..1fa71a7 100755
--- a/testcases/kernel/containers/netns/child_1.sh
+++ b/testcases/kernel/containers/netns/child_1.sh
@@ -65,7 +65,7 @@ export TST_TOTAL
# Pinging CHILD2 from CHILD1
debug "INFO: Trying for pinging CHILD2..."
ping -qc 2 $IP4 > /dev/null
- if [ $? == 0 ];
+ if [ $? = 0 ];
then
tst_resm TINFO "PASS: Child2 is pinging from CHILD1 !"
else
diff --git a/testcases/kernel/containers/netns/childipv6.sh b/testcases/kernel/containers/netns/childipv6.sh
index 4e904be..54bd6e6 100755
--- a/testcases/kernel/containers/netns/childipv6.sh
+++ b/testcases/kernel/containers/netns/childipv6.sh
@@ -52,7 +52,7 @@ status=0
#starting the sshd inside the child NS
/usr/sbin/sshd -p $PORT
- if [ $? == 0 ]; then
+ if [ $? = 0 ]; then
debug "INFO: started the sshd @ port no $PORT"
sshpid=`ps -ef | grep "sshd -p $PORT" | awk '{ print $2 ; exit 0} ' `
else
@@ -68,7 +68,7 @@ status=0
# checking if parent ns responding
ping6 -I $vnet1 -qc 2 $parIPv6 >/dev/null 2>&1
- if [ $? == 0 ] ; then
+ if [ $? = 0 ] ; then
tst_resm TINFO "IPv6: Pinging Parent from Child: PASS"
else
tst_resm TFAIL "IPv6: Pinging Parent from Child: FAIL"
diff --git a/testcases/kernel/containers/netns/childns.sh b/testcases/kernel/containers/netns/childns.sh
index 6fe47ab..5a831ba 100755
--- a/testcases/kernel/containers/netns/childns.sh
+++ b/testcases/kernel/containers/netns/childns.sh
@@ -41,7 +41,7 @@ export TST_TOTAL
. initialize.sh
status=0
- if [ $# == 1 ] ; then
+ if [ $# = 1 ] ; then
childscrpt=$1
debug "INFO: The script to be executed in child NS is $childscrpt"
fi
@@ -63,7 +63,7 @@ status=0
#starting the sshd inside the child NS
/usr/sbin/sshd -p $PORT
- if [ $? == 0 ]; then
+ if [ $? = 0 ]; then
debug "INFO: started the sshd @ port no $PORT"
sshpid=`ps -ef | grep "sshd -p $PORT" | awk '{ print $2 ; exit 0} ' `
else
diff --git a/testcases/kernel/containers/netns/delchild.sh b/testcases/kernel/containers/netns/delchild.sh
index 88822f2..d294e26 100755
--- a/testcases/kernel/containers/netns/delchild.sh
+++ b/testcases/kernel/containers/netns/delchild.sh
@@ -41,7 +41,7 @@ export TST_TOTAL
newnet=`cat /tmp/FIFO4`
debug "INFO: new dev is $newnet"
- if [ $newnet == -1 ] ; then
+ if [ $newnet = -1 ] ; then
status=-1
fi
@@ -50,17 +50,17 @@ export TST_TOTAL
debug "INFO: Deleting the child NS created.. "
debug "INFO: Killing processes $sshpid $pid"
kill -9 $sshpid $pid > /dev/null 2>&1
sleep 1
ls /sys/class/net > /tmp/sys_aftr_child_killed
diff -q /tmp/sys_b4_child_killed /tmp/sys_aftr_child_killed
- if [ $? == 0 ] ; then
+ if [ $? = 0 ] ; then
debug "INFO: No difference in the contents of sysfs after deleting the child"
else
grep -qw $newnet /tmp/sys_aftr_child_killed
- if [ $? == 0 ]; then
+ if [ $? = 0 ]; then
debug "INFO: Device $newnet is moved to ParentNS"
else
debug "INFO: Device $newnet is moved under diff name in ParentNS"
diff --git a/testcases/kernel/containers/netns/par_ftp.sh b/testcases/kernel/containers/netns/par_ftp.sh
index fa672a4..3bfb47b 100755
--- a/testcases/kernel/containers/netns/par_ftp.sh
+++ b/testcases/kernel/containers/netns/par_ftp.sh
@@ -35,7 +35,7 @@ export TST_TOTAL
ping -q -c 2 $IP2 > /dev/null
- if [ $? == 0 ] ; then
+ if [ $? = 0 ] ; then
tst_resm TINFO "Pinging ChildNS from ParentNS"
else
tst_resm TFAIL "Error: Unable to ping ChildNS from ParentNS"
diff --git a/testcases/kernel/containers/netns/parent.sh b/testcases/kernel/containers/netns/parent.sh
index a12f284..61bb500 100755
--- a/testcases/kernel/containers/netns/parent.sh
+++ b/testcases/kernel/containers/netns/parent.sh
@@ -33,7 +33,7 @@ export TST_COUNT
export TST_TOTAL
ping -q -c 2 $IP2 > /dev/null
- if [ $? == 0 ] ; then
+ if [ $? = 0 ] ; then
tst_resm TINFO "PASS: Pinging ChildNS from ParentNS"
status=0
else
diff --git a/testcases/kernel/containers/netns/parent_1.sh b/testcases/kernel/containers/netns/parent_1.sh
index b42436e..1b91a58 100755
--- a/testcases/kernel/containers/netns/parent_1.sh
+++ b/testcases/kernel/containers/netns/parent_1.sh
@@ -38,7 +38,7 @@ export TST_TOTAL
create_veth
vnet0=$dev0
vnet1=$dev1
- if [[ -z $vnet0 || -z $vnet1 ]] ; then
+ if [ -z "$vnet0" -o -z "$vnet1" ] ; then
tst_resm TFAIL "Error: unable to create veth pair in $0"
exit -1
else
diff --git a/testcases/kernel/containers/netns/parent_2.sh b/testcases/kernel/containers/netns/parent_2.sh
index 86eb172..c39bc7c 100755
--- a/testcases/kernel/containers/netns/parent_2.sh
+++ b/testcases/kernel/containers/netns/parent_2.sh
@@ -35,7 +35,7 @@ export TST_TOTAL
vnet2=$dev0
vnet3=$dev1
- if [[ -z $vnet2 || -z $vnet3 ]] ; then
+ if [ -z "$vnet2" -o -z "$vnet3" ] ; then
tst_resm TFAIL "Error: unable to create veth pair in $0"
exit -1
else
diff --git a/testcases/kernel/containers/netns/parentns.sh b/testcases/kernel/containers/netns/parentns.sh
index 43cdcdb..b6488a4 100755
--- a/testcases/kernel/containers/netns/parentns.sh
+++ b/testcases/kernel/containers/netns/parentns.sh
@@ -43,7 +43,7 @@ export TST_TOTAL
status=0
# Checks if any script is passed as argument.
- if [ $# == 2 ]; then
+ if [ $# = 2 ]; then
scrpt=$1
debug "INFO: Script to be executed in parent NS is $scrpt"
fi
@@ -56,7 +56,7 @@ status=0
create_veth
vnet0=$dev0
vnet1=$dev1
- if [[ -z $vnet0 || -z $vnet1 ]] ; then
+ if [ -z "$vnet0" -o -z "$vnet1" ] ; then
tst_resm TFAIL "Error: unable to create veth pair"
exit -1
else
diff --git a/testcases/kernel/containers/netns/paripv6.sh b/testcases/kernel/containers/netns/paripv6.sh
index 568c86f..67c8636 100755
--- a/testcases/kernel/containers/netns/paripv6.sh
+++ b/testcases/kernel/containers/netns/paripv6.sh
@@ -49,7 +49,7 @@ status=0
create_veth
vnet0=$dev0
vnet1=$dev1
- if [[ -z $vnet0 || -z $vnet1 ]] ; then
+ if [ -z "$vnet0" -o -z "$vnet1" ] ; then
tst_resm TFAIL "Error: unable to create veth pair"
exit -1
else
@@ -76,7 +76,7 @@ status=0
echo $parIPv6 > /tmp/FIFO4
ping6 -I $vnet0 -qc 2 $childIPv6 >/dev/null 2>&1
- if [ $? == 0 ] ; then
+ if [ $? = 0 ] ; then
tst_resm TINFO "IPv6: Pinging child from parent: PASS"
status=0
else
diff --git a/testcases/kernel/containers/netns/rename_net.sh b/testcases/kernel/containers/netns/rename_net.sh
index cadf7e2..ffbe07f 100755
--- a/testcases/kernel/containers/netns/rename_net.sh
+++ b/testcases/kernel/containers/netns/rename_net.sh
@@ -46,9 +46,9 @@ export TST_TOTAL
ip link set $vnet1 name $newdev
ifconfig $newdev $IP2/24 up > /dev/null 2>&1
- if [ $? == 0 ] ; then
+ if [ $? = 0 ] ; then
tst_resm TINFO "Successfully Renamed device to $newdev"
- if [ DEBUG == 1 ]; then
+ if [ "$DEBUG" = 1 ]; then
ifconfig
fi
else
@@ -56,7 +56,7 @@ export TST_TOTAL
status=-1
fi
- if [ $status == 0 ] ; then
+ if [ $status = 0 ] ; then
echo $sshpid > /tmp/FIFO3
echo $newdev > /tmp/FIFO4
else
diff --git a/testcases/kernel/power_management/runpwtests.sh b/testcases/kernel/power_management/runpwtests.sh
index 00c8126..e1a25ce 100755
--- a/testcases/kernel/power_management/runpwtests.sh
+++ b/testcases/kernel/power_management/runpwtests.sh
@@ -77,7 +77,7 @@ else
fi
# Test sched_smt_power_savings interface on HT machines
-((TST_COUNT= $TST_COUNT + 1))
+: $(( TST_COUNT += 1 ))
if [ -f /sys/devices/system/cpu/sched_smt_power_savings ] ; then
if test_sched_smt.sh; then
tst_resm TPASS "SCHED_SMT sysfs test"
@@ -96,7 +96,7 @@ fi
# Checking cpufreq sysfs interface files
#check_config.sh config_cpu_freq || RC=$?
-((TST_COUNT= $TST_COUNT + 1))
+: $(( TST_COUNT += 1 ))
if [ -d /sys/devices/system/cpu/cpu0/cpufreq ] ; then
if check_cpufreq_sysfs_files.sh; then
tst_resm TPASS "CPUFREQ sysfs tests"
@@ -106,7 +106,7 @@ if [ -d /sys/devices/system/cpu/cpu0/cpufreq ] ; then
fi
# Changing governors
- ((TST_COUNT= $TST_COUNT + 1))
+ : $(( TST_COUNT += 1 ))
if change_govr.sh; then
tst_resm TPASS "Changing governors "
else
@@ -115,7 +115,7 @@ if [ -d /sys/devices/system/cpu/cpu0/cpufreq ] ; then
fi
# Changing frequencies
- ((TST_COUNT= $TST_COUNT + 1))
+ : $(( TST_COUNT += 1 ))
if change_freq.sh ; then
tst_resm TPASS "Changing frequncies "
else
@@ -124,7 +124,7 @@ if [ -d /sys/devices/system/cpu/cpu0/cpufreq ] ; then
fi
# Loading and Unloading governor related kernel modules
- ((TST_COUNT= $TST_COUNT + 1))
+ : $(( TST_COUNT += 1 ))
if pwkm_load_unload.sh ; then
tst_resm TPASS "Loading and Unloading of governor kernel \
modules"
@@ -138,7 +138,7 @@ else
fi
# Checking cpuidle sysfs interface files
-(( TST_COUNT= $TST_COUNT +1))
+: $(( TST_COUNT+=1))
if check_cpuidle_sysfs_files.sh ; then
tst_resm TPASS "CPUIDLE sysfs tests passed"
else
@@ -154,21 +154,21 @@ test cannot run"
else
get_max_sched_mc; max_sched_mc=$?
for sched_mc in `seq 0 $max_sched_mc`; do
- (( TST_COUNT= $TST_COUNT +1))
+ : $(( TST_COUNT+=1))
sched_domain.py -c $sched_mc; RC=$?
analyze_sched_domain_result $sched_mc $RC
if [ $hyper_threaded -eq $YES ]; then
get_max_sched_smt ; max_sched_smt=$?
for sched_smt in `seq 0 $max_sched_smt`; do
# Testcase to validate sched_domain tree
- (( TST_COUNT= $TST_COUNT +1))
+ : $(( TST_COUNT+=1))
sched_domain.py -c $sched_mc -t $sched_smt; RC=$?
analyze_sched_domain_result $sched_mc $RC $sched_smt ;
done
fi
done
fi
-if [ $# -gt 0 -a $1 == "-exclusive" ]; then
+if [ $# -gt 0 -a "$1" = "-exclusive" ]; then
# Test CPU consolidation
which python > /dev/null
if [ $? -ne 0 ] ; then
@@ -180,12 +180,12 @@ if [ $# -gt 0 -a $1 == "-exclusive" ]; then
for sched_mc in `seq 0 $max_sched_mc`; do
for work_load in ${work_loads_list}
do
- ((TST_COUNT= $TST_COUNT + 1))
+ : $(( TST_COUNT += 1 ))
sched_mc_pass_cnt=0
for repeat_test in `seq 1 10`; do
#Testcase to validate CPU consolidation for sched_mc
if cpu_consolidation.py -c $sched_mc -w $work_load ; then
- ((sched_mc_pass_cnt= $sched_mc_pass_cnt +1))
+ : $(( sched_mc_pass_cnt += 1 ))
fi
done
analyze_consolidation_result $sched_mc $work_load $sched_mc_pass_cnt
@@ -193,13 +193,13 @@ if [ $# -gt 0 -a $1 == "-exclusive" ]; then
if [ $hyper_threaded -eq $YES ]; then
for sched_smt in `seq 0 $max_sched_smt`; do
for work_load in ${work_loads_list}; do
- ((TST_COUNT= $TST_COUNT + 1))
+ : $(( TST_COUNT += 1 ))
sched_mc_smt_pass_cnt=0
for repeat_test in `seq 1 10`; do
# Testcase to validate CPU consolidation for
# for sched_mc & sched_smt with stress=50%
if cpu_consolidation.py -c $sched_mc -t $sched_smt -w $work_load; then
- ((sched_mc_smt_pass_cnt= $sched_mc_smt_pass_cnt +1))
+ : $(( sched_mc_smt_pass_cnt += 1 ))
fi
done
analyze_consolidation_result $sched_mc $work_load $sched_mc_smt_pass_cnt $sched_smt
@@ -207,10 +207,10 @@ if [ $# -gt 0 -a $1 == "-exclusive" ]; then
#Testcase to validate consolidation at core level
sched_mc_smt_pass_cnt=0
stress="thread"
- ((TST_COUNT= $TST_COUNT + 1))
+ : $(( TST_COUNT += 1 ))
for repeat_test in `seq 1 10`; do
if cpu_consolidation.py -c $sched_mc -t $sched_smt -w $work_load -s $stress; then
- ((sched_mc_smt_pass_cnt= $sched_mc_smt_pass_cnt +1))
+ : $(( sched_mc_smt_pass_cnt += 1 ))
fi
done
analyze_consolidation_result $sched_mc $work_load $sched_mc_smt_pass_cnt $sched_smt $stress
diff --git a/testcases/kernel/sched/hyperthreading/ht_enabled/smt_smp_enabled.sh b/testcases/kernel/sched/hyperthreading/ht_enabled/smt_smp_enabled.sh
index 85d42a3..8b8a909 100755
--- a/testcases/kernel/sched/hyperthreading/ht_enabled/smt_smp_enabled.sh
+++ b/testcases/kernel/sched/hyperthreading/ht_enabled/smt_smp_enabled.sh
@@ -64,7 +64,7 @@ else
cpu_cores=`cat /proc/cpuinfo | grep "cpu cores" | cut -f 2 -d ':'\
| sed 's/ //' | uniq`
- if [ $cpu_cores == 1 ];then
+ if [ $cpu_cores -eq 1 ];then
tst_resm TPASS "SMT is enable"
elif [ $cpu_cores -ge 2 ];then
tst_resm TPASS "SMP System"
diff --git a/testcases/kernel/syscalls/ioctl/test_ioctl b/testcases/kernel/syscalls/ioctl/test_ioctl
index 2ea3e39..7ae9e71 100755
--- a/testcases/kernel/syscalls/ioctl/test_ioctl
+++ b/testcases/kernel/syscalls/ioctl/test_ioctl
@@ -25,7 +25,7 @@ export TST_COUNT=0
for tttype in `ls /dev/tty*`
do
-device_no=${tttype:8}
+device_no=${tttype#/dev/tty}
case "$device_no" in
[0-9]|[0-9][0-9])
tst_resm TINFO "Testing ioctl01 with $tttype"
@@ -43,7 +43,7 @@ done
for tttype in `ls /dev/tty*`
do
-device_no=${tttype:8}
+device_no=${tttype#/dev/tty}
case "$device_no" in
[0-9]|[0-9][0-9])
tst_resm TINFO "Testing ioctl02 with $tttype"
diff --git a/testcases/misc/tcore_patch_test_suites/tcore.sh b/testcases/misc/tcore_patch_test_suites/tcore.sh
index f087fa7..4b032dc 100755
--- a/testcases/misc/tcore_patch_test_suites/tcore.sh
+++ b/testcases/misc/tcore_patch_test_suites/tcore.sh
@@ -107,13 +107,13 @@ Test_gen_core()
rm -f core.*
fi
pid=`$BIN_DIR/tcore |grep "consumer pid"|awk '{print $2}'|cut -d = -f 2`
- echo -e "Test whether we can generate the needed core file"
+ echo "Test whether we can generate the needed core file"
if [ -f core.* ];then
- echo -e "PASS"
+ echo "PASS"
pass=`expr $pass + 1`
return 0
else
- echo -e "FAIL"
+ echo "FAIL"
fail=`expr $fail + 1`
return 1
fi
@@ -124,14 +124,14 @@ Test_core_file()
cd $TEST_DIR
prepare_gdb
mv -f $TEST_DIR/core.* $TEST_DIR/corefile >/dev/null 2>&1
- echo -e "Test whether the core support bt,fpu and threads commands "
+ echo "Test whether the core support bt,fpu and threads commands "
expect $BIN_DIR/tcore.exp
return=$?
pass=`expr $pass + $return`
fail=`expr 3 - $return + $fail`
}
-echo -e "Test Tcore patch "
+echo "Test Tcore patch "
check_install
Test_gen_core
Test_core_file
diff --git a/testcases/network/iproute/ip_tests.sh b/testcases/network/iproute/ip_tests.sh
index c622700..59322b6 100755
--- a/testcases/network/iproute/ip_tests.sh
+++ b/testcases/network/iproute/ip_tests.sh
@@ -61,7 +61,7 @@ init()
trap "cleanup" 0
# create the tmp directory for this testcase.
- mkdir -p $LTPTMP/ &>/dev/null || RC=$?
+ mkdir -p $LTPTMP/ >/dev/null 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_brkm TBROK "INIT: Unable to create temporary directory"
@@ -69,7 +69,7 @@ init()
fi
# Check to see if test harness functions are in the path.
- which tst_resm &>$LTPTMP/tst_ip.err || RC=$?
+ which tst_resm >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_brkm TBROK NULL \
@@ -77,7 +77,7 @@ init()
return $RC
fi
- which awk &>$LTPTMP/tst_ip.err || RC=$?
+ which awk >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_brkm TBROK NULL \
@@ -85,7 +85,7 @@ init()
return $RC
fi
- which ip &>$LTPTMP/tst_ip.err || RC=$?
+ which ip >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_brkm TBROK NULL \
@@ -93,7 +93,7 @@ init()
return $RC
fi
- which ifconfig &>$LTPTMP/tst_ip.err || RC=$?
+ which ifconfig >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_brkm TBROK NULL \
@@ -104,13 +104,13 @@ init()
tst_resm TINFO "INIT: Inititalizing tests."
# Aliasing eth0 to create private network.
- /sbin/ifconfig eth0:1 10.1.1.12 &>$LTPTMP/tst_ip.err || RC=$?
+ /sbin/ifconfig eth0:1 10.1.1.12 >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_brk TBROK "INIT: failed aliasing eth0:1 with IP 10.1.1.12"
return $RC
else
- /sbin/route add -host 10.1.1.12 dev eth0:1 &>$LTPTMP/tst_ip.err \
+ /sbin/route add -host 10.1.1.12 dev eth0:1 >$LTPTMP/tst_ip.err 2>&1 \
|| RC=$?
if [ $RC -ne 0 ]
then
@@ -153,10 +153,10 @@ cleanup()
TST_COUNT=0
RC=0
- /sbin/ifconfig eth0:1 &>$LTPTMP/tst_ip.err || RC=$?
+ /sbin/ifconfig eth0:1 >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -eq 0 ]
then
- /sbin/ifconfig eth0:1 down &>$LTPTMP/tst_ip.err
+ /sbin/ifconfig eth0:1 down >$LTPTMP/tst_ip.err 2>&1
fi
rm -fr $LTPTMP
@@ -187,7 +187,7 @@ test01()
tst_resm TINFO "Test #1: changing mtu size of eth0:1 device."
- ip link set eth0:1 mtu 300 &>$LTPTMP/tst_ip.err
+ ip link set eth0:1 mtu 300 >$LTPTMP/tst_ip.err 2>&1
if [ $RC -ne 0 ]
then
tst_res TFAIL $LTPTMP/tst_ip.err \
@@ -232,7 +232,7 @@ test02()
tst_resm TINFO \
"Test #2: Installing dummy.o in kernel"
- modprobe dummy &>$LTPTMP/tst_ip.out || RC=$?
+ modprobe dummy >$LTPTMP/tst_ip.out 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_brk TBROK $LTPTMP/tst_ip.out NULL \
@@ -240,7 +240,7 @@ test02()
return $RC
fi
- ip link show dummy0 | grep dummy0 &>$LTPTMP/tst_ip.err || RC=$?
+ ip link show dummy0 | grep dummy0 >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_res TFAIL $LTPTMP/tst_ip.err "Test #2: ip command failed. Reason:"
@@ -278,7 +278,7 @@ test03()
tst_resm TINFO \
"Test #3: ip addr add - adds a new protolcol address to the device"
- ip addr add 127.6.6.6 dev lo &>$LTPTMP/tst_ip.err || RC=$?
+ ip addr add 127.6.6.6 dev lo >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_res TFAIL $LTPTMP/tst_ip.err \
@@ -287,7 +287,7 @@ test03()
else
tst_resm TINFO \
"Test #3: ip addr show dev <device> - shows protocol address."
- ip addr show dev lo | grep 127.6.6.6 &>$LTPTMP/tst_ip.err || RC=$?
+ ip addr show dev lo | grep 127.6.6.6 >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_res TFAIL $LTPTMP/tst_ip.err \
@@ -297,14 +297,14 @@ test03()
tst_resm TINFO \
"Test #3: ip addr del <ip> dev <device> - deletes protocol address."
- ip addr del 127.6.6.6 dev lo &>$LTPTMP/tst_ip.err || RC=$?
+ ip addr del 127.6.6.6 dev lo >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_res TFAIL $LTPTMP/tst_ip.err \
"Test #3: ip addr del command failed. Reason: "
return $RC
else
- ip addr show dev lo | grep 127.6.6.6 &>$LTPTMP/tst_ip.err || RC=$?
+ ip addr show dev lo | grep 127.6.6.6 >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -eq 0 ]
then
tst_res TFAIL $LTPTMP/tst_ip.err \
@@ -343,7 +343,7 @@ test04()
tst_resm TINFO \
"Test #4: ip neigh add - adds a new neighbour to arp tables."
- ip neigh add 127.0.0.1 dev lo nud reachable &>$LTPTMP/tst_ip.err || RC=$?
+ ip neigh add 127.0.0.1 dev lo nud reachable >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_res TFAIL $LTPTMP/tst_ip.err \
@@ -357,7 +357,7 @@ test04()
127.0.0.1 dev lo lladdr 00:00:00:00:00:00 nud reachable
EOF
- ip neigh show 127.0.0.1 | head -n1 &>$LTPTMP/tst_ip.out || RC=$?
+ ip neigh show 127.0.0.1 | head -n1 >$LTPTMP/tst_ip.out 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_res TFAIL $LTPTMP/tst_ip.err \
@@ -365,7 +365,7 @@ test04()
return $RC
else
diff -iwB $LTPTMP/tst_ip.out $LTPTMP/tst_ip.exp \
- &>$LTPTMP/tst_ip.err || RC=$?
+ >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_res FAIL $LTPTMP/tst_ip.err \
@@ -377,14 +377,14 @@ test04()
tst_resm TINFO \
"Test #4: ip neigh del - deletes neighbour from the arp table."
- ip neigh del 127.0.0.1 dev lo &>$LTPTMP/tst_ip.err || RC=$?
+ ip neigh del 127.0.0.1 dev lo >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_res TFAIL $LTPTMP/tst_ip.err \
"Test #4: ip neigh del command failed return = $RC. Reason: "
return $RC
else
- ip neigh show | grep 127.0.0.1 grep -v "nud failed$" &>$LTPTMP/tst_ip.err || RC=$?
+ ip neigh show | grep 127.0.0.1 grep -v "nud failed$" >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -eq 0 ]
then
tst_res TFAIL $LTPTMP/tst_ip.err \
@@ -426,7 +426,7 @@ test05()
tst_resm TINFO \
"Test #5: create an interface with inet 10.6.6.6 alias to eth0"
- ifconfig eth0:1 10.6.6.6 netmask 255.255.255.0 &>$LTPTMP/tst_ip.err || RC=$?
+ ifconfig eth0:1 10.6.6.6 netmask 255.255.255.0 >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_brk TBROK $LTPTMP/tst_ip.err NULL \
@@ -434,7 +434,7 @@ test05()
return $RC
fi
- ip route add 10.6.6.6 via 127.0.0.1 &>$LTPTMP/tst_ip.err || RC=$?
+ ip route add 10.6.6.6 via 127.0.0.1 >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_res TFAIL $LTPTMP/tst_ip.err \
@@ -449,7 +449,7 @@ test05()
10.6.6.6 via 127.0.0.1 dev lo
EOF
- ip route show | head -n1 &>$LTPTMP/tst_ip.out || RC=$?
+ ip route show | head -n1 >$LTPTMP/tst_ip.out 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_res TFAIL $LTPTMP/tst_ip.err \
@@ -457,7 +457,7 @@ test05()
return $RC
else
diff -iwB $LTPTMP/tst_ip.out $LTPTMP/tst_ip.exp \
- &>$LTPTMP/tst_ip.err || RC=$?
+ >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_res FAIL $LTPTMP/tst_ip.err \
@@ -469,14 +469,14 @@ test05()
tst_resm TINFO \
"Test #5: ip route del - deletes route from the route table."
- ip route del 10.6.6.6 via 127.0.0.1 &>$LTPTMP/tst_ip.err || RC=$?
+ ip route del 10.6.6.6 via 127.0.0.1 >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_res TFAIL $LTPTMP/tst_ip.err \
"Test #5: ip route del command failed return = $RC. Reason: "
return $RC
else
- ip route show | grep 127.0.0.1 &>$LTPTMP/tst_ip.err || RC=$?
+ ip route show | grep 127.0.0.1 >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -eq 0 ]
then
tst_res TFAIL $LTPTMP/tst_ip.err \
@@ -514,7 +514,7 @@ test06()
tst_resm TINFO \
"Test #6: ip maddr add - adds a new multicast addr"
- ifconfig eth0:1 10.6.6.6 netmask 255.255.255.0 &>$LTPTMP/tst_ip.err || RC=$?
+ ifconfig eth0:1 10.6.6.6 netmask 255.255.255.0 >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_brk TBROK $LTPTMP/tst_ip.err NULL \
@@ -522,7 +522,7 @@ test06()
return $RC
fi
- ip maddr add 66:66:00:00:00:66 dev eth0:1 &>$LTPTMP/tst_ip.err || RC=$?
+ ip maddr add 66:66:00:00:00:66 dev eth0:1 >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_res TFAIL $LTPTMP/tst_ip.err \
@@ -536,7 +536,7 @@ test06()
link 66:66:00:00:00:66 static
EOF
- ip maddr show | grep "66:66:00:00:00:66" &>$LTPTMP/tst_ip.out || RC=$?
+ ip maddr show | grep "66:66:00:00:00:66" >$LTPTMP/tst_ip.out 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_res TFAIL $LTPTMP/tst_ip.err \
@@ -556,7 +556,7 @@ test06()
tst_resm TINFO \
"Test #6: ip maddr del - deletes multicast addr."
- ip maddr del 66:66:00:00:00:66 dev eth0:1 &>$LTPTMP/tst_ip.err || RC=$?
+ ip maddr del 66:66:00:00:00:66 dev eth0:1 >$LTPTMP/tst_ip.err 2>&1 || RC=$?
if [ $RC -ne 0 ]
then
tst_res TFAIL $LTPTMP/tst_ip.err \
diff --git a/testcases/network/nfs/nfs03/nfs03 b/testcases/network/nfs/nfs03/nfs03
index 8cbd3a4..bbc79e9 100755
--- a/testcases/network/nfs/nfs03/nfs03
+++ b/testcases/network/nfs/nfs03/nfs03
@@ -91,10 +91,10 @@ fs_inod()
#
# RETURNS: None.
#=============================================================================
-function err_log
+err_log()
{
error "$1"
- let step_errors="$step_errors + 1"
+ : $(($step_errors+=1))
}
@@ -107,7 +107,7 @@ function err_log
#
# RETURNS: None.
#=============================================================================
-function make_subdirs
+make_subdirs()
{
i=0;
while [ "$i" -lt "$numsubdirs" ]; do
@@ -115,7 +115,7 @@ function make_subdirs
echo "$0: mkdir dir$i"
mkdir -p dir$i || echo "mkdir dir$i FAILED"
}
- let i="$i + 1"
+ : $(( i += 1 ))
done;
}
@@ -129,7 +129,7 @@ function make_subdirs
#
# RETURNS: None.
#=============================================================================
-function touch_files
+touch_files()
{
echo "$0: touch files [0-$numsubdirs]/file$numsubdirs[0-$numfiles]"
j=0;
@@ -140,10 +140,10 @@ function touch_files
while [ "$k" -lt "$numfiles" ]; do
>file$j$k || err_log ">file$j$k FAILED"
- let k="$k + 1"
+ : $(( k += 1 ))
done
- let j="$j + 1"
+ : $(( j += 1 ))
cd ..
done
}
@@ -158,7 +158,7 @@ function touch_files
#
# RETURNS: None.
#=============================================================================
-function rm_files
+rm_files()
{
echo "$0: rm files [0-$numsubdirs]/file$numsubdirs[0-$numfiles]"
j=0;
@@ -169,10 +169,10 @@ function rm_files
while [ "$k" -lt "$numfiles" ]; do
rm -f file$j$k || err_log "rm -f file$j$k FAILED"
- let k="$k + 1"
+ : $(( k += 1 ))
done
- let j="$j + 1"
+ : $(( j += 1 ))
cd ..
done
}
@@ -187,7 +187,7 @@ function rm_files
#
# RETURNS: None.
#=============================================================================
-function step1
+step1()
{
echo "=============================================="
echo "MULTIPLE PROCESSES CREATING AND DELETING FILES"
@@ -240,7 +240,7 @@ function step1
rm_files &
pid2=$!
- let i="$i + 1"
+ : $(( i += 1 ))
done
# wait for all background processes to complete execution
@@ -376,7 +376,7 @@ $trace_logic
echo "fs_inod starting on $TCtmp."
fs_inod $TCtmp $DIR_NUM $FILE_NUM 1
retval=$?
- echo $"fs_inod on $TCtmp finished."
+ echo "fs_inod on $TCtmp finished."
if [ "$retval" != 0 ]; then
end_testcase "Errors have resulted from this test: fs_inod returned $retval."
--
1.6.3.3
------------------------------------------------------------------------------
Enter the BlackBerry Developer Challenge
This is your chance to win up to $100,000 in prizes! For a limited time,
vendors submitting new applications to BlackBerry App World(TM) will have
the opportunity to enter the BlackBerry Developer Challenge. See full prize
details at: http://p.sf.net/sfu/blackberry
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
next reply other threads:[~2009-07-07 10:36 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-07 8:35 Jiri Palecek [this message]
2009-07-07 15:32 ` [LTP] [PATCH] Fix some bashisms Subrata Modak
2009-07-07 16:26 ` Garrett Cooper
2009-07-08 19:05 ` Mike Frysinger
2009-07-08 18:13 ` Subrata Modak
[not found] <200910211528.n9LFST8q028289@e35.co.us.ibm.com>
2009-10-26 17:02 ` Subrata Modak
2009-10-26 19:37 ` Garrett Cooper
2009-10-29 18:12 ` JiříPaleček
2009-10-30 11:37 ` Subrata Modak
2009-10-30 12:53 ` Jiří Paleček
2009-10-30 12:19 ` Subrata Modak
2009-10-31 6:39 ` Garrett Cooper
2009-10-31 11:42 ` Jiří Paleček
2009-11-01 0:15 ` Garrett Cooper
[not found] <4adf2acd.8b13f30a.0849.7847SMTPIN_ADDED@mx.google.com>
2009-10-21 19:38 ` Mike Frysinger
-- strict thread matches above, loose matches on Subject: below --
2009-10-21 0:19 Jiri Palecek
[not found] <4a413e9b.160bca0a.2226.fffff184SMTPIN_ADDED@mx.google.com>
2009-07-06 17:45 ` Garrett Cooper
2009-07-06 22:02 ` Mike Frysinger
2009-07-06 22:47 ` Jiri Palecek
2009-07-06 23:33 ` Garrett Cooper
2009-07-07 0:16 ` Jiří Paleček
2009-07-07 0:31 ` Garrett Cooper
2009-07-07 10:29 ` Jiří Paleček
[not found] <4a413e95.8d13f30a.1199.ffffdccbSMTPIN_ADDED@mx.google.com>
2009-06-23 21:21 ` Mike Frysinger
2009-06-25 9:09 ` Subrata Modak
2009-06-30 7:41 ` Subrata Modak
2009-07-06 23:12 ` Jiri Palecek
2009-05-31 21:27 Jiri Palecek >
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200907071035.46915.jpalecek@web.de \
--to=jpalecek@web.de \
--cc=ltp-list@lists.sf.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox