From: Petr Vorel <pvorel@suse.cz>
To: ltp@lists.linux.it
Subject: [LTP] [PATCH v6 2/3] syscalls/copy_file_range01: add cross-device test
Date: Tue, 30 Jul 2019 15:35:30 +0200 [thread overview]
Message-ID: <20190730133530.GA32652@dell5510> (raw)
In-Reply-To: <5D400066.2090204@cn.fujitsu.com>
Hi,
> > > Whole patchset LGTM, but here we got quite a lot of failures after increasing
> > > test coverage with .all_filesystems = 1 (which use should be noted in commit
> > > message):
> > > copy_file_range02.c:120: FAIL: copy_file_range failed unexpectedly; expected EOVERFLOW, but got: EINVAL
> > > copy_file_range02.c:126: FAIL: copy_file_range returned wrong value: 16
> > > ...
> > > copy_file_range02.c:126: FAIL: copy_file_range returned wrong value: 16
> Hi Petr
> can you give more information? such as distros, filesystem, envrionment, do you get 16(EBUSY) on all filesystems?
> Because on my machine, I get the following result on 4.18.0-80.el8.x86_64(I test on vfat, extN,xfs,btrfs).
Failing on various distros (VM: openSUSE Tumbleweed, Debian stable and testing,
Centos 7; also on real HW openSUSE), fs: ext4, xfs, btrfs, vfat.
I wonder, what I do wrong. I posted whole output of one machine below.
> > Also .mount_device = 1 and .all_filesystems = 1 require
> > .needs_root = 1 definition or you get
> > tst_device.c:97: INFO: Not allowed to open /dev/loop-control. Are you root?: EACCES
> > tst_device.c:132: INFO: No free devices found
> > tst_device.c:308: BROK: Failed to acquire device
> > BTW I wonder whether these could be detected automatically.
> Here needs root because /dev/loop-control needs it. But it doesn't represent mount_device and all_filesystems
> need root.
> Or, I misunderstand your idea?
I thought that for some cases it'd be nice, if .needs_root = 1 was added
internally. But probably bad idea, I guess we should be explicit and add it.
Kind regards,
Petr
tst_device.c:86: INFO: Found free device 1 '/dev/loop1'
tst_supported_fs_types.c:60: INFO: Kernel supports ext2
tst_supported_fs_types.c:44: INFO: mkfs.ext2 does exist
tst_supported_fs_types.c:60: INFO: Kernel supports ext3
tst_supported_fs_types.c:44: INFO: mkfs.ext3 does exist
tst_supported_fs_types.c:60: INFO: Kernel supports ext4
tst_supported_fs_types.c:44: INFO: mkfs.ext4 does exist
tst_supported_fs_types.c:60: INFO: Kernel supports xfs
tst_supported_fs_types.c:44: INFO: mkfs.xfs does exist
tst_supported_fs_types.c:60: INFO: Kernel supports btrfs
tst_supported_fs_types.c:44: INFO: mkfs.btrfs does exist
tst_supported_fs_types.c:60: INFO: Kernel supports vfat
tst_supported_fs_types.c:44: INFO: mkfs.vfat does exist
tst_supported_fs_types.c:83: INFO: Filesystem exfat is not supported
tst_supported_fs_types.c:83: INFO: Filesystem ntfs is not supported
tst_test.c:1161: INFO: Testing on ext2
tst_mkfs.c:90: INFO: Formatting /dev/loop1 with ext2 opts='' extra opts=''
mke2fs 1.45.0 (6-Mar-2019)
tst_test.c:1100: INFO: Timeout per run is 0h 05m 00s
copy_file_range.h:41: INFO: Testing libc copy_file_range()
tst_device.c:86: INFO: Found free device 2 '/dev/loop2'
Setting up swapspace version 1, size = 36 KiB (36864 bytes)
no label, UUID=e585e0bd-0e55-4cdc-a37f-ca81411021c3
swapon: /tmp/wTdW10/file_swap: swapon failed: Invalid argument
copy_file_range02.c:89: CONF: swapon binary not installed
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EISDIR
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 32
copy_file_range02.c:105: CONF: filesystem doesn't support swapfile, skip it
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:122: FAIL: copy_file_range failed unexpectedly; expected EOVERFLOW, but got: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
swapoff: file_swap: swapoff failed: Invalid argument
copy_file_range02.c:89: CONF: swapoff binary not installed
tst_test.c:1161: INFO: Testing on ext3
tst_mkfs.c:90: INFO: Formatting /dev/loop1 with ext3 opts='' extra opts=''
mke2fs 1.45.0 (6-Mar-2019)
tst_test.c:1100: INFO: Timeout per run is 0h 05m 00s
copy_file_range.h:41: INFO: Testing libc copy_file_range()
tst_device.c:86: INFO: Found free device 2 '/dev/loop2'
Setting up swapspace version 1, size = 36 KiB (36864 bytes)
no label, UUID=188ffc43-d712-452d-ba6c-5727457d87d9
swapon: /tmp/wTdW10/file_swap: swapon failed: Invalid argument
copy_file_range02.c:89: CONF: swapon binary not installed
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EISDIR
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 32
copy_file_range02.c:105: CONF: filesystem doesn't support swapfile, skip it
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:122: FAIL: copy_file_range failed unexpectedly; expected EOVERFLOW, but got: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
swapoff: file_swap: swapoff failed: Invalid argument
copy_file_range02.c:89: CONF: swapoff binary not installed
tst_test.c:1161: INFO: Testing on ext4
tst_mkfs.c:90: INFO: Formatting /dev/loop1 with ext4 opts='' extra opts=''
mke2fs 1.45.0 (6-Mar-2019)
tst_test.c:1100: INFO: Timeout per run is 0h 05m 00s
copy_file_range.h:41: INFO: Testing libc copy_file_range()
tst_device.c:86: INFO: Found free device 2 '/dev/loop2'
Setting up swapspace version 1, size = 36 KiB (36864 bytes)
no label, UUID=3f384ded-2f54-40a5-b43b-826865b3f67e
swapon: /tmp/wTdW10/file_swap: swapon failed: Invalid argument
copy_file_range02.c:89: CONF: swapon binary not installed
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EISDIR
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 32
copy_file_range02.c:105: CONF: filesystem doesn't support swapfile, skip it
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:122: FAIL: copy_file_range failed unexpectedly; expected EOVERFLOW, but got: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
swapoff: file_swap: swapoff failed: Invalid argument
copy_file_range02.c:89: CONF: swapoff binary not installed
tst_test.c:1161: INFO: Testing on xfs
tst_mkfs.c:90: INFO: Formatting /dev/loop1 with xfs opts='' extra opts=''
tst_test.c:1100: INFO: Timeout per run is 0h 05m 00s
copy_file_range.h:41: INFO: Testing libc copy_file_range()
tst_device.c:86: INFO: Found free device 2 '/dev/loop2'
Setting up swapspace version 1, size = 36 KiB (36864 bytes)
no label, UUID=3f088e9f-b153-40f8-813b-661bc5fac6f2
swapon: /tmp/wTdW10/file_swap: swapon failed: Invalid argument
copy_file_range02.c:89: CONF: swapon binary not installed
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EISDIR
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 32
copy_file_range02.c:105: CONF: filesystem doesn't support swapfile, skip it
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:122: FAIL: copy_file_range failed unexpectedly; expected EOVERFLOW, but got: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
swapoff: file_swap: swapoff failed: Invalid argument
copy_file_range02.c:89: CONF: swapoff binary not installed
tst_test.c:1161: INFO: Testing on btrfs
tst_mkfs.c:90: INFO: Formatting /dev/loop1 with btrfs opts='' extra opts=''
tst_test.c:1100: INFO: Timeout per run is 0h 05m 00s
copy_file_range.h:41: INFO: Testing libc copy_file_range()
tst_device.c:86: INFO: Found free device 2 '/dev/loop2'
Setting up swapspace version 1, size = 36 KiB (36864 bytes)
no label, UUID=807360ba-a49a-4f8b-b088-92dd455858a7
swapon: /tmp/wTdW10/file_swap: swapon failed: Invalid argument
copy_file_range02.c:89: CONF: swapon binary not installed
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EISDIR
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 32
copy_file_range02.c:105: CONF: filesystem doesn't support swapfile, skip it
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:122: FAIL: copy_file_range failed unexpectedly; expected EOVERFLOW, but got: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
swapoff: file_swap: swapoff failed: Invalid argument
copy_file_range02.c:89: CONF: swapoff binary not installed
tst_test.c:1161: INFO: Testing on vfat
tst_mkfs.c:90: INFO: Formatting /dev/loop1 with vfat opts='' extra opts=''
tst_test.c:1100: INFO: Timeout per run is 0h 05m 00s
copy_file_range.h:41: INFO: Testing libc copy_file_range()
tst_device.c:86: INFO: Found free device 2 '/dev/loop2'
Setting up swapspace version 1, size = 36 KiB (36864 bytes)
no label, UUID=b805d82d-c5a2-45d1-9ad3-df7921a36ece
swapon: /tmp/wTdW10/file_swap: swapon failed: Invalid argument
copy_file_range02.c:89: CONF: swapon binary not installed
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EISDIR
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 32
copy_file_range02.c:105: CONF: filesystem doesn't support swapfile, skip it
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:122: FAIL: copy_file_range failed unexpectedly; expected EOVERFLOW, but got: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
swapoff: file_swap: swapoff failed: Invalid argument
copy_file_range02.c:89: CONF: swapoff binary not installed
tst_supported_fs_types.c:60: INFO: Kernel supports ext2
tst_supported_fs_types.c:44: INFO: mkfs.ext2 does exist
tst_supported_fs_types.c:60: INFO: Kernel supports ext3
tst_supported_fs_types.c:44: INFO: mkfs.ext3 does exist
tst_supported_fs_types.c:60: INFO: Kernel supports ext4
tst_supported_fs_types.c:44: INFO: mkfs.ext4 does exist
tst_supported_fs_types.c:60: INFO: Kernel supports xfs
tst_supported_fs_types.c:44: INFO: mkfs.xfs does exist
tst_supported_fs_types.c:60: INFO: Kernel supports btrfs
tst_supported_fs_types.c:44: INFO: mkfs.btrfs does exist
tst_supported_fs_types.c:60: INFO: Kernel supports vfat
tst_supported_fs_types.c:44: INFO: mkfs.vfat does exist
tst_supported_fs_types.c:83: INFO: Filesystem exfat is not supported
tst_supported_fs_types.c:83: INFO: Filesystem ntfs is not supported
tst_test.c:1161: INFO: Testing on ext2
tst_mkfs.c:90: INFO: Formatting /dev/loop1 with ext2 opts='' extra opts=''
mke2fs 1.45.0 (6-Mar-2019)
tst_test.c:1100: INFO: Timeout per run is 0h 05m 00s
copy_file_range.h:44: INFO: Testing tst copy_file_range()
tst_device.c:86: INFO: Found free device 2 '/dev/loop2'
Setting up swapspace version 1, size = 36 KiB (36864 bytes)
no label, UUID=e95e50e5-abe4-4f74-924f-af25b1a218a8
swapon: /tmp/wTdW10/file_swap: swapon failed: Invalid argument
copy_file_range02.c:89: CONF: swapon binary not installed
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EISDIR
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 32
copy_file_range02.c:105: CONF: filesystem doesn't support swapfile, skip it
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:122: FAIL: copy_file_range failed unexpectedly; expected EOVERFLOW, but got: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
swapoff: file_swap: swapoff failed: Invalid argument
copy_file_range02.c:89: CONF: swapoff binary not installed
tst_test.c:1161: INFO: Testing on ext3
tst_mkfs.c:90: INFO: Formatting /dev/loop1 with ext3 opts='' extra opts=''
mke2fs 1.45.0 (6-Mar-2019)
tst_test.c:1100: INFO: Timeout per run is 0h 05m 00s
copy_file_range.h:44: INFO: Testing tst copy_file_range()
tst_device.c:86: INFO: Found free device 2 '/dev/loop2'
Setting up swapspace version 1, size = 36 KiB (36864 bytes)
no label, UUID=9bb43d35-e633-4bcb-9110-28d212c06f53
swapon: /tmp/wTdW10/file_swap: swapon failed: Invalid argument
copy_file_range02.c:89: CONF: swapon binary not installed
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EISDIR
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 32
copy_file_range02.c:105: CONF: filesystem doesn't support swapfile, skip it
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:122: FAIL: copy_file_range failed unexpectedly; expected EOVERFLOW, but got: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
swapoff: file_swap: swapoff failed: Invalid argument
copy_file_range02.c:89: CONF: swapoff binary not installed
tst_test.c:1161: INFO: Testing on ext4
tst_mkfs.c:90: INFO: Formatting /dev/loop1 with ext4 opts='' extra opts=''
mke2fs 1.45.0 (6-Mar-2019)
tst_test.c:1100: INFO: Timeout per run is 0h 05m 00s
copy_file_range.h:44: INFO: Testing tst copy_file_range()
tst_device.c:86: INFO: Found free device 2 '/dev/loop2'
Setting up swapspace version 1, size = 36 KiB (36864 bytes)
no label, UUID=52c81016-b46d-41b2-9ee9-4a414c108480
swapon: /tmp/wTdW10/file_swap: swapon failed: Invalid argument
copy_file_range02.c:89: CONF: swapon binary not installed
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EISDIR
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 32
copy_file_range02.c:105: CONF: filesystem doesn't support swapfile, skip it
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:122: FAIL: copy_file_range failed unexpectedly; expected EOVERFLOW, but got: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
swapoff: file_swap: swapoff failed: Invalid argument
copy_file_range02.c:89: CONF: swapoff binary not installed
tst_test.c:1161: INFO: Testing on xfs
tst_mkfs.c:90: INFO: Formatting /dev/loop1 with xfs opts='' extra opts=''
tst_test.c:1100: INFO: Timeout per run is 0h 05m 00s
copy_file_range.h:44: INFO: Testing tst copy_file_range()
tst_device.c:86: INFO: Found free device 2 '/dev/loop2'
Setting up swapspace version 1, size = 36 KiB (36864 bytes)
no label, UUID=f8ecfc5d-1cba-4722-a75e-53a7ff49dd96
swapon: /tmp/wTdW10/file_swap: swapon failed: Invalid argument
copy_file_range02.c:89: CONF: swapon binary not installed
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EISDIR
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 32
copy_file_range02.c:105: CONF: filesystem doesn't support swapfile, skip it
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:122: FAIL: copy_file_range failed unexpectedly; expected EOVERFLOW, but got: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
swapoff: file_swap: swapoff failed: Invalid argument
copy_file_range02.c:89: CONF: swapoff binary not installed
tst_test.c:1161: INFO: Testing on btrfs
tst_mkfs.c:90: INFO: Formatting /dev/loop1 with btrfs opts='' extra opts=''
tst_test.c:1100: INFO: Timeout per run is 0h 05m 00s
copy_file_range.h:44: INFO: Testing tst copy_file_range()
tst_device.c:86: INFO: Found free device 2 '/dev/loop2'
Setting up swapspace version 1, size = 36 KiB (36864 bytes)
no label, UUID=64581f50-f38d-4ae3-8931-b63f312f26dd
swapon: /tmp/wTdW10/file_swap: swapon failed: Invalid argument
copy_file_range02.c:89: CONF: swapon binary not installed
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EISDIR
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 32
copy_file_range02.c:105: CONF: filesystem doesn't support swapfile, skip it
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:122: FAIL: copy_file_range failed unexpectedly; expected EOVERFLOW, but got: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
swapoff: file_swap: swapoff failed: Invalid argument
copy_file_range02.c:89: CONF: swapoff binary not installed
tst_test.c:1161: INFO: Testing on vfat
tst_mkfs.c:90: INFO: Formatting /dev/loop1 with vfat opts='' extra opts=''
tst_test.c:1100: INFO: Timeout per run is 0h 05m 00s
copy_file_range.h:44: INFO: Testing tst copy_file_range()
tst_device.c:86: INFO: Found free device 2 '/dev/loop2'
Setting up swapspace version 1, size = 36 KiB (36864 bytes)
no label, UUID=c008d9a3-6100-41ee-b430-8e566b7785d4
swapon: /tmp/wTdW10/file_swap: swapon failed: Invalid argument
copy_file_range02.c:89: CONF: swapon binary not installed
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EISDIR
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EBADF
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 32
copy_file_range02.c:105: CONF: filesystem doesn't support swapfile, skip it
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:118: PASS: copy_file_range failed as expected: EINVAL
copy_file_range02.c:122: FAIL: copy_file_range failed unexpectedly; expected EOVERFLOW, but got: EINVAL
copy_file_range02.c:127: FAIL: copy_file_range returned wrong value: 0
swapoff: file_swap: swapoff failed: Invalid argument
copy_file_range02.c:89: CONF: swapoff binary not installed
Summary:
passed 96
failed 48
skipped 36
warnings 0
next prev parent reply other threads:[~2019-07-30 13:35 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-03 3:41 [LTP] [PATCH] syscalls/copy_file_range02: increase coverage and remove EXDEV test Yang Xu
2019-07-05 15:22 ` Amir Goldstein
2019-07-05 20:42 ` [LTP] [PATCH v2] " Yang Xu
2019-07-08 15:17 ` Amir Goldstein
2019-07-09 6:57 ` Yang Xu
2019-07-09 10:06 ` Amir Goldstein
2019-07-10 7:18 ` [LTP] [PATCH v3 1/3] lib: alter find_free_loopdev() Yang Xu
2019-07-10 7:18 ` [LTP] [PATCH v3 2/3] syscalls/copy_file_range01: add cross-device test Yang Xu
2019-07-10 7:50 ` Amir Goldstein
2019-07-10 8:22 ` Yang Xu
2019-07-10 7:18 ` [LTP] [PATCH v3 3/3] syscalls/copy_file_range02: increase coverage and remove EXDEV test Yang Xu
2019-07-10 7:57 ` Amir Goldstein
2019-07-10 9:31 ` Yang Xu
2019-07-10 10:53 ` [LTP] [PATCH v4 1/3] lib: alter find_free_loopdev() Yang Xu
2019-07-10 10:53 ` [LTP] [PATCH v4 2/3] syscalls/copy_file_range01: add cross-device test Yang Xu
2019-07-10 15:56 ` Xiao Yang
2019-07-11 6:18 ` Yang Xu
2019-07-10 10:53 ` [LTP] [PATCH v4 3/3] syscalls/copy_file_range02: increase coverage and remove EXDEV test Yang Xu
2019-07-10 13:57 ` [LTP] [PATCH v4 1/3] lib: alter find_free_loopdev() Cyril Hrubis
2019-07-11 4:00 ` Yang Xu
2019-07-11 12:51 ` Cyril Hrubis
2019-07-12 5:25 ` Yang Xu
2019-07-17 5:29 ` Yang Xu
2019-07-17 6:10 ` Amir Goldstein
2019-07-17 9:44 ` [LTP] [PATCH v5 " Yang Xu
2019-07-17 9:44 ` [LTP] [PATCH v5 2/3] syscalls/copy_file_range01: add cross-device test Yang Xu
2019-07-29 13:56 ` Petr Vorel
2019-07-29 13:59 ` Petr Vorel
2019-07-17 9:44 ` [LTP] [PATCH v5 3/3] syscalls/copy_file_range02: increase coverage and remove EXDEV test Yang Xu
2019-07-17 10:14 ` [LTP] [PATCH v5 1/3] lib: alter find_free_loopdev() Amir Goldstein
2019-07-17 10:34 ` Yang Xu
2019-07-17 10:54 ` Cyril Hrubis
2019-07-18 7:30 ` Yang Xu
2019-07-25 5:01 ` [LTP] [PATCH v6 " Yang Xu
2019-07-25 5:01 ` [LTP] [PATCH v6 2/3] syscalls/copy_file_range01: add cross-device test Yang Xu
2019-07-29 14:00 ` Petr Vorel
2019-07-29 14:10 ` Petr Vorel
2019-07-30 8:31 ` Yang Xu
2019-07-30 13:35 ` Petr Vorel [this message]
2019-07-31 7:01 ` Yang Xu
2019-07-31 7:47 ` Petr Vorel
2019-07-25 5:01 ` [LTP] [PATCH v6 3/3] syscalls/copy_file_range02: increase coverage and remove EXDEV test Yang Xu
2019-07-25 5:24 ` Amir Goldstein
2019-07-25 5:44 ` Yang Xu
2019-07-25 8:08 ` Amir Goldstein
2019-07-25 10:13 ` Yang Xu
2019-07-25 11:02 ` Amir Goldstein
2019-07-30 13:26 ` Petr Vorel
2019-07-31 7:09 ` Yang Xu
2019-07-29 13:01 ` [LTP] [PATCH v6 1/3] lib: alter find_free_loopdev() Cyril Hrubis
2019-07-30 10:42 ` Yang Xu
2019-07-30 11:05 ` Cyril Hrubis
2019-07-31 10:40 ` [LTP] [PATCH v7 " Yang Xu
2019-07-31 10:40 ` [LTP] [PATCH v7 2/3] syscalls/copy_file_range01: add cross-device test Yang Xu
2019-07-31 12:28 ` Petr Vorel
2019-07-31 10:40 ` [LTP] [PATCH v7 3/3] syscalls/copy_file_range02: increase coverage and remove EXDEV test Yang Xu
2019-07-31 12:28 ` Petr Vorel
2019-08-05 6:58 ` Murphy Zhou
2019-08-05 7:11 ` Yang Xu
2019-08-05 10:22 ` Murphy Zhou
2019-08-05 11:01 ` Yang Xu
2019-08-06 6:37 ` Yang Xu
2019-08-06 9:29 ` Murphy Zhou
2019-08-06 16:27 ` Petr Vorel
2019-08-07 10:17 ` Murphy Zhou
2019-08-07 12:12 ` Dave Chinner
2019-08-08 3:46 ` Murphy Zhou
2019-08-08 3:11 ` Yang Xu
2019-08-08 3:57 ` Murphy Zhou
2019-08-27 10:04 ` Petr Vorel
2019-07-31 12:05 ` [LTP] [PATCH v7 1/3] lib: alter find_free_loopdev() Petr Vorel
2019-07-31 12:28 ` Cyril Hrubis
2019-07-31 12:48 ` Petr Vorel
2019-07-31 13:25 ` Cyril Hrubis
2019-07-31 21:06 ` Petr Vorel
2019-07-31 12:07 ` Petr Vorel
2019-07-10 7:47 ` [LTP] [PATCH v3 " Amir Goldstein
2019-07-10 7:32 ` [LTP] [PATCH v2] syscalls/copy_file_range02: increase coverage and remove EXDEV test Yang Xu
2019-07-08 10:38 ` [LTP] [PATCH] " Yang Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190730133530.GA32652@dell5510 \
--to=pvorel@suse.cz \
--cc=ltp@lists.linux.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox