From: Cyril Hrubis <chrubis@suse.cz>
To: ltp@lists.linux.it
Subject: [LTP] [PATCH v1 01/10] lapi: Add a configure check and fallback for loop ioctl and flag
Date: Thu, 9 Apr 2020 12:09:25 +0200 [thread overview]
Message-ID: <20200409100925.GC9792@yuki.lan> (raw)
In-Reply-To: <6bb6bc11-c3c0-48e5-0a67-80b246dfbe4b@suse.cz>
Hi!
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +/*
> > + * Copyright (c) 2020 FUJITSU LIMITED. All rights reserved.
>
> Here's a little legal issue for LTP: "GPL" and "All rights reserved" are
> mutually exclusive. Those two lines are effectively saying that your
> code is both open-source and proprietary at the same time. Please pick
> one, or the other. It can't be both.
Actually the "All rights reserved" should not have any legal effects.
The Buenos Aires Convention required that text for estabilishing
copyright which you would have needed before you could license your work
under GPL. However it's long obsolete now and has no legal effect as far
as I can tell.
Btw "All rights reserved" is part of the BSD MIT license because of
these reasons.
--
Cyril Hrubis
chrubis@suse.cz
next prev parent reply other threads:[~2020-04-09 10:09 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-02 15:06 [LTP] [PATCH v1 00/10] add loop ioctl test Yang Xu
2020-04-02 15:06 ` [LTP] [PATCH v1 01/10] lapi: Add a configure check and fallback for loop ioctl and flag Yang Xu
2020-04-03 11:44 ` Cyril Hrubis
2020-04-06 6:01 ` Yang Xu
2020-04-09 8:47 ` Martin Doucha
2020-04-09 10:09 ` Cyril Hrubis [this message]
2020-04-09 10:14 ` Yang Xu
2020-04-02 15:06 ` [LTP] [PATCH v1 02/10] syscalls/ioctl:add common c file for loop ioctl Yang Xu
2020-04-03 12:16 ` Cyril Hrubis
2020-04-09 2:42 ` Yang Xu
2020-04-02 15:06 ` [LTP] [PATCH v1 03/10] syscalls/ioctl_loop01: Add LO_FLAGS_AUTOCLEAR and LO_FLAGS_PARTSCAN test Yang Xu
2020-04-03 11:55 ` Cyril Hrubis
2020-04-06 6:27 ` Yang Xu
2020-04-09 6:10 ` Yang Xu
2020-04-09 7:55 ` Cyril Hrubis
2020-04-09 10:44 ` [LTP] [PATCH v2 01/10] lapi/loop.h: Add fallback for loop ioctl and flag Yang Xu
2020-04-09 10:44 ` [LTP] [PATCH v2 02/10] syscalls/ioctl:add common c file for loop ioctl Yang Xu
2020-04-17 15:10 ` Cyril Hrubis
2020-04-20 2:23 ` Yang Xu
2020-04-20 6:08 ` Yang Xu
2020-04-20 13:01 ` Cyril Hrubis
2020-04-21 6:19 ` Yang Xu
2020-04-21 8:55 ` Cyril Hrubis
2020-04-21 10:35 ` Yang Xu
2020-04-21 12:12 ` Cyril Hrubis
2020-04-22 3:12 ` Yang Xu
2020-04-20 12:55 ` Cyril Hrubis
2020-04-09 10:44 ` [LTP] [PATCH v2 03/10] syscalls/ioctl_loop01: Add LO_FLAGS_AUTOCLEAR and LO_FLAGS_PARTSCAN test Yang Xu
2020-04-09 10:44 ` [LTP] [PATCH v2 04/10] syscalls/ioctl_loop02: Add LO_FLAGS_READ_ONLY and LOOP_CHANGE_FD test Yang Xu
2020-04-09 10:44 ` [LTP] [PATCH v2 05/10] syscalls/ioctl_loop03: Add LOOP_CHANGE_FD test with WR mode Yang Xu
2020-04-17 15:12 ` Cyril Hrubis
2020-04-09 10:44 ` [LTP] [PATCH v2 06/10] syscalls/ioctl_loop04: Add LOOP_SET_CAPACITY ioctl test Yang Xu
2020-04-09 10:44 ` [LTP] [PATCH v2 07/10] syscalls/ioctl_loop05: Add LOOP_SET_DIRECT_IO " Yang Xu
2020-04-09 10:44 ` [LTP] [PATCH v2 08/10] syscalls/ioctl_loop06: Add LOOP_SET_BLOCK_SIZE error test Yang Xu
2020-04-22 13:57 ` Cyril Hrubis
2020-04-09 10:44 ` [LTP] [PATCH v2 09/10] syscalls/ioctl_loop07: Add dio with logic block size " Yang Xu
2020-04-22 13:58 ` Cyril Hrubis
2020-04-23 6:06 ` Yang Xu
2020-04-23 10:12 ` Yang Xu
2020-04-24 4:43 ` Yang Xu
2020-04-09 10:44 ` [LTP] [PATCH v2 10/10] syscalls/ioctl_loop08: Add LOOP_SET/GET_STATUS64 sizelimit field test Yang Xu
2020-04-28 15:44 ` Cyril Hrubis
2020-04-09 10:44 ` [LTP] [PATCH v2 00/10] add loop ioctl test Yang Xu
2020-04-09 10:50 ` [LTP] [PATCH v2 01/10] lapi/loop.h: Add fallback for loop ioctl and flag Yang Xu
2020-04-17 15:11 ` Cyril Hrubis
2020-04-27 1:24 ` [LTP] [PATCH v1 03/10] syscalls/ioctl_loop01: Add LO_FLAGS_AUTOCLEAR and LO_FLAGS_PARTSCAN test Yang Xu
2020-04-02 15:06 ` [LTP] [PATCH v1 04/10] syscalls/ioctl_loop02: Add LO_FLAGS_READ_ONLY and LOOP_CHANGE_FD test Yang Xu
2020-04-03 13:34 ` Cyril Hrubis
2020-04-06 7:24 ` Yang Xu
2020-04-02 15:06 ` [LTP] [PATCH v1 05/10] syscalls/ioctl_loop03: Add LOOP_CHANGE_FD test with WR mode Yang Xu
2020-04-02 15:06 ` [LTP] [PATCH v1 06/10] syscalls/ioctl_loop04: Add LOOP_SET_CAPACITY ioctl test Yang Xu
2020-04-02 15:06 ` [LTP] [PATCH v1 07/10] syscalls/ioctl_loop05: Add LOOP_SET_DIRECT_IO " Yang Xu
2020-04-03 16:44 ` Cyril Hrubis
2020-04-06 7:53 ` Yang Xu
2020-04-06 8:30 ` Cyril Hrubis
2020-04-02 15:06 ` [LTP] [PATCH v1 08/10] syscalls/ioctl_loop06: Add LOOP_SET_BLOCK_SIZE error test Yang Xu
2020-04-02 15:06 ` [LTP] [PATCH v1 09/10] syscalls/ioctl_loop07: Add dio with logic block size " Yang Xu
2020-04-02 15:06 ` [LTP] [PATCH v1 10/10] syscalls/ioctl_loop08: Add LOOP_SET/GET_STATUS64 sizelimit field test Yang Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200409100925.GC9792@yuki.lan \
--to=chrubis@suse.cz \
--cc=ltp@lists.linux.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox