[LTP] [PATCH v1] cgroup_core01.c: Set umask before create directory

[LTP] [PATCH v1] cgroup_core01.c: Set umask before create directory

[Wei Gao via ltp]

Some specific build's default mask is 0077, this will trigger issue if
you create directory with A but switch B to access it. Such as following
failed message will popup in current case:
cgroup_core01.c:50: TBROK: openat(21</sys/fs/cgroup/memory/ltp/test-3519/child_b>, 'tasks', 2, 0): EACCES (13)

Signed-off-by: Wei Gao <wegao@suse.com>
---
 testcases/kernel/controllers/cgroup/cgroup_core01.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/testcases/kernel/controllers/cgroup/cgroup_core01.c b/testcases/kernel/controllers/cgroup/cgroup_core01.c
index 2e695deed..0deff6209 100644
--- a/testcases/kernel/controllers/cgroup/cgroup_core01.c
+++ b/testcases/kernel/controllers/cgroup/cgroup_core01.c
@@ -38,6 +38,7 @@ static void test_lesser_euid_open(void)
 	int fds[TST_CG_ROOTS_MAX] = {-1};
 	int i, loops;
 
+	umask(0022);
 	cg_child_a = tst_cg_group_mk(tst_cg, "child_a");
 	cg_child_b = tst_cg_group_mk(tst_cg, "child_b");
 
-- 
2.35.3


-- 
Mailing list info: https://lists.linux.it/listinfo/ltp

Re: [LTP] [PATCH v1] cgroup_core01.c: Set umask before create directory

[Andrea Cervesato via ltp]

Hi!
LGTM

Reviewed-by: Andrea Cervesato <andrea.cervesato.suse.com>

On 12/4/23 01:26, Wei Gao via ltp wrote:
> Some specific build's default mask is 0077, this will trigger issue if
> you create directory with A but switch B to access it. Such as following
> failed message will popup in current case:
> cgroup_core01.c:50: TBROK: openat(21</sys/fs/cgroup/memory/ltp/test-3519/child_b>, 'tasks', 2, 0): EACCES (13)
>
> Signed-off-by: Wei Gao <wegao@suse.com>
> ---
>   testcases/kernel/controllers/cgroup/cgroup_core01.c | 1 +
>   1 file changed, 1 insertion(+)
>
> diff --git a/testcases/kernel/controllers/cgroup/cgroup_core01.c b/testcases/kernel/controllers/cgroup/cgroup_core01.c
> index 2e695deed..0deff6209 100644
> --- a/testcases/kernel/controllers/cgroup/cgroup_core01.c
> +++ b/testcases/kernel/controllers/cgroup/cgroup_core01.c
> @@ -38,6 +38,7 @@ static void test_lesser_euid_open(void)
>   	int fds[TST_CG_ROOTS_MAX] = {-1};
>   	int i, loops;
>   
> +	umask(0022);
>   	cg_child_a = tst_cg_group_mk(tst_cg, "child_a");
>   	cg_child_b = tst_cg_group_mk(tst_cg, "child_b");
>   



-- 
Mailing list info: https://lists.linux.it/listinfo/ltp

[LTP] [PATCH v2] tst_test.c: Set system default umaks to 0022

[Wei Gao via ltp]

Some system's default umask is 0077, this will trigger issues for LTP case.

Example 1:
cgroup_core01.c will report following error msg:
cgroup_core01.c:50: TBROK: openat(21</sys/fs/cgroup/memory/ltp/test-3519/child_b>, 'tasks', 2, 0): EACCES (13)

Detail reason:
Code:
cg_child_a = tst_cg_group_mk(tst_cg, "child_a");
cg_child_b = tst_cg_group_mk(tst_cg, "child_b");

Result:
wegao:/sys/fs/cgroup # ll ltp/test-25304/
drwx------ 2 root root 0 Feb 10 10:37 child_a   <<<<<< group and other has no any permission
drwx------ 2 root root 0 Feb 10 10:38 child_b

Code:
SAFE_CG_FCHOWN(cg_child_a, "cgroup.procs",  nobody_uid, -1);
SAFE_CG_FCHOWN(cg_child_b, "cgroup.procs",  nobody_uid, -1);

Result:
wegao:/sys/fs/cgroup # ll ltp/test-26388/child_a/
total 0
-rw-r--r-- 1 nobody root 0 Feb 10 10:44 cgroup.procs  <<<<<<

Code:
SAFE_SETEUID(nobody_uid); <<<< after switch to nobody then can not access child_{a,b} or any file
under child_{a,b}

Result:
nobody@wegao:/sys/fs/cgroup/ltp/test-26730> ll child_a/  <<< nobody has no permission on child_a
ls: cannot open directory 'child_a/': Permission denied

Code:
loops = SAFE_CG_OPEN(cg_child_b, "cgroup.procs", O_RDWR, fds);
Result:
cgroup_core01.c:76: TBROK: openat(9</sys/fs/cgroup/ltp/test-26388/child_b>, 'cgroup.procs', 2, 0): EACCES (13)

Example 2:
chdir01
chdir01.c:107: TFAIL: nobody: chdir("testfile") returned unexpected error: EACCES (13)

Reason:
susetest:/tmp/LTP_chd5JtblL/mntpoint # mount | grep loop0
/dev/loop0 on /tmp/LTP_chd5JtblL/mntpoint type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /var/tmp/LTP_chd5JtblL/mntpoint type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)

susetest:/tmp/LTP_chd5JtblL # ll
total 307216
drwx------ 4 root root     16384 Dec 31  1969 mntpoint <<<< nobody has no permission on mount directory
-rw------- 1 root root 314572800 Feb 19 04:51 test_dev.img

susetest:/tmp/LTP_chd5JtblL/mntpoint # ll
total 16
-rwx------ 1 root root    0 Feb 19 04:53 aa
drwx------ 2 root root 8192 Feb 19 04:50 keep_out
drwx------ 2 root root 8192 Feb 19 04:50 subdir
-rwx------ 1 root root    0 Feb 19 04:50 testfile <<<< nobody has no permission on testfile

Signed-off-by: Wei Gao <wegao@suse.com>
---
 lib/tst_test.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/lib/tst_test.c b/lib/tst_test.c
index edb42f7f4..e03fd93e7 100644
--- a/lib/tst_test.c
+++ b/lib/tst_test.c
@@ -1174,6 +1174,8 @@ static void do_setup(int argc, char *argv[])
 {
 	char *tdebug_env = getenv("LTP_ENABLE_DEBUG");
 
+	umask(0022);
+
 	if (!tst_test)
 		tst_brk(TBROK, "No tests to run");
 
-- 
2.35.3


-- 
Mailing list info: https://lists.linux.it/listinfo/ltp

Re: [LTP] [PATCH v2] tst_test.c: Set system default umaks to 0022

[Petr Vorel]

Hi Wei,

> Some system's default umask is 0077, this will trigger issues for LTP case.

> Example 1:
> cgroup_core01.c will report following error msg:
> cgroup_core01.c:50: TBROK: openat(21</sys/fs/cgroup/memory/ltp/test-3519/child_b>, 'tasks', 2, 0): EACCES (13)

> Detail reason:
> Code:
> cg_child_a = tst_cg_group_mk(tst_cg, "child_a");
> cg_child_b = tst_cg_group_mk(tst_cg, "child_b");

> Result:
> wegao:/sys/fs/cgroup # ll ltp/test-25304/
> drwx------ 2 root root 0 Feb 10 10:37 child_a   <<<<<< group and other has no any permission
> drwx------ 2 root root 0 Feb 10 10:38 child_b

> Code:
> SAFE_CG_FCHOWN(cg_child_a, "cgroup.procs",  nobody_uid, -1);
> SAFE_CG_FCHOWN(cg_child_b, "cgroup.procs",  nobody_uid, -1);

> Result:
> wegao:/sys/fs/cgroup # ll ltp/test-26388/child_a/
> total 0
> -rw-r--r-- 1 nobody root 0 Feb 10 10:44 cgroup.procs  <<<<<<

> Code:
> SAFE_SETEUID(nobody_uid); <<<< after switch to nobody then can not access child_{a,b} or any file
> under child_{a,b}

> Result:
> nobody@wegao:/sys/fs/cgroup/ltp/test-26730> ll child_a/  <<< nobody has no permission on child_a
> ls: cannot open directory 'child_a/': Permission denied

> Code:
> loops = SAFE_CG_OPEN(cg_child_b, "cgroup.procs", O_RDWR, fds);
> Result:
> cgroup_core01.c:76: TBROK: openat(9</sys/fs/cgroup/ltp/test-26388/child_b>, 'cgroup.procs', 2, 0): EACCES (13)

> Example 2:
> chdir01
> chdir01.c:107: TFAIL: nobody: chdir("testfile") returned unexpected error: EACCES (13)

> Reason:
> susetest:/tmp/LTP_chd5JtblL/mntpoint # mount | grep loop0
> /dev/loop0 on /tmp/LTP_chd5JtblL/mntpoint type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
> /dev/loop0 on /var/tmp/LTP_chd5JtblL/mntpoint type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)

> susetest:/tmp/LTP_chd5JtblL # ll
> total 307216
> drwx------ 4 root root     16384 Dec 31  1969 mntpoint <<<< nobody has no permission on mount directory
> -rw------- 1 root root 314572800 Feb 19 04:51 test_dev.img

> susetest:/tmp/LTP_chd5JtblL/mntpoint # ll
> total 16
> -rwx------ 1 root root    0 Feb 19 04:53 aa
> drwx------ 2 root root 8192 Feb 19 04:50 keep_out
> drwx------ 2 root root 8192 Feb 19 04:50 subdir
> -rwx------ 1 root root    0 Feb 19 04:50 testfile <<<< nobody has no permission on testfile

> Signed-off-by: Wei Gao <wegao@suse.com>
> ---
>  lib/tst_test.c | 2 ++
>  1 file changed, 2 insertions(+)

> diff --git a/lib/tst_test.c b/lib/tst_test.c
> index edb42f7f4..e03fd93e7 100644
> --- a/lib/tst_test.c
> +++ b/lib/tst_test.c
> @@ -1174,6 +1174,8 @@ static void do_setup(int argc, char *argv[])
>  {
>  	char *tdebug_env = getenv("LTP_ENABLE_DEBUG");

> +	umask(0022);

I don't think this is a good idea. Changing umask() in the library can influent
tests. Could you please instead add umask(0) (to reset umask) on the tests which
need it? The way it's done in open07.c.

Kind regards,
Petr

-- 
Mailing list info: https://lists.linux.it/listinfo/ltp

[LTP] [PATCH v3 0/2] Set system default umaks to 0022

[Wei Gao via ltp]

Wei Gao (2):
  cgroup_core01.c: Set system default umaks to 0022
  statx07.c: set umask to 0022

 testcases/kernel/controllers/cgroup/cgroup_core01.c | 2 ++
 testcases/kernel/syscalls/statx/statx07.c           | 2 ++
 2 files changed, 4 insertions(+)

-- 
2.35.3


-- 
Mailing list info: https://lists.linux.it/listinfo/ltp

[LTP] [PATCH v3 1/2] cgroup_core01.c: Set system default umaks to 0022

[Wei Gao via ltp]

When system's default umask is 0077, this will trigger issues for LTP case.

cgroup_core01.c will report following error msg:
cgroup_core01.c:50: TBROK: openat(21</sys/fs/cgroup/memory/ltp/test-3519/child_b>, 'tasks', 2, 0): EACCES (13)

Detail reason:
Code:
cg_child_a = tst_cg_group_mk(tst_cg, "child_a");
cg_child_b = tst_cg_group_mk(tst_cg, "child_b");

Result:
wegao:/sys/fs/cgroup # ll ltp/test-25304/
drwx------ 2 root root 0 Feb 10 10:37 child_a   <<<<<< group and other has no any permission
drwx------ 2 root root 0 Feb 10 10:38 child_b

Code:
SAFE_CG_FCHOWN(cg_child_a, "cgroup.procs",  nobody_uid, -1);
SAFE_CG_FCHOWN(cg_child_b, "cgroup.procs",  nobody_uid, -1);

Result:
wegao:/sys/fs/cgroup # ll ltp/test-26388/child_a/
total 0
-rw-r--r-- 1 nobody root 0 Feb 10 10:44 cgroup.procs  <<<<<<

Code:
SAFE_SETEUID(nobody_uid); <<<< after switch to nobody then can not access child_{a,b} or any file
under child_{a,b}

Result:
nobody@wegao:/sys/fs/cgroup/ltp/test-26730> ll child_a/  <<< nobody has no permission on child_a
ls: cannot open directory 'child_a/': Permission denied

Code:
loops = SAFE_CG_OPEN(cg_child_b, "cgroup.procs", O_RDWR, fds);
Result:
cgroup_core01.c:76: TBROK: openat(9</sys/fs/cgroup/ltp/test-26388/child_b>, 'cgroup.procs', 2, 0): EACCES (13)

Signed-off-by: Wei Gao <wegao@suse.com>
---
 testcases/kernel/controllers/cgroup/cgroup_core01.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/testcases/kernel/controllers/cgroup/cgroup_core01.c b/testcases/kernel/controllers/cgroup/cgroup_core01.c
index 2e695deed..80d13a9c5 100644
--- a/testcases/kernel/controllers/cgroup/cgroup_core01.c
+++ b/testcases/kernel/controllers/cgroup/cgroup_core01.c
@@ -76,6 +76,8 @@ static void setup(void)
 {
 	struct passwd *pw;
 
+	umask(0022);
+
 	pw = SAFE_GETPWNAM("nobody");
 	nobody_uid = pw->pw_uid;
 	save_uid = geteuid();
-- 
2.35.3


-- 
Mailing list info: https://lists.linux.it/listinfo/ltp

[LTP] [PATCH v3 2/2] statx07.c: set umask to 0022

[Wei Gao via ltp]

When system's default umask is 0077, this will trigger issues.

Signed-off-by: Wei Gao <wegao@suse.com>
---
 testcases/kernel/syscalls/statx/statx07.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/testcases/kernel/syscalls/statx/statx07.c b/testcases/kernel/syscalls/statx/statx07.c
index 4dbf83e18..1ad02fb3e 100644
--- a/testcases/kernel/syscalls/statx/statx07.c
+++ b/testcases/kernel/syscalls/statx/statx07.c
@@ -116,6 +116,8 @@ static void setup(void)
 	int ret;
 	char server_path[BUFF_SIZE];
 
+	umask(0022);
+
 	cwd = tst_get_tmpdir();
 
 	SAFE_MKDIR(SERV_PATH, DEFAULT_MODE);
-- 
2.35.3


-- 
Mailing list info: https://lists.linux.it/listinfo/ltp

Re: [LTP] [PATCH v3 2/2] statx07.c: set umask to 0022

[Petr Vorel]

Hi Wei,

> When system's default umask is 0077, this will trigger issues.

> Signed-off-by: Wei Gao <wegao@suse.com>
> ---
>  testcases/kernel/syscalls/statx/statx07.c | 2 ++
>  1 file changed, 2 insertions(+)

> diff --git a/testcases/kernel/syscalls/statx/statx07.c b/testcases/kernel/syscalls/statx/statx07.c
> index 4dbf83e18..1ad02fb3e 100644
> --- a/testcases/kernel/syscalls/statx/statx07.c
> +++ b/testcases/kernel/syscalls/statx/statx07.c
> @@ -116,6 +116,8 @@ static void setup(void)
>  	int ret;
>  	char server_path[BUFF_SIZE];

> +	umask(0022);
Even this works, why not completely reset umask with umask(0), as I asked
previously? That's the safest option.

Kind regards,
Petr

> +
>  	cwd = tst_get_tmpdir();

>  	SAFE_MKDIR(SERV_PATH, DEFAULT_MODE);

-- 
Mailing list info: https://lists.linux.it/listinfo/ltp

Re: [LTP] [PATCH v2] tst_test.c: Set system default umaks to 0022

[Wei Gao via ltp]

On Tue, Feb 20, 2024 at 10:18:37AM +0100, Petr Vorel wrote:
> Hi Wei,
> 
> >  	char *tdebug_env = getenv("LTP_ENABLE_DEBUG");
> 
> > +	umask(0022);
> 
> I don't think this is a good idea. Changing umask() in the library can influent
> tests. Could you please instead add umask(0) (to reset umask) on the tests which
> need it? The way it's done in open07.c.

cgroup_core01.c and statx07.c can use umask(0) in tests and i have updated the patch.

But chdir01 will still failed on vfat and exfat. Like following error msg:
chdir01.c:100: TFAIL: nobody: chdir("subdir") returned unexpected value -1: EACCES (13)

The reason is umask(0) should set before mount /dev/loop0 to /tmp/xxx/mntpoint, otherwise you 
have no chance modify permission of file. What's your suggestion?

susetest:/tmp/LTP_chd5JtblL/mntpoint # mount | grep loop0
/dev/loop0 on /tmp/LTP_chd5JtblL/mntpoint type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /var/tmp/LTP_chd5JtblL/mntpoint type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)

susetest:/tmp/LTP_chd5JtblL # chmod 777 mntpoint <<<< 
susetest:/tmp/LTP_chd5JtblL # ll
total 307216
drwx------ 4 root root     16384 Dec 31  1969 mntpoint  <<<<<<<< group and other has no any permission even try chmod
-rw------- 1 root root 314572800 Feb 19 04:51 test_dev.img

susetest:/tmp/LTP_chd5JtblL/mntpoint # touch aa
susetest:/tmp/LTP_chd5JtblL/mntpoint # ll
total 16
-rwx------ 1 root root    0a
drwx------ 2 root root 8192 Feb 19 04:50 keep_out
drwx------ 2 root root 8192 Feb 19 04:50 subdir
-rwx------ 1 root root    0 Feb 19 04:50 testfile <<<<<<

Thanks.

> 
> Kind regards,
> Petr

-- 
Mailing list info: https://lists.linux.it/listinfo/ltp

[LTP] [PATCH v3 0/2] Set system default umaks to 0

[Wei Gao via ltp]

Wei Gao (2):
  cgroup_core01.c: Set system default umaks to 0
  statx07.c: set umask to 0

 testcases/kernel/controllers/cgroup/cgroup_core01.c | 2 ++
 testcases/kernel/syscalls/statx/statx07.c           | 2 ++
 2 files changed, 4 insertions(+)

-- 
2.35.3


-- 
Mailing list info: https://lists.linux.it/listinfo/ltp

[LTP] [PATCH v4 1/2] cgroup_core01.c: Set system default umaks to 0

[Wei Gao via ltp]

When system's default umask is 0077, this will trigger issues for LTP case.

cgroup_core01.c will report following error msg:
cgroup_core01.c:50: TBROK: openat(21</sys/fs/cgroup/memory/ltp/test-3519/child_b>, 'tasks', 2, 0): EACCES (13)

Detail reason:
Code:
cg_child_a = tst_cg_group_mk(tst_cg, "child_a");
cg_child_b = tst_cg_group_mk(tst_cg, "child_b");

Result:
wegao:/sys/fs/cgroup # ll ltp/test-25304/
drwx------ 2 root root 0 Feb 10 10:37 child_a   <<<<<< group and other has no any permission
drwx------ 2 root root 0 Feb 10 10:38 child_b

Code:
SAFE_CG_FCHOWN(cg_child_a, "cgroup.procs",  nobody_uid, -1);
SAFE_CG_FCHOWN(cg_child_b, "cgroup.procs",  nobody_uid, -1);

Result:
wegao:/sys/fs/cgroup # ll ltp/test-26388/child_a/
total 0
-rw-r--r-- 1 nobody root 0 Feb 10 10:44 cgroup.procs  <<<<<<

Code:
SAFE_SETEUID(nobody_uid); <<<< after switch to nobody then can not access child_{a,b} or any file
under child_{a,b}

Result:
nobody@wegao:/sys/fs/cgroup/ltp/test-26730> ll child_a/  <<< nobody has no permission on child_a
ls: cannot open directory 'child_a/': Permission denied

Code:
loops = SAFE_CG_OPEN(cg_child_b, "cgroup.procs", O_RDWR, fds);
Result:
cgroup_core01.c:76: TBROK: openat(9</sys/fs/cgroup/ltp/test-26388/child_b>, 'cgroup.procs', 2, 0): EACCES (13)

Signed-off-by: Wei Gao <wegao@suse.com>
---
 testcases/kernel/controllers/cgroup/cgroup_core01.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/testcases/kernel/controllers/cgroup/cgroup_core01.c b/testcases/kernel/controllers/cgroup/cgroup_core01.c
index 2e695deed..ad08c74a9 100644
--- a/testcases/kernel/controllers/cgroup/cgroup_core01.c
+++ b/testcases/kernel/controllers/cgroup/cgroup_core01.c
@@ -76,6 +76,8 @@ static void setup(void)
 {
 	struct passwd *pw;
 
+	umask(0);
+
 	pw = SAFE_GETPWNAM("nobody");
 	nobody_uid = pw->pw_uid;
 	save_uid = geteuid();
-- 
2.35.3


-- 
Mailing list info: https://lists.linux.it/listinfo/ltp

[LTP] [PATCH v4 2/2] statx07.c: set umask to 0

[Wei Gao via ltp]

When system's default umask is 0077, this will trigger issues.

Signed-off-by: Wei Gao <wegao@suse.com>
---
 testcases/kernel/syscalls/statx/statx07.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/testcases/kernel/syscalls/statx/statx07.c b/testcases/kernel/syscalls/statx/statx07.c
index 4dbf83e18..227c33c96 100644
--- a/testcases/kernel/syscalls/statx/statx07.c
+++ b/testcases/kernel/syscalls/statx/statx07.c
@@ -116,6 +116,8 @@ static void setup(void)
 	int ret;
 	char server_path[BUFF_SIZE];
 
+	umask(0);
+
 	cwd = tst_get_tmpdir();
 
 	SAFE_MKDIR(SERV_PATH, DEFAULT_MODE);
-- 
2.35.3


-- 
Mailing list info: https://lists.linux.it/listinfo/ltp

Re: [LTP] [PATCH v2] tst_test.c: Set system default umaks to 0022

[Petr Vorel]

Hi all,

> On Tue, Feb 20, 2024 at 10:18:37AM +0100, Petr Vorel wrote:
> > Hi Wei,

> > >  	char *tdebug_env = getenv("LTP_ENABLE_DEBUG");

> > > +	umask(0022);

> > I don't think this is a good idea. Changing umask() in the library can influent
> > tests. Could you please instead add umask(0) (to reset umask) on the tests which
> > need it? The way it's done in open07.c.

First I thought that modifying umask (either with umask(0022) or just reset with
umask(0)) is not a good idea, but now I'm not sure:

1) We have quite a few tests, which will needs it:
NEW API tests:
$ git grep '^\s*umask(0' $(git grep -l tst_test.h) | wc -l
15

All tests:
$ git grep '^\s*umask(0' testcases/ | wc -l
34

And for sure some other, which will fail when too restrictive umask is set.

Wouldn't be better to have it in the library? Hopefully fewer tests would be
influenced this setup (and would need to set different umask()).

> cgroup_core01.c and statx07.c can use umask(0) in tests and i have updated the patch.

> But chdir01 will still failed on vfat and exfat. Like following error msg:
> chdir01.c:100: TFAIL: nobody: chdir("subdir") returned unexpected value -1: EACCES (13)

FYI test fails on vfat and ntfs when umask is 0077 (because override file and
directory permissions) (other filesystems are ok).

> The reason is umask(0) should set before mount /dev/loop0 to /tmp/xxx/mntpoint, otherwise you 
> have no chance modify permission of file. What's your suggestion?

> susetest:/tmp/LTP_chd5JtblL/mntpoint # mount | grep loop0
> /dev/loop0 on /tmp/LTP_chd5JtblL/mntpoint type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
> /dev/loop0 on /var/tmp/LTP_chd5JtblL/mntpoint type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)

2) tests, which set .mount_device = 1 and have more restrictive umask will not
work. Workaround would be to not use it and mount manually in the setup().
Or, reset umask with umask(0).

WDYT?

Kind regards,
Petr

> susetest:/tmp/LTP_chd5JtblL # chmod 777 mntpoint <<<< 
> susetest:/tmp/LTP_chd5JtblL # ll
> total 307216
> drwx------ 4 root root     16384 Dec 31  1969 mntpoint  <<<<<<<< group and other has no any permission even try chmod
> -rw------- 1 root root 314572800 Feb 19 04:51 test_dev.img

> susetest:/tmp/LTP_chd5JtblL/mntpoint # touch aa
> susetest:/tmp/LTP_chd5JtblL/mntpoint # ll
> total 16
> -rwx------ 1 root root    0a
> drwx------ 2 root root 8192 Feb 19 04:50 keep_out
> drwx------ 2 root root 8192 Feb 19 04:50 subdir
> -rwx------ 1 root root    0 Feb 19 04:50 testfile <<<<<<

> Thanks.


> > Kind regards,
> > Petr

-- 
Mailing list info: https://lists.linux.it/listinfo/ltp

[LTP] [PATCH v5 0/2] Set system default umaks to 0

[Wei Gao via ltp]

Wei Gao (2):
  cgroup_core01.c: Set system default umaks to 0
  statx07.c: set umask to 0

 testcases/kernel/controllers/cgroup/cgroup_core01.c | 2 ++
 testcases/kernel/syscalls/statx/statx07.c           | 2 ++
 2 files changed, 4 insertions(+)

-- 
2.35.3


-- 
Mailing list info: https://lists.linux.it/listinfo/ltp

[LTP] [PATCH v5 1/2] cgroup_core01.c: Set system default umaks to 0

[Wei Gao via ltp]

When system's default umask is 0077, following error will popup:
cgroup_core01.c:50: TBROK: openat(21</sys/fs/cgroup/memory/ltp/test-3519/child_b>, 'tasks', 2, 0): EACCES (13)

The reason is default user will create directory without permission for group and other if umask(0077), then error happen
if case switch to nobody user.

Signed-off-by: Wei Gao <wegao@suse.com>
---
 testcases/kernel/controllers/cgroup/cgroup_core01.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/testcases/kernel/controllers/cgroup/cgroup_core01.c b/testcases/kernel/controllers/cgroup/cgroup_core01.c
index 2e695deed..ad08c74a9 100644
--- a/testcases/kernel/controllers/cgroup/cgroup_core01.c
+++ b/testcases/kernel/controllers/cgroup/cgroup_core01.c
@@ -76,6 +76,8 @@ static void setup(void)
 {
 	struct passwd *pw;
 
+	umask(0);
+
 	pw = SAFE_GETPWNAM("nobody");
 	nobody_uid = pw->pw_uid;
 	save_uid = geteuid();
-- 
2.35.3


-- 
Mailing list info: https://lists.linux.it/listinfo/ltp

[LTP] [PATCH v5 2/2] statx07.c: set umask to 0

[Wei Gao via ltp]

When system's default umask is 0077, this will trigger following issues:
statx07.c:108: TFAIL: statx() with AT_STATX_DONT_SYNC for mode 644 600

Signed-off-by: Wei Gao <wegao@suse.com>
---
 testcases/kernel/syscalls/statx/statx07.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/testcases/kernel/syscalls/statx/statx07.c b/testcases/kernel/syscalls/statx/statx07.c
index 4dbf83e18..227c33c96 100644
--- a/testcases/kernel/syscalls/statx/statx07.c
+++ b/testcases/kernel/syscalls/statx/statx07.c
@@ -116,6 +116,8 @@ static void setup(void)
 	int ret;
 	char server_path[BUFF_SIZE];
 
+	umask(0);
+
 	cwd = tst_get_tmpdir();
 
 	SAFE_MKDIR(SERV_PATH, DEFAULT_MODE);
-- 
2.35.3


-- 
Mailing list info: https://lists.linux.it/listinfo/ltp

Re: [LTP] [PATCH v2] tst_test.c: Set system default umaks to 0022

[Wei Gao via ltp]

On Wed, Feb 21, 2024 at 05:19:07PM +0100, Petr Vorel wrote:
> Hi all,
> 
> > On Tue, Feb 20, 2024 at 10:18:37AM +0100, Petr Vorel wrote:
> > > Hi Wei,
> 
> > > >  	char *tdebug_env = getenv("LTP_ENABLE_DEBUG");
> 
> > > > +	umask(0022);
> 
> > > I don't think this is a good idea. Changing umask() in the library can influent
> > > tests. Could you please instead add umask(0) (to reset umask) on the tests which
> > > need it? The way it's done in open07.c.
> 
> First I thought that modifying umask (either with umask(0022) or just reset with
> umask(0)) is not a good idea, but now I'm not sure:
> 
> 1) We have quite a few tests, which will needs it:
> NEW API tests:
> $ git grep '^\s*umask(0' $(git grep -l tst_test.h) | wc -l
> 15
> 
> All tests:
> $ git grep '^\s*umask(0' testcases/ | wc -l
> 34
> 
> And for sure some other, which will fail when too restrictive umask is set.
> 
> Wouldn't be better to have it in the library? Hopefully fewer tests would be
> influenced this setup (and would need to set different umask()).
> 
> > cgroup_core01.c and statx07.c can use umask(0) in tests and i have updated the patch.
> 
> > But chdir01 will still failed on vfat and exfat. Like following error msg:
> > chdir01.c:100: TFAIL: nobody: chdir("subdir") returned unexpected value -1: EACCES (13)
> 
> FYI test fails on vfat and ntfs when umask is 0077 (because override file and
> directory permissions) (other filesystems are ok).
> 
> > The reason is umask(0) should set before mount /dev/loop0 to /tmp/xxx/mntpoint, otherwise you 
> > have no chance modify permission of file. What's your suggestion?
> 
> > susetest:/tmp/LTP_chd5JtblL/mntpoint # mount | grep loop0
> > /dev/loop0 on /tmp/LTP_chd5JtblL/mntpoint type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
> > /dev/loop0 on /var/tmp/LTP_chd5JtblL/mntpoint type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
> 
> 2) tests, which set .mount_device = 1 and have more restrictive umask will not
> work. Workaround would be to not use it and mount manually in the setup().
> Or, reset umask with umask(0).
> 
> WDYT?

Currently i only need fix one case chdir01 so i will try to do workaround(mount mount manually in setup).
If new fail happen in future then i suppose we need consider do umask in lib.

Thanks for your comments.

> 
> Kind regards,
> Petr
> 
> > susetest:/tmp/LTP_chd5JtblL # chmod 777 mntpoint <<<< 
> > susetest:/tmp/LTP_chd5JtblL # ll
> > total 307216
> > drwx------ 4 root root     16384 Dec 31  1969 mntpoint  <<<<<<<< group and other has no any permission even try chmod
> > -rw------- 1 root root 314572800 Feb 19 04:51 test_dev.img
> 
> > susetest:/tmp/LTP_chd5JtblL/mntpoint # touch aa
> > susetest:/tmp/LTP_chd5JtblL/mntpoint # ll
> > total 16
> > -rwx------ 1 root root    0a
> > drwx------ 2 root root 8192 Feb 19 04:50 keep_out
> > drwx------ 2 root root 8192 Feb 19 04:50 subdir
> > -rwx------ 1 root root    0 Feb 19 04:50 testfile <<<<<<
> 
> > Thanks.
> 
> 
> > > Kind regards,
> > > Petr

-- 
Mailing list info: https://lists.linux.it/listinfo/ltp

Re: [LTP] [PATCH v5 1/2] cgroup_core01.c: Set system default umaks to 0

[Li Wang]

Hi Wei, Petr,

Seems the problem Wei met is the default umask of 0077,
any new files or directories that are created will have their
permission bits modified by this umask.

After looking though what you both discussed, I think maybe
another better choice is to set the umask to '0000' temporarily
before creating the directory, and then restoring the previous
umask right after.

All these operations are just put into cgroup_dir_mk function.

Something like this:

--- a/lib/tst_cgroup.c
+++ b/lib/tst_cgroup.c
@@ -368,8 +368,11 @@ static void cgroup_dir_mk(const struct cgroup_dir
*const parent,
        new->ctrl_field = parent->ctrl_field;
        new->we_created_it = 0;

+       mode_t old_umask = umask(0000);
+
        if (!mkdirat(parent->dir_fd, dir_name, 0777)) {
                new->we_created_it = 1;
+               umask(old_umask);
                goto opendir;
        }



-- 
Regards,
Li Wang

-- 
Mailing list info: https://lists.linux.it/listinfo/ltp

Re: [LTP] [PATCH v5 2/2] statx07.c: set umask to 0

[Li Wang]

On Thu, Feb 22, 2024 at 11:11 AM Wei Gao via ltp <ltp@lists.linux.it> wrote:

> When system's default umask is 0077, this will trigger following issues:
> statx07.c:108: TFAIL: statx() with AT_STATX_DONT_SYNC for mode 644 600
>
> Signed-off-by: Wei Gao <wegao@suse.com>
> ---
>  testcases/kernel/syscalls/statx/statx07.c | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/testcases/kernel/syscalls/statx/statx07.c
> b/testcases/kernel/syscalls/statx/statx07.c
> index 4dbf83e18..227c33c96 100644
> --- a/testcases/kernel/syscalls/statx/statx07.c
> +++ b/testcases/kernel/syscalls/statx/statx07.c
> @@ -116,6 +116,8 @@ static void setup(void)
>         int ret;
>         char server_path[BUFF_SIZE];
>
> +       umask(0);
> +
>         cwd = tst_get_tmpdir();
>
>         SAFE_MKDIR(SERV_PATH, DEFAULT_MODE);
>

Better to restore the old mask right after.

Otherwise looks good.


-- 
Regards,
Li Wang

-- 
Mailing list info: https://lists.linux.it/listinfo/ltp

Re: [LTP] [PATCH v5 1/2] cgroup_core01.c: Set system default umaks to 0

[Petr Vorel]

Hi Li,

> Hi Wei, Petr,

> Seems the problem Wei met is the default umask of 0077,
> any new files or directories that are created will have their
> permission bits modified by this umask.

> After looking though what you both discussed, I think maybe
> another better choice is to set the umask to '0000' temporarily
> before creating the directory, and then restoring the previous
> umask right after.

> All these operations are just put into cgroup_dir_mk function.

LGTM this approach, please send a patch.

> Something like this:

> --- a/lib/tst_cgroup.c
> +++ b/lib/tst_cgroup.c
> @@ -368,8 +368,11 @@ static void cgroup_dir_mk(const struct cgroup_dir
> *const parent,
>         new->ctrl_field = parent->ctrl_field;
>         new->we_created_it = 0;

> +       mode_t old_umask = umask(0000);
nit: umask(0) is the same right?

Kind regards,
Petr

> +
>         if (!mkdirat(parent->dir_fd, dir_name, 0777)) {
>                 new->we_created_it = 1;
> +               umask(old_umask);
>                 goto opendir;
>         }

-- 
Mailing list info: https://lists.linux.it/listinfo/ltp

Re: [LTP] [PATCH v5 1/2] cgroup_core01.c: Set system default umaks to 0

[Li Wang]

On Fri, Mar 1, 2024 at 4:43 PM Petr Vorel <pvorel@suse.cz> wrote:

> Hi Li,
>
> > Hi Wei, Petr,
>
> > Seems the problem Wei met is the default umask of 0077,
> > any new files or directories that are created will have their
> > permission bits modified by this umask.
>
> > After looking though what you both discussed, I think maybe
> > another better choice is to set the umask to '0000' temporarily
> > before creating the directory, and then restoring the previous
> > umask right after.
>
> > All these operations are just put into cgroup_dir_mk function.
>
> LGTM this approach, please send a patch.
>

Ok, sure.


> > +       mode_t old_umask = umask(0000);
> nit: umask(0) is the same right?
>

exactly.


-- 
Regards,
Li Wang

-- 
Mailing list info: https://lists.linux.it/listinfo/ltp

Re: [LTP] [PATCH v5 2/2] statx07.c: set umask to 0

[Petr Vorel]

> On Thu, Feb 22, 2024 at 11:11 AM Wei Gao via ltp <ltp@lists.linux.it> wrote:

> > When system's default umask is 0077, this will trigger following issues:
> > statx07.c:108: TFAIL: statx() with AT_STATX_DONT_SYNC for mode 644 600

> > Signed-off-by: Wei Gao <wegao@suse.com>
> > ---
> >  testcases/kernel/syscalls/statx/statx07.c | 2 ++
> >  1 file changed, 2 insertions(+)

> > diff --git a/testcases/kernel/syscalls/statx/statx07.c
> > b/testcases/kernel/syscalls/statx/statx07.c
> > index 4dbf83e18..227c33c96 100644
> > --- a/testcases/kernel/syscalls/statx/statx07.c
> > +++ b/testcases/kernel/syscalls/statx/statx07.c
> > @@ -116,6 +116,8 @@ static void setup(void)
> >         int ret;
> >         char server_path[BUFF_SIZE];

> > +       umask(0);
> > +
> >         cwd = tst_get_tmpdir();

> >         SAFE_MKDIR(SERV_PATH, DEFAULT_MODE);


> Better to restore the old mask right after.

+1, Wei, can you please send new version?

> Otherwise looks good.

Kind regards,
Petr

-- 
Mailing list info: https://lists.linux.it/listinfo/ltp