From: Avinesh Kumar <akumar@suse.de>
To: ltp@lists.linux.it
Subject: Re: [LTP] [PATCH] lseek: Add negative tests for lseek
Date: Mon, 13 May 2024 13:31:20 +0200 [thread overview]
Message-ID: <2689176.lGaqSPkdTl@localhost> (raw)
In-Reply-To: <20240425052536.68290-1-xuyang2018.jy@fujitsu.com>
Hi Yang Xu,
Overall test looks fine. But I think we should enable this for all filesystems.
On Thursday, April 25, 2024 7:25:36 AM GMT+2 Yang Xu via ltp wrote:
> Add negative tests for lseek(), when errno is ENXIO
>
> Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
> ---
> runtest/syscalls | 1 +
> testcases/kernel/syscalls/lseek/.gitignore | 1 +
> testcases/kernel/syscalls/lseek/lseek12.c | 80 ++++++++++++++++++++++
> 3 files changed, 82 insertions(+)
> create mode 100644 testcases/kernel/syscalls/lseek/lseek12.c
>
> diff --git a/runtest/syscalls b/runtest/syscalls
> index 62eb4c1cd..7575b27b1 100644
> --- a/runtest/syscalls
> +++ b/runtest/syscalls
> @@ -726,6 +726,7 @@ lseek01 lseek01
> lseek02 lseek02
> lseek07 lseek07
> lseek11 lseek11
> +lseek12 lseek12
>
> lstat01A symlink01 -T lstat01
> lstat01A_64 symlink01 -T lstat01_64
> diff --git a/testcases/kernel/syscalls/lseek/.gitignore b/testcases/kernel/syscalls/lseek/.gitignore
> index 1dc1465ee..c49728607 100644
> --- a/testcases/kernel/syscalls/lseek/.gitignore
> +++ b/testcases/kernel/syscalls/lseek/.gitignore
> @@ -2,3 +2,4 @@
> /lseek02
> /lseek07
> /lseek11
> +/lseek12
> diff --git a/testcases/kernel/syscalls/lseek/lseek12.c b/testcases/kernel/syscalls/lseek/lseek12.c
> new file mode 100644
> index 000000000..9d80e632b
> --- /dev/null
> +++ b/testcases/kernel/syscalls/lseek/lseek12.c
> @@ -0,0 +1,80 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (c) 2024 FUJITSU LIMITED. All Rights Reserved.
> + * Author: Yang Xu <xuyang2018.jy@fujitsu.com>
> + */
> +
> +/*\
> + * [Description]
> + *
> + * Verify that lseek(2) fails with
> + *
> + * - ENXIO when whence is SEEK_DATA, file offset is beyond the end of the file
> + * - ENXIO when whence is SEEK_HOLE, file offset is beyond the end of the file
> + */
> +
> +#define _GNU_SOURCE
> +
> +#include <sys/types.h>
> +#include "tst_test.h"
> +#include "lapi/seek.h"
> +
> +#define TEST_ENXIO "test_enxio"
> +
> +static int fd_enxio;
> +
> +static struct test_case_t {
> + int *fd;
> + off_t offset;
> + int whence;
> + int expected_errno;
> + char *desc;
> +} tcases[] = {
> + {&fd_enxio, 10, SEEK_DATA, ENXIO,
> + "whence is SEEK_DATA, "
> + "file offset is beyond the end of the file"},
> + {&fd_enxio, 10, SEEK_HOLE, ENXIO,
> + "whence is SEEK_HOLE, "
> + "file offset is beyond the end of the file"},
> +};
> +
> +static void setup(void)
> +{
> + SAFE_TOUCH(TEST_ENXIO, 0777, NULL);
> + fd_enxio = SAFE_OPEN(TEST_ENXIO, O_RDWR, 0777);
> +}
> +
> +static void cleanup(void)
> +{
> + SAFE_CLOSE(fd_enxio);
> +}
> +
> +static void verify_lseek(unsigned int i)
> +{
> + struct test_case_t *tc = &tcases[i];
> + off_t offset;
> +
> + offset = lseek(*(tc->fd), tc->offset, tc->whence);
> + if (offset == -1) {
> + if (errno == EINVAL) {
> + tst_res(TCONF, "SEEK_DATA/SEEK_HOLE are not supported");
> + } else {
> + if (errno == tc->expected_errno) {
> + tst_res(TPASS | TERRNO, tc->desc);
> + } else {
> + tst_res(TFAIL | TERRNO,
> + "lseek() failed unexpectedly");
> + }
> + }
> + } else {
> + tst_res(TFAIL, "lseek() succeeded unexpectedly");
> + }
> +}
> +
> +static struct tst_test test = {
> + .setup = setup,
> + .cleanup = cleanup,
> + .tcnt = ARRAY_SIZE(tcases),
> + .test = verify_lseek,
> + .needs_tmpdir = 1,
> +};
>
Regards,
Avinesh
--
Mailing list info: https://lists.linux.it/listinfo/ltp
next prev parent reply other threads:[~2024-05-13 11:31 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-25 5:25 [LTP] [PATCH] lseek: Add negative tests for lseek Yang Xu via ltp
2024-05-13 11:31 ` Avinesh Kumar [this message]
2024-05-14 2:41 ` Yang Xu (Fujitsu) via ltp
2024-05-15 6:49 ` Petr Vorel
2025-01-14 11:58 ` Andrea Cervesato via ltp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2689176.lGaqSPkdTl@localhost \
--to=akumar@suse.de \
--cc=ltp@lists.linux.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox