From: Petr Vorel <pvorel@suse.cz>
To: Avinesh Kumar <avinesh.kumar@suse.com>
Cc: ltp@lists.linux.it
Subject: Re: [LTP] [PATCH v2 2/5] lib: Add support for max_kver to struct tst_test and tst_fs
Date: Thu, 30 Jul 2026 16:08:28 +0200 [thread overview]
Message-ID: <20260730140828.GA83115@pevik> (raw)
In-Reply-To: <5e27b4ff-af04-49ef-a830-934164486892@suse.com>
Hi Avinesh,
> > > > - * @min_kver: A minimal kernel version the test can run on. e.g. "3.10".
> > > > + * @min_kver: A minimal kernel version the test can run on. e.g. "4.4".
> > > s/minimal/minimum
> > You spotted more grammar errors so I trust you :). But can you please double
> > check that it'đ really correct? Minimal is an adjective, minimum is an adjective
> > but also a noun and an adverb.
> > When googling I even found use of both in the same document :)
> > https://kubernetes.io/docs/reference/node/kernel-version-requirements/
> > "have minimum kernel version requirements"
> > "minimal kernel version requirement"
> I see we are using minimal in many places already. I think both wordings
> are correct. Just that 'maximal kernel version' sounded a bit odd to me.
> So please ignore my comment here.
Np.
> > > > + *
> > > > + * @max_kver: A maximal kernel version the test can run on. e.g. "7.2".
> > > s/maximal/maximum
> > dtto
> > > Also, I assume test will *not be skipped* on kernel versions
> > > 7.1.1, 7.1.2 etc just with
> > > .max_kver="7.1"
> > Good point, thanks => v3 (sigh).
> > check_max_kver() needs to have this condition to take an account the sublevel.
> > -if (tst_kvercmp(v1, v2, v3) > 0) {
> > +if (tst_kvercmp(v1, v2, v3) >= 1024) {
> > msg = "The test requires kernel %s or older";
> And will this be fine with -
> .max_kver="7.1.5"
> on SUT with v7.2.0 ?
Indeed, this will not be skipped. The reason is that for .max_kver="7.1"
(e.g. without the 3rd number) we want to behave like 7.1.1023 (i.e. 3rd number
being the highest possible number so that any 7.1 version is ok, which is
achieved by > 1024 instead of 0). If we want also .max_kver="7.1.5" compare
as is (i.e. 7.1.5), it should be something like (untested):
if (tst_kvercmp(v1, v2, v3) > (!v3 ? 1023 : 0)) {
msg = "The test requires kernel %s or older";
And that behavior would have to be for sure well documented.
WDYT?
> sorry, haven't tested yet.
> > ...
> > Sublevel can be above 255 since 4.4.256
> > https://lwn.net/ml/linux-kernel/20210208145805.898658055@linuxfoundation.org/
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9b82f13e7ef3
> > But it should be below 1024 (practically the highest sublevel has been 337).
> > Kind regards,
> > Petr
> > > maybe we should clarify.
> > > > *
> > > > * @supported_archs: A NULL terminated array of architectures the test runs on
> > > > * e.g. {"x86_64, "x86", NULL}. Calls tst_is_on_arch() to
> > > > @@ -551,6 +557,7 @@ struct tst_fs {
> > > > struct tst_option *options;
> > > > const char *min_kver;
> > > > + const char *max_kver;
> > > > const char *const *supported_archs;
> > > > diff --git a/lib/tst_test.c b/lib/tst_test.c
> > > > index 778a1fed40..fa38b3a7a3 100644
> > > > --- a/lib/tst_test.c
> > > > +++ b/lib/tst_test.c
> > > > @@ -1087,6 +1087,36 @@ static bool check_min_kver(const char *min_kver, const int brk_nosupp)
> > > > return true;
> > > > }
> > > > +/*
> > > > + * Check for the maximal required kernel version.
> > > > + *
> > > > + * return: true if the kernel version is low enough, false otherwise.
> > > This sounds a bit confusing. How about-
> > > Check the running kernel against the last version the test applies to.
> > Makes sense. Based on check_min_kver(), which was renamed from check_kver() in
> > the previous commit. Could you have look on these as well. Anyway, if you have
> > time, having a look on docs wording as a separate effort would help.
> sure, I will see if I find something worth reporting.
+1
> > > return: true if the kernel is old enough, false otherwise.
> > +1
> > > > + */
> > > > +static bool check_max_kver(const char *max_kver, const int brk_nosupp)
> > > > +{
> > > > + char *msg;
> > > > + int v1, v2, v3;
> > > > +
> > > > + if (tst_parse_kver(max_kver, &v1, &v2, &v3)) {
> > > > + tst_res(TWARN,
> > > > + "Invalid kernel version %s, expected %%d.%%d.%%d",
> > > I wouldn't say 'kernel version is invalid'. maybe test isn't
> > > supported/applicable on..
> > tst_parse_kver() returns 1 on error => this is really an error check.
> > Other thing is that the same error handling is on both places, but that's very
> > minor.
> sorry, my bad. I misunderstood this. Please ignore.
np.
Kind regards,
Petr
> > Kind regards,
> > Petr
> > ...
> > > Thanks,
> > > Avinesh
--
Mailing list info: https://lists.linux.it/listinfo/ltp
next prev parent reply other threads:[~2026-07-30 14:09 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-29 9:57 [LTP] [PATCH v2 0/5] Add support for .max_kver Petr Vorel
2026-07-29 9:57 ` [LTP] [PATCH v2 1/5] lib: Rename function check_kver() => check_min_kver() Petr Vorel
2026-07-30 8:58 ` Avinesh Kumar via ltp
2026-07-29 9:57 ` [LTP] [PATCH v2 2/5] lib: Add support for max_kver to struct tst_test and tst_fs Petr Vorel
2026-07-29 10:40 ` Avinesh Kumar via ltp
2026-07-29 13:36 ` Petr Vorel
2026-07-29 20:19 ` Avinesh Kumar via ltp
2026-07-30 14:08 ` Petr Vorel [this message]
2026-07-29 9:57 ` [LTP] [PATCH v2 3/5] execve04: Use .max_kver Petr Vorel
2026-07-29 9:57 ` [LTP] [PATCH v2 4/5] creat07: " Petr Vorel
2026-07-29 9:57 ` [LTP] [PATCH v2 5/5] fanotify20: Skip on v7.2 Petr Vorel
2026-07-29 10:26 ` Jan Kara
2026-07-29 15:47 ` [LTP] [PATCH v2 0/5] Add support for .max_kver Andrea Cervesato via ltp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260730140828.GA83115@pevik \
--to=pvorel@suse.cz \
--cc=avinesh.kumar@suse.com \
--cc=ltp@lists.linux.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox