From: Hannu Heikkinen <hannuxx@iki.fi>
To: ARJIT SHARMA <joyarjit@gmail.com>
Cc: ltp-list@lists.sourceforge.net
Subject: Re: [LTP] LHOST_HWADDR
Date: Wed, 29 Sep 2010 20:42:58 +0300 [thread overview]
Message-ID: <20100929174258.GA4493@hannu-ubuntu> (raw)
In-Reply-To: <AANLkTin18VbZ7bO6++nPd_Fz1J4FHQRn4akkqTDLYeT5@mail.gmail.com>
Hi,
Sorry about top posting, but I just briefly mention that please read
<ltp-source-dir>/testcases/network/stress/README file. U have to setup values
for RHOST etc env vars found in testscripts/networkstress.sh.
br,
Hannu
On 28/09/10 10:09 +0530, ARJIT SHARMA wrote:
> Hi
>
> During the execution of network related tests i am getting the error as
> "environment variable LHOST_HWADDR not set"
> i tried solving this problem even by given static hwaddr in the
> testscript "networkstress.sh" but same error is coming.
> i am runnning LTP on armv7 architechture.
> Here i am also sending you the log file, please help me out to solve
> this problem.
>
>
> INFO: creating /opt/ltp/results directory
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>
> Linux 192.168.1.10 2.6.32 #2 SMP Fri Aug 27 12:31:08 IST 2010 armv7l unknown
> unknown GNU/Linux
>
> Gnu C gcc (GCC) 4.5.0
> Gnu make 3.81
> util-linux ng 2.16.1)
> mount ng 2.16.1 (with libblkid support)
> modutils 3.1
> e2fsprogs 1.41.9
> PPP 2.4.4
> Linux C Library 2.10.1
> Dynamic linker (ldd) 2.10.1
> Linux C++ Library 6.0.14
> Procps 3.2.7
> Net-tools 1.60
> iproute2 iproute2-ss100224
> Console-tools 0.2.3
> Sh-utils 5.2.1
> Modules Loaded
> free reports:
> total used free shared buffers cached
> Mem: 255556 24508 231048 0 0 14620
> -/+ buffers/cache: 9888 245668
> Swap: 0 0 0
> /proc/cpuinfo
> Processor : ARMv7 Processor rev 1 (v7l)
> processor : 0
> BogoMIPS : 996.14
> processor : 1
> BogoMIPS : 996.14
> Features : swp half thumb fastmult vfp edsp vfpv3 vfpv3d16
> CPU implementer : 0x41
> CPU architecture: 7
> CPU variant : 0x1
> CPU part : 0xc09
> CPU revision : 1
> Hardware : ST-SPEAR1300-EVB
> Revision : 0000
> Serial : 0000000000000000
> remove test cases which require the block device.
> You can specify it with option -b
> COMMAND: /opt/ltp/bin/ltp-pan -e -S -a 12621 -n 12621 -p -f
> /tmp/ltp-isNlo12627/alltests -l
> /opt/ltp/results/network_stress.broken_ip.result -C
> /opt/ltp/output/LTP_RUN_ON-network_stress.broken_ip.result.failed
> LOG File: /opt/ltp/results/network_stress.broken_ip.result
> FAILED COMMAND File:
> /opt/ltp/output/LTP_RUN_ON-network_stress.broken_ip.result.failed
> Running tests.......
> <<<test_start>>>
> tag=broken_ip4-version stime=351622598
> cmdline="broken_ip4-version"
> contacts=""
> analysis=exit
> <<<test_output>>>
> broken_ip4-version01 0 TINFO : Verify that the kernel is not crashed
> with receiving a large number of IPv4 packets that have wrong value in
> version field.
> broken_ip4-version01 1 TBROK : Environment variable LHOST_HWADDRS is
> not set.
> <<<execution_status>>>
> initiation_status="ok"
> duration=0 termination_type=exited termination_id=1 corefile=no
> cutime=3 cstime=10
> <<<test_end>>>
> <<<test_start>>>
> tag=broken_ip4-ihl stime=351622598
> cmdline="broken_ip4-ihl"
> contacts=""
> analysis=exit
> <<<test_output>>>
> broken_ip4-ihl01 0 TINFO : Verify that the kernel is not crashed with
> receiving a large number of IPv4 packets that have wrong value in the header
> length field.
> broken_ip4-ihl01 1 TBROK : Environment variable LHOST_HWADDRS is not
> set.
> <<<execution_status>>>
> initiation_status="ok"
> duration=0 termination_type=exited termination_id=1 corefile=no
> cutime=3 cstime=7
> <<<test_end>>>
> <<<test_start>>>
> tag=broken_ip4-totlen stime=351622598
> cmdline="broken_ip4-totlen"
> contacts=""
> analysis=exit
> <<<test_output>>>
> broken_ip4-totlen01 0 TINFO : Verify that the kernel is not crashed
> with receiving a large number of IPv4 packets that have wrong value in the
> total length field.
> broken_ip4-totlen01 1 TBROK : Environment variable LHOST_HWADDRS is
> not set.
> <<<execution_status>>>
> initiation_status="ok"
> duration=0 termination_type=exited termination_id=1 corefile=no
> cutime=7 cstime=5
> <<<test_end>>>
> <<<test_start>>>
> tag=broken_ip4-fragment stime=351622598
> cmdline="broken_ip4-fragment"
> contacts=""
> analysis=exit
> <<<test_output>>>
> broken_ip4-fragment01 0 TINFO : Verify that the kernel is not crashed
> with receiving a large number of IPv4 packets that have wrong fragment
> information
> broken_ip4-fragment01 1 TBROK : Environment variable LHOST_HWADDRS is
> not set.
> <<<execution_status>>>
> initiation_status="ok"
> duration=0 termination_type=exited termination_id=1 corefile=no
> cutime=2 cstime=13
> <<<test_end>>>
> <<<test_start>>>
> tag=broken_ip4-protcol stime=351622598
> cmdline="broken_ip4-protcol"
> contacts=""
> analysis=exit
> <<<test_output>>>
> broken_ip4-protocol01 0 TINFO : Verify that the kernel is not crashed
> with receiving a large number of IPv4 packets that have wrong value in the
> protocol field
> broken_ip4-protocol01 1 TBROK : Environment variable LHOST_HWADDRS is
> not set.
> <<<execution_status>>>
> initiation_status="ok"
> duration=0 termination_type=exited termination_id=1 corefile=no
> cutime=4 cstime=8
> <<<test_end>>>
> <<<test_start>>>
> tag=broken_ip4-checksum stime=351622598
> cmdline="broken_ip4-checksum"
> contacts=""
> analysis=exit
> <<<test_output>>>
> broken_ip4-checksum01 0 TINFO : Verify that the kernel is not crashed
> with receiving a large number of IPv4 packets that have wrong value in the
> checksum field
> broken_ip4-checksum01 1 TBROK : Environment variable LHOST_HWADDRS is
> not set.
> <<<execution_status>>>
> initiation_status="ok"
> duration=0 termination_type=exited termination_id=1 corefile=no
> cutime=5 cstime=7
> <<<test_end>>>
> <<<test_start>>>
> tag=broken_ip4-dstaddr stime=351622598
> cmdline="broken_ip4-dstaddr"
> contacts=""
> analysis=exit
> <<<test_output>>>
> broken_ip4-dstaddr01 0 TINFO : Verify that the kernel is not crashed
> with receiving a large number of IPv4 packets whose destination address is
> wrong (destination MAC address is correct)
> broken_ip4-dstaddr01 1 TBROK : Environment variable LHOST_HWADDRS is
> not set.
> <<<execution_status>>>
> initiation_status="ok"
> duration=1 termination_type=exited termination_id=1 corefile=no
> cutime=3 cstime=9
> <<<test_end>>>
> <<<test_start>>>
> tag=broken_ip6-dstaddr stime=351622599
> cmdline="broken_ip6-dstaddr"
> contacts=""
> analysis=exit
> <<<test_output>>>
> broken_ip6-dstaddr01 0 TINFO : Verify that the kernel is not crashed
> with receiving a large number of IPv6 packets whose destination address is
> wrong (destination MAC address is correct)
> broken_ip6-dstaddr01 1 TBROK : Environment variable LHOST_HWADDRS is
> not set.
> <<<execution_status>>>
> initiation_status="ok"
> duration=0 termination_type=exited termination_id=1 corefile=no
> cutime=1 cstime=12
> <<<test_end>>>
> <<<test_start>>>
> tag=broken_ip6-nexthdr stime=351622599
> cmdline="broken_ip6-nexthdr"
> contacts=""
> analysis=exit
> <<<test_output>>>
> broken_ip6-nexthdr01 0 TINFO : Verify that the kernel is not crashed
> with receiving a large number of IPv6 packets that have wrong value in the
> next header field.
> broken_ip6-nexthdr01 1 TBROK : Environment variable LHOST_HWADDRS is
> not set.
> <<<execution_status>>>
> initiation_status="ok"
> duration=0 termination_type=exited termination_id=1 corefile=no
> cutime=7 cstime=7
> <<<test_end>>>
> <<<test_start>>>
> tag=broken_ip6-plen stime=351622599
> cmdline="broken_ip6-plen"
> contacts=""
> analysis=exit
> <<<test_output>>>
> broken_ip6-plen01 0 TINFO : Verify that the kernel is not crashed with
> receiving a large number of IPv6 packets that have wrong value in the
> payload length field.
> broken_ip6-plen01 1 TBROK : Environment variable LHOST_HWADDRS is not
> set.
> <<<execution_status>>>
> initiation_status="ok"
> duration=0 termination_type=exited termination_id=1 corefile=no
> cutime=2 cstime=9
> <<<test_end>>>
> <<<test_start>>>
> tag=broken_ip6-version stime=351622599
> cmdline="broken_ip6-version"
> contacts=""
> analysis=exit
> <<<test_output>>>
> broken_ip6-version01 0 TINFO : Verify that the kernel is not crashed
> with receiving a large number of IPv6 packets that have wrong value in
> version field.
> broken_ip6-version01 1 TBROK : Environment variable LHOST_HWADDRS is
> not set.
> incrementing stop
> <<<execution_status>>>
> initiation_status="ok"
> duration=0 termination_type=exited termination_id=1 corefile=no
> cutime=3 cstime=7
> <<<test_end>>>
> INFO: ltp-pan reported some tests FAIL
> LTP Version: LTP-20100131
>
> ###############################################################"
>
> Done executing testcases."
> LTP Version: LTP-20100131
> ###############################################################"
>
>
>
>
> --
> Regards,
> Arjit Sharma.
> ------------------------------------------------------------------------------
> Start uncovering the many advantages of virtual appliances
> and start using them to simplify application deployment and
> accelerate your shift to cloud computing.
> http://p.sf.net/sfu/novell-sfdev2dev
> _______________________________________________
> Ltp-list mailing list
> Ltp-list@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/ltp-list
------------------------------------------------------------------------------
Start uncovering the many advantages of virtual appliances
and start using them to simplify application deployment and
accelerate your shift to cloud computing.
http://p.sf.net/sfu/novell-sfdev2dev
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
next prev parent reply other threads:[~2010-09-29 17:43 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-28 4:14 [LTP] LHOST_HWADDR ARJIT SHARMA
2010-09-28 4:39 ` ARJIT SHARMA
2010-09-29 17:42 ` Hannu Heikkinen [this message]
2010-09-30 3:56 ` ARJIT SHARMA
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100929174258.GA4493@hannu-ubuntu \
--to=hannuxx@iki.fi \
--cc=joyarjit@gmail.com \
--cc=ltp-list@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox