From: Han Pingtian <hanpt@linux.vnet.ibm.com>
To: ltp@lists.linux.it
Subject: [LTP] [PATCH] fallocate04: continues after failure of front test
Date: Fri, 12 Oct 2018 11:00:08 +0800 [thread overview]
Message-ID: <20181012030008.GA26983@hptatwork> (raw)
When run this case, a failure of test02 will prevent test03, test04, ...
to be run. This patch replace tst_brk() with tst_res() and return after
a failure in each sub-cases.
---
testcases/kernel/syscalls/fallocate/fallocate04.c | 74 +++++++++++++++--------
1 file changed, 49 insertions(+), 25 deletions(-)
diff --git a/testcases/kernel/syscalls/fallocate/fallocate04.c b/testcases/kernel/syscalls/fallocate/fallocate04.c
index e576d728d..afb4cd107 100644
--- a/testcases/kernel/syscalls/fallocate/fallocate04.c
+++ b/testcases/kernel/syscalls/fallocate/fallocate04.c
@@ -96,9 +96,12 @@ static void test01(void)
tst_res(TINFO, "allocate '%zu' bytes", buf_size);
if (fallocate(fd, 0, 0, buf_size) == -1) {
- if (errno == ENOSYS || errno == EOPNOTSUPP)
- tst_brk(TCONF, "fallocate() not supported");
- tst_brk(TFAIL | TERRNO, "fallocate() failed");
+ if (errno == ENOSYS || errno == EOPNOTSUPP) {
+ tst_res(TCONF, "fallocate() not supported");
+ return;
+ }
+ tst_res(TFAIL | TERRNO, "fallocate() failed");
+ return;
}
char buf[buf_size];
@@ -118,17 +121,20 @@ static void test02(void)
tst_res(TINFO, "make a hole with FALLOC_FL_PUNCH_HOLE");
if (tst_kvercmp(2, 6, 38) < 0) {
- tst_brk(TCONF,
+ tst_res(TCONF,
"FALLOC_FL_PUNCH_HOLE needs Linux 2.6.38 or newer");
+ return;
}
if (fallocate(fd, FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
block_size, block_size) == -1) {
if (errno == EOPNOTSUPP) {
- tst_brk(TCONF,
+ tst_res(TCONF,
"FALLOC_FL_PUNCH_HOLE not supported");
+ return;
}
- tst_brk(TFAIL | TERRNO, "fallocate() failed");
+ tst_res(TFAIL | TERRNO, "fallocate() failed");
+ return;
}
tst_res(TINFO, "check that file has a hole with lseek(,,SEEK_HOLE)");
@@ -137,14 +143,15 @@ static void test02(void)
if (ret != (ssize_t)block_size) {
/* exclude error when kernel doesn't have SEEK_HOLE support */
if (errno != EINVAL) {
- tst_brk(TFAIL | TERRNO,
+ tst_res(TFAIL | TERRNO,
"fallocate() or lseek() failed");
+ return;
}
if (tst_kvercmp(3, 1, 0) < 0) {
tst_res(TINFO, "lseek() doesn't support SEEK_HOLE, "
"this is expected for < 3.1 kernels");
} else {
- tst_brk(TBROK | TERRNO,
+ tst_res(TBROK | TERRNO,
"lseek() doesn't support SEEK_HOLE");
}
} else {
@@ -155,8 +162,10 @@ static void test02(void)
tst_res(TINFO, "allocated file size before '%zu' and after '%zu'",
alloc_size0, alloc_size1);
- if ((alloc_size0 - block_size) != alloc_size1)
- tst_brk(TFAIL, "not expected allocated size");
+ if ((alloc_size0 - block_size) != alloc_size1) {
+ tst_res(TFAIL, "not expected allocated size");
+ return;
+ }
char exp_buf[buf_size];
@@ -173,8 +182,9 @@ static void test03(void)
tst_res(TINFO, "zeroing file space with FALLOC_FL_ZERO_RANGE");
if (tst_kvercmp(3, 15, 0) < 0) {
- tst_brk(TCONF,
+ tst_res(TCONF,
"FALLOC_FL_ZERO_RANGE needs Linux 3.15 or newer");
+ return;
}
size_t alloc_size0 = get_allocsize();
@@ -184,10 +194,12 @@ static void test03(void)
if (fallocate(fd, FALLOC_FL_ZERO_RANGE, block_size - 1,
block_size + 2) == -1) {
if (errno == EOPNOTSUPP) {
- tst_brk(TCONF,
+ tst_res(TCONF,
"FALLOC_FL_ZERO_RANGE not supported");
+ return;
}
- tst_brk(TFAIL | TERRNO, "fallocate failed");
+ tst_res(TFAIL | TERRNO, "fallocate failed");
+ return;
}
/* The file hole in the specified range must be allocated and
@@ -197,8 +209,10 @@ static void test03(void)
tst_res(TINFO, "allocated file size before '%zu' and after '%zu'",
alloc_size0, alloc_size1);
- if ((alloc_size0 + block_size) != alloc_size1)
- tst_brk(TFAIL, "not expected allocated size");
+ if ((alloc_size0 + block_size) != alloc_size1) {
+ tst_res(TFAIL, "not expected allocated size");
+ return;
+ }
char exp_buf[buf_size];
@@ -221,18 +235,22 @@ static void test04(void)
if (fallocate(fd, FALLOC_FL_COLLAPSE_RANGE, block_size,
block_size) == -1) {
if (errno == EOPNOTSUPP) {
- tst_brk(TCONF,
+ tst_res(TCONF,
"FALLOC_FL_COLLAPSE_RANGE not supported");
+ return;
}
- tst_brk(TFAIL | TERRNO, "fallocate failed");
+ tst_res(TFAIL | TERRNO, "fallocate failed");
+ return;
}
size_t alloc_size1 = get_allocsize();
tst_res(TINFO, "allocated file size before '%zu' and after '%zu'",
alloc_size0, alloc_size1);
- if ((alloc_size0 - block_size) != alloc_size1)
- tst_brk(TFAIL, "not expected allocated size");
+ if ((alloc_size0 - block_size) != alloc_size1) {
+ tst_res(TFAIL, "not expected allocated size");
+ return;
+ }
size_t size = buf_size - block_size;
char tmp_buf[buf_size];
@@ -261,22 +279,28 @@ static void test05(void)
if (fallocate(fd, FALLOC_FL_INSERT_RANGE, block_size,
block_size) == -1) {
if (errno == EOPNOTSUPP) {
- tst_brk(TCONF,
+ tst_res(TCONF,
"FALLOC_FL_INSERT_RANGE not supported");
+ return;
}
- tst_brk(TFAIL | TERRNO, "fallocate failed");
+ tst_res(TFAIL | TERRNO, "fallocate failed");
+ return;
}
/* allocate space and ensure that it filled with zeroes */
- if (fallocate(fd, FALLOC_FL_ZERO_RANGE, block_size, block_size) == -1)
- tst_brk(TFAIL | TERRNO, "fallocate failed");
+ if (fallocate(fd, FALLOC_FL_ZERO_RANGE, block_size, block_size) == -1) {
+ tst_res(TFAIL | TERRNO, "fallocate failed");
+ return;
+ }
size_t alloc_size1 = get_allocsize();
tst_res(TINFO, "allocated file size before '%zu' and after '%zu'",
alloc_size0, alloc_size1);
- if ((alloc_size0 + block_size) != alloc_size1)
- tst_brk(TFAIL, "not expected allocated size");
+ if ((alloc_size0 + block_size) != alloc_size1) {
+ tst_res(TFAIL, "not expected allocated size");
+ return;
+ }
char exp_buf[buf_size];
--
2.14.4
next reply other threads:[~2018-10-12 3:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-12 3:00 Han Pingtian [this message]
2018-10-12 15:24 ` [LTP] [PATCH] fallocate04: continues after failure of front test Cyril Hrubis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181012030008.GA26983@hptatwork \
--to=hanpt@linux.vnet.ibm.com \
--cc=ltp@lists.linux.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox