From: Matthew Bobrowski <mbobrowski@mbobrowski.org>
To: ltp@lists.linux.it
Subject: [LTP] [RFC 2/3] syscalls/fanotify03: included execve() to generate_events() to increase test coverage
Date: Thu, 25 Oct 2018 17:39:49 +1100 [thread overview]
Message-ID: <20181025063924.GA7235@development.internal.lab> (raw)
In-Reply-To: <CAOQ4uxgmOPQz7ZCobHvWKhpyCmAjNn9_sBsuxc+cv-YvhWG9DQ@mail.gmail.com>
On Wed, Oct 24, 2018 at 08:31:22AM +0300, Amir Goldstein wrote:
> On Wed, Oct 24, 2018 at 6:28 AM Matthew Bobrowski
> <mbobrowski@mbobrowski.org> wrote:
> >
> > * Created an executable helper program 'fanotify_child' so that can be
> > used within fanotify tests
> >
> > * Defined .resource_files so that additional test resources can be
> > copied across to the tmp working directory i.e. fanotify_child
> >
> > * Updated generate_events() so that it now includes a call to execve()
> > on fanotify_child. This is so that we can increase the overall test
> > coverage by generating more events on a watched object
> >
> > * Updated each tcase events[] to accommodate for the additional events
> > generated by execve()
> >
> > Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org>
> > ---
> > testcases/kernel/syscalls/fanotify/.gitignore | 1 +
> > .../kernel/syscalls/fanotify/fanotify03.c | 83 ++++++++++++-------
> > .../kernel/syscalls/fanotify/fanotify_child.c | 14 ++++
> > 3 files changed, 66 insertions(+), 32 deletions(-)
> > create mode 100644 testcases/kernel/syscalls/fanotify/fanotify_child.c
> >
> > diff --git a/testcases/kernel/syscalls/fanotify/.gitignore b/testcases/kernel/syscalls/fanotify/.gitignore
> > index c26f2bd27..af420b8b3 100644
> > --- a/testcases/kernel/syscalls/fanotify/.gitignore
> > +++ b/testcases/kernel/syscalls/fanotify/.gitignore
> > @@ -8,3 +8,4 @@
> > /fanotify08
> > /fanotify09
> > /fanotify10
> > +/fanotify_child
> > diff --git a/testcases/kernel/syscalls/fanotify/fanotify03.c b/testcases/kernel/syscalls/fanotify/fanotify03.c
> > index cca15aa00..f9418ee6b 100644
> > --- a/testcases/kernel/syscalls/fanotify/fanotify03.c
> > +++ b/testcases/kernel/syscalls/fanotify/fanotify03.c
> > @@ -35,6 +35,7 @@
> >
> > #define BUF_SIZE 256
> > #define TST_TOTAL 3
> > +#define TEST_APP "fanotify_child"
> >
> > static char fname[BUF_SIZE];
> > static char buf[BUF_SIZE];
> > @@ -60,28 +61,31 @@ static struct tcase {
> > {
> > "inode mark permission events",
> > INIT_FANOTIFY_MARK_TYPE(INODE),
> > - FAN_OPEN_PERM | FAN_ACCESS_PERM, 2,
> > + FAN_OPEN_PERM | FAN_ACCESS_PERM, 3,
> > {
> > {FAN_OPEN_PERM, FAN_ALLOW},
> > - {FAN_ACCESS_PERM, FAN_DENY}
> > + {FAN_ACCESS_PERM, FAN_DENY},
> > + {FAN_OPEN_PERM, FAN_DENY}
> > }
> > },
> > {
> > "mount mark permission events",
> > INIT_FANOTIFY_MARK_TYPE(MOUNT),
> > - FAN_OPEN_PERM | FAN_ACCESS_PERM, 2,
> > + FAN_OPEN_PERM | FAN_ACCESS_PERM, 3,
> > {
> > {FAN_OPEN_PERM, FAN_ALLOW},
> > - {FAN_ACCESS_PERM, FAN_DENY}
> > + {FAN_ACCESS_PERM, FAN_DENY},
> > + {FAN_OPEN_PERM, FAN_DENY}
> > }
> > },
> > {
> > "filesystem mark permission events",
> > INIT_FANOTIFY_MARK_TYPE(FILESYSTEM),
> > - FAN_OPEN_PERM | FAN_ACCESS_PERM, 2,
> > + FAN_OPEN_PERM | FAN_ACCESS_PERM, 3,
> > {
> > {FAN_OPEN_PERM, FAN_ALLOW},
> > - {FAN_ACCESS_PERM, FAN_DENY}
> > + {FAN_ACCESS_PERM, FAN_DENY},
> > + {FAN_OPEN_PERM, FAN_DENY}
> > }
> > }
> > };
> > @@ -89,9 +93,10 @@ static struct tcase {
> > static void generate_events(void)
> > {
> > int fd;
> > + char *const argv[] = {TEST_APP, NULL};
> >
> > /*
> > - * generate sequence of events
> > + * Generate sequence of events
> > */
> > if ((fd = open(fname, O_RDWR | O_CREAT, 0700)) == -1)
> > exit(1);
> > @@ -104,6 +109,9 @@ static void generate_events(void)
> >
> > if (close(fd) == -1)
> > exit(4);
> > +
> > + if (execve(TEST_APP, argv, environ) != -1)
> > + exit(5);
> > }
> >
>
> I am a bit puzzled.
> Did you test this point in the series?
>
Yes, I did test it at this point.
> If child is denied read access then it exits before execve(), so you
> shouldn't be adding an extra OPEN event in event_set of exiting
> test cases, which DENY ACCESS??
>
I don't know whether I'm understanding you correctly, but I do believe
that it's needed based on the following facts. Within generate_events()
the system logic flow is as follows:
open(...) == -1
write(...) == -1
read(...) != -1
close(...) == -1
execve(...) == -1
Based on the sequence of system calls and comparison operators above, then
if read access is denied (FAN_DENY) then it does not exit, as that is what
is expected, so it falls through to the next set system calls. Based on
that fact, an additional event {FAN_OPEN_PERM, FAN_DENY} is needed as this
is the first event that is generated when the mask FAN_OPEN_EXEC_PERM
hasn't been provided as a mask.
--
Matthew Bobrowski <mbobrowski@mbobrowski.org>
next prev parent reply other threads:[~2018-10-25 6:39 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-24 3:26 [LTP] [RFC 0/3] syscalls/fanotify03: add support and tests for new FAN_OPEN_EXEC_PERM flag Matthew Bobrowski
2018-10-24 3:27 ` [LTP] [RFC 1/3] syscalls/fanotify03: defined additional tcase members to support more tcase control Matthew Bobrowski
2018-10-24 5:23 ` Amir Goldstein
2018-10-25 6:19 ` Matthew Bobrowski
2018-10-24 3:27 ` [LTP] [RFC 2/3] syscalls/fanotify03: included execve() to generate_events() to increase test coverage Matthew Bobrowski
2018-10-24 5:31 ` Amir Goldstein
2018-10-25 6:39 ` Matthew Bobrowski [this message]
2018-10-25 6:46 ` Amir Goldstein
2018-10-24 3:28 ` [LTP] [RFC 3/3] syscalls/fanotify03: add FAN_OPEN_EXEC_PERM tcase support Matthew Bobrowski
2018-10-24 5:56 ` Amir Goldstein
2018-10-25 6:39 ` Matthew Bobrowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181025063924.GA7235@development.internal.lab \
--to=mbobrowski@mbobrowski.org \
--cc=ltp@lists.linux.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox