From: Li Wang <liwang@redhat.com>
To: ltp@lists.linux.it
Subject: [LTP] [PATCH v3 1/3] ltp/numa: add new test11
Date: Fri, 19 May 2017 16:25:17 +0800 [thread overview]
Message-ID: <20170519082519.9471-1-liwang@redhat.com> (raw)
Signed-off-by: Li Wang <liwang@redhat.com>
---
testcases/kernel/numa/README | 2 ++
testcases/kernel/numa/numa01.sh | 51 ++++++++++++++++++++++++++++++++--
testcases/kernel/numa/support_numa.c | 53 ++++++++++++++++++++++++++++++++++--
3 files changed, 101 insertions(+), 5 deletions(-)
diff --git a/testcases/kernel/numa/README b/testcases/kernel/numa/README
index 57b12f7..a5c3f1b 100644
--- a/testcases/kernel/numa/README
+++ b/testcases/kernel/numa/README
@@ -54,6 +54,8 @@ Verifies the numa_node_size api with hardware checking.
TestCase10:
Verifieds the NUMA migratepages policy.
+TestCase11:
+Verifies the hugepage memory allocated from the node we specify.
Pre-requisites
====================================================================================================================
diff --git a/testcases/kernel/numa/numa01.sh b/testcases/kernel/numa/numa01.sh
index f0f6139..69e5357 100755
--- a/testcases/kernel/numa/numa01.sh
+++ b/testcases/kernel/numa/numa01.sh
@@ -31,11 +31,12 @@
# Test #8: Verifies memhog #
# Test #9: Verifies numa_node_size api #
# Test #10:Verifies Migratepages #
+# Test #11:Verifies hugepage alloacted on specified node #
# #
##############################################################################
TST_ID="numa01"
-TST_CNT=10
+TST_CNT=11
TST_SETUP=setup
TST_TESTFUNC=test
TST_NEEDS_TMPDIR=1
@@ -83,11 +84,13 @@ setup()
{
export MB=$((1024*1024))
export PAGE_SIZE=$(getconf PAGE_SIZE)
+ export HPAGE_SIZE=$(awk '/Hugepagesize:/ {print $2}' /proc/meminfo)
# arguments to memory exercise program support_numa.c
ALLOC_1MB=1
SHARE_1MB=2
- PAUSE=3
+ HUGE_PAGE=3
+ PAUSE=4
total_nodes=0
@@ -399,4 +402,48 @@ test10()
tst_res TPASS "NUMA MIGRATEPAGES policy"
}
+# Verification of hugepage memory allocated on a node
+test11()
+{
+ Mem_huge=0
+ Sys_node=/sys/devices/system/node
+
+ if [ ! -d "/sys/kernel/mm/hugepages/" ]; then
+ tst_res TCONF "hugepage is not supported"
+ return
+ fi
+
+ for node in $nodes_list; do
+ Ori_hpgs=$(cat ${Sys_node}/node${node}/hugepages/hugepages-${HPAGE_SIZE}kB/nr_hugepages)
+ New_hpgs=$((Ori_hpgs + 1))
+ echo $New_hpgs >${Sys_node}/node${node}/hugepages/hugepages-${HPAGE_SIZE}kB/nr_hugepages
+
+ Chk_hpgs=$(cat ${Sys_node}/node${node}/hugepages/hugepages-${HPAGE_SIZE}kB/nr_hugepages)
+ if [ "$Chk_hpgs" -ne "$New_hpgs" ]; then
+ tst_res TCONF "hugepage is not enough to test"
+ return
+ fi
+
+ numactl --cpunodebind=$node --membind=$node support_numa $HUGE_PAGE &
+ pid=$!
+ wait_for_support_numa $pid
+
+ Mem_huge=$(echo $(numastat -p $pid |awk '/Huge/ {print $'$((node+2))'}'))
+ Mem_huge=$((${Mem_huge%.*} * 1024))
+
+ if [ "$Mem_huge" -lt "$HPAGE_SIZE" ]; then
+ tst_res TFAIL \
+ "NUMA memory allocated in node$node is less than expected"
+ kill -CONT $pid >/dev/null 2>&1
+ echo $Ori_hpgs >${Sys_node}/node${node}/hugepages/hugepages-${HPAGE_SIZE}kB/nr_hugepages
+ return
+ fi
+
+ kill -CONT $pid >/dev/null 2>&1
+ echo $Ori_hpgs >${Sys_node}/node${node}/hugepages/hugepages-${HPAGE_SIZE}kB/nr_hugepages
+ done
+
+ tst_res TPASS "NUMA local node hugepage memory allocated"
+}
+
tst_run
diff --git a/testcases/kernel/numa/support_numa.c b/testcases/kernel/numa/support_numa.c
index eaf63e3..97f3008 100644
--- a/testcases/kernel/numa/support_numa.c
+++ b/testcases/kernel/numa/support_numa.c
@@ -22,7 +22,7 @@
/* */
/* File: support_numa.c */
/* */
-/* Description: Allocates 1MB of memory and touches it to verify numa */
+/* Description: Allocates memory and touches it to verify numa */
/* */
/* Author: Sivakumar Chinnaiah Sivakumar.C@in.ibm.com */
/* */
@@ -52,16 +52,43 @@ static void help(void)
printf("Input: Describe input arguments to this program\n");
printf(" argv[1] == 1 then allocate 1MB of memory\n");
printf(" argv[1] == 2 then allocate 1MB of share memory\n");
- printf(" argv[1] == 3 then pause the program to catch sigint\n");
+ printf(" argv[1] == 3 then allocate 1HUGE PAGE SIZE of memory\n");
+ printf(" argv[1] == 4 then pause the program to catch sigint\n");
printf("Exit: On failure - Exits with non-zero value\n");
printf(" On success - exits with 0 exit value\n");
exit(1);
}
+static int read_hugepagesize(void)
+{
+ FILE *fp;
+ char line[BUFSIZ], buf[BUFSIZ];
+ int val;
+
+ fp = fopen("/proc/meminfo", "r");
+ if (fp == NULL) {
+ fprintf(stderr, "Failed to open /proc/meminfo");
+ return 0;
+ }
+
+ while (fgets(line, BUFSIZ, fp) != NULL) {
+ if (sscanf(line, "%64s %d", buf, &val) == 2)
+ if (strcmp(buf, "Hugepagesize:") == 0) {
+ fclose(fp);
+ return 1024 * val;
+ }
+ }
+
+ fclose(fp);
+ fprintf(stderr, "can't find \"%s\" in %s", "Hugepagesize:", "/proc/meminfo");
+
+ return 0;
+}
+
int main(int argc, char *argv[])
{
- int i, fd, rc;
+ int i, fd, rc, hpsz;
char *buf = NULL;
struct stat sb;
@@ -114,6 +141,26 @@ int main(int argc, char *argv[])
remove(TEST_SFILE);
break;
case 3:
+ hpsz = read_hugepagesize();
+ if (hpsz == 0)
+ exit(1);
+
+ buf = mmap(NULL, hpsz, PROT_READ | PROT_WRITE,
+ MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB,
+ -1, 0);
+
+ if (buf == MAP_FAILED) {
+ perror("mmap failed");
+ exit(1);
+ }
+
+ memset(buf, 'a', hpsz);
+
+ raise(SIGSTOP);
+
+ munmap(buf, hpsz);
+ break;
+ case 4:
raise(SIGSTOP);
break;
default:
--
2.9.3
next reply other threads:[~2017-05-19 8:25 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-19 8:25 Li Wang [this message]
2017-05-19 8:25 ` [LTP] [PATCH v3 2/3] ltp/numa: Kill the support_numa if FAILED Li Wang
2017-05-19 8:25 ` [LTP] [PATCH v3 3/3] ltp/numa: use string to describe operation Li Wang
2017-05-19 8:32 ` Li Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170519082519.9471-1-liwang@redhat.com \
--to=liwang@redhat.com \
--cc=ltp@lists.linux.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox