public inbox for ltp@lists.linux.it
 help / color / mirror / Atom feed
From: Andrea Cervesato <andrea.cervesato@suse.de>
To: ltp@lists.linux.it
Subject: [LTP] [PATCH v2 1/2] Fix unlink09 test
Date: Wed, 05 Jun 2024 16:40:38 +0200	[thread overview]
Message-ID: <20240605-unlink09-v2-1-bfa0bbdc8753@suse.com> (raw)
In-Reply-To: <20240605-unlink09-v2-0-bfa0bbdc8753@suse.com>

From: Andrea Cervesato <andrea.cervesato@suse.com>

This patch will fix unlink09 test by checking for filesystems which
are not supporting inode attributes. At the same time, it removes the
read-only filesystem unlink() check in order to add .all_filesystems
support.

Fixes: 2cf78f47a6 (unlink: Add error tests for EPERM and EROFS)
Signed-off-by: Andrea Cervesato <andrea.cervesato@suse.com>
---
 testcases/kernel/syscalls/unlink/unlink09.c | 94 +++++++++++++++--------------
 1 file changed, 50 insertions(+), 44 deletions(-)

diff --git a/testcases/kernel/syscalls/unlink/unlink09.c b/testcases/kernel/syscalls/unlink/unlink09.c
index cc4b4a07e..220a810cf 100644
--- a/testcases/kernel/syscalls/unlink/unlink09.c
+++ b/testcases/kernel/syscalls/unlink/unlink09.c
@@ -2,92 +2,97 @@
 /*
  * Copyright (c) 2024 FUJITSU LIMITED. All Rights Reserved.
  * Author: Yang Xu <xuyang2018.jy@fujitsu.com>
+ * Copyright (C) 2024 SUSE LLC Andrea Cervesato <andrea.cervesato@suse.com>
  */
 
 /*\
  * [Description]
  *
- * Verify that unlink(2) fails with
- *
- * - EPERM when target file is marked as immutable or append-only
- * - EROFS when target file is on a read-only filesystem.
+ * Verify that unlink(2) fails with EPERM when target file is marked as
+ * immutable or append-only.
  */
 
 #include <sys/ioctl.h>
 #include "tst_test.h"
 #include "lapi/fs.h"
 
-#define TEST_EPERM_IMMUTABLE "test_eperm_immutable"
-#define TEST_EPERM_APPEND_ONLY "test_eperm_append_only"
-#define DIR_EROFS "erofs"
-#define TEST_EROFS "erofs/test_erofs"
+#define MNTPOINT "mnt"
+#define TEST_EPERM_IMMUTABLE MNTPOINT"/test_eperm_immutable"
+#define TEST_EPERM_APPEND_ONLY MNTPOINT"/test_eperm_append_only"
 
-static int fd_immutable;
-static int fd_append_only;
+static int fd_immutable = -1;
+static int fd_append_only = -1;
 
 static struct test_case_t {
 	char *filename;
 	int *fd;
 	int flag;
-	int expected_errno;
 	char *desc;
 } tcases[] = {
-	{TEST_EPERM_IMMUTABLE, &fd_immutable, FS_IMMUTABLE_FL, EPERM,
+	{TEST_EPERM_IMMUTABLE, &fd_immutable, FS_IMMUTABLE_FL,
 		"target file is immutable"},
-	{TEST_EPERM_APPEND_ONLY, &fd_append_only, FS_APPEND_FL, EPERM,
+	{TEST_EPERM_APPEND_ONLY, &fd_append_only, FS_APPEND_FL,
 		"target file is append-only"},
-	{TEST_EROFS, NULL, 0, EROFS, "target file in read-only filesystem"},
 };
 
+static void setup_inode_flag(const int fd, const int flag, const int reset)
+{
+	int attr;
+
+	SAFE_IOCTL(fd, FS_IOC_GETFLAGS, &attr);
+
+	if (reset)
+		attr &= ~flag;
+	else
+		attr |= flag;
+
+	SAFE_IOCTL(fd, FS_IOC_SETFLAGS, &attr);
+}
+
 static void setup(void)
 {
 	int attr;
 
-	fd_immutable = SAFE_OPEN(TEST_EPERM_IMMUTABLE, O_CREAT, 0600);
-	SAFE_IOCTL(fd_immutable, FS_IOC_GETFLAGS, &attr);
+	fd_immutable = SAFE_CREAT(TEST_EPERM_IMMUTABLE, 0600);
+	TEST(ioctl(fd_immutable, FS_IOC_GETFLAGS, &attr));
+
+	if (TST_RET == -1 && TST_ERR == ENOTTY) {
+		SAFE_CLOSE(fd_immutable);
+
+		tst_brk(TBROK, "Inode attributes not supported by '%s'",
+			tst_device->fs_type);
+	}
+
 	attr |= FS_IMMUTABLE_FL;
 	SAFE_IOCTL(fd_immutable, FS_IOC_SETFLAGS, &attr);
 
-	fd_append_only = SAFE_OPEN(TEST_EPERM_APPEND_ONLY, O_CREAT, 0600);
-	SAFE_IOCTL(fd_append_only, FS_IOC_GETFLAGS, &attr);
-	attr |= FS_APPEND_FL;
-	SAFE_IOCTL(fd_append_only, FS_IOC_SETFLAGS, &attr);
+	fd_append_only = SAFE_CREAT(TEST_EPERM_APPEND_ONLY, 0600);
+	setup_inode_flag(fd_append_only, FS_APPEND_FL, 0);
 }
 
 static void cleanup(void)
 {
-	int attr;
-
-	SAFE_IOCTL(fd_immutable, FS_IOC_GETFLAGS, &attr);
-	attr &= ~FS_IMMUTABLE_FL;
-	SAFE_IOCTL(fd_immutable, FS_IOC_SETFLAGS, &attr);
-	SAFE_CLOSE(fd_immutable);
+	if (fd_immutable != -1) {
+		setup_inode_flag(fd_immutable, FS_IMMUTABLE_FL, 1);
+		SAFE_CLOSE(fd_immutable);
+	}
 
-	SAFE_IOCTL(fd_append_only, FS_IOC_GETFLAGS, &attr);
-	attr &= ~FS_APPEND_FL;
-	SAFE_IOCTL(fd_append_only, FS_IOC_SETFLAGS, &attr);
-	SAFE_CLOSE(fd_append_only);
+	if (fd_append_only != -1) {
+		setup_inode_flag(fd_append_only, FS_APPEND_FL, 1);
+		SAFE_CLOSE(fd_append_only);
+	}
 }
 
 static void verify_unlink(unsigned int i)
 {
 	struct test_case_t *tc = &tcases[i];
-	int attr;
 
-	TST_EXP_FAIL(unlink(tc->filename), tc->expected_errno, "%s", tc->desc);
+	TST_EXP_FAIL(unlink(tc->filename), EPERM, "%s", tc->desc);
 
 	/* If unlink() succeeded unexpectedly, test file should be restored. */
 	if (!TST_RET) {
-		if (tc->fd) {
-			*(tc->fd) = SAFE_OPEN(tc->filename, O_CREAT, 0600);
-			if (tc->flag) {
-				SAFE_IOCTL(*(tc->fd), FS_IOC_GETFLAGS, &attr);
-				attr |= tc->flag;
-				SAFE_IOCTL(*(tc->fd), FS_IOC_SETFLAGS, &attr);
-			}
-		} else {
-			SAFE_TOUCH(tc->filename, 0600, 0);
-		}
+		*(tc->fd) = SAFE_CREAT(tc->filename, 0600);
+		setup_inode_flag(*(tc->fd), tc->flag, 0);
 	}
 }
 
@@ -96,7 +101,8 @@ static struct tst_test test = {
 	.tcnt = ARRAY_SIZE(tcases),
 	.cleanup = cleanup,
 	.test = verify_unlink,
-	.needs_rofs = 1,
-	.mntpoint = DIR_EROFS,
+	.mntpoint = MNTPOINT,
 	.needs_root = 1,
+	.all_filesystems = 1,
+	.format_device = 1,
 };

-- 
2.35.3


-- 
Mailing list info: https://lists.linux.it/listinfo/ltp

  reply	other threads:[~2024-06-05 14:42 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-05 14:40 [LTP] [PATCH v2 0/2] Fix unlink09 test Andrea Cervesato
2024-06-05 14:40 ` Andrea Cervesato [this message]
2024-06-19 15:50   ` [LTP] [PATCH v2 1/2] " Petr Vorel
2024-06-05 14:40 ` [LTP] [PATCH v2 2/2] Add unlink10 test Andrea Cervesato
2024-06-06 22:10   ` Wei Gao via ltp
2024-06-06 22:59   ` Wei Gao via ltp
2024-06-19 16:05     ` Petr Vorel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240605-unlink09-v2-1-bfa0bbdc8753@suse.com \
    --to=andrea.cervesato@suse.de \
    --cc=ltp@lists.linux.it \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox